0-10 PWM LOW VOLTAGE OUTPUT STATION-DIN
0-10 PWM LOW VOLTAGE OUTPUT STATION-DIN Load Controls
The 0-10 PWM Low Voltage Output Station-DIN is used for the control and automation of LED, CLF and CCFL lighting loads requiring either 0-10 or PWM for dimming control. Each LVOS DIN features eight 0-10 outputs with four that can be turned into PWM outputs. The LVOS DIN is firmware upgradable in the field through its station bus, has four dry contact inputs with two addtional override inputs and is powered by 13.8 to 36VDC. The dry contact inputs can be used with motion sensors, light sensors, pressure sensors,
IR
input,
magnetic
switches,
and
more.
Product Highlights • Controls up to eight separate sets of LED, CFL, or CCFL lighting loads • Offers control of either 0-10 or PWM type loads • Allows for the addition of dry contact inputs to the automation network including motion sensors, light sensor, IR input, pressure sensors magnetic switches, and more • Manual control and LED status for all eight outputs on front • Installs on DIN rail • Powered by 13.8 to 36VDC • Firmware upgradable in the field
ON
OFF
GND
3 4 IR SEN S
GND
2
OUT
1
OUT
LVOS-0-10PWM-DI N
OUT
S TATION BUS CLASS 2
OUT
0-10 PWM Low Voltage Output Station-DIN
SERIAL NUMBER
S TATION BUS CLASS 2
1
2
3
5
6
7
8
LOW VOLTAGE OUTPUT STATION-0-10-PWM-DIN
GN D
OU T
8 GN D
GN D
TOP VIEW
STATUS
7 GN D
OU T
6 OU T
GN D
5 OU T
OU T
GN D
4 GN D
3 OU T
2 GN D
1 OU T
INPUT 13.8-36 VDC
OU T
GN D
OU T
RED = 0-10 GREEN = PWM
4
2.28”
3.4”
SET
SIDE VIEW
LVOS-0-10-PWM-DIN 0-10: 10VDC@100mA MAX PWM: 12VDC@100mA MAX
6.18” FRONT VIEW
BOTTOM VIEW
Specifications Dimensions, HWD
3.4” x 6.18” x 2.28”
86mm x 157mm x 58mm
Model
LVOS-0-10-PWM-DIN
Weight
2lbs 8oz (1.13kg)
Mounting
DIN Rail
Ambient Operating Humidity
5-95% non-condensing
Ambient Operating Temperature
0-35°C (32-95°F)
Auxiliary Inputs
4 Dry Contacts
Override Inputs
2 (On and Off Contacts)
Input power
13.8 - 36VDC
Power Consumption
15W
LED Indicators
Microprocessor Status, Configuration, Load
Number of Low Voltage Loads
8 Low Voltage Loads
100mA Sink/Source (0-10)
100mA Source (PWM)
Station Equivalent
InFusion 0.35W on IC-24 / 0.55W on IC-36
Station Bus Connections
24V / 36V Station Bus
CE Listed
Yes
General Specifications
Wiring Specifications Station Bus Wiring
Minimum 2 conductor, 16 AWG stranded, non-shielded twisted pair, 30 pF/foot max, UL rated CL2
Station Bus Topology
Any combination of daisy chain or star or branch
Station Bus should be separated a minimum of 18” from other parallel communication
and/or high voltage runs
System Compatibility InFusion
Vantage emea nv/sa Binnendijk 40 | 9130 Beveren | Belgium T +32 (0) 3 773 31 06 | F +32 (0) 3 773 31 05 www.vantage-emea.com
The 0-10 PWM Low Voltage Output Station-DIN is used for the control and automation of LED, CLF and CCFL lighting loads requiring either 0-10 or PWM for dimming control. Each LVOS DIN features eight 0-10 outputs with four that can be turned into PWM outputs. The LVOS DIN is firmware upgradable in the field through its station bus, has four dry contact inputs with two addtional override inputs and is powered by 13.8 to 36VDC. The dry contact inputs can be used with motion sensors, light sensors, pressure sensors,
IR
input,
magnetic
switches,
and
more.
Product Highlights • Controls up to eight separate sets of LED, CFL, or CCFL lighting loads • Offers control of either 0-10 or PWM type loads • Allows for the addition of dry contact inputs to the automation network including motion sensors, light sensor, IR input, pressure sensors magnetic switches, and more • Manual control and LED status for all eight outputs on front • Installs on DIN rail • Powered by 13.8 to 36VDC • Firmware upgradable in the field
ON
OFF
GND
3 4 IR SEN S
GND
2
OUT
1
OUT
LVOS-0-10PWM-DI N
OUT
S TATION BUS CLASS 2
OUT
0-10 PWM Low Voltage Output Station-DIN
SERIAL NUMBER
S TATION BUS CLASS 2
1
2
3
5
6
7
8
LOW VOLTAGE OUTPUT STATION-0-10-PWM-DIN
GN D
OU T
8 GN D
GN D
TOP VIEW
STATUS
7 GN D
OU T
6 OU T
GN D
5 OU T
OU T
GN D
4 GN D
3 OU T
2 GN D
1 OU T
INPUT 13.8-36 VDC
OU T
GN D
OU T
RED = 0-10 GREEN = PWM
4
2.28”
3.4”
SET
SIDE VIEW
LVOS-0-10-PWM-DIN 0-10: 10VDC@100mA MAX PWM: 12VDC@100mA MAX
6.18” FRONT VIEW
BOTTOM VIEW
Specifications Dimensions, HWD
3.4” x 6.18” x 2.28”
86mm x 157mm x 58mm
Model
LVOS-0-10-PWM-DIN
Weight
2lbs 8oz (1.13kg)
Mounting
DIN Rail
Ambient Operating Humidity
5-95% non-condensing
Ambient Operating Temperature
0-35°C (32-95°F)
Auxiliary Inputs
4 Dry Contacts
Override Inputs
2 (On and Off Contacts)
Input power
13.8 - 36VDC
Power Consumption
15W
LED Indicators
Microprocessor Status, Configuration, Load
Number of Low Voltage Loads
8 Low Voltage Loads
100mA Sink/Source (0-10)
100mA Source (PWM)
Station Equivalent
InFusion 0.35W on IC-24 / 0.55W on IC-36
Station Bus Connections
24V / 36V Station Bus
CE Listed
Yes
General Specifications
Wiring Specifications Station Bus Wiring
Minimum 2 conductor, 16 AWG stranded, non-shielded twisted pair, 30 pF/foot max, UL rated CL2
Station Bus Topology
Any combination of daisy chain or star or branch
Station Bus should be separated a minimum of 18” from other parallel communication
and/or high voltage runs
System Compatibility InFusion
Vantage emea nv/sa Binnendijk 40 | 9130 Beveren | Belgium T +32 (0) 3 773 31 06 | F +32 (0) 3 773 31 05 www.vantage-emea.com
