468
General Data
Type reference: Description: Approvals: Protection class: Operating travel: Connection: Contact material: Max. storage temperature: Max. operating temperature: Mechanical life: Electrical life: Contact resistance NO: Contact resistance NC: Min. current: Min. voltage: Bouncing time NO: Bouncing time NC: Positive opening NC contact:
AZ... twin contact blocks, two-piece plungers, positive opening CCC, cCSAus, ENEC05, KEMA, CE, GOST-R, NV, TÜV_Süd II (protective insulation) 6 mm Faston terminals 2.8x0.8 mm AgNi -50°C ... 85°C -30°C ... 70°C 1 million operations 1million cycles at rated load < 20 mOhm (new state) < 20 mOhm (new state) 1 mA (under laboratory conditions) 5V < 10ms < 20ms acc.t o EN60947-5-1, Anh. Positiv
Electrical Data acc. to IEC/EN 60947-5-1 (VDE 0660 sect. 200) Utilisation category: Rated insulation voltage Ui: Rated operational voltage Ue: Rated operational current Ie: Breaking capacity: Continuous thermal current:
alternating current AC15 A300 250 V 250V 3 A 10Ie 6 A
direct current DC13 Q300 300 V 250V / 125V / 60V / 24V 0.2A / 0.4A / 1A / 2A 1.1Ie 6A
Electrical Data acc. to IEC/EN 61058-1 (VDE 0630 sect 1)
Rated voltage Ue: Rated current Ie:
250 V~ 6(4) A
Electrical Features with 5µm gold-plating (type addition ..._AU)
Operating voltage: Operating current: Contact resistance (new state):
20mV ... 42V AC/DC 1mA ... 250mA < 50 mOhm
Notice for emergency-stop contact blocks: For inverters of the Za type only the NC contact must be used for remotely controlled safety circuits acc. to EN 60947-5-1.
469
Contact Blocks Faston terminals 2.8x0.8 mm
6 mm
6 mm
Illustration
Description
Contact Block, momentary 1NC + 1NO + 1NO early make Faston terminals 2.8x0.8 mm suitable plug-in socket XAP8 contact material
AgNi
AZ011
contact material
AgNi, gold-plated
AZ011_AU
Two-step Contact Block, momentary 1NC + 1NO + 1NO early make Faston terminals 2.8x0.8 mm suitable plug-in socket XAP10 contact material
6 mm
6 mm
6 mm
6 mm
470
Type
AgNi
AZ011_97
Contact Block, momentary 2NC Faston terminals 2.8x0.8 mm suitable plug-in socket XAP4 contact material
AgNi
AZOO
contact material
AgNi, gold-plated
AZOO_AU
Contact Block, momentary 1NC + 1NO + 1centre contact Faston terminals 2.8x0.8 mm 60V/1A DC; 60V/3A AC (inductive load) 40V/5A; 50V/4A; 60V/3A (non-inductive load, DC) suitable plug-in socket XAP8 contact material AgNi
AZOW1
Contact Block, momentary 1NC + 1NO + 1centre contact Faston terminals 2.8x0.8 mm suitable plug-in socket XAP8 contact material
AgNi
AZ111
contact material
AgNi, gold-plated
AZ111_AU
Contact Block, momentary 2NC + 2NO Faston terminals 2.8x0.8 mm suitable plug-in socket XAP8 contact material AgNi
AZ2
Georg Schlegel GmbH & Co. KG - 88525 Dürmentingen - +49 (0) 73 71 / 502-0 - Fax: +49 (0) 73 71 / 502 49 -
[email protected] - www.schlegel.biz
Contact Blocks
Faston terminals 2.8x0.8 mm
Illustration
Description
3/6 mm
Type
Contact Block, momentary 2NC + 2NO Faston terminals 2.8x0.8 mm suitable plug-in socket XAP8 contact material
6 mm
AgNi
AZ2N
Contact Block, momentary 1 NO early make + 1 NC late break Faston terminals 2.8x0.8 mm suitable plug-in socket XAP8
3/6 mm
snapped on actuator, off position
without actuator
with actuator
contact material
AgNi
AZVN
contact material
AgNi, gold-plated
AZVN_AU
Momentary Contact Block for Emergency Stops, with failure switch-off *) 2NC + 1NO Faston terminals 2.8x0.8 mm *) 1 NC, 1 NO and 1 safety circuit, consisting of 1 NC for emergency stop connected in series with 1 NO, which is always closed during operation but opens automatically once the actuator and contact block are separated from each other. suitable plug-in socket XAP8 contact material AgNi
Plug-in Socket with 10 pins
AZOSOI
XAP10
Georg Schlegel GmbH & Co. KG - 88525 Dürmentingen - +49 (0) 73 71 / 502-0 - Fax: +49 (0) 73 71 / 502 49 -
[email protected] - www.schlegel.biz
471
Contact Blocks Faston terminals 2.8x0.8 mm
3/6 mm
Illustration
Description
Type
Momentary Contact Block for Emergency Stops with failure switch-off *) 2NC Faston terminals 2.8x0.8 mm *) 2 safety circuits, consisting of 1 NC for emergency stop connected in series with 1 NO, which is always closed during operation but opens automatically once the actuator and contact block are separated from each other. suitable plug-in socket XAP8 contact material
472
AgNi
AZSOSO
Plug-in Socket with 4 pins
XAP4
Plug-in Socket with 8 pins
XAP8
Socket, finger-protected acc. to BGV4 for simultaneous connection of all terminals of a contact block (A.../B... series), accepts up to 10 Faston clamps FH2,8
XA
Georg Schlegel GmbH & Co. KG - 88525 Dürmentingen - +49 (0) 73 71 / 502-0 - Fax: +49 (0) 73 71 / 502 49 -
[email protected] - www.schlegel.biz
Accessories for Contact blocks
Illustration
Description
Type
Insulating Case for Faston clamp FH2,8, slip on from the front
IH2,8
Faston Clamp 2.8 x 0.8 mm with snap-in pin Cross section 0.75 - 1.50 mm², brass, with pin to snapfit into the socket XA, XAL and the insulating case IH2.8
FH2,8
Protective Cover finger-protected acc. to BGV4, for contact blocks of the A.../B...series. Mount the cover before wiring.
XAI
Double Faston for the connection of 2 Faston clamps FH2.8
FD2,8
Georg Schlegel GmbH & Co. KG - 88525 Dürmentingen - +49 (0) 73 71 / 502-0 - Fax: +49 (0) 73 71 / 502 49 -
[email protected] - www.schlegel.biz
473