400 Series Installation - cloudfront.net
801 Avenida Acaso, Camarillo, Ca. 93012 • (805) 494-0622 • www.sdcsecurity.com • E-mail: [email protected]
INSTALLATION INSTRUCTIONS 410/420 SERIES PUSH SWITCH
ORG (N/C)
Electrical Specifications Contact Type: SPDT (Form C) Contact Ratings: 30VDC @ 5 AMPS (Resistive)
WHT (COM) YEL (N/O)
RED LAMP 28VDC MAX RED
P:\INSTALLATION INST\Push and Key Switch\INST-410-420.vsd
REV A
03-11
Page 1
Any suggestions or comments to this instruction or product are welcome. Please contact us through our website or email [email protected]
3580 Willow Lane, Westlake Village, CA 91361-4921 • (805) 494-0622 • Fax: (805) 494-8861 www.sdcsecurity.com • E-mail: [email protected]
INSTALLATION INSTRUCTIONS MODEL 422 PUSH SWITCH
422GPE
422NGPE
ORG (N/C)
Electrical Specifications Contact Type: SPDT (Form C) Contact Ratings: 30VDC @ 5 AMPS (Resistive)
WHT (COM) YEL (N/O)
RED LAMP 28VDC MAX RED
P:\INSTALLATION INST\Push and Key Switch\INST- 422.vsd
0305
Page 1
Any suggestions or comments to this instruction or product are welcome. Please contact us through our website or email [email protected]
SECURITY DOOR CONTROLS
801 Avenida Acaso, Camarillo, CA 93012 • (805) 494-0622 www.sdcsecurity.com • E-mail: [email protected]
INSTALLATION INSTRUCTIONS MODEL 413NU & 423U PUSH SWITCH 1-60 SECOND ADJUSTABLE TIME DELAY When the button is pressed, the lock releases for 1-60 seconds. If pressed again during the lock release period, the unit will “Retrigger” starting a new release period.
Electrical Specifications Input Voltage : 12/24VDC @90ma. LED Indicator : 12/24VDC @ 10/20ma Output Relay: DPDT Max Load : 30VDC @ 5 AMP (Resistive)
1-60 SEC TIMER ADJ POT
423U
413NU
TYPICAL WIRING +
POWER SUPPLY
-
+
-
12/24VDC
BLK TIMER RED + POWER YEL/BLK NO WHT/BLK COM B ORG/BLK NC YEL NO WHT COM A ORG NC VIO LED BLU
12/24VDC
BLK TIMER RED + POWER YEL/BLK NO WHT/BLK COM B ORG/BLK NC YEL NO WHT COM A ORG NC VIO LED BLU
413NU OR 423U MANUAL RELEASE DEVICE
MD-31D FAIL SAFE REQUEST-TO-EXIT SENSOR DEVICE
NC C NO
POWER SUPPLY
413NU OR 423U MANUAL RELEASE DEVICE
MD-31D FAIL SAFE REQUEST-TO-EXIT SENSOR DEVICE
NC C NO
NC C NO V- V+
NC C NO V- V+
ACCESS CONTROL
POWER SUPPLY
ACCESS CONTROL
MD-31D
NC
POWER SUPPLY MD-31D
NC
EMLOCK
NO
NO
C
FAIL-SAFE LOCK
1 4
POWER
+
-
P:\INSTALLATION INST\Push and Key Switch\INST-413NU-423U.vsd
2 5
3 6
7
8
9
*
0
#
FAIL SECURE LOCK
PUSH TO EXIT
ACCESS 413NU CONTROL OR 423U
REV E
C
10-13
POWER
Page 1
+
-
ELECTRIC STRIKE
1
2
4
5
3 6
7
8
9
*
0
#
PUSH TO EXIT
ACCESS 413NU CONTROL OR 423U
Any suggestions or comments to this instruction or product are welcome. Please contact us through our website or email [email protected]
SECURITY DOOR CONTROLS 801 Avenida Acaso, Camarillo, Ca. 93012 • (805) 494-0622 • Fax: (805) 494-8861 www.sdcsecurity.com • E-mail: [email protected]
INSTALLATION INSTRUCTIONS MODEL 413MN & 423M PUSH SWITCH FIXED 30 SECOND TIME DELAY This push to exit button is specifically intended for installation on Access Controlled Egress doors as described in the Boca code. A motion detector is the primary means of releasing a magnetic lock on the door. The push to exit button is intended, as a back up means of releasing the lock in the event there is a problem with the motion detector. When the button is pressed, the lock releases for 30-seconds. If pressed again during the 30-seconds lock release period, the unit will “Retrigger” starting a new 30-second lock release period.
