AG65033, AG6503C3, AG6503L3
SURGE PROTECTIVE DEVICE ANSI / UL 1449 3rd Edition
AG65033, AG6503C3, AG6503L3 • For up to 600 VAC Three phase Wye applications
For applications up to 420 VAC line-to-ground
• For installation in Type 1 and Type 2 locations
Service Entrance, branch panel and individual equipment applications
• Parallel installation • Multi-Mode protection
Type 1 & 2
Line-to-Ground Line-to-Line
• NEMA 4 polycarbonate plastic enclosure
1/2" nipple wire entry UV resistant
Type 2
• 18" 10-gauge color coded leads
32" 10-gauge for AG6503L3
• Mounting Bracket Option (AG1BRKT) • CSA Listed to U.S. and Canadian safety standards
2.50”
ANSI / UL1449 3rd Edition
• Short Circuit Current Rating (SCCR): 50 kA • Nominal Discharge Current Rating (In): 20 kA • One year product limited warranty • Green status indicator light
1.38”
Features and Applications: The AG6503 Series is a Type 2 Metal Oxide Varistor (MOV) based hardwired device that is CSA listed as a Surge Protective Device (SPD). SPDs are designed to protect electrical equipment from the damaging effects of transient surges caused by lightning, utility switching, electric motor cycling, insulation arcing and various other large or sudden changes in electric current flow.
2.50”
Mounting Bracket
2.950” 0.550”
0.60” 3.375”
The AG6503 Series is a three phase, three-pole SPD designed to protect all three phase electrical systems up to 420 volts AC phase to ground. Installation of the SPD can be made indoors or outdoors. Surge Protective Devices may be installed at the meter can or on the service entrance. Installation is allowed on the line side or the load side of the main disconnect of the service. SPDs may also be installed at an individual piece of equipment. The AG6503 Series housing is molded from weather and UV resistant polycarbonate which complies with the UL Standard for strength and flame resistance. All electrical connections in the AG Series are imbedded in a UL recognized epoxy to seal and protect them from moisture and corrosion. The AG6503L3 is designed for installations that require additional lead length. A partial list of applications for which the AG Series is recommended includes building electric service entrances, garages, street lights, traffic control lights and controllers, parking lot lights, electric motors for irrigation and farm applications, water and sewage lift stations.
Performance Characteristics: MODEL
SERVICE POLES VOLTAGE
LEADS & WIRE VOLTAGE PROTECTION RATING LENGTH CONFIGURATION (VPR)
AG6503 347 / 600 3 series
Specifications:
4-18" or 32" L1, L2, L3, N/GND 10 GAUGE
L-N/G
L-L
1500
2500
Wiring Diagram:
Technology: Metal Oxide Varistors (MOV) Configuration: Each line to ground/neutral Maximum Line Voltage: 420 volts AC line-to-ground Line Enclosure: Weatherproof and UV resistant NEMA 4 molded polycarbonate with threaded 600 V Line polycarbonate nipple Mounting: 1/2" x 20 threaded nipple 600 V Line Mounting Bracket: Right angle aluminum bracket N / Ground (Optional) Order AG1BRKT Wiring: 18" of 10 gauge stranded copper wire is preconnected for each phase, neutral and ground. AG6503L3: 36" leads Wire Color Code: Black - phase leads, White - neutral/ground lead WEIGHT: 1 pound Agency Listings: cCSAus; UL1449 3rd Edition Ambient Operating Temperature: - 40 to + 85º C (- 40 to + 185º F)
BLACK
347 V
600 V
BLACK
347 V 347 V
BLACK WHITE
Suggested Specifications: The Surge Protective Device shall be listed by CSA for Type 1 and Type 2 locations for US and Type 2 for Canada. The Surge Protective Device shall provide protection between each phase conductor and ground. The Maximum Continuous Operating Voltage (MCOV) shall be a minimum of 420 volts AC between phase and ground. The Surge Protective Device shall employ MOVs and provide protection from Category ‘C’ level transient surges without degradation of components. The housing shall be constructed of UV resistant polycarbonate or material of equal strength and UV resistance. All electrical connections shall be sealed in a UL component recognized epoxy to exclude moisture, dirt and corrosion. The encapsulation shall have a minimum UL Flame Class rating of 94V-0. A one-half inch threaded nipple and locknut shall be provided. Leads shall be a minimum of ten gauge and eighteen inches in length. When subjected to the ANSI / UL 1449 3rd Edition testing impulses, the Voltage Protection Rating shall be no Greater than 1500 volts Line-to-Neutral / Ground or 2500 volts Line-to-Line. The Surge Protective Device shall carry a one year warranty and be manufactured by a company who has engaged in the manufacture of such products for a minimum of five years.
