Product Sheet: 2N1 Sensor - 76002N1S Description The AquaSmart 2N1 Sensor is a digital sensor that measures both the boiler water temperature and the presence of water therefore removing the need for a stand alone Low Water Cut-off control.
Features & Benefits •
Measures both the boiler water temperature and the presence of water (Low Water Cut-off)
How It Works The AquaSmart 2-in-1 Sensor uses the “conduction” method to detect whether water is present in the boiler. This is done by using the water in the boiler itself to “conduct” a signal and complete an electrical circuit. It is necessary that the ground wire from the sensor be bonded to the boiler wall (not the jacket - unless the jacket is bonded to the boiler wall). When water is not present, there is no “conduction” and the circuit is incomplete.
AquaSmart Boiler Control 2-IN-1 SENSOR Ground Screw
Water Not Present
Water Present
Ground Wire
Pipe Clamp
Incomplete Circuit
Complete Circuit
Water Inlet
Specifications
Part #
Lead Length
Insulation Depth
Insertion Depth
1-1/2”
1-5/8”
(A)
(B)
Storage Temperature Range
-40 to 250F
76002N1S01
8-1/4”
Operating Temperature Range
-32 to 250F
76002N1S02
6-1/4”
3-1/2”
1-5/8”
250PSIG
76002N1S05
5.0”
4-3/4”
1-5/8”
185 - 200 in/lbs.
76002N1S06
8-1/4”
1-1/2”
7/8”
Maximum Pressure Installation Torque Range (Screw-in)
AquaSmart Boiler Temperature Control - 120Vac - Oil
7600B0001U
AquaSmart Boiler Temperature Control - 24Vac - Gas
7600A000LU
AquaSmart Boiler Temperature Control - 120Vac - Oil - LESS Sensor
7600B000LU
AquaSmart Boiler Temperature Control - 24Vac - Gas - LESS Sensor
76002N1S01U
AquaSmart 2N1 Temperature and LWCO Sensor Package 1-1/2” Insulation Depth and 1-5/8” Insertion Depth* - Includes sensor, clamp and ground wire
76002N1S02U
AquaSmart 2N1 Temperature and LWCO Sensor Package 3-1/2” Insulation Depth and 1-5/8” Insertion Depth* - Includes sensor, clamp and ground wire
76002N1S05U
AquaSmart 2N1 Temperature and LWCO Sensor Package 4-3/4” Insulation Depth and 1-5/8” Insertion Depth* - Includes sensor, clamp and ground wire
76002N1S06U
AquaSmart 2N1 Temperature and LWCO Sensor Package 1-1/2” Insulation Depth and 7/8” Insertion Depth* - Includes sensor, clamp and ground wire
* Note1 : 1 5/8 Insertion Depth is critical for vertical or upper boiler mounting ** Note 2: 7/8” Insertion Depth is necssesary for boilers with short casting clearance