2F Condulet® Single Gang Device Boxes - Cast Iron or Aluminum
24-25.qxp
12/23/2013
2:35 PM
Page 25
Condulet® Single Gang Device Boxes Cast Iron or Aluminum
Accessories see pages 37–45
2F
With and Without Mounting Lugs for Threaded Rigid and IMC Conduit Options: Description Finishes: Corro-free™ epoxy powder coat - external body Corro-free™ epoxy powder coat - internal and external Hot dipped galvanized
2F
Applications: Cast device boxes are installed to: • Accommodate wiring devices • Act as pull boxes for conductors in a conduit system • Provide openings to make splices and taps in conductors • Provide access to conductors for maintenance and future system changes • Connect conduit sections • FSY boxes for mounting surface devices on floor or bench (used with single gang covers)
Suffix
S752 S753 HDG
Size Ranges: • Hubs – 1/ 2" to 1"
Die Cast Aluminum‡
FS & FD
Features: • Internal green ground screw standard on boxes • Suitable for use in wet locations when used with gasketed covers • Mounting lugs standard on most boxes • Tapered threaded hubs (NPT) with integral bushing • Available for surface mounting (with mounting lugs) or flush mounting (without mounting lugs) as listed • Available as shallow (FS) or deep (FD) configuration. Use FD if device to be enclosed exceeds 15/ 8" in depth • Ample wiring room provided in either FS or FD configuration • Wide selection of surface or flush covers available in three materials (sheet steel, Feraloy®, aluminum) • Covers for flush mounting extend to conceal the rough plaster line • Available in single gang and multi-gang configurations with hubs, and as blank bodies for drilled and tapped openings
Certifications and Compliances: • • • •
UL Standard: 514 ANSI Standard: C33.84 Fed. Spec.: W-C-5860 CSA Standard: C22.2 No. 18
Size
Cat. #
Cat. #
/2 3 /4
FS1 SA FS2 SA
FSC1 SA FSC2 SA
1
Size
Cat. #
Cat. #
/2 /4 1
FS1* FS2* FS3†
FD1† FD2† FD3†
1 3
Size
Cat. #
Cat. #
1
/2 3 /4
FSR1 FSR2
FDR1 FDR2*†
Size
Cat. #
Cat. #
1
/2 3 /4 1
FSC1* FSC2* FSC3†
FDC1† FDC2† FDC3†
Size
Cat. #
Cat. #
/2 3 /4
FSL1 FSL2
FDL1 FDL2*†
‡Mounting lugs and ground screw are not offered with standard die cast aluminum box. For sand cast aluminum box with mounting lugs and ground screw, change "SA" in catalog number to "SCA" (Example: FS1 SCA).
Standard Materials: • Feraloy iron alloy or copper-free aluminum.
Standard Finishes: • Feraloy – electrogalvanized and aluminum acrylic paint • Aluminum – natural
1
*Available in sand cast copper-free aluminum – add suffix SCA to Cat. No. †Available in sand cast copper-free aluminum – add suffix SA to Cat. No.
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2013 Eaton’s Crouse-Hinds Business
25
26-27.qxp
12/23/2013
2F
2:35 PM
Page 26
Condulet® Single Gang Device Boxes Cast Iron or Aluminum
Accessories see pages 37–45
2F
With and Without Mounting Lugs for Threaded Rigid and IMC Conduit FS & FD
Dimensions In Inches:
Size
Cat. #†
Cat. #†
1
/2 3 /4
FSA1 FSA2
FDA1 FDA2
Size
Cat. #†
Cat. #†
/2 3 /4 1
FSS1* FSS2* FSS3
FDD1 FDD2* FDD3
1
Series FS
Hub Size 1 /2 3 /4 1
a
b
c
d
/8 7 /8 1
17/8 17/8 17/8
111/16 111/16 111/16
5
/2 /4 1
/8 /8 1
211/16 211/16 211/16
21/2 21/2 21/2
5
1
Size
Cat. #
Cat. #
/2 /4
FSCC1 FSCC2
FDCC1 FDCC2
1 3
Size
Cat. #
/2 3 /4
FSCA1 FSCA2
Size
Cat. #†
/4
FSSA2
1
3
Size
Cat. #
Cat. #
/2 3 /4
FSLA1 FSLA2
FDLA1 FDLA2
1
FD
3
7
7 7
*Available in copper-free aluminum; add suffix "SA". †Mounting lugs not available.