TYPICAL WIRING POWER SUPPLY
+ 12/24VDC
-
BLK TIMER RED + POWER YEL/BLK NO WHT/BLK COM B ORG/BLK NC YEL NO WHT COM A ORG NC VIO LED BLU
413MN OR 423M MANUAL RELEASE DEVICE
423M
413MN
Electrical Specifications Input Voltage : 12/24VDC @90ma. LED Indicator : 12/24VDC @ 10/20ma Output Relay: DPDT Max Load : 30VDC @ 5 AMP (Resistive)
MD-31D FAIL SAFE REQUEST-TO-EXIT SENSOR DEVICE
NC C NO
NC C NO V- V+
POWER SUPPLY
ACCESS CONTROL
MOTION DETECTOR
EMLOCK
NC
NO
C
FAIL-SAFE LOCK POWER
+
2 5
3 6
7
8
9
*
0
#
ACCESS CONTROL
-
P:\INSTALLATION INST\Push and Key Switch\INST-413M-423M.vsd
1 4
REV D
02-13
Page 1
PUSH TO EXIT
MODEL 413MN/423M PUSH TO EXIT SWITCH
Any suggestions or comments to this instruction or product are welcome. Please contact us through our website or email [email protected]
801 Avenida Acaso, Camarillo, Ca. 93012 • (805) 494-0622 • www.sdcsecurity.com • E-mail: [email protected]
INSTALLATION INSTRUCTIONS 414 & 424 PUSH SWITCH 424U
414NU
Electrical Specifications Contact Type: DPDT (Form C) Contact Ratings: 30VDC @ 5 AMPS (Resistive) WHT (COM)
WHT (COM)
YEL (N/O)
YEL (N/O)
ORG (N/C)
ORG (N/C)
RED
RED
RED LAMP 28VDC MAX RED
P:\INSTALLATION INST\Push and Key Switch\INST-414-424.vsd
REV A
06-08
Page 1
Any suggestions or comments to this instruction or product are welcome. Please contact us through our website or email [email protected]
SECURITY DOOR CONTROLS 3580 Willow Lane, Westlake Village, CA 91361-4921 • (805) 494-0622 • Fax: (805) 494-8861 www.sdcsecurity.com • E-mail: [email protected]
INSTALLATION INSTRUCTIONS MODEL 415N & 425 ON/OFF PUSH SWITCH
425
415N
Electrical Specifications Contact Type: DPDT (Form C) Contact Ratings: 30VDC @ 5 AMPS (Resistive)
ORG (N/C)
WHT (COM)
RED LED
BLK GRN
YEL (N/O)
RED
ORG (N/C)
GRN WHT (COM) YEL (N/O)
P:\INSTALLATION INST\Push and Key Switch\INST- 415N-425.vsd
09-08
Page 1
Any suggestions or comments to this instruction or product are welcome. Please contact us through our website or email [email protected]
3580 Willow Lane, Westlake Village, CA 91361-4921 • (805) 494-0622 • Fax: (805) 494-8861 www.sdcsecurity.com • E-mail: [email protected]
INSTALLATION INSTRUCTIONS MODEL 460 REQUEST – TO – EXIT - SWITCH
Adjustable Timer
1 – 40 Seconds
12-24 VDC
NO 1 COM1
+ -
COM2 NC 2
*
With the jumpers as shown the red LED’s are on in stand-by and the green LED’s turn on when the relay is on.
