5618 Industrial Electric Actuators - Valworx
Industrial Electric Actuators
SERIES
AC and DC Voltages 25-200Nm/221-1770 inch lbs
5618
Features Quarter turn (90°) operation with mechanical travel stops Type 4X weatherproof aluminum alloy enclosure Highly visual valve position indicator Manual override ISO5211 multi-flange valve mounting Heavy duty motors with overload protection Thermostatically controlled anti-condensation heater Two auxiliary limit switches included on base units Self-locking all metal gear train, no additional brake required EPS- Electronic Positioner models available Approvals ETL Listed per UL429 and CSA C22.2
Description
Applications Industrial quality electric actuators typically used to automate quarter turn (90º) ball valves, butterfly valves and dampers. The 5618 series actuator is quick and easy to install with standard ISO5211 multi-flange mounting and a double square drive.
Operation Electric actuator uses power-to-open and power-to-close, stays in the last known position with loss of power. On receipt of a continuous voltage signal, the motor runs and via a rugged all metal gear system rotates 90º. The motor is automatically stopped by internal cams striking limit switches. On receipt of a reversing continuous signal, the motor turns in the opposite direction reversing the output drive position. Actuators with EPS positioner use an analog input signal to control the drive output position. Rugged self-locking all metal gear train eliminates the need for additional braking.
Construction
Excellent power to size, performance packed electric actuators take the valve automation industry to the next level. Features include rugged motor integral to actuator housing, all metal gears, manual override for emergency hand operation, visual valve position indicator and Type 4X weatherproof enclosure. Actuators are tested to rigorous UL and CSA standards and certified by Intertek ETL. On-Off units include two auxiliary dry contact limit switches used to confirm valve position. Anticondensation heater is standard and will help protect against condensation build-up inside the actuator.
Approvals
Enclosure
Anti-corrosive polyester painted aluminum alloy, Type 4X/ IP65
Output Drive
ISO5211 aluminum alloy, female double square
Valve Position Indicator
Yellow with transparent clear polycarbonate cover
Gears
Heat treated steel and aluminum bronze, self locking
Fasteners
Stainless Steel
- 2006/42/EC Machinery Directive
Electrical Connections
Terminal strip, 1/2 inch NPT conduit with cable connector(s)
- 2006/95/EC Low Voltage Directive
Manual Override
Standard hex wrench (included) with protective cover
Visual Position Indicator
Clear polycarbonate cover, red/yellow open-closed
EPS Positioner Models
Fully potted control module, selectable 4-20mA or 0-10VDC input
Doc: 5618.0714
Cornelius, N.C. • USA
• Intertek ETL Listed 4010147 to: - UL429 and CSA C22.2 No. 139 - UL50E Type 4X weatherproof enclosure • CE mark, conforming to:
- 2004/108/EC EMC Compatibility (FCC) - RoHS2 and WEEE Compliance - ISO5211 mounting - IP65 weatherproof enclosure www.valworx.com 1
SERIES
5618 Construction Features Auxiliary Limit Switches(2) for confirming valve position standard in on-off units
Anti-Condensation Heater
Terminal Box, wire directly to terminal strip via 1/2” NPT conduit connection or use included cable connector
Heavy duty integral motor design significantly reduces physical size of actuator
Manual Override with protective cover Rugged polyester powder coated aluminum Type 4X weatherproof enclosure, ETL listed per UL50E standards
Self-locking all metal gear drive, no additional brake required
ISO5211 International standard multi-flange valve mounting pad
Visual Valve Position Indicator
Typical Applications
Doc: 5618.0714
Cornelius, N.C. • USA
www.valworx.com 2
SERIES
5618 Selection Guide Stock Number
Torque Nm
in lbs
Voltage AC (50/60Hz) or DC
Current F.L. Amps
Cycle Time /90º (seconds)
Duty Cycle
Valve Mounting ISO5211
Output Drive (mm)
Enclosure Type
Data Sheet Page No.
ELECTRIC ACTUATORS 561825
25
221
120 VAC
0.38
10
60
F03, F05, F07
14
4X / IP65
4
561850
50
442
120 VAC
0.38
18
60
F03, F05, F07
14
4X / IP65
5
561851
50
442
12 or 24 VDC
2.7 / 1.5
10
60
F03, F05, F07
14
4X / IP65
6
561870
200
1770
120 VAC
0.92
27
60
F07, F10
22
4X / IP65
7
561871
200
1770
12 or 24 VDC
5.6 / 2.7
24
60
F07, F10
22
4X / IP65
8
ELECTRIC ACTUATORS with EPS POSITIONER, Field Selectable 4-20mA or 0-10V INPUT 561856
50
442
120 VAC
0.42
18
60
F03, F05, F07
14
4X / IP65
9
561857
50
442
12 or 24 VDC
3.0 / 1.5
10
60
F03, F05, F07
14
4X / IP65
10
561876
200
1770
120 VAC
1.07
27
60
F07, F10
22
4X / IP65
11
561877
200
1770
12 or 24 VDC
5.7 / 2.8
24
60
F07, F10
22
4X / IP65
12
Electric Actuators Valworx quarter turn electric actuators use power-to-open and power-to-close, stays in the last known position with loss of power. The actuator will rotate the output drive 90° to open or close ball valves, butterfly valves or other valves requiring a quarter turn function. Limit switches automatically stop the motor drive in either the open or closed position as required.