26
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2013 Eaton’s Crouse-Hinds Business
/8 /4 7 /8 3
/8 /4 /8
3 7
26-27.qxp
12/23/2013
2:35 PM
Page 27
Condulet® Single Gang Device Boxes Cast Iron or Aluminum
2F
Accessories see pages 37–45
With and Without Mounting Lugs for Threaded Rigid and IMC Conduit
Size /2 /4 1
1 3
FDXC†
FSY
Cat. # FSCT1 FSCT2* FSCT3
2F
FS & FD
Cat. #
Hub Size
Cat. #‡
FDCT1 FDCT2* FDCT3
3
/4
FDXC219
Description
Hub Size
Cat. # ‡
Single face Double face
1 1
FSY311 FSY312
Dimensions In Inches:
Size
Cat. #
Cat. #
/2 3 /4 1
FST1* FST2*
FDT1 FDT2 FDT3
1
FSCT, FSX, FST, FSCD
Size
Cat. #
Cat. #
/2 3 /4 1
FSX1 FSX2
FDX1 FDX2 FDX3
1
Size
Cat. #‡
/2 3 /4
FSCD1 FSCD2
1
*Available in copper-free aluminum; add suffix "SA". †6 Hubs – all 3/ 4" pipe tap. ‡ Not avaliable with mounting lugs.
FSY
FDXC
FSCT, FSX, FST, FSCD Series FS
Hub Size
a
b
c
d
/2 3 /4 1
7
/8 7 /8 1
17/8 17/8 17/8
111/16 111/16 111/16
5
1
/8 /4 7 /8 3
FSY Description Single gang, single face
Hub Size
a
b
1
23/4
115/16
Single gang, double face
1
23/4
33/8
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2013 Eaton’s Crouse-Hinds Business
27
28-29.qxp
12/23/2013
2F
2:36 PM
Page 28
Condulet® Single Gang Device Boxes Cast Iron or Aluminum
Accessories see pages 37–45
2F
With and Without Mounting Lugs FS
Double Face
Double Face Size
Cat. #†
Size
Cat. #†
/2 3 /4
FS152 FS252
1
/2 3 /4
FSC152 FSC252
1
†Mounting lugs not available.
Dimensions In Inches:
Double face Series FS
28
Hub Size
a
b
c
/2 3 /4
35/16 311/16
31/8 31/2
11/4 11/2
1
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2013 Eaton’s Crouse-Hinds Business
12/23/2013
2:35 PM
Page 25
Condulet® Single Gang Device Boxes Cast Iron or Aluminum
Accessories see pages 37–45
2F
With and Without Mounting Lugs for Threaded Rigid and IMC Conduit Options: Description Finishes: Corro-free™ epoxy powder coat - external body Corro-free™ epoxy powder coat - internal and external Hot dipped galvanized
2F
Applications: Cast device boxes are installed to: • Accommodate wiring devices • Act as pull boxes for conductors in a conduit system • Provide openings to make splices and taps in conductors • Provide access to conductors for maintenance and future system changes • Connect conduit sections • FSY boxes for mounting surface devices on floor or bench (used with single gang covers)
Suffix
S752 S753 HDG
Size Ranges: • Hubs – 1/ 2" to 1"
Die Cast Aluminum‡
FS & FD
Features: • Internal green ground screw standard on boxes • Suitable for use in wet locations when used with gasketed covers • Mounting lugs standard on most boxes • Tapered threaded hubs (NPT) with integral bushing • Available for surface mounting (with mounting lugs) or flush mounting (without mounting lugs) as listed • Available as shallow (FS) or deep (FD) configuration. Use FD if device to be enclosed exceeds 15/ 8" in depth • Ample wiring room provided in either FS or FD configuration • Wide selection of surface or flush covers available in three materials (sheet steel, Feraloy®, aluminum) • Covers for flush mounting extend to conceal the rough plaster line • Available in single gang and multi-gang configurations with hubs, and as blank bodies for drilled and tapped openings
Certifications and Compliances: • • • •
UL Standard: 514 ANSI Standard: C33.84 Fed. Spec.: W-C-5860 CSA Standard: C22.2 No. 18
Size
Cat. #
Cat. #
/2 3 /4
FS1 SA FS2 SA
FSC1 SA FSC2 SA
1
Size
Cat. #
Cat. #
/2 /4 1
FS1* FS2* FS3†
FD1† FD2† FD3†
1 3
Size
Cat. #
Cat. #
1
/2 3 /4
FSR1 FSR2
FDR1 FDR2*†
Size
Cat. #
Cat. #
1
/2 3 /4 1
FSC1* FSC2* FSC3†
FDC1† FDC2† FDC3†
Size
Cat. #
Cat. #
/2 3 /4
FSL1 FSL2
FDL1 FDL2*†
‡Mounting lugs and ground screw are not offered with standard die cast aluminum box. For sand cast aluminum box with mounting lugs and ground screw, change "SA" in catalog number to "SCA" (Example: FS1 SCA).
