angle fittings & connectors
ANGLE FITTINGS & CONNECTORS q AS 2520
q EG, q GR
q AS 2545
TWO HOLE ADJUSTMENT ANGLE
q EG, q GR SLOTTED 90° ANGLE 5"
28
5"
116
Slot Size 1 1/2" x 9/16"
2" Slot Size 1 1/2"
5"
18 1"
32
Std Pkg 25 - Wt/100 pcs: 42 Lbs.
q AS 3049
Std Pkg 50 - Wt/100 pcs: 38 Lbs.
q EG, q GR
q AS 793
2-HOLE SLOTTED 90° CORNER CONNECTOR
q EG, q GR
4-HOLE CLOSED ANGLE CONNECTOR
5"
28
A
5" 116
A
9"
4 16
Slot Size 1 1/2" x 9/16"
371⁄ 2° 45° 521⁄ 2°
7"
38
60° 671⁄ 2°
9"
4 16
75° 821⁄ 2°
Std Pkg 25 - Wt/100 pcs: 66 Lbs.
q AS 763, q AS 764
Std Pkg 25 - Wt/100 pcs: 100 Lbs.
q EG, q GR SLOTTED ADJUSTMENT CORNER ANGLE
A Slot Size 2 1/2" x 9/16"
Catalog No.
A
B
Wt./100 Pcs.
AS 763
47⁄ 16"
21 ⁄ 2 "
58
AS 764
67 ⁄ 8 "
41 ⁄ 2 "
85
7"
18
B
Std Pkg: 25 - Wt/100 pcs: See chart above. 1
5
Page notes unless otherwise specified: ⁄ 4" thick, 1 ⁄ 8" wide, holes 9⁄ 16" diameter, spaced 17⁄ 8" on center and 13⁄ 16" from end. LEGEND: GR: Powder Coated Supr-Green EG: Electro-Galvanized PG: Pre-Galvanized AL: Aluminum HG: Hot Dipped Galvanized PL: Plain SS: Stainless Steel ZTC: Zinc Trivalent Chromium Stainless Steel (SS), Zinc Trivalent Chromium (ZTC) and Hot Dipped Galvanized (HG) are specialty finishes. Pricing is located in the Specialty Strut Section of the Anvil-Strut price book.
PROJECT INFORMATION
APPROVAL STAMP
Contractor:
q Approved q Approved as noted q Not approved
Engineer:
Remarks:
Project: Address:
Submittal Date: Notes 1: Notes 2: AS-6.15
q EG, q GR
q AS 2545
TWO HOLE ADJUSTMENT ANGLE
q EG, q GR SLOTTED 90° ANGLE 5"
28
5"
116
Slot Size 1 1/2" x 9/16"
2" Slot Size 1 1/2"
5"
18 1"
32
Std Pkg 25 - Wt/100 pcs: 42 Lbs.
q AS 3049
Std Pkg 50 - Wt/100 pcs: 38 Lbs.
q EG, q GR
q AS 793
2-HOLE SLOTTED 90° CORNER CONNECTOR
q EG, q GR
4-HOLE CLOSED ANGLE CONNECTOR
5"
28
A
5" 116
A
9"
4 16
Slot Size 1 1/2" x 9/16"
371⁄ 2° 45° 521⁄ 2°
7"
38
60° 671⁄ 2°
9"
4 16
75° 821⁄ 2°
Std Pkg 25 - Wt/100 pcs: 66 Lbs.
q AS 763, q AS 764
Std Pkg 25 - Wt/100 pcs: 100 Lbs.
q EG, q GR SLOTTED ADJUSTMENT CORNER ANGLE
A Slot Size 2 1/2" x 9/16"
Catalog No.
A
B
Wt./100 Pcs.
AS 763
47⁄ 16"
21 ⁄ 2 "
58
AS 764
67 ⁄ 8 "
41 ⁄ 2 "
85
7"
18
B
Std Pkg: 25 - Wt/100 pcs: See chart above. 1
5
Page notes unless otherwise specified: ⁄ 4" thick, 1 ⁄ 8" wide, holes 9⁄ 16" diameter, spaced 17⁄ 8" on center and 13⁄ 16" from end. LEGEND: GR: Powder Coated Supr-Green EG: Electro-Galvanized PG: Pre-Galvanized AL: Aluminum HG: Hot Dipped Galvanized PL: Plain SS: Stainless Steel ZTC: Zinc Trivalent Chromium Stainless Steel (SS), Zinc Trivalent Chromium (ZTC) and Hot Dipped Galvanized (HG) are specialty finishes. Pricing is located in the Specialty Strut Section of the Anvil-Strut price book.
PROJECT INFORMATION
APPROVAL STAMP
Contractor:
q Approved q Approved as noted q Not approved
Engineer:
Remarks:
Project: Address:
Submittal Date: Notes 1: Notes 2: AS-6.15