LIMITED ONE YEAR WARRANTY If within the warranty period specified, this product fails due to a defect in material or workmanship, Intermatic Incorporated will repair or replace it, at its sole option, free of charge. This warranty is extended to the original household purchaser only and is not transferable. This warranty does not apply to: (a) damage to units caused by accident, dropping or abuse in handling, acts of God or any negligent use; (b) units which have been subject to unauthorized repair, opened, taken apart or otherwise modified; (c) units not used in accordance with instructions; (d) damages exceeding the cost of the product; (e) sealed lamps and/or lamp bulbs, LEDs and batteries; (f) the finish on any portion of the product, such as surface and/or weathering, as this is considered normal wear and tear; (g) transit damage, initial installation costs, removal costs, or reinstallation costs. INTERMATIC INCORPORATED WILL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. THIS WARRANTY IS IN LIEU OF ALL OTHER EXPRESS OR IMPLIED WARRANTIES. ALL IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY AND THE WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY MODIFIED TO EXIST ONLY AS CONTAINED IN THIS LIMITED WARRANTY, AND SHALL BE OF THE SAME DURATION AS THE WARRANTY PERIOD STATED ABOVE. SOME STATES DO NOT ALLOW LIMITATIONS ON THE DURATION OF AN IMPLIED WARRANTY, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. This warranty service is available by either (a) returning the product to the dealer from whom the unit was purchased, or (b) completing a warranty claim on line at www.intermatic.com. This warranty is made by: Intermatic Incorporated Customer Service, 7777 Winn Rd., Spring Grove, Illinois 60081-9698 / 815-675-7000 http://www.intermatic.com ©2010 Intermatic Inc. 7777 Winn Road, Spring Grove, IL 60081 www.intermatic.com
300AG10029
AG65033, AG6503C3, AG6503L3 • For up to 600 VAC Three phase Wye applications
For applications up to 420 VAC line-to-ground
• For installation in Type 1 and Type 2 locations
Service Entrance, branch panel and individual equipment applications
• Parallel installation • Multi-Mode protection
Type 1 & 2
Line-to-Ground Line-to-Line
• NEMA 4 polycarbonate plastic enclosure
1/2" nipple wire entry UV resistant
Type 2
• 18" 10-gauge color coded leads
32" 10-gauge for AG6503L3
• Mounting Bracket Option (AG1BRKT) • CSA Listed to U.S. and Canadian safety standards
2.50”
ANSI / UL1449 3rd Edition
• Short Circuit Current Rating (SCCR): 50 kA • Nominal Discharge Current Rating (In): 20 kA • One year product limited warranty • Green status indicator light
1.38”
Features and Applications: The AG6503 Series is a Type 2 Metal Oxide Varistor (MOV) based hardwired device that is CSA listed as a Surge Protective Device (SPD). SPDs are designed to protect electrical equipment from the damaging effects of transient surges caused by lightning, utility switching, electric motor cycling, insulation arcing and various other large or sudden changes in electric current flow.
2.50”
Mounting Bracket
2.950” 0.550”
0.60” 3.375”
The AG6503 Series is a three phase, three-pole SPD designed to protect all three phase electrical systems up to 420 volts AC phase to ground. Installation of the SPD can be made indoors or outdoors. Surge Protective Devices may be installed at the meter can or on the service entrance. Installation is allowed on the line side or the load side of the main disconnect of the service. SPDs may also be installed at an individual piece of equipment. The AG6503 Series housing is molded from weather and UV resistant polycarbonate which complies with the UL Standard for strength and flame resistance. All electrical connections in the AG Series are imbedded in a UL recognized epoxy to seal and protect them from moisture and corrosion. The AG6503L3 is designed for installations that require additional lead length. A partial list of applications for which the AG Series is recommended includes building electric service entrances, garages, street lights, traffic control lights and controllers, parking lot lights, electric motors for irrigation and farm applications, water and sewage lift stations.
