2700K 3500 2700K 3500
HALO DESCRIPTION
Type
Catalog #
The Halo Surface LED Downlight (SLD) incorporates WaveStream™ technology to create an ultra-low profile surface mounting luminaire with the performance and look of a traditional downlight. SLD is designed for installation in many standard and fire-rated 4” x 2-1/8” deep square, octagon or round junction boxes. Supply wire adapter with LED quick wiring connector included. Suitable for residential or commercial installations. Ideal for closets, storage areas, attics and basements. Compliant with NFPA® 70, NEC® Section 410.16 (A)(3) and 410.16 (C)(5).
Project Date
Comments Prepared by
SPECIFICATION FEATURES
• L70 at 50,000 hours projected CONSTRUCTION in accordance with TM-21 • Die cast aluminum trim ring, and die formed aluminum frame WARRANTY Cooper Lighting provides a five OPTICS year limited warranty on the SLD • WaveStream™ technology LED provides uniform luminance from a low profile flat lens LED CHROMATICITY • AccuAim™ optics provide • A tight chromaticity specification directional control for the ensures LED color uniformity, “cone-of-light” beam distribution sustainable Color Rendering of a traditional downlight Index (CRI) and Correlated • Precision molded lens features Color Temperature (CCT) over high transmission polymer with the useful life of the LED UV stabilized protecting film • LED chromaticity of 3 SDCM exceeds ENERGY STAR® color ELECTRICAL JUNCTION BOX
dimmers with low end trim adjustment (Consult dimmer manufacturer for compatibility and details. Note some dimmers require a neutral in the wallbox.)
COMPLIANCE • SLD may be used in compatible electrical junction boxes in direct contact with insulation including spray foam insulation • UL listed cULus 1598 Type IC, suitable for direct contact with insulation • Suitable for use in closets, compliant with NFPA® 70, NEC® Section 410.16 (A)(3) and 410.16 standards per ANSI C78.377- MOUNTING (C)(5) 2008 • SLD may be used in compatible electrical junction boxes in direct • 90 CRI model features high color • cULus listed for damp locations (ceiling and wall). Wet location performance with R9 greater contact with insulation including listed (ceiling only). than 50 spray foam insulation • Airtight certified per ASTM E283 • Every Halo LED is quality • Suitable for installation in (not exceeding 2.0 CFM under 57 tested, measured, and many standard and fire-rated Pascals pressure difference) serialized in a permanent 4” square, octagon, and round • 90 CRI: Can be used to comply record to register lumens, electrical junction boxes with with California Title 24 High wattage, CRI and CCT. minimum 2-1/8” depth Efficacy requirements. Certified • Surface mounting in a fire-rated • Halo LED serialized testing and to California Title 20 Appliance measurement ensures color electrical box offers a costEfficiency Database. and lumen consistency on a effective alternative to fire-rated • 80 CRI: Can be used to comply per-unit basis, and validates recessed housings with California Title 24 Non long-term product consistency Note: Fire-rating is per listing of Residential Lighting Controls over time the junction box, not the SLD. requirements as a LED luminaire. • Installer must ensure ELECTRICAL CONNECTIONS • Can be used for International compatibility of fit, wiring and J u n c t i o n B ox Energy Conservation Code proper mounting in the • Supply Wire Adapter with LED (IECC) high efficiency luminaire electrical junction box. This quick connector included compliance. includes all applicable national • Can be used for Washington and local electrical and building LED DRIVER • Driver is 120V and dimmable. State Energy Code compliance codes • Driver is a high efficiency, • ENERGY STAR® qualified • Proprietary Slot-N-Lock quick electronic power supply luminaire - consult ENGERY installation system for junction providing DC power to the STAR® Qualified Product List box installation nominal LED array • EMI/RFI per FCC 47CFR Part • T-bracket with Slot-N-Lock • Driver features high power 15 Class B Consumer limits, mounting tabs included factor, low THD, and has