18-gauge interior top and bottom ABS plastic beige interior with acrylic mirror laminated to each side Two epoxy coated beige wire shelves with adjustable shelf supports Interior is lit with three fluorescent lights (120V60C-1PH) with separated on/off switch Each side of the curved glass is trimmed with a polyethylene extrusion formed to match the curvature of the glass Cabinet base is constructed with an 18-gauge stainless steel exterior and a galvanized 14-gauge bottom Exterior top is 18-gauge stainless steel and both exterior sides are finished in stainless steel High density environmentally friendly, Kyoto Protocol Compliant, Non ODP (Ozone Depletion Potential), Non GWP (Global Warming Potential) polyurethane foam throughout unit Adjustable feet to allow field leveling Unit is supplied with self-closing easily removable thermopane glass doors. The doors travel in a thermoplastic extruded top and bottom track with NSF food cleanouts in each bottom corner. Hold open mechanism is supplied for easy loading and
• • •
• • • •
•
a lock for night storage Main on/off switch One year parts and 90 day labor standard warranty Curved thermopane 1” thick glass is constructed of one .25” tempered outer pane, one .63” thick air spacer and one .18” tempered interior pane Environmentally friendly HFC-404A refrigerant 60 cycle - single phase electrical system Low fan velocity to reduce food dehydration Unit is equipped with a hot gas evaporator for condensation off the coil and controlled by a pressure control Front mounted louvers for proper ventilation
Options & Accessories • • • •
Full height laminate ends and base (customer side only) One-way mirrored doors Special decorative metal laminates Glass shelves
Specifications Exterior Body: Front of unit is provided with curved thermopane glass of 1.00” (2.54 cm) overall thickness with (2) tempered glass panes (outer pane) 0.25” (0.64 cm), (inner pane) 0.18 (0.48 cm). Each side of glass is trimmed with black polyethylene extrusion formed to match the curvature of the glass front. Base of cabinet is 18-gauge stainless steel over 14-gauge galvanized steel bottom structure. Exterior top of display case is constructed of 18-gauge stainless steel. Exterior sides are finished with stainless steel. Unit is completely insulated with 1.50” (3.8 cm) polyurethane environmentally friendly, Kyoto Protocol Compliant, Non ODP (Ozone Depletion Potential), Non GWP (Global Warming Potential) insulation. Adjustable feet allow for leveling.
(120v-60c-1ph) fluorescent lights, and two adjust with shelves, with separate on/off switch. Refrigeration: The condensing unit and blower coil evaporator system (HFC404A) 115v-60c-1ph, is housed in base of unit. Unit is designed to maintain temperatures of 36º - 40ºF with low velocity fans. Display is equipped with a hot gas evaporator for condensation and is regulated by a pressure control. Louvers are located at front and back of base for air circulation. On/off switch for entire system is located behind the louver access panel. Electrical: 115 volt, 60 Hertz, single phase. All units must be hard wired in the field.
Doors: Unit is provided with two self-closing, thermopane glass doors in a thermoplastic frame/track. Doors are easily removable for cleaning and are featured with a hold open mechanism for easy loading, and a lock for night storage. Interior Cabinet is constructed of 18-gauge stainless steel top and bottom. Interior sides are ABS material covered with mirrors. Two beige epoxy coated shelves are provided and have adjustable shelf supports. Interior is lighted with three
980 S. Isabella Rd. Mt. Pleasant, Michigan 48858
Phone: 800-733-8948 or 989-773-7981 Fax: 800-669-0619
Clear Door Opening Dimensions Model 537 -CR 14.00” X 23.50” (36cm X 60cm) Model 549-CR 19.75” X 23.50” (50cm X 60cm) Model 561-CR 26.65” X 23.50” (68cm X 60cm) Model 573-CR 31.75” X 23.50” (81cm X 60cm)
NOTE: Airflow Must Be Maintained To Insure Unit Performance And Maintain Warranty.
Radius Of Curved Glass (15.75" O.D.) Sliding
Sliding
REF'G
REF'G
20.75 53cm
Main Power Switch Located Behind Louver
8.25" 21cm
25.75 65cm
46.37" 118cm 16.03" 41cm
Light Switch Access Panel
1.50" 4cm
Air Out
Acess Hole For Elect. Connection
8.00" 20cm 7.87" 20cm
Air In
26.25 67cm 35.00" 89cm
Perspective View
Typical End Elevation All 500-CR Models
Typical Front Elevation All 500-CR Models
500-CR
Specifications Model
Type
V/Hz/Ph
Amps
h.p.
Cabinet Load BTU/HR
Sys. Cap BTU/HR
Ship Weight
537-CR
Refrigerated
115/60/1*
10.0
1/2
1730
2870
468lbs/213kg
549-CR
Refrigerated
115/60/1*
10.0
1/2
2250
3335
697lbs/317kg
561-CR
Refrigerated
115/60/1*
12.0
3/4
2770
4435
807lbs/367kg
573-CR
Refrigerated
115/60/1*
12.0
3/4
3290
5185
922lbs/419kg
*All 500-CR models must be hardwired. Delfield reserves the right to make changes to the design or specifications without prior notice. 980 S. Isabella Rd. Mt. Pleasant, Michigan 48858
Phone: 800-733-8948 or 989-773-7981 Fax: 800-669-0619 www.delfield.com