The EPS system is self-calibrating which virtually eliminates “hunting” and provides an output monitoring signal as standard. The following functions are standard on the EPS module:
Adjustable forward or reversing action. Ex: standard 4mA close/20mA open or selectable 4mA open/20mA close
EPS - Electronic Positioning System
Sensitivity - adjustable from 0.5% to 5.0%
Valve positioning and how it works?
Zero position adjustment 0% to 50%
Valworx electric actuators with EPS- Electronic Positioning System provides an accurate valve positioning function whereby the movement of the actuator is controlled by either a selectable 4-20mA or a 0-10VDC input control signal. Any change in the control input signal results in a corresponding and proportional change in the position of the actuator.
Span position adjustment 100% to 60%
Selectable fail mode: fail closed, fail open or stop in place. This is not for loss of power, but for loss of input command signal.
Electric manual switches
Fault LED lights indicate valve jam or signal loss
Electronic brake function
Power on LED
This is achieved with a unique built in electronic positioning module. The module is fully potted to help protect the electronics from vibration and moisture resistance. An internal microprocessor on the EPS circuit board continuously monitors the analog input and output signals and compares them to the physical position via a precision potentiometer feedback system, moving the actuator output as required to balance the signals.
Doc: 5618.0714
Cornelius, N.C. • USA
control
with
onboard
selector
www.valworx.com 3
561825 Electric Actuator 120VAC, 25Nm/221 inch lbs Specifications
SERIES
5618
Stock Number
561825 Type Operation
On-Off
Max Torque
221 in lbs / 25 Nm
Voltage
120 VAC 50/60Hz
Current - Full Load Amps
0.38 A
Working Time (0-90°/no load)
10 sec
Duty Cycle
60%
Enclosure
Aluminum alloy
Enclosure Protection
Type 4X (IP65) weatherproof
Electrical Connections
1/2” NPT conduit/cable connector
Working Angle Std°
90°
Temperature Range
ETL Listed to UL429 and CSA C22.2 No.139
-4 to +140 °F (-20 to +60 °C)
Motor Protection
Thermal overload
Motor Limit Switches
2 x SPDT
Auxiliary Limit Switches (2)
3A@125/250VAC, 30VDC resistive
Anti-condensation Heater
4 watts
Manual Override
Hex wrench
Valve Mounting per ISO5211
F03, F05, F07
Output Drive DIN3337
14mm (female double square)
Weight
6 lbs (2.72 kg)
14 SQUARE 4) M6 X 16
4) M8 X 16
4) M5 X 16 B
E C
A
Stock Number 561825
Doc: 5618.0714
70
F03\05\07 ISO 5211 MOUNTING PAD
F
Ø
D
Ø 36 Ø 50
K
M
A
B
C
D
E
F
K
M
Weight
inch
6.34
5.39
4.65
3.27
0.73
2.68
2.83
0.91
6 lbs
mm
161
137
118
83
18.5
68
72
23
2.72 kg
Cornelius, N.C. • USA
www.valworx.com 4
561850 Electric Actuator 120VAC, 50Nm/442 inch lbs Specifications
SERIES
5618
Stock Number
561850 Type Operation
On-Off
Max Torque
442 in lbs / 50 Nm
Voltage
120 VAC 50/60Hz
Current - Full Load Amps
0.38 A
Working Time (0-90°/no load)
18 sec
Duty Cycle
60%
Enclosure
Aluminum alloy
Enclosure Protection
Type 4X (IP65) weatherproof
Electrical Connections
1/2” NPT conduit/cable connector
Working Angle Std°
90°
Temperature Range
ETL Listed to UL429 and CSA C22.2 No.139
-4 to +140 °F (-20 to +60 °C)
Motor Protection
Thermal overload
Motor Limit Switches
2 x SPDT
Auxiliary Limit Switches (2)
3A@125/250VAC, 30VDC resistive
Anti-condensation Heater
4 watts
Manual Override
Hex wrench
Valve Mounting per ISO5211
F03, F05, F07
Output Drive DIN3337
14mm (female double square)
Weight
6 lbs (2.72 kg)
14 SQUARE 4) M6 X 16
4) M8 X 16
4) M5 X 16 B
E C
A
Stock Number 561850
Doc: 5618.0714
70
F03\05\07 ISO 5211 MOUNTING PAD
F
Ø
D
Ø 36 Ø 50
K
M
A
B
C
D
E
F
K
M
Weight
inch
6.34
5.39
4.65
3.27
0.73
2.68
2.83
0.91
6 lbs
mm
161
137
118
83
18.5
68
72
23
2.72 kg
Cornelius, N.C. • USA
www.valworx.com 5
561851 Electric Actuator 12/24VDC, 50Nm/442 inch lbs Specifications
SERIES
5618
Stock Number
561851 Type Operation
On-Off
Max Torque
442 in lbs / 50 Nm
Voltage
12 or 24 VDC
Current - Full Load Amps
2.7/1.5 A
Working Time (0-90°/no load)
10 sec
Duty Cycle
60%
Enclosure
Aluminum alloy
Enclosure Protection
Type 4X (IP65) weatherproof
Electrical Connections
1/2” NPT conduit/cable connector
Working Angle Std°
90°