Specifications
Selectable Bi-color Illumination Status Relay Off – Red, Green or None Relay On – Red, Green or None
Input Voltage: 12/24VDC Current: LED On: Idle-60mA, Active 120mA LED Off: Idle-10mA, Active-60mA
Red On – Standby Green On – Relay Action
Outputs: 1 N.O., 1 N.C., 2 Amp @ 30VDC
Red On – Relay Active Green On - Standby
Switch Operating Environment -40° F to +160°F (-40° C to +70°C)
Red Off Green Off
Dimensions 4.5" H x 2.75" W x 1.25" D (11.4 x 7 x 3.2 cm)
P:\INSTALLATION INST\Push and Key Switch\INST-460.vsd
*
0305
Page 1
Any suggestions or comments to this instruction or product are welcome. Please contact us through our website or email [email protected]
INSTALLATION INSTRUCTIONS 410/420 SERIES PUSH SWITCH
ORG (N/C)
Electrical Specifications Contact Type: SPDT (Form C) Contact Ratings: 30VDC @ 5 AMPS (Resistive)
WHT (COM) YEL (N/O)
RED LAMP 28VDC MAX RED
P:\INSTALLATION INST\Push and Key Switch\INST-410-420.vsd
REV A
03-11
Page 1
Any suggestions or comments to this instruction or product are welcome. Please contact us through our website or email [email protected]
3580 Willow Lane, Westlake Village, CA 91361-4921 • (805) 494-0622 • Fax: (805) 494-8861 www.sdcsecurity.com • E-mail: [email protected]
INSTALLATION INSTRUCTIONS MODEL 422 PUSH SWITCH
422GPE
422NGPE
ORG (N/C)
Electrical Specifications Contact Type: SPDT (Form C) Contact Ratings: 30VDC @ 5 AMPS (Resistive)
WHT (COM) YEL (N/O)
RED LAMP 28VDC MAX RED
P:\INSTALLATION INST\Push and Key Switch\INST- 422.vsd
0305
Page 1
Any suggestions or comments to this instruction or product are welcome. Please contact us through our website or email [email protected]
SECURITY DOOR CONTROLS
801 Avenida Acaso, Camarillo, CA 93012 • (805) 494-0622 www.sdcsecurity.com • E-mail: [email protected]
INSTALLATION INSTRUCTIONS MODEL 413NU & 423U PUSH SWITCH 1-60 SECOND ADJUSTABLE TIME DELAY When the button is pressed, the lock releases for 1-60 seconds. If pressed again during the lock release period, the unit will “Retrigger” starting a new release period.
Electrical Specifications Input Voltage : 12/24VDC @90ma. LED Indicator : 12/24VDC @ 10/20ma Output Relay: DPDT Max Load : 30VDC @ 5 AMP (Resistive)
1-60 SEC TIMER ADJ POT
423U
413NU
TYPICAL WIRING +
POWER SUPPLY
-
+
-
12/24VDC
BLK TIMER RED + POWER YEL/BLK NO WHT/BLK COM B ORG/BLK NC YEL NO WHT COM A ORG NC VIO LED BLU
12/24VDC
BLK TIMER RED + POWER YEL/BLK NO WHT/BLK COM B ORG/BLK NC YEL NO WHT COM A ORG NC VIO LED BLU
413NU OR 423U MANUAL RELEASE DEVICE
MD-31D FAIL SAFE REQUEST-TO-EXIT SENSOR DEVICE
NC C NO
POWER SUPPLY
413NU OR 423U MANUAL RELEASE DEVICE
MD-31D FAIL SAFE REQUEST-TO-EXIT SENSOR DEVICE
NC C NO
NC C NO V- V+
NC C NO V- V+
ACCESS CONTROL
POWER SUPPLY
ACCESS CONTROL
MD-31D
NC
POWER SUPPLY MD-31D
NC
EMLOCK
NO
NO
C
FAIL-SAFE LOCK
1 4
POWER
+
-
P:\INSTALLATION INST\Push and Key Switch\INST-413NU-423U.vsd
2 5
3 6
7
8
9
*
0
#
FAIL SECURE LOCK
PUSH TO EXIT
ACCESS 413NU CONTROL OR 423U
REV E
C
10-13
POWER
Page 1
+
-
ELECTRIC STRIKE
1
2
4
5
3 6
7
8
9
*
0
#
PUSH TO EXIT
ACCESS 413NU CONTROL OR 423U
Any suggestions or comments to this instruction or product are welcome. Please contact us through our website or email [email protected]
SECURITY DOOR CONTROLS 801 Avenida Acaso, Camarillo, Ca. 93012 • (805) 494-0622 • Fax: (805) 494-8861 www.sdcsecurity.com • E-mail: [email protected]
INSTALLATION INSTRUCTIONS MODEL 413MN & 423M PUSH SWITCH FIXED 30 SECOND TIME DELAY This push to exit button is specifically intended for installation on Access Controlled Egress doors as described in the Boca code. A motion detector is the primary means of releasing a magnetic lock on the door. The push to exit button is intended, as a back up means of releasing the lock in the event there is a problem with the motion detector. When the button is pressed, the lock releases for 30-seconds. If pressed again during the 30-seconds lock release period, the unit will “Retrigger” starting a new 30-second lock release period.
