2TouchPOS Replacing the Hard Drive User
2TouchPOS Replacing the Hard Drive User’s Guide
2013 Xenios LLC 82 Saint Paul Street Rochester, NY 14604 Phone 585.325.5242 • Fax 585.325.6989
Contents About this Document .................................................................................................................. 3 Hard Drive Replacement ............................................................................................................. 4
Xenios LLC @2013
Page 2
About this Document This document was written for 2TouchPOS version 3.03.4900.
Xenios LLC @2013
Page 3
Hard Drive Replacement 1. First, you will turn off the power to your Posiflex terminal. Tilted the Posiflex terminal back and unplug power cable.
Xenios LLC @2013
Page 4
2. In the front part of your Posiflex terminal, there is a plastic plate; you will remove plastic plate to expose the hard drive. Press down on the clip release and remove plastic plate.
3. Using a Phillips head screwdriver, unscrew the single screw.
Xenios LLC @2013
Page 5
4. Pull down on the metal bar and slide hard drive tray out.
Xenios LLC @2013
Page 6
5. Unscrew all four screws and remove the old hard drive.
Xenios LLC @2013
Page 7
6. Place new drive in tray with screw holes marching up with tray screw holes. 7. Screw in all four screws.
Xenios LLC @2013
Page 8
8. Slide hard drive tray back into the base station. You will hear a snapping noise. Push the metal bar back up to an upright position. Screw in the screw. Place plastic plate back on base station. Plug in power cable to Posiflex terminal.
Xenios LLC @2013
Page 9
2013 Xenios LLC 82 Saint Paul Street Rochester, NY 14604 Phone 585.325.5242 • Fax 585.325.6989
Contents About this Document .................................................................................................................. 3 Hard Drive Replacement ............................................................................................................. 4
Xenios LLC @2013
Page 2
About this Document This document was written for 2TouchPOS version 3.03.4900.
Xenios LLC @2013
Page 3
Hard Drive Replacement 1. First, you will turn off the power to your Posiflex terminal. Tilted the Posiflex terminal back and unplug power cable.
Xenios LLC @2013
Page 4
2. In the front part of your Posiflex terminal, there is a plastic plate; you will remove plastic plate to expose the hard drive. Press down on the clip release and remove plastic plate.
3. Using a Phillips head screwdriver, unscrew the single screw.
Xenios LLC @2013
Page 5
4. Pull down on the metal bar and slide hard drive tray out.
Xenios LLC @2013
Page 6
5. Unscrew all four screws and remove the old hard drive.
Xenios LLC @2013
Page 7
6. Place new drive in tray with screw holes marching up with tray screw holes. 7. Screw in all four screws.
Xenios LLC @2013
Page 8
8. Slide hard drive tray back into the base station. You will hear a snapping noise. Push the metal bar back up to an upright position. Screw in the screw. Place plastic plate back on base station. Plug in power cable to Posiflex terminal.
Xenios LLC @2013
Page 9