integral suitable for use in residential and LED thermal protection in the event commercial installations • Trilateral linear LED assembly is of over temperature or internal • Contains no mercury or lead and integrated in trim perimeter failure. RoHS compliant. • Color Temperature: 3000K • Driver is replaceable if it should • Photometric testing in • CRI options: 80 and 90 be required. accordance with IES LM-79 - 90 CRI can be used for • Lumen maintenance projections DIMMING nominal California Title 24 compliance/ in accordance with IES LM-80 • SLD is designed for dimming 90CRI registered to Title 20 and TM-21 LED capability to nominally 10% with - 80 CRI can be used to comply many 120V Leading Edge (LE) Refer to Title ENERGY24 STAR Qualified Products List. with California Non- and (TE) Phase Can be used to comply with California Title 24 Trailing High EfficacyEdge requirements. Residential Lighting Controls Certified to California Title 20 Appliance Efficiency Database. Control dimmers. Dimming requirements as a LED nominal capability to 5% (80CRI) or 6% luminaire. (90CRI) is possible using select
4000K
3500K
3000K
CRI
2700K
80
2700K
SLD606830WHJB 80 CRI SLD606930WHJB 90 CRI 6” Surface LED Downlight Suitable for ceiling or wall electrical junction boxes E N E R G Y DATA Lumens Input Voltage Frequency
80 CRI
90 CRI
675
675
120V
120V
50/60 Hz
50/60 Hz
Input Current
0.15 A
0.15 A
Input Power
12.5 W
12.9 W
54 lm/W
52 lm/W
Efficiency THD
≤ 20%
Power Factor
≥ 0.90
T Ambient
-30 - +40°C
Sound Rating
≤ 22 dba
80 CRI
90
90 2700K
90
CRI
4000K
3500K
90 2700K
CRI
3000K
80
2700K
80 2700K
80CRI
CRI
4000K
3500K
3000K
CRI
2700K
®
90CRI
CRI
3000K 3500K
CRI
4000K
90 CRI
ominal CCT
80
2700K
3500K
CRI
3000K
Refer to ENERGY STAR® Qualified Products List. nominal Can be used to comply with California Title 24 High Efficacy requirements. Certified to California Title 20 Appliance Efficiency Database. 2700K
LED
Refer to ENERGY STAR® Qualified Products List. Can be used to comply with California Title 24 Non-Residential Lighting Controls requirements as a LED Luminaire.
ominal CCT
LED
2700K
ADV141376
3000K August 25, 2014 10:37 AM 3500K
SLD606830WHJB SLD606930WHJB
O R D E R I N G I N F ORMAT ION SAMPLE NUMBER: SLD606830WHJB Order junction box separately, as supplied by others, to complete installation.
Models
Color Rendering Index
Color Temperature (CCT)
Finish
SLD606= 6” Surface LED Downlight, 120V
8=80 CRI 9=90 CRI
30=3000K
WHJB=White
DIMENSIONS
LIGHTING FACTS SLD606830WH - 80 CRI
Ø 7.75” [197mm]
SLD606930WH - 90 CRI
Supply Wire Adapter (included) 0.7" [18mm] 1.5” [39mm] Ø 7.75” [197mm]
COMPATIBLE WITH EATON’S CROUSE-HINDS STANDARD / FIRE-RATED JUNCTION BOXES
TP316 for non-metallic cable 4” x 4” x 2-1/8” (102mm x 102mm x 54mm)
TP317 for metal clad cable 4” x 4” x 2-1/8” (102mm x 102mm x 54mm)
• TP316 - for non-metallic cable • TP317 - for metal clad cable • UL Listed • Two-hour fire-rated ANSI/UL 263 • Refer to www.crouse-hinds.com
COMPATIBLE WITH MANY OTHER STANDARD AND FIRE-RATED JUNCTION BOXES*
4" octagon light fixture/fan steel box 4" x 4" x 2-1/8" (102mm x 102mm x 54mm)
4" square deep steel box 4" x 4" x 2-1/8" (102mm x 102mm x 54mm)
4" round new work non-metallic light fixture/fan box 4" x 2-3/16" (102mm x 56mm)
4" round new work non-metallic box with hanger bar assembly 4" x 2-3/16" (102mm x 56mm)
*This is a representative list of compatible junction boxes only. Information contained in this literature about other manufacturers’ products is from published information made available by the manufacturer and is deemed to be reliable, but has not been verified. Cooper Lighting makes no specific recommendation on product selection and there are no warranties of performance or compatibility implied. Installer must determine that site conditions are suitable to allow proper installation of the SLD mounting bracket in the box. Eaton 1000 Eaton Boulevard Cleveland, OH 44122 United States Eaton.com
Eaton’s Cooper Lighting Business 1121 Highway 74 South Peachtree City, GA 30269 P: 770-486-4800 www.cooperlighting.com
Specifications and dimensions subject to change without notice.
