951855 SolaMaster Counter Flashing Installation Instructions

330 DS / 750 DS Counter Flashing Installation Instructions Appendix For 330 DS / 750 DS Self-Flashings Parts List 1

Quantity

Counter Flashing

(1)

Additional Materials and Tools

Quantity

1

Membrane Flashing Boot (Not Provided)

1

2

Hose Clamp (Not Provided)

1

3

Silicone Sealant (Not Provided)

-

Note: These installation instructions are intended to provide basic installation practices for attaching and installing a Membrane Flashing Boot. Solatube International Inc. does not provide these materials and should be sourced by others. Please follow all manufacturers recommendations for proper installation and water proofing methods.

1

Place Membrane Flashing Boot over Self-Flashing

b

Membrane Flashing Boot

a

Hot Air Gun

2

Apply Hose Clamp to top edge of Membrane Flashing Boot

3

Install Counter Flashing

Counter Flashing

a

Hose Clamp

a

Install Hose Clamp no closer than 1/2 inch from top edge of flashing to ensure proper fit of Counter Flashing

b

b Securely Fasten Hose Clamp and Apply Silicone to Seal Top Edge

Return to main set of instructions (P/N: 950160) to complete installation.

For the most current Installation Instructions, please visit www.solatube.com/instructions

1

Solatube International, Inc. | 2210 Oak Ridge Way | Vista, CA 92081-8341 | www.solatube.com | T: 888.SOLATUBE © 2016 Solatube International, Inc.

Part No. 951855 v1.0