Temperature Range
ETL Listed to UL429 and CSA C22.2 No.139
-4 to +140 °F (-20 to +60 °C)
Motor Protection
Current sensor
Motor Limit Switches
2 x SPDT
Auxiliary Limit Switches (2)
3A@125/250VAC, 30VDC resistive
Anti-condensation Heater
4 watts
Manual Override
Hex wrench
Valve Mounting per ISO5211
F03, F05, F07
Output Drive DIN3337
14mm (female double square)
Weight
6.5 lbs (3 kg)
14 SQUARE 4) M6 X 16
4) M8 X 16
4) M5 X 16
B
D
F C
A Stock Number 561851
Doc: 5618.0714
F03\05\07 ISO 5211 MOUNTING PAD
Ø
E
50 Ø 70
Ø 36
K
M
A
B
C
D
E
F
K
M
Weight
inch
8.54
5.39
4.65
3.27
0.73
2.68
2.83
0.91
6.5 lbs
mm
217
137
118
83
18.5
68
72
23
3 kg
Cornelius, N.C. • USA
www.valworx.com 6
561870 Electric Actuator 120VAC, 200Nm/1770 inch lbs Specifications
SERIES
5618
Stock Number
561870 Type Operation
On-Off
Max Torque
1770 in lbs / 200 Nm
Voltage
120 VAC 50/60Hz
Current - Full Load Amps
0.92 A
Working Time (0-90°/no load)
27 sec
Duty Cycle
60%
Enclosure
Aluminum alloy
Enclosure Protection
Type 4X (IP65) weatherproof
Electrical Connections
1/2” NPT conduit/cable connector
Working Angle Std°
90°
Temperature Range
ETL Listed to UL429 and CSA C22.2 No.139
-4 to +140 °F (-20 to +60 °C)
Motor Protection
Thermal overload
Motor Limit Switches
2 x SPDT
Auxiliary Limit Switches (2)
3A@125/250VAC, 30VDC resistive
Anti-condensation Heater
4 watts
Manual Override
Hex wrench
Valve Mounting per ISO5211
F07, F10
Output Drive DIN3337
22mm (female double square)
Weight
20.7 lbs (9.4 kg)
22 SQUARE 4) M8 X 28
4) M10 X 28
E D
F07\10 ISO 5211 MOUNTING PAD
F C
A Stock Number 561870
Doc: 5618.0714
Ø
K
Ø 7 10 0 2
B
M
A
B
C
D
E
F
K
M
Weight
inch
10.08
7.76
6.30
4.72
0.93
3.82
4.09
0.91
20.7 lbs
mm
256
197
160
120
23.6
97
104
23
9.4 kg
Cornelius, N.C. • USA
www.valworx.com 7
561871 Electric Actuator 12/24VDC, 200Nm/1770 inch lbs Specifications
SERIES
5618
Stock Number
561871 Type Operation
On-Off
Max Torque
1770 in lbs / 200 Nm
Voltage
12 or 24 VDC
Current - Full Load Amps
5.6/2.7 A
Working Time (0-90°/no load)
24 sec
Duty Cycle
60%
Enclosure
Aluminum alloy
Enclosure Protection
Type 4X (IP65) weatherproof
Electrical Connections
1/2” NPT conduit/cable connector
Working Angle Std°
90°
Temperature Range
ETL Listed to UL429 and CSA C22.2 No.139
-4 to +140 °F (-20 to +60 °C)
Motor Protection
Current sensor
Motor Limit Switches
2 x SPDT
Auxiliary Limit Switches (2)
3A@125/250VAC, 30VDC resistive
Anti-condensation Heater
4 watts
Manual Override
Hex wrench
Valve Mounting per ISO5211
F07, F10
Output Drive DIN3337
22mm (female double square)
Weight
22 lbs (10 kg)
22 SQUARE 4) M8 X 28
4) M10 X 28
E D
F07\10 ISO 5211 MOUNTING PAD
F C
A
Stock Number 561871
Doc: 5618.0714
Ø
K
Ø 7 10 0 2
B
M
A
B
C
D
E
F
K
M
Weight
inch
11.85
7.76
6.30
4.72
0.93
3.82
4.09
0.91
22 lbs
mm
301
197
160
120
23.6
97
104
23
10 kg
Cornelius, N.C. • USA
www.valworx.com 8
561856 Electric Actuator with EPS Positioner 120VAC, 50Nm/442 inch lbs Specifications
SERIES
5618
Stock Number
561856 Type Operation
EPS - Electronic Positioning System
Max Torque
442 in lbs / 50 Nm
Voltage
120 VAC 50/60Hz
Input Command Signal
4-20mA or 0-10VDC (selectable)
Output Monitoring Signal
Same type as input signal
Current - Full Load Amps
0.42 A
Working Time (0-90°/no load)
18 sec
Duty Cycle
60%
Enclosure
Aluminum alloy
Enclosure Protection
ETL Listed to UL429 and CSA C22.2 No.139
Type 4X (IP65) weatherproof
Electrical Connections
1/2” NPT conduit/cable connector
Working Angle Std°
90°
Temperature Range
-4 to +140 °F (-20 to +60 °C)
Motor Protection
Thermal overload
Motor Limit Switches
2 x SPDT
Anti-condensation Heater
4 watts
Manual Override
Hex wrench
Valve Mounting per ISO5211
F03, F05, F07
Output Drive DIN3337
14mm (female double square)
Weight
6.5 lbs (3 kg) 14 SQUARE 4) M6 X 16
4) M8 X 16
4) M5 X 16
B
C
Stock Number 561856
Doc: 5618.0714
70
F A
Ø
D
F03\05\07 ISO 5211 MOUNTING PAD
50
E
Ø
Ø
36
K
M
A
B
C
D
E
F
K
M
Weight
inch
8.54
5.39
4.65
3.27
0.73
2.68
2.83
0.91
6.5 lbs
mm
217
137
118
83
18.5
68
72
23
3 kg
Cornelius, N.C. • USA
www.valworx.com 9
561857 Electric Actuator with EPS Positioner 12/24VDC, 50Nm/442 inch lbs Specifications
SERIES
5618
Stock Number
561857 Type Operation
EPS - Electronic Positioning System