TYPICAL WIRING POWER SUPPLY
+ 12/24VDC
-
BLK TIMER RED + POWER YEL/BLK NO WHT/BLK COM B ORG/BLK NC YEL NO WHT COM A ORG NC VIO LED BLU
413MN OR 423M MANUAL RELEASE DEVICE
423M
413MN
Electrical Specifications Input Voltage : 12/24VDC @90ma. LED Indicator : 12/24VDC @ 10/20ma Output Relay: DPDT Max Load : 30VDC @ 5 AMP (Resistive)
MD-31D FAIL SAFE REQUEST-TO-EXIT SENSOR DEVICE
NC C NO
NC C NO V- V+
POWER SUPPLY
ACCESS CONTROL
MOTION DETECTOR
EMLOCK
NC
NO
C
FAIL-SAFE LOCK POWER
+
2 5
3 6
7
8
9
*
0
#
ACCESS CONTROL
-
P:\INSTALLATION INST\Push and Key Switch\INST-413M-423M.vsd
1 4
REV D
02-13
Page 1
PUSH TO EXIT
MODEL 413MN/423M PUSH TO EXIT SWITCH
Any suggestions or comments to this instruction or product are welcome. Please contact us through our website or email [email protected]
801 Avenida Acaso, Camarillo, Ca. 93012 • (805) 494-0622 • www.sdcsecurity.com • E-mail: [email protected]
INSTALLATION INSTRUCTIONS 414 & 424 PUSH SWITCH 424U
414NU
Electrical Specifications Contact Type: DPDT (Form C) Contact Ratings: 30VDC @ 5 AMPS (Resistive) WHT (COM)
WHT (COM)
YEL (N/O)
YEL (N/O)
ORG (N/C)
ORG (N/C)
RED
RED
RED LAMP 28VDC MAX RED
P:\INSTALLATION INST\Push and Key Switch\INST-414-424.vsd
REV A
06-08
Page 1
Any suggestions or comments to this instruction or product are welcome. Please contact us through our website or email [email protected]
SECURITY DOOR CONTROLS 3580 Willow Lane, Westlake Village, CA 91361-4921 • (805) 494-0622 • Fax: (805) 494-8861 www.sdcsecurity.com • E-mail: [email protected]
INSTALLATION INSTRUCTIONS MODEL 415N & 425 ON/OFF PUSH SWITCH
425
415N
Electrical Specifications Contact Type: DPDT (Form C) Contact Ratings: 30VDC @ 5 AMPS (Resistive)
ORG (N/C)
WHT (COM)
RED LED
BLK GRN
YEL (N/O)
RED
ORG (N/C)
GRN WHT (COM) YEL (N/O)
P:\INSTALLATION INST\Push and Key Switch\INST- 415N-425.vsd
09-08
Page 1
Any suggestions or comments to this instruction or product are welcome. Please contact us through our website or email [email protected]
3580 Willow Lane, Westlake Village, CA 91361-4921 • (805) 494-0622 • Fax: (805) 494-8861 www.sdcsecurity.com • E-mail: [email protected]
INSTALLATION INSTRUCTIONS MODEL 460 REQUEST – TO – EXIT - SWITCH
Adjustable Timer
1 – 40 Seconds
12-24 VDC
NO 1 COM1
+ -
COM2 NC 2
*
With the jumpers as shown the red LED’s are on in stand-by and the green LED’s turn on when the relay is on.
Specifications
Selectable Bi-color Illumination Status Relay Off – Red, Green or None Relay On – Red, Green or None
Input Voltage: 12/24VDC Current: LED On: Idle-60mA, Active 120mA LED Off: Idle-10mA, Active-60mA
Red On – Standby Green On – Relay Action
Outputs: 1 N.O., 1 N.C., 2 Amp @ 30VDC
Red On – Relay Active Green On - Standby
Switch Operating Environment -40° F to +160°F (-40° C to +70°C)
Red Off Green Off
Dimensions 4.5" H x 2.75" W x 1.25" D (11.4 x 7 x 3.2 cm)
P:\INSTALLATION INST\Push and Key Switch\INST-460.vsd
*
0305
Page 1
Any suggestions or comments to this instruction or product are welcome. Please contact us through our website or email [email protected]
