8798 - Moen
S p e c i f i c a t i o n s COMMERCIAL DESCRIPTION • Metal construction with chrome plated finish • 1/2" IPS connections • Supplied with vandal resistant screws
OPERATION • • •
4" Wrist blade style handles with hot and cold color indicators Rotate the hot side handle 1/4 turn counterclockwise to open and clockwise to close Rotate the cold side handle 1/4 turn clockwise to open and counterclockwise to close
FLOW •
Aerator is limited to 1.5 gpm max. (5.7 L/min)
Two-Handle Kitchen Faucet
CARTRIDGE • •
1224 cartridge design Nonmetallic and stainless steel material
Model: 8798
STANDARDS •
Third party certified to ASME A112.18.1/CSA B-125.1 and all applicable requirements referenced therein including NSF 61/9
• •
Contains no more than 0.25% weighted average lead content
•
ADA
Complies with California Proposition 65 and with the Federal Safe Water Drinking Act for lever handles
NOTE: This faucet is designed to be installed through 3 holes, 1" min. dia. and 4" on centers
WARRANTY •
Warranted for 5 years against material or manufacturing defects
4-19/64" (109mm)
6-21/32" (169mm)
8-7/8" (226mm)
5-3/4" (146mm)
4-5/8" (117mm)
4" (51mm)
4" (51mm)
1-1/8" (29mm) MAX. DECK THICKNESS
10-1/4" (260mm)
2-1/2" (64mm)
CRITICAL DIMENSIONS (DO NOT SCALE)
Rev. 9/12
MOEN SPECIFIER SERVICES 1-800-321-8809 Ext. 2158 www.moen.com
OPERATION • • •
4" Wrist blade style handles with hot and cold color indicators Rotate the hot side handle 1/4 turn counterclockwise to open and clockwise to close Rotate the cold side handle 1/4 turn clockwise to open and counterclockwise to close
FLOW •
Aerator is limited to 1.5 gpm max. (5.7 L/min)
Two-Handle Kitchen Faucet
CARTRIDGE • •
1224 cartridge design Nonmetallic and stainless steel material
Model: 8798
STANDARDS •
Third party certified to ASME A112.18.1/CSA B-125.1 and all applicable requirements referenced therein including NSF 61/9
• •
Contains no more than 0.25% weighted average lead content
•
ADA
Complies with California Proposition 65 and with the Federal Safe Water Drinking Act for lever handles
NOTE: This faucet is designed to be installed through 3 holes, 1" min. dia. and 4" on centers
WARRANTY •
Warranted for 5 years against material or manufacturing defects
4-19/64" (109mm)
6-21/32" (169mm)
8-7/8" (226mm)
5-3/4" (146mm)
4-5/8" (117mm)
4" (51mm)
4" (51mm)
1-1/8" (29mm) MAX. DECK THICKNESS
10-1/4" (260mm)
2-1/2" (64mm)
CRITICAL DIMENSIONS (DO NOT SCALE)
Rev. 9/12
MOEN SPECIFIER SERVICES 1-800-321-8809 Ext. 2158 www.moen.com