Max Torque
442 in lbs / 50 Nm
Voltage
12 or 24 VDC
Input Command Signal
4-20mA or 0-10VDC (selectable)
Output Monitoring Signal
Same type as input signal
Current - Full Load Amps
3.0/1.5 A
Working Time (0-90°/no load)
10 sec
Duty Cycle
60%
Enclosure
Aluminum alloy
Enclosure Protection
ETL Listed to UL429 and CSA C22.2 No.139
Type 4X (IP65) weatherproof
Electrical Connections
1/2” NPT conduit/cable connector
Working Angle Std°
90°
Temperature Range
-4 to +140 °F (-20 to +60 °C)
Motor Protection
Current sensor
Motor Limit Switches
2 x SPDT
Anti-condensation Heater
4 watts
Manual Override
Hex wrench
Valve Mounting per ISO5211
F03, F05, F07
Output Drive DIN3337
14mm (female double square)
Weight
6.5 lbs (3 kg) 14 SQUARE 4) M6 X 16
4) M8 X 16
4) M5 X 16
B
C
Stock Number 561857
Doc: 5618.0714
70
F A
Ø
D
F03\05\07 ISO 5211 MOUNTING PAD
50
E
Ø
Ø
36
K
M
A
B
C
D
E
F
K
M
Weight
inch
8.54
5.39
4.65
3.27
0.73
2.68
2.83
0.91
6.5 lbs
mm
217
137
118
83
18.5
68
72
23
3 kg
Cornelius, N.C. • USA
www.valworx.com 10
561876 Electric Actuator with EPS Positioner 120VAC, 200Nm/1770 inch lbs Specifications
SERIES
5618
Stock Number
561876 Type Operation
EPS - Electronic Positioning System
Max Torque
1770 in lbs / 200 Nm
Voltage
120 VAC 50/60Hz
Input Command Signal
4-20mA or 0-10VDC (selectable)
Output Monitoring Signal
Same type as input signal
Current - Full Load Amps
1.07 A
Working Time (0-90°/no load)
27 sec
Duty Cycle
60%
Enclosure
Aluminum alloy
Enclosure Protection
ETL Listed to UL429 and CSA C22.2 No.139
Type 4X (IP65) weatherproof
Electrical Connections
1/2” NPT conduit/cable connector
Working Angle Std°
90°
Temperature Range
-4 to +140 °F (-20 to +60 °C)
Motor Protection
Thermal overload
Motor Limit Switches
2 x SPDT
Anti-condensation Heater
4 watts
Manual Override
Hex wrench
Valve Mounting per ISO5211
F07, F10
Output Drive DIN3337
22mm (female double square)
Weight
22 lbs (10 kg) 22 SQUARE 4) M8 X 28
4) M10 X 28
E D
F07\10 ISO 5211 MOUNTING PAD
F C
A
Stock Number 561876
Doc: 5618.0714
Ø
K
Ø 7 10 0 2
B
M
A
B
C
D
E
F
K
M
Weight
inch
11.85
7.76
6.30
4.72
0.93
3.82
4.09
0.91
22 lbs
mm
301
197
160
120
23.6
97
104
23
10 kg
Cornelius, N.C. • USA
www.valworx.com 11
561877 Electric Actuator with EPS Positioner 12/24VDC, 200Nm/1770 inch lbs Specifications
SERIES
5618
Stock Number
561877 Type Operation
EPS - Electronic Positioning System
Max Torque
1770 in lbs / 200 Nm
Voltage
12 or 24 VDC
Input Command Signal
4-20mA or 0-10VDC (selectable)
Output Monitoring Signal
Same type as input signal
Current - Full Load Amps
5.6/2.8 A
Working Time (0-90°/no load)
24 sec
Duty Cycle
60%
Enclosure
Aluminum alloy
Enclosure Protection
ETL Listed to UL429 and CSA C22.2 No.139
Type 4X (IP65) weatherproof
Electrical Connections
1/2” NPT conduit/cable connector
Working Angle Std°
90°
Temperature Range
-4 to +140 °F (-20 to +60 °C)
Motor Protection
Current sensor
Motor Limit Switches
2 x SPDT
Anti-condensation Heater
4 watts
Manual Override
Hex wrench
Valve Mounting per ISO5211
F07, F10
Output Drive DIN3337
22mm (female double square)
Weight
22 lbs (10 kg) 22 SQUARE 4) M8 X 28
4) M10 X 28
E D
F07\10 ISO 5211 MOUNTING PAD
F C
A
Stock Number 561877
Doc: 5618.0714
Ø
K
Ø 7 10 0 2
B
M
A
B
C
D
E
F
K
M
Weight
inch
11.85
7.76
6.30
4.72
0.93
3.82
4.09
0.91
22 lbs
mm
301
197
160
120
23.6
97
104
23
10 kg
Cornelius, N.C. • USA
www.valworx.com 12
SERIES
AC and DC Voltages 25-200Nm/221-1770 inch lbs
5618
Features Quarter turn (90°) operation with mechanical travel stops Type 4X weatherproof aluminum alloy enclosure Highly visual valve position indicator Manual override ISO5211 multi-flange valve mounting Heavy duty motors with overload protection Thermostatically controlled anti-condensation heater Two auxiliary limit switches included on base units Self-locking all metal gear train, no additional brake required EPS- Electronic Positioner models available Approvals ETL Listed per UL429 and CSA C22.2
Description
Applications Industrial quality electric actuators typically used to automate quarter turn (90º) ball valves, butterfly valves and dampers. The 5618 series actuator is quick and easy to install with standard ISO5211 multi-flange mounting and a double square drive.
