Disassembling Wii Balance Board
Disassembling Wii Balance Board
Disassembling Wii Balance Board Here's how to disassemble your Wii Balance Board.
Written By: Pete Marchetto
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 6
Disassembling Wii Balance Board
TOOLS: Phillips #1 Screwdriver (1)
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 6
Disassembling Wii Balance Board
Step 1 — Floor Unit
Unscrew these #1 Philips screws, and leave them in the plastic foot holders.
Remove the foot holders and place them on the side
Step 2
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 6
Disassembling Wii Balance Board
Step 3
Remove the four feet and place them on the side
Remove these #1 Philips screws, and leave them in their counterbores
Step 4
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 4 of 6
Disassembling Wii Balance Board
Step 5
Lift grey shell off and place to the side to reveal:
ADC and Logic board
Bluetooth module
Strain gauges
Battery holder
The ADC and Logic board contains:
Bluetooth module
Power button connector
Battery and sync button connector
Strain gauge wheatstone bridge connections
Step 6
The topmost connection for each of the four bridge connections is the ground; relative to this, the two middle connections should be at 1.2 VDC, and the bottom should be at 2.7 VDC
To reassemble your device, follow these instructions in reverse order. © iFixit — CC BY-NC-SA
www.iFixit.com
Page 5 of 6
Disassembling Wii Balance Board This document was last generated on 2017-06-21 09:12:32 PM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 6 of 6
Disassembling Wii Balance Board Here's how to disassemble your Wii Balance Board.
Written By: Pete Marchetto
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 6
Disassembling Wii Balance Board
TOOLS: Phillips #1 Screwdriver (1)
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 6
Disassembling Wii Balance Board
Step 1 — Floor Unit
Unscrew these #1 Philips screws, and leave them in the plastic foot holders.
Remove the foot holders and place them on the side
Step 2
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 6
Disassembling Wii Balance Board
Step 3
Remove the four feet and place them on the side
Remove these #1 Philips screws, and leave them in their counterbores
Step 4
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 4 of 6
Disassembling Wii Balance Board
Step 5
Lift grey shell off and place to the side to reveal:
ADC and Logic board
Bluetooth module
Strain gauges
Battery holder
The ADC and Logic board contains:
Bluetooth module
Power button connector
Battery and sync button connector
Strain gauge wheatstone bridge connections
Step 6
The topmost connection for each of the four bridge connections is the ground; relative to this, the two middle connections should be at 1.2 VDC, and the bottom should be at 2.7 VDC
To reassemble your device, follow these instructions in reverse order. © iFixit — CC BY-NC-SA
www.iFixit.com
Page 5 of 6
Disassembling Wii Balance Board This document was last generated on 2017-06-21 09:12:32 PM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 6 of 6
