angle fittings & connectors - Hajoca
ANGLE FITTINGS & CONNECTORS q AS 921
q EG, q GR
q EG, q GR, q ZTC
q AS 603
1-HOLE ANGLE
A
2-HOLE END ANGLE
Catalog No.
A
AS 921 A
37 ⁄ 8 "
61
AS 921 B
57⁄ 8"
84
AS 921 C
77⁄ 8"
107
AS 921 D
97⁄ 8"
130
2"
Wt./100 Pcs.
7"
18
7"
18
Std Pkg 25 - Wt/100 pcs: See chart above.
q AS 604
Std Pkg 50 - Wt/100 pcs: 37 Lbs.
q EG, q GR, q ZTC
q EG, q GR
q AS 806
2-HOLE CORNER ANGLE
2-HOLE ANGLE WITH IMPRESSIONS ON BOTH LEGS
1" 24
2"
5"
18
2"
Std Pkg 50 - Wt/100 pcs: 37 Lbs.
q AS 745
Std Pkg 50 - Wt/100 pcs: 39 Lbs.
q EG, q GR, q ZTC
q EG, q GR, q ZTC
q AS 606
3-HOLE CORNER ANGLE
3-HOLE CORNER ANGLE 5"
18
7" 38
7"
18
1"
48
Std Pkg 25 - Wt/100 pcs: 57 Lbs. 1
Std Pkg 50 - Wt/100 pcs: 57 Lbs. 5
9
7
Page notes unless otherwise specified: ⁄ 4" thick, 1 ⁄ 8" wide, holes ⁄ 16" diameter, spaced 1 ⁄ 8" on center and 13⁄ 16" from end. LEGEND: GR: Powder Coated Supr-Green EG: Electro-Galvanized PG: Pre-Galvanized AL: Aluminum HG: Hot Dipped Galvanized PL: Plain SS: Stainless Steel ZTC: Zinc Trivalent Chromium Stainless Steel (SS), Zinc Trivalent Chromium (ZTC) and Hot Dipped Galvanized (HG) are specialty finishes. Pricing is located in the Specialty Strut Section of the Anvil-Strut price book.
PROJECT INFORMATION
APPROVAL STAMP
Contractor:
q Approved q Approved as noted q Not approved
Engineer:
Remarks:
Project: Address:
Submittal Date: Notes 1: Notes 2: AS-6.15
q EG, q GR
q EG, q GR, q ZTC
q AS 603
1-HOLE ANGLE
A
2-HOLE END ANGLE
Catalog No.
A
AS 921 A
37 ⁄ 8 "
61
AS 921 B
57⁄ 8"
84
AS 921 C
77⁄ 8"
107
AS 921 D
97⁄ 8"
130
2"
Wt./100 Pcs.
7"
18
7"
18
Std Pkg 25 - Wt/100 pcs: See chart above.
q AS 604
Std Pkg 50 - Wt/100 pcs: 37 Lbs.
q EG, q GR, q ZTC
q EG, q GR
q AS 806
2-HOLE CORNER ANGLE
2-HOLE ANGLE WITH IMPRESSIONS ON BOTH LEGS
1" 24
2"
5"
18
2"
Std Pkg 50 - Wt/100 pcs: 37 Lbs.
q AS 745
Std Pkg 50 - Wt/100 pcs: 39 Lbs.
q EG, q GR, q ZTC
q EG, q GR, q ZTC
q AS 606
3-HOLE CORNER ANGLE
3-HOLE CORNER ANGLE 5"
18
7" 38
7"
18
1"
48
Std Pkg 25 - Wt/100 pcs: 57 Lbs. 1
Std Pkg 50 - Wt/100 pcs: 57 Lbs. 5
9
7
Page notes unless otherwise specified: ⁄ 4" thick, 1 ⁄ 8" wide, holes ⁄ 16" diameter, spaced 1 ⁄ 8" on center and 13⁄ 16" from end. LEGEND: GR: Powder Coated Supr-Green EG: Electro-Galvanized PG: Pre-Galvanized AL: Aluminum HG: Hot Dipped Galvanized PL: Plain SS: Stainless Steel ZTC: Zinc Trivalent Chromium Stainless Steel (SS), Zinc Trivalent Chromium (ZTC) and Hot Dipped Galvanized (HG) are specialty finishes. Pricing is located in the Specialty Strut Section of the Anvil-Strut price book.
PROJECT INFORMATION
APPROVAL STAMP
Contractor:
q Approved q Approved as noted q Not approved
Engineer:
Remarks:
Project: Address:
Submittal Date: Notes 1: Notes 2: AS-6.15