Operation Electric actuator uses power-to-open and power-to-close, stays in the last known position with loss of power. On receipt of a continuous voltage signal, the motor runs and via a rugged all metal gear system rotates 90º. The motor is automatically stopped by internal cams striking limit switches. On receipt of a reversing continuous signal, the motor turns in the opposite direction reversing the output drive position. Actuators with EPS positioner use an analog input signal to control the drive output position. Rugged self-locking all metal gear train eliminates the need for additional braking.
Construction
Excellent power to size, performance packed electric actuators take the valve automation industry to the next level. Features include rugged motor integral to actuator housing, all metal gears, manual override for emergency hand operation, visual valve position indicator and Type 4X weatherproof enclosure. Actuators are tested to rigorous UL and CSA standards and certified by Intertek ETL. On-Off units include two auxiliary dry contact limit switches used to confirm valve position. Anticondensation heater is standard and will help protect against condensation build-up inside the actuator.
Approvals
Enclosure
Anti-corrosive polyester painted aluminum alloy, Type 4X/ IP65
Output Drive
ISO5211 aluminum alloy, female double square
Valve Position Indicator
Yellow with transparent clear polycarbonate cover
Gears
Heat treated steel and aluminum bronze, self locking
Fasteners
Stainless Steel
- 2006/42/EC Machinery Directive
Electrical Connections
Terminal strip, 1/2 inch NPT conduit with cable connector(s)
- 2006/95/EC Low Voltage Directive
Manual Override
Standard hex wrench (included) with protective cover
Visual Position Indicator
Clear polycarbonate cover, red/yellow open-closed
EPS Positioner Models
Fully potted control module, selectable 4-20mA or 0-10VDC input
Doc: 5618.0714
Cornelius, N.C. • USA
• Intertek ETL Listed 4010147 to: - UL429 and CSA C22.2 No. 139 - UL50E Type 4X weatherproof enclosure • CE mark, conforming to:
- 2004/108/EC EMC Compatibility (FCC) - RoHS2 and WEEE Compliance - ISO5211 mounting - IP65 weatherproof enclosure www.valworx.com 1
SERIES
5618 Construction Features Auxiliary Limit Switches(2) for confirming valve position standard in on-off units
Anti-Condensation Heater
Terminal Box, wire directly to terminal strip via 1/2” NPT conduit connection or use included cable connector
Heavy duty integral motor design significantly reduces physical size of actuator
Manual Override with protective cover Rugged polyester powder coated aluminum Type 4X weatherproof enclosure, ETL listed per UL50E standards
Self-locking all metal gear drive, no additional brake required
ISO5211 International standard multi-flange valve mounting pad
Visual Valve Position Indicator
Typical Applications
Doc: 5618.0714
Cornelius, N.C. • USA
www.valworx.com 2
SERIES
5618 Selection Guide Stock Number
Torque Nm
in lbs
Voltage AC (50/60Hz) or DC
Current F.L. Amps
Cycle Time /90º (seconds)
Duty Cycle
Valve Mounting ISO5211
Output Drive (mm)
Enclosure Type
Data Sheet Page No.
ELECTRIC ACTUATORS 561825
25
221
120 VAC
0.38
10
60
F03, F05, F07
14
4X / IP65
4
561850
50
442
120 VAC
0.38
18
60
F03, F05, F07
14
4X / IP65
5
561851
50
442
12 or 24 VDC
2.7 / 1.5
10
60
F03, F05, F07
14
4X / IP65
6
561870
200
1770
120 VAC
0.92
27
60
F07, F10
22
4X / IP65
7
561871
200
1770
12 or 24 VDC
5.6 / 2.7
24
60
F07, F10
22
4X / IP65
8
ELECTRIC ACTUATORS with EPS POSITIONER, Field Selectable 4-20mA or 0-10V INPUT 561856
50
442
120 VAC
0.42
18
60
F03, F05, F07
14
4X / IP65
9
561857
50
442
12 or 24 VDC
3.0 / 1.5
10
60
F03, F05, F07
14
4X / IP65
10
561876
200
1770
120 VAC
1.07
27
60
F07, F10
22
4X / IP65
11
561877
200
1770
12 or 24 VDC
5.7 / 2.8
24
60
F07, F10
22
4X / IP65
12
Electric Actuators Valworx quarter turn electric actuators use power-to-open and power-to-close, stays in the last known position with loss of power. The actuator will rotate the output drive 90° to open or close ball valves, butterfly valves or other valves requiring a quarter turn function. Limit switches automatically stop the motor drive in either the open or closed position as required.