Type
Catalog #
The Halo Surface LED Downlight (SLD) incorporates WaveStream™ technology to create an ultra-low profile surface mounting luminaire with the performance and look of a traditional downlight. SLD is designed for installation in many standard and fire-rated 4” x 2-1/8” deep square, octagon or round junction boxes. Supply wire adapter with LED quick wiring connector included. Suitable for residential or commercial installations. Ideal for closets, storage areas, attics and basements. Compliant with NFPA® 70, NEC® Section 410.16 (A)(3) and 410.16 (C)(5).
Project Date
Comments Prepared by
SPECIFICATION FEATURES
• L70 at 50,000 hours projected CONSTRUCTION in accordance with TM-21 • Die cast aluminum trim ring, and die formed aluminum frame WARRANTY Cooper Lighting provides a five OPTICS year limited warranty on the SLD • WaveStream™ technology LED provides uniform luminance from a low profile flat lens LED CHROMATICITY • AccuAim™ optics provide • A tight chromaticity specification directional control for the ensures LED color uniformity, “cone-of-light” beam distribution sustainable Color Rendering of a traditional downlight Index (CRI) and Correlated • Precision molded lens features Color Temperature (CCT) over high transmission polymer with the useful life of the LED UV stabilized protecting film • LED chromaticity of 3 SDCM exceeds ENERGY STAR® color ELECTRICAL JUNCTION BOX
dimmers with low end trim adjustment (Consult dimmer manufacturer for compatibility and details. Note some dimmers require a neutral in the wallbox.)
COMPLIANCE • SLD may be used in compatible electrical junction boxes in direct contact with insulation including spray foam insulation • UL listed cULus 1598 Type IC, suitable for direct contact with insulation • Suitable for use in closets, compliant with NFPA® 70, NEC® Section 410.16 (A)(3) and 410.16 standards per ANSI C78.377- MOUNTING (C)(5) 2008 • SLD may be used in compatible electrical junction boxes in direct • 90 CRI model features high color • cULus listed for damp locations (ceiling and wall). Wet location performance with R9 greater contact with insulation including listed (ceiling only). than 50 spray foam insulation • Airtight certified per ASTM E283 • Every Halo LED is quality • Suitable for installation in (not exceeding 2.0 CFM under 57 tested, measured, and many standard and fire-rated Pascals pressure difference) serialized in a permanent 4” square, octagon, and round • 90 CRI: Can be used to comply record to register lumens, electrical junction boxes with with California Title 24 High wattage, CRI and CCT. minimum 2-1/8” depth Efficacy requirements. Certified • Surface mounting in a fire-rated • Halo LED serialized testing and to California Title 20 Appliance measurement ensures color electrical box offers a costEfficiency Database. and lumen consistency on a effective alternative to fire-rated • 80 CRI: Can be used to comply per-unit basis, and validates recessed housings with California Title 24 Non long-term product consistency Note: Fire-rating is per listing of Residential Lighting Controls over time the junction box, not the SLD. requirements as a LED luminaire. • Installer must ensure ELECTRICAL CONNECTIONS • Can be used for International compatibility of fit, wiring and J u n c t i o n B ox Energy Conservation Code proper mounting in the • Supply Wire Adapter with LED (IECC) high efficiency luminaire electrical junction box. This quick connector included compliance. includes all applicable national • Can be used for Washington and local electrical and building LED DRIVER • Driver is 120V and dimmable. State Energy Code compliance codes • Driver is a high efficiency, • ENERGY STAR® qualified • Proprietary Slot-N-Lock quick electronic power supply luminaire - consult ENGERY installation system for junction providing DC power to the STAR® Qualified Product List box installation nominal LED array • EMI/RFI per FCC 47CFR Part • T-bracket with Slot-N-Lock • Driver features high power 15 Class B Consumer limits, mounting tabs included factor, low THD, and has integral suitable for