Aero tack 20oz sales Sheet

AERO -TACK 20 oz. AEROSOL DUCT LINER and GENERAL PURPOSE ADHESIVE Fast Tacking • Variable Pattern • Adjustable Spray Recommended Uses Use AERO-TACK as an adhesive to position and hold all types of insulation to metal, fiberglass, paper and wood. May also be used to bond to a variety of different substrates. Application

Apply AERO-TACK to clean substrate, holding container 6 to 8 inches from surface. Apply full, even coats.

Dry Time

Tack is immediate. Open time is approximately 3 -5 minutes. Fully bonded in 24 hours.

Temperature Limits

Storage and application.. 20ºF to 100ºF Service...........................-30ºF to 100ºF

Color

Clear

Packaging

20 oz. (12 oz. net wt.) aerosol can

Precautions

Flammable. Contents under pressure. Use only in well-ventilated area. Keep away from heat and flame. Avoid prolonged exposure to vapor. Avoid contact with skin or eyes. Do not puncture or incinerate container. Do not expose to heat or store at temperatures above 120ºF. In case of eye contact, flush thoroughly for at least 15 minutes and get medical attention.

Clean Up

Use mineral spirits or similar solvent with appropriate safety precautions.

www.polymeradhesives.com 501 Garrett Morris Parkway, Mineral Wells, TX 76067

(888) 721-SEAL Fax (888) 921-7325