The EPS system is self-calibrating which virtually eliminates “hunting” and provides an output monitoring signal as standard. The following functions are standard on the EPS module:
Adjustable forward or reversing action. Ex: standard 4mA close/20mA open or selectable 4mA open/20mA close
EPS - Electronic Positioning System
Sensitivity - adjustable from 0.5% to 5.0%
Valve positioning and how it works?
Zero position adjustment 0% to 50%
Valworx electric actuators with EPS- Electronic Positioning System provides an accurate valve positioning function whereby the movement of the actuator is controlled by either a selectable 4-20mA or a 0-10VDC input control signal. Any change in the control input signal results in a corresponding and proportional change in the position of the actuator.
Span position adjustment 100% to 60%
Selectable fail mode: fail closed, fail open or stop in place. This is not for loss of power, but for loss of input command signal.
Electric manual switches
Fault LED lights indicate valve jam or signal loss
Electronic brake function
Power on LED
This is achieved with a unique built in electronic positioning module. The module is fully potted to help protect the electronics from vibration and moisture resistance. An internal microprocessor on the EPS circuit board continuously monitors the analog input and output signals and compares them to the physical position via a precision potentiometer feedback system, moving the actuator output as required to balance the signals.
Doc: 5618.0714
Cornelius, N.C. • USA
control
with
onboard
selector
www.valworx.com 3
561825 Electric Actuator 120VAC, 25Nm/221 inch lbs Specifications
SERIES
5618
Stock Number
561825 Type Operation
On-Off
Max Torque
221 in lbs / 25 Nm
Voltage
120 VAC 50/60Hz
Current - Full Load Amps
0.38 A
Working Time (0-90°/no load)
10 sec
Duty Cycle
60%
Enclosure
Aluminum alloy
Enclosure Protection
Type 4X (IP65) weatherproof
Electrical Connections
1/2” NPT conduit/cable connector
Working Angle Std°
90°
Temperature Range
ETL Listed to UL429 and CSA C22.2 No.139
-4 to +140 °F (-20 to +60 °C)
Motor Protection
Thermal overload
Motor Limit Switches
2 x SPDT
Auxiliary Limit Switches (2)
3A@125/250VAC, 30VDC resistive
Anti-condensation Heater
4 watts
Manual Override
Hex wrench
Valve Mounting per ISO5211
F03, F05, F07
Output Drive DIN3337
14mm (female double square)
Weight
6 lbs (2.72 kg)
14 SQUARE 4) M6 X 16
4) M8 X 16
4) M5 X 16 B
E C
A
Stock Number 561825
Doc: 5618.0714
70
F03\05\07 ISO 5211 MOUNTING PAD
F
Ø
D
Ø 36 Ø 50
K
M
A
B
C
D
E
F
K
M
Weight
inch
6.34
5.39
4.65
3.27
0.73
2.68
2.83
0.91
6 lbs
mm
161
137
118
83
18.5
68
72
23
2.72 kg
Cornelius, N.C. • USA
www.valworx.com 4
561850 Electric Actuator 120VAC, 50Nm/442 inch lbs Specifications
SERIES
5618
Stock Number
561850 Type Operation
On-Off
Max Torque
442 in lbs / 50 Nm
Voltage
120 VAC 50/60Hz
Current - Full Load Amps
0.38 A
Working Time (0-90°/no load)
18 sec
Duty Cycle
60%
Enclosure
Aluminum alloy
Enclosure Protection
Type 4X (IP65) weatherproof
Electrical Connections
1/2” NPT conduit/cable connector
Working Angle Std°
90°
Temperature Range
ETL Listed to UL429 and CSA C22.2 No.139
-4 to +140 °F (-20 to +60 °C)
Motor Protection
Thermal overload
Motor Limit Switches
2 x SPDT
Auxiliary Limit Switches (2)
3A@125/250VAC, 30VDC resistive
Anti-condensation Heater
4 watts
Manual Override
Hex wrench
Valve Mounting per ISO5211
F03, F05, F07
Output Drive DIN3337
14mm (female double square)
Weight
6 lbs (2.72 kg)
14 SQUARE 4) M6 X 16
4) M8 X 16
4) M5 X 16 B
E C
A
Stock Number 561850
Doc: 5618.0714
70
F03\05\07 ISO 5211 MOUNTING PAD
F
Ø
D
Ø 36 Ø 50
K
M
A
B
C
D
E
F
K
M
Weight
inch
6.34
5.39
4.65
3.27
0.73
2.68
2.83
0.91
6 lbs
mm
161
137
118
83
18.5
68
72
23
2.72 kg
Cornelius, N.C. • USA
www.valworx.com 5
561851 Electric Actuator 12/24VDC, 50Nm/442 inch lbs Specifications
SERIES
5618
Stock Number
561851 Type Operation
On-Off
Max Torque
