Apple Studio Display M7649 Stand Replacement

Apple Studio Display M7649 Stand Replacement

Apple Studio Display M7649 Stand Replacement Written By: Alan Truong

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 1 of 3

Apple Studio Display M7649 Stand Replacement

INTRODUCTION Replacing the stand of the Apple Display. This stand allows the display to be viewed in an upright position.

TOOLS: 2 mm Hex Screwdriver (1)

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 2 of 3

Apple Studio Display M7649 Stand Replacement

Step 1 — Stand



Lay the display facing down with the stand away from you.



Remove the three size 2.0 hex screws on the swing arm and remove the swing arm as well as the plastic shield under it.

This document was last generated on 2017-07-20 02:29:35 PM.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 3 of 3