Performance Characteristics: MODEL
SERVICE POLES VOLTAGE
LEADS & WIRE VOLTAGE PROTECTION RATING LENGTH CONFIGURATION (VPR)
AG6503 347 / 600 3 series
Specifications:
4-18" or 32" L1, L2, L3, N/GND 10 GAUGE
L-N/G
L-L
1500
2500
Wiring Diagram:
Technology: Metal Oxide Varistors (MOV) Configuration: Each line to ground/neutral Maximum Line Voltage: 420 volts AC line-to-ground Line Enclosure: Weatherproof and UV resistant NEMA 4 molded polycarbonate with threaded 600 V Line polycarbonate nipple Mounting: 1/2" x 20 threaded nipple 600 V Line Mounting Bracket: Right angle aluminum bracket N / Ground (Optional) Order AG1BRKT Wiring: 18" of 10 gauge stranded copper wire is preconnected for each phase, neutral and ground. AG6503L3: 36" leads Wire Color Code: Black - phase leads, White - neutral/ground lead WEIGHT: 1 pound Agency Listings: cCSAus; UL1449 3rd Edition Ambient Operating Temperature: - 40 to + 85º C (- 40 to + 185º F)
BLACK
347 V
600 V
BLACK
347 V 347 V
BLACK WHITE
Suggested Specifications: The Surge Protective Device shall be listed by CSA for Type 1 and Type 2 locations for US and Type 2 for Canada. The Surge Protective Device shall provide protection between each phase conductor and ground. The Maximum Continuous Operating Voltage (MCOV) shall be a minimum of 420 volts AC between phase and ground. The Surge Protective Device shall employ MOVs and provide protection from Category ‘C’ level transient surges without degradation of components. The housing shall be constructed of UV resistant polycarbonate or material of equal strength and UV resistance. All electrical connections shall be sealed in a UL component recognized epoxy to exclude moisture, dirt and corrosion. The encapsulation shall have a minimum UL Flame Class rating of 94V-0. A one-half inch threaded nipple and locknut shall be provided. Leads shall be a minimum of ten gauge and eighteen inches in length. When subjected to the ANSI / UL 1449 3rd Edition testing impulses, the Voltage Protection Rating shall be no Greater than 1500 volts Line-to-Neutral / Ground or 2500 volts Line-to-Line. The Surge Protective Device shall carry a one year warranty and be manufactured by a company who has engaged in the manufacture of such products for a minimum of five years.
LIMITED ONE YEAR WARRANTY If within the warranty period specified, this product fails due to a defect in material or workmanship, Intermatic Incorporated will repair or replace it, at its sole option, free of charge. This warranty is extended to the original household purchaser only and is not transferable. This warranty does not apply to: (a) damage to units caused by accident, dropping or abuse in handling, acts of God or any negligent use; (b) units which have been subject to unauthorized repair, opened, taken apart or otherwise modified; (c) units not used in accordance with instructions; (d) damages exceeding the cost of the product; (e) sealed lamps and/or lamp bulbs, LEDs and batteries; (f) the finish on any portion of the product, such as surface and/or weathering, as this is considered normal wear and tear; (g) transit damage, initial installation costs, removal costs, or reinstallation costs. INTERMATIC INCORPORATED WILL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. THIS WARRANTY IS IN LIEU OF ALL OTHER EXPRESS OR IMPLIED WARRANTIES. ALL IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY AND THE WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY MODIFIED TO EXIST ONLY AS CONTAINED IN THIS LIMITED WARRANTY, AND SHALL BE OF THE SAME DURATION AS THE WARRANTY PERIOD STATED ABOVE. SOME STATES DO NOT ALLOW LIMITATIONS ON THE DURATION OF AN IMPLIED WARRANTY, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. This warranty service is available by either (a) returning the product to the dealer from whom the unit was purchased, or (b) completing a warranty claim on line at www.intermatic.com. This warranty is made by: Intermatic Incorporated Customer Service, 7777 Winn Rd., Spring Grove, Illinois 60081-9698 / 815-675-7000 http://www.intermatic.com ©2010 Intermatic Inc. 7777 Winn Road, Spring Grove, IL 60081 www.intermatic.com
300AG10029