442 in lbs / 50 Nm
Voltage
12 or 24 VDC
Current - Full Load Amps
2.7/1.5 A
Working Time (0-90°/no load)
10 sec
Duty Cycle
60%
Enclosure
Aluminum alloy
Enclosure Protection
Type 4X (IP65) weatherproof
Electrical Connections
1/2” NPT conduit/cable connector
Working Angle Std°
90°
Temperature Range
ETL Listed to UL429 and CSA C22.2 No.139
-4 to +140 °F (-20 to +60 °C)
Motor Protection
Current sensor
Motor Limit Switches
2 x SPDT
Auxiliary Limit Switches (2)
3A@125/250VAC, 30VDC resistive
Anti-condensation Heater
4 watts
Manual Override
Hex wrench
Valve Mounting per ISO5211
F03, F05, F07
Output Drive DIN3337
14mm (female double square)
Weight
6.5 lbs (3 kg)
14 SQUARE 4) M6 X 16
4) M8 X 16
4) M5 X 16
B
D
F C
A Stock Number 561851
Doc: 5618.0714
F03\05\07 ISO 5211 MOUNTING PAD
Ø
E
50 Ø 70
Ø 36
K
M
A
B
C
D
E
F
K
M
Weight
inch
8.54
5.39
4.65
3.27
0.73
2.68
2.83
0.91
6.5 lbs
mm
217
137
118
83
18.5
68
72
23
3 kg
Cornelius, N.C. • USA
www.valworx.com 6
561870 Electric Actuator 120VAC, 200Nm/1770 inch lbs Specifications
SERIES
5618
Stock Number
561870 Type Operation
On-Off
Max Torque
1770 in lbs / 200 Nm
Voltage
120 VAC 50/60Hz
Current - Full Load Amps
0.92 A
Working Time (0-90°/no load)
27 sec
Duty Cycle
60%
Enclosure
Aluminum alloy
Enclosure Protection
Type 4X (IP65) weatherproof
Electrical Connections
1/2” NPT conduit/cable connector
Working Angle Std°
90°
Temperature Range
ETL Listed to UL429 and CSA C22.2 No.139
-4 to +140 °F (-20 to +60 °C)
Motor Protection
Thermal overload
Motor Limit Switches
2 x SPDT
Auxiliary Limit Switches (2)
3A@125/250VAC, 30VDC resistive
Anti-condensation Heater
4 watts
Manual Override
Hex wrench
Valve Mounting per ISO5211
F07, F10
Output Drive DIN3337
22mm (female double square)
Weight
20.7 lbs (9.4 kg)
22 SQUARE 4) M8 X 28
4) M10 X 28
E D
F07\10 ISO 5211 MOUNTING PAD
F C
A Stock Number 561870
Doc: 5618.0714
Ø
K
Ø 7 10 0 2
B
M
A
B
C
D
E
F
K
M
Weight
inch
10.08
7.76
6.30
4.72
0.93
3.82
4.09
0.91
20.7 lbs
mm
256
197
160
120
23.6
97
104
23
9.4 kg
Cornelius, N.C. • USA
www.valworx.com 7
561871 Electric Actuator 12/24VDC, 200Nm/1770 inch lbs Specifications
SERIES
5618
Stock Number
561871 Type Operation
On-Off
Max Torque
1770 in lbs / 200 Nm
Voltage
12 or 24 VDC
Current - Full Load Amps
5.6/2.7 A
Working Time (0-90°/no load)
24 sec
Duty Cycle
60%
Enclosure
Aluminum alloy
Enclosure Protection
Type 4X (IP65) weatherproof
Electrical Connections
1/2” NPT conduit/cable connector
Working Angle Std°
90°
Temperature Range
ETL Listed to UL429 and CSA C22.2 No.139
-4 to +140 °F (-20 to +60 °C)
Motor Protection
Current sensor
Motor Limit Switches
2 x SPDT
Auxiliary Limit Switches (2)
3A@125/250VAC, 30VDC resistive
Anti-condensation Heater
4 watts
Manual Override
Hex wrench
Valve Mounting per ISO5211
F07, F10
Output Drive DIN3337
22mm (female double square)
Weight
22 lbs (10 kg)
22 SQUARE 4) M8 X 28
4) M10 X 28
E D
F07\10 ISO 5211 MOUNTING PAD
F C
A
Stock Number 561871
Doc: 5618.0714
Ø
K
Ø 7 10 0 2
B
M
A
B
C
D
E
F
K
M
Weight
inch
11.85
7.76
6.30
4.72
0.93
3.82
4.09
0.91
22 lbs
mm
301
197
160
120
23.6
97
104
23
10 kg
Cornelius, N.C. • USA
www.valworx.com 8
561856 Electric Actuator with EPS Positioner 120VAC, 50Nm/442 inch lbs Specifications
SERIES
5618
Stock Number
561856 Type Operation
EPS - Electronic Positioning System
Max Torque
442 in lbs / 50 Nm
Voltage
120 VAC 50/60Hz
Input Command Signal
4-20mA or 0-10VDC (selectable)
Output Monitoring Signal
Same type as input signal
Current - Full Load Amps
0.42 A
Working Time (0-90°/no load)
18 sec
Duty Cycle
60%
Enclosure
Aluminum alloy
Enclosure Protection
ETL Listed to UL429 and CSA C22.2 No.139
Type 4X (IP65) weatherproof
Electrical Connections
1/2” NPT conduit/cable connector
Working Angle Std°
90°
Temperature Range
-4 to +140 °F (-20 to +60 °C)
Motor Protection
Thermal overload
Motor Limit Switches
2 x SPDT
Anti-condensation Heater
4 watts
Manual Override
Hex wrench
Valve Mounting per ISO5211
