Azalea Wrapped Bangle
TOOLS scissors jewelry clippers (or just a pair of old scissors if you'd like) MATERIALS rhinestone chain magenta ribbon vintage brass bangle
Azalea Wrapped Bangle
1
Gather your materials, a pair of scissors, and jewelry clippers. If you don’t have a pair of jewelry clippers a pair of old scissors will work as well.
3
Tie a very loose knot around the bangle.
FOR THE MAKERS | FIRST BLOOM COLLECTION
2
Before you begin wrapping the ribbon, reserve about a foot for tying a bow a bit later.
4
Slide the rhinestone chain into the channel in the bangle and tighten the knot so that it’s right in between the first and second stones. PAGE 1 of 3
5
Begin wrapping the long ribbon around the bangle. You’re goal here is to cover as much of the interior of the bangle with the ribbon without obscuring the crystal stones. Scrunch the ribbon into the open space as you pull it away from you.
7
Wrap your way around the entire bangle, securing the crystal chain to the bangle.
9
Cover any remaining brass bangle showing.
FOR THE MAKERS | FIRST BLOOM COLLECTION
6
Flatten the ribbon as you pull it towards you.
8
Once you’ve made it all the way around the bangle snip any excess chain.
10
Tie the remaining ribbon and the foot of reserved ribbon in a tight knot. PAGE 2 of 3
11
For an added touch of romance tie a small bow.
12
Trim any excess ribbon.
13
Gather you tools and materials. You'll just need a pair of scissors.
FOR THE MAKERS | FIRST BLOOM COLLECTION
PAGE 3 of 3
Azalea Wrapped Bangle
1
Gather your materials, a pair of scissors, and jewelry clippers. If you don’t have a pair of jewelry clippers a pair of old scissors will work as well.
3
Tie a very loose knot around the bangle.
FOR THE MAKERS | FIRST BLOOM COLLECTION
2
Before you begin wrapping the ribbon, reserve about a foot for tying a bow a bit later.
4
Slide the rhinestone chain into the channel in the bangle and tighten the knot so that it’s right in between the first and second stones. PAGE 1 of 3
5
Begin wrapping the long ribbon around the bangle. You’re goal here is to cover as much of the interior of the bangle with the ribbon without obscuring the crystal stones. Scrunch the ribbon into the open space as you pull it away from you.
7
Wrap your way around the entire bangle, securing the crystal chain to the bangle.
9
Cover any remaining brass bangle showing.
FOR THE MAKERS | FIRST BLOOM COLLECTION
6
Flatten the ribbon as you pull it towards you.
8
Once you’ve made it all the way around the bangle snip any excess chain.
10
Tie the remaining ribbon and the foot of reserved ribbon in a tight knot. PAGE 2 of 3
11
For an added touch of romance tie a small bow.
12
Trim any excess ribbon.
13
Gather you tools and materials. You'll just need a pair of scissors.
FOR THE MAKERS | FIRST BLOOM COLLECTION
PAGE 3 of 3