use in residential and LED thermal protection in the event commercial installations • Trilateral linear LED assembly is of over temperature or internal • Contains no mercury or lead and integrated in trim perimeter failure. RoHS compliant. • Color Temperature: 3000K • Driver is replaceable if it should • Photometric testing in • CRI options: 80 and 90 be required. accordance with IES LM-79 - 90 CRI can be used for • Lumen maintenance projections DIMMING nominal California Title 24 compliance/ in accordance with IES LM-80 • SLD is designed for dimming 90CRI registered to Title 20 and TM-21 LED capability to nominally 10% with - 80 CRI can be used to comply many 120V Leading Edge (LE) Refer to Title ENERGY24 STAR Qualified Products List. with California Non- and (TE) Phase Can be used to comply with California Title 24 Trailing High EfficacyEdge requirements. Residential Lighting Controls Certified to California Title 20 Appliance Efficiency Database. Control dimmers. Dimming requirements as a LED nominal capability to 5% (80CRI) or 6% luminaire. (90CRI) is possible using select
4000K
3500K
3000K
CRI
2700K
80
2700K
SLD606830WHJB 80 CRI SLD606930WHJB 90 CRI 6” Surface LED Downlight Suitable for ceiling or wall electrical junction boxes E N E R G Y DATA Lumens Input Voltage Frequency
80 CRI
90 CRI
675
675
120V
120V
50/60 Hz
50/60 Hz
Input Current
0.15 A
0.15 A
Input Power
12.5 W
12.9 W
54 lm/W
52 lm/W
Efficiency THD
≤ 20%
Power Factor
≥ 0.90
T Ambient
-30 - +40°C
Sound Rating
≤ 22 dba
80 CRI
90
90 2700K
90
CRI
4000K
3500K
90 2700K
CRI
3000K
80
2700K
80 2700K
80CRI
CRI
4000K
3500K
3000K
CRI
2700K
®
90CRI
CRI
3000K 3500K
CRI
4000K
90 CRI
ominal CCT
80
2700K
3500K
CRI
3000K
Refer to ENERGY STAR® Qualified Products List. nominal Can be used to comply with California Title 24 High Efficacy requirements. Certified to California Title 20 Appliance Efficiency Database. 2700K
LED
Refer to ENERGY STAR® Qualified Products List. Can be used to comply with California Title 24 Non-Residential Lighting Controls requirements as a LED Luminaire.
ominal CCT
LED
2700K
ADV141376
3000K August 25, 2014 10:37 AM 3500K
SLD606830WHJB SLD606930WHJB
O R D E R I N G I N F ORMAT ION SAMPLE NUMBER: SLD606830WHJB Order junction box separately, as supplied by others, to complete installation.
Models
Color Rendering Index
Color Temperature (CCT)
Finish
SLD606= 6” Surface LED Downlight, 120V
8=80 CRI 9=90 CRI
30=3000K
WHJB=White
DIMENSIONS
LIGHTING FACTS SLD606830WH - 80 CRI
Ø 7.75” [197mm]
SLD606930WH - 90 CRI
Supply Wire Adapter (included) 0.7" [18mm] 1.5” [39mm] Ø 7.75” [197mm]
COMPATIBLE WITH EATON’S CROUSE-HINDS STANDARD / FIRE-RATED JUNCTION BOXES
TP316 for non-metallic cable 4” x 4” x 2-1/8” (102mm x 102mm x 54mm)
TP317 for metal clad cable 4” x 4” x 2-1/8” (102mm x 102mm x 54mm)
• TP316 - for non-metallic cable • TP317 - for metal clad cable • UL Listed • Two-hour fire-rated ANSI/UL 263 • Refer to www.crouse-hinds.com
COMPATIBLE WITH MANY OTHER STANDARD AND FIRE-RATED JUNCTION BOXES*
4" octagon light fixture/fan steel box 4" x 4" x 2-1/8" (102mm x 102mm x 54mm)
4" square deep steel box 4" x 4" x 2-1/8" (102mm x 102mm x 54mm)
4" round new work non-metallic light fixture/fan box 4" x 2-3/16" (102mm x 56mm)
4" round new work non-metallic box with hanger bar assembly 4" x 2-3/16" (102mm x 56mm)
*This is a representative list of compatible junction boxes only. Information contained in this literature about other manufacturers’ products is from published information made available by the manufacturer and is deemed to be reliable, but has not been verified. Cooper Lighting makes no specific recommendation on product selection and there are no warranties of performance or compatibility implied. Installer must determine that site conditions are suitable to allow proper installation of the SLD mounting bracket in the box. Eaton 1000 Eaton Boulevard Cleveland, OH 44122 United States Eaton.com
Eaton’s Cooper Lighting Business 1121 Highway 74 South Peachtree City, GA 30269 P: 770-486-4800 www.cooperlighting.com
Specifications and dimensions subject to change without notice.
