angle fittings & connectors - Hajoca
ANGLE FITTINGS & CONNECTORS q EG, q GR, q ZTC
q AS 607
q EG, q GR
q AS 715
4-HOLE CORNER ANGLE
“T” PLATE - 90° ANGLE
1"
48
3"
58
2" 1"
32
Std Pkg 25 - Wt/100 pcs: 78 Lbs.
q AS 3373
Std Pkg 20 - Wt/100 pcs: 77 Lbs.
q EG, q GR, q ZTC
q EG, q GR, q ZTC
q AS 605
3-HOLE CORNER ANGLE
UNIVERSAL ANGLE BRACKET 4"
4" 1"
24
1"
32
Std Pkg 10 - Wt/100 pcs: 132 Lbs.
q AS 720
Std Pkg 25 - Wt/100 pcs: 57 Lbs.
q EG, q GR, q ZTC
q AS 2144
RH & LH ANGLE PLATE CONNECTOR
q EG, q GR CORNER ANGLE
1"
32
7"
18
A
A
Wt./100 Pcs.
3"
48
31 ⁄ 2 "
53
4"
60
7"
18
2"
Std Pkg 25 - Wt/100 pcs: 54 Lbs. 1
Std Pkg 25 - Wt/100 pcs: See chart above. 5
9
Page notes unless otherwise specified: ⁄ 4" thick, 1 ⁄ 8" wide, holes ⁄ 16" diameter, spaced 17⁄ 8" on center and 13⁄ 16" from end. LEGEND: GR: Powder Coated Supr-Green EG: Electro-Galvanized PG: Pre-Galvanized AL: Aluminum HG: Hot Dipped Galvanized PL: Plain SS: Stainless Steel ZTC: Zinc Trivalent Chromium Stainless Steel (SS), Zinc Trivalent Chromium (ZTC) and Hot Dipped Galvanized (HG) are specialty finishes. Pricing is located in the Specialty Strut Section of the Anvil-Strut price book.
PROJECT INFORMATION
APPROVAL STAMP
Contractor:
q Approved q Approved as noted q Not approved
Engineer:
Remarks:
Project: Address:
Submittal Date: Notes 1: Notes 2: AS-1.15
q AS 607
q EG, q GR
q AS 715
4-HOLE CORNER ANGLE
“T” PLATE - 90° ANGLE
1"
48
3"
58
2" 1"
32
Std Pkg 25 - Wt/100 pcs: 78 Lbs.
q AS 3373
Std Pkg 20 - Wt/100 pcs: 77 Lbs.
q EG, q GR, q ZTC
q EG, q GR, q ZTC
q AS 605
3-HOLE CORNER ANGLE
UNIVERSAL ANGLE BRACKET 4"
4" 1"
24
1"
32
Std Pkg 10 - Wt/100 pcs: 132 Lbs.
q AS 720
Std Pkg 25 - Wt/100 pcs: 57 Lbs.
q EG, q GR, q ZTC
q AS 2144
RH & LH ANGLE PLATE CONNECTOR
q EG, q GR CORNER ANGLE
1"
32
7"
18
A
A
Wt./100 Pcs.
3"
48
31 ⁄ 2 "
53
4"
60
7"
18
2"
Std Pkg 25 - Wt/100 pcs: 54 Lbs. 1
Std Pkg 25 - Wt/100 pcs: See chart above. 5
9
Page notes unless otherwise specified: ⁄ 4" thick, 1 ⁄ 8" wide, holes ⁄ 16" diameter, spaced 17⁄ 8" on center and 13⁄ 16" from end. LEGEND: GR: Powder Coated Supr-Green EG: Electro-Galvanized PG: Pre-Galvanized AL: Aluminum HG: Hot Dipped Galvanized PL: Plain SS: Stainless Steel ZTC: Zinc Trivalent Chromium Stainless Steel (SS), Zinc Trivalent Chromium (ZTC) and Hot Dipped Galvanized (HG) are specialty finishes. Pricing is located in the Specialty Strut Section of the Anvil-Strut price book.
PROJECT INFORMATION
APPROVAL STAMP
Contractor:
q Approved q Approved as noted q Not approved
Engineer:
Remarks:
Project: Address:
Submittal Date: Notes 1: Notes 2: AS-1.15
