AquaFinesse® SpaClean SpaClean loosens slime, grime, debris and calcium from spas, jetted bath tubs and equipment. It thoroughly cleans your spa from the inside out! For Spas & Hot Tubs • Remove filters and clean them using AquaFinesse® Filter Cleaner (per filter cleaner instructions) • Leave water in tub, open all valves and jets, including blower and water fall (water temperature should be above 90 degrees Fahrenheit/32 degrees Celcius) • Add chlorine shock to the tub • Put the SpaClean tablet in basket above the filter or use a floating dispenser to dissolve the SpaClean tablet • Run the pump(s) on full power for 20 minutes, 3 times within 24 hours. (for optimal results repeat cleaning process until next day) • After 24 hours drain your hot tub and clean the walls with fresh water • Fill hot tub with fresh tap water & begin regular treatment with AquaFinesse® Water Care For Jetted Bath Tubs Treatment can be done after taking a bath, to save water. • Place SpaClean tablet in the tub with bathwater • Open all the jets • Run tub jet pump for a minimum of 3 cycles • Drain and rinse out tub We recommend that based on hot tub & spa usage patterns, SpaClean should be used before draining. For jetted bath tubs we recommend every 3 months. Caution: KEEP OUT OF THE REACH OF CHILDREN. Safety: Keep away from food, drink and animals. Do not ingest. Avoid contact with skin and eyes (rinse skin or flush eyes in the event of accidental prolonged contact). Wear suitable protective clothing ( gloves and eye protection ). In case of accident seek medical attention immediately. Risk: May cause burns and irritation to the respiratory system if used incorrectly.