Standard Materials: • Feraloy iron alloy or copper-free aluminum.
Standard Finishes: • Feraloy – electrogalvanized and aluminum acrylic paint • Aluminum – natural
1
*Available in sand cast copper-free aluminum – add suffix SCA to Cat. No. †Available in sand cast copper-free aluminum – add suffix SA to Cat. No.
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2013 Eaton’s Crouse-Hinds Business
25
26-27.qxp
12/23/2013
2F
2:35 PM
Page 26
Condulet® Single Gang Device Boxes Cast Iron or Aluminum
Accessories see pages 37–45
2F
With and Without Mounting Lugs for Threaded Rigid and IMC Conduit FS & FD
Dimensions In Inches:
Size
Cat. #†
Cat. #†
1
/2 3 /4
FSA1 FSA2
FDA1 FDA2
Size
Cat. #†
Cat. #†
/2 3 /4 1
FSS1* FSS2* FSS3
FDD1 FDD2* FDD3
1
Series FS
Hub Size 1 /2 3 /4 1
a
b
c
d
/8 7 /8 1
17/8 17/8 17/8
111/16 111/16 111/16
5
/2 /4 1
/8 /8 1
211/16 211/16 211/16
21/2 21/2 21/2
5
1
Size
Cat. #
Cat. #
/2 /4
FSCC1 FSCC2
FDCC1 FDCC2
1 3
Size
Cat. #
/2 3 /4
FSCA1 FSCA2
Size
Cat. #†
/4
FSSA2
1
3
Size
Cat. #
Cat. #
/2 3 /4
FSLA1 FSLA2
FDLA1 FDLA2
1
FD
3
7
7 7
*Available in copper-free aluminum; add suffix "SA". †Mounting lugs not available.
26
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2013 Eaton’s Crouse-Hinds Business
/8 /4 7 /8 3
/8 /4 /8
3 7
26-27.qxp
12/23/2013
2:35 PM
Page 27
Condulet® Single Gang Device Boxes Cast Iron or Aluminum
2F
Accessories see pages 37–45
With and Without Mounting Lugs for Threaded Rigid and IMC Conduit
Size /2 /4 1
1 3
FDXC†
FSY
Cat. # FSCT1 FSCT2* FSCT3
2F
FS & FD
Cat. #
Hub Size
Cat. #‡
FDCT1 FDCT2* FDCT3
3
/4
FDXC219
Description
Hub Size
Cat. # ‡
Single face Double face
1 1
FSY311 FSY312
Dimensions In Inches:
Size
Cat. #
Cat. #
/2 3 /4 1
FST1* FST2*
FDT1 FDT2 FDT3
1
FSCT, FSX, FST, FSCD
Size
Cat. #
Cat. #
/2 3 /4 1
FSX1 FSX2
FDX1 FDX2 FDX3
1
Size
Cat. #‡
/2 3 /4
FSCD1 FSCD2
1
*Available in copper-free aluminum; add suffix "SA". †6 Hubs – all 3/ 4" pipe tap. ‡ Not avaliable with mounting lugs.
FSY
FDXC
FSCT, FSX, FST, FSCD Series FS
Hub Size
a
b
c
d
/2 3 /4 1
7
/8 7 /8 1
17/8 17/8 17/8
111/16 111/16 111/16
5
1
/8 /4 7 /8 3
FSY Description Single gang, single face
Hub Size
a
b
1
23/4
115/16
Single gang, double face
1
23/4
33/8
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2013 Eaton’s Crouse-Hinds Business
27
28-29.qxp
12/23/2013
2F
2:36 PM
Page 28
Condulet® Single Gang Device Boxes Cast Iron or Aluminum
Accessories see pages 37–45
2F
With and Without Mounting Lugs FS
Double Face
Double Face Size
Cat. #†
Size
Cat. #†
/2 3 /4
FS152 FS252
1
/2 3 /4
FSC152 FSC252
1
†Mounting lugs not available.
Dimensions In Inches:
Double face Series FS
28
Hub Size
a
b
c
/2 3 /4
35/16 311/16
31/8 31/2
11/4 11/2
1
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2013 Eaton’s Crouse-Hinds Business