F03, F05, F07
Output Drive DIN3337
14mm (female double square)
Weight
6.5 lbs (3 kg) 14 SQUARE 4) M6 X 16
4) M8 X 16
4) M5 X 16
B
C
Stock Number 561856
Doc: 5618.0714
70
F A
Ø
D
F03\05\07 ISO 5211 MOUNTING PAD
50
E
Ø
Ø
36
K
M
A
B
C
D
E
F
K
M
Weight
inch
8.54
5.39
4.65
3.27
0.73
2.68
2.83
0.91
6.5 lbs
mm
217
137
118
83
18.5
68
72
23
3 kg
Cornelius, N.C. • USA
www.valworx.com 9
561857 Electric Actuator with EPS Positioner 12/24VDC, 50Nm/442 inch lbs Specifications
SERIES
5618
Stock Number
561857 Type Operation
EPS - Electronic Positioning System
Max Torque
442 in lbs / 50 Nm
Voltage
12 or 24 VDC
Input Command Signal
4-20mA or 0-10VDC (selectable)
Output Monitoring Signal
Same type as input signal
Current - Full Load Amps
3.0/1.5 A
Working Time (0-90°/no load)
10 sec
Duty Cycle
60%
Enclosure
Aluminum alloy
Enclosure Protection
ETL Listed to UL429 and CSA C22.2 No.139
Type 4X (IP65) weatherproof
Electrical Connections
1/2” NPT conduit/cable connector
Working Angle Std°
90°
Temperature Range
-4 to +140 °F (-20 to +60 °C)
Motor Protection
Current sensor
Motor Limit Switches
2 x SPDT
Anti-condensation Heater
4 watts
Manual Override
Hex wrench
Valve Mounting per ISO5211
F03, F05, F07
Output Drive DIN3337
14mm (female double square)
Weight
6.5 lbs (3 kg) 14 SQUARE 4) M6 X 16
4) M8 X 16
4) M5 X 16
B
C
Stock Number 561857
Doc: 5618.0714
70
F A
Ø
D
F03\05\07 ISO 5211 MOUNTING PAD
50
E
Ø
Ø
36
K
M
A
B
C
D
E
F
K
M
Weight
inch
8.54
5.39
4.65
3.27
0.73
2.68
2.83
0.91
6.5 lbs
mm
217
137
118
83
18.5
68
72
23
3 kg
Cornelius, N.C. • USA
www.valworx.com 10
561876 Electric Actuator with EPS Positioner 120VAC, 200Nm/1770 inch lbs Specifications
SERIES
5618
Stock Number
561876 Type Operation
EPS - Electronic Positioning System
Max Torque
1770 in lbs / 200 Nm
Voltage
120 VAC 50/60Hz
Input Command Signal
4-20mA or 0-10VDC (selectable)
Output Monitoring Signal
Same type as input signal
Current - Full Load Amps
1.07 A
Working Time (0-90°/no load)
27 sec
Duty Cycle
60%
Enclosure
Aluminum alloy
Enclosure Protection
ETL Listed to UL429 and CSA C22.2 No.139
Type 4X (IP65) weatherproof
Electrical Connections
1/2” NPT conduit/cable connector
Working Angle Std°
90°
Temperature Range
-4 to +140 °F (-20 to +60 °C)
Motor Protection
Thermal overload
Motor Limit Switches
2 x SPDT
Anti-condensation Heater
4 watts
Manual Override
Hex wrench
Valve Mounting per ISO5211
F07, F10
Output Drive DIN3337
22mm (female double square)
Weight
22 lbs (10 kg) 22 SQUARE 4) M8 X 28
4) M10 X 28
E D
F07\10 ISO 5211 MOUNTING PAD
F C
A
Stock Number 561876
Doc: 5618.0714
Ø
K
Ø 7 10 0 2
B
M
A
B
C
D
E
F
K
M
Weight
inch
11.85
7.76
6.30
4.72
0.93
3.82
4.09
0.91
22 lbs
mm
301
197
160
120
23.6
97
104
23
10 kg
Cornelius, N.C. • USA
www.valworx.com 11
561877 Electric Actuator with EPS Positioner 12/24VDC, 200Nm/1770 inch lbs Specifications
SERIES
5618
Stock Number
561877 Type Operation
EPS - Electronic Positioning System
Max Torque
1770 in lbs / 200 Nm
Voltage
12 or 24 VDC
Input Command Signal
4-20mA or 0-10VDC (selectable)
Output Monitoring Signal
Same type as input signal
Current - Full Load Amps
5.6/2.8 A
Working Time (0-90°/no load)
24 sec
Duty Cycle
60%
Enclosure
Aluminum alloy
Enclosure Protection
ETL Listed to UL429 and CSA C22.2 No.139
Type 4X (IP65) weatherproof
Electrical Connections
1/2” NPT conduit/cable connector
Working Angle Std°
90°
Temperature Range
-4 to +140 °F (-20 to +60 °C)
Motor Protection
Current sensor
Motor Limit Switches
2 x SPDT
Anti-condensation Heater
4 watts
Manual Override
Hex wrench
Valve Mounting per ISO5211
F07, F10
Output Drive DIN3337
22mm (female double square)
Weight
22 lbs (10 kg) 22 SQUARE 4) M8 X 28
4) M10 X 28
E D
F07\10 ISO 5211 MOUNTING PAD
F C
A
Stock Number 561877
Doc: 5618.0714
Ø
K
Ø 7 10 0 2
B
M
A
B
C
D
E
F
K
M
Weight
inch
11.85
7.76
6.30
4.72
0.93
3.82
4.09
0.91
22 lbs
mm
301
197
160
120
23.6
97
104
23
10 kg
Cornelius, N.C. • USA
www.valworx.com 12
