Disassembling Macintosh IIsi Top Case

Report 4 Downloads 61 Views
Disassembling Macintosh IIsi Top Case

Disassembling Macintosh IIsi Top Case Written By: Chris Green

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 1 of 4

Disassembling Macintosh IIsi Top Case

INTRODUCTION This guide will show you how to remove the top case of the Macintosh IIsi

TOOLS: Phillips #0 Screwdriver (1)

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 2 of 4

Disassembling Macintosh IIsi Top Case

Step 1 — Top Case



Start by turning the computer around, and remove this #0 Phillips Screw.

 There may or may not be a Phillips #0 screw here, depending on whether or not the computer has ever been serviced.

Step 2



Now lift these two clips, and slowly pivot the case up.



You can now seperate the top of the computer from the rest of the machine.

To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-21 08:15:47 PM.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 3 of 4

Disassembling Macintosh IIsi Top Case

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 4 of 4