Adjustable Tablet Holder - RJ Cooper
RJ Cooper & Assoc., Inc.
1-800-RJCooper 949-582-2571 Fax: 949-582-3169 Internet: rjcooper.com Email: [email protected]
Adjustable Tablet Holder Install 1. Open the expansion lever on the rear of the Holder, to allow the Holder 'arms' to slide apart. 2. Screw the 'Tipper' into the end of your Arm (Mini, Articulating, or Magic, or your own). If you ordered your Arm in the same order, this step is, most likely, already done. 3. Snap the Tipper into the 'Quick Connect' on the rear of the Holder. It should firmly 'snap' into place. Either direction is fine. 4. Position the Holder so that the stationary arm is on the bottom. 5. Pull up on the upper arm to allow insertion of your tablet/iPad. 5. Insert your tablet/iPad, with or without case, on top of the bottom arm. 6. Lower the upper arm and really press firmly down, to hold your tablet/iPad in place. 7. Lock the upper arm with the expansion lever on the rear of the Holder. Removal - You have 2 choices: 1. Open the expansion lever on the rear, expand the upper half, and remove your tablet/ipad. Or... 2. Press on the rear lever (labeled "lever" below) towards the ipad, separate the Tipper from the Holder's quick-connect.
Enjoy!
1-800-RJCooper 949-582-2571 Fax: 949-582-3169 Internet: rjcooper.com Email: [email protected]
Adjustable Tablet Holder Install 1. Open the expansion lever on the rear of the Holder, to allow the Holder 'arms' to slide apart. 2. Screw the 'Tipper' into the end of your Arm (Mini, Articulating, or Magic, or your own). If you ordered your Arm in the same order, this step is, most likely, already done. 3. Snap the Tipper into the 'Quick Connect' on the rear of the Holder. It should firmly 'snap' into place. Either direction is fine. 4. Position the Holder so that the stationary arm is on the bottom. 5. Pull up on the upper arm to allow insertion of your tablet/iPad. 5. Insert your tablet/iPad, with or without case, on top of the bottom arm. 6. Lower the upper arm and really press firmly down, to hold your tablet/iPad in place. 7. Lock the upper arm with the expansion lever on the rear of the Holder. Removal - You have 2 choices: 1. Open the expansion lever on the rear, expand the upper half, and remove your tablet/ipad. Or... 2. Press on the rear lever (labeled "lever" below) towards the ipad, separate the Tipper from the Holder's quick-connect.
Enjoy!
