3.0L Alpha TKS Installation Drawing
CIRCUIT BREAKER
2–1/4 [57] MAX. 2 [51] MIN. (3)
SHIFT CABLE CONNECTION OPTIONAL REMOTE OIL FILTER
OPTIONAL MERCATHODE
14 81 [358] (1)
7 [302] 11 8 (1)
OIL FILL CAP STEERING CABLE CONNECTION TO POWER STEERING
3 [247] 94
OPTIONAL CLOSED COOLING SYSTEM DRIVE OIL RESERVOIR
THROTTLE CABLE CONNECTION
OIL GUAGE
POWER STEERING PUMP (OPTIONAL)
5 [474] 18 8
17 3 8 [442]
5 [516] 20 16 (1) OIL FILTER 441 [108] CRANKSHAFT C.L.
MCM 3.0L ALPHA
7 [188] 716 (1)
(–)BATTERY TERMINAL CONNECTION ELECTRICAL HARNESS RECEPTACLE 4 [102]
(+) BATTERY TERMINAL CONNECTION QUICK OIL DRAIN
FUEL INLET 1/8–27 NPTF THD.
1 [698] 27 2
821 [216]
HEAT EXCHANGER FOR OPTIONAL CLOSED COOLING
3 [273] 10 4 CENTERS PART NO. 32778
13° 421 [114]
3 [146] 54
881 [206]
3 [248] 94
1 [266] 10 2 (ALTERNATOR)
3 [258] 10 16
9 [268] 10 16 (HEAT EXCHANGER BRACKET)
3 [730] 28 4
17/32 (2 HOLES) ALL MOUNTS ADJUST 1/2” [13] UP OR DOWN
Kit Only
7 [149] 58
90-862917
621 [165] (CENTERS) OPTIONAL FRONT MOUNT PART NO. 76409F1
UNIT OF MEASURE in. (mm)
SCALE APROX. 1” = 1’ 25.4mm = 304mm
MCM 3.0L NOTES: (1) DIMENSIONS REQUIRE A MINIMUM 1/2 in. (13mm) CLEARANCE FOR MOTOR MOUNT DEFLECTION. (2) SELECT THE APPROPRIATE EXHAUST RISE–HEIGHT TO MAINTAIN A MINIMUM OF 11 in. (279mm) BETWEEN THE TOP OF THE EXHAUST ELBOW AND THE WATERLINE OF THE BOAT AT MAXIMUM RATED LOAD. (3) INNER AND OUTER SURFACES OF TRANSOM MUST BE PARALLEL WITHIN 1/8 in. (3mm) IN AREA COVERED BY TRANSOM PLATES AND REMAIN WITHIN TRANSOM THICKNESS LIMITS. (4) FOR EXACT LOCATION OF CAVITATION PLATE IN RELATION TO BOAT BOTTOM, REFER TO INSTALLATION INSTRUCTIONS. (5) NUMBERS INSIDE BRACKETS ”[]” ARE IN MILLIMETERS.
2–1/4 [57] MAX. 2 [51] MIN. (3)
SHIFT CABLE CONNECTION OPTIONAL REMOTE OIL FILTER
OPTIONAL MERCATHODE
14 81 [358] (1)
7 [302] 11 8 (1)
OIL FILL CAP STEERING CABLE CONNECTION TO POWER STEERING
3 [247] 94
OPTIONAL CLOSED COOLING SYSTEM DRIVE OIL RESERVOIR
THROTTLE CABLE CONNECTION
OIL GUAGE
POWER STEERING PUMP (OPTIONAL)
5 [474] 18 8
17 3 8 [442]
5 [516] 20 16 (1) OIL FILTER 441 [108] CRANKSHAFT C.L.
MCM 3.0L ALPHA
7 [188] 716 (1)
(–)BATTERY TERMINAL CONNECTION ELECTRICAL HARNESS RECEPTACLE 4 [102]
(+) BATTERY TERMINAL CONNECTION QUICK OIL DRAIN
FUEL INLET 1/8–27 NPTF THD.
1 [698] 27 2
821 [216]
HEAT EXCHANGER FOR OPTIONAL CLOSED COOLING
3 [273] 10 4 CENTERS PART NO. 32778
13° 421 [114]
3 [146] 54
881 [206]
3 [248] 94
1 [266] 10 2 (ALTERNATOR)
3 [258] 10 16
9 [268] 10 16 (HEAT EXCHANGER BRACKET)
3 [730] 28 4
17/32 (2 HOLES) ALL MOUNTS ADJUST 1/2” [13] UP OR DOWN
Kit Only
7 [149] 58
90-862917
621 [165] (CENTERS) OPTIONAL FRONT MOUNT PART NO. 76409F1
UNIT OF MEASURE in. (mm)
SCALE APROX. 1” = 1’ 25.4mm = 304mm
MCM 3.0L NOTES: (1) DIMENSIONS REQUIRE A MINIMUM 1/2 in. (13mm) CLEARANCE FOR MOTOR MOUNT DEFLECTION. (2) SELECT THE APPROPRIATE EXHAUST RISE–HEIGHT TO MAINTAIN A MINIMUM OF 11 in. (279mm) BETWEEN THE TOP OF THE EXHAUST ELBOW AND THE WATERLINE OF THE BOAT AT MAXIMUM RATED LOAD. (3) INNER AND OUTER SURFACES OF TRANSOM MUST BE PARALLEL WITHIN 1/8 in. (3mm) IN AREA COVERED BY TRANSOM PLATES AND REMAIN WITHIN TRANSOM THICKNESS LIMITS. (4) FOR EXACT LOCATION OF CAVITATION PLATE IN RELATION TO BOAT BOTTOM, REFER TO INSTALLATION INSTRUCTIONS. (5) NUMBERS INSIDE BRACKETS ”[]” ARE IN MILLIMETERS.
