Bandit Bid Specifications - Model 2590 Track
SPECIFICATIONS BANDIT MODEL 2590 TRACK (22" DRUM STYLE) WHOLE TREE CHIPPER
SPECIFICATION Capacity: 22"
Measurements
Throat Opening: 26 1/4" x 30" Feed Rate: 115 FPM with a 5/8" chip Noise Level: 80 decibels at 50' (360 degrees around)
Dimensions
Length: 24' 1" to pan and 31' 4" to loader overhang Width: 143" Height: 139" Weight: 69,000 pounds approximate
Track Specs
Caterpillar Track Model: Caterpillar 320L steel track undercarrige Track Shoes: Double Grouser Track Length: 174.4" long (143.5" track on ground) Track Shoe Width: 600 MM (23 5/8") Foot Print Per Sqaure Inch: 3,390.19 pounds per square inch Track Rollers: 7 per side Track Speed: 1.39 to 2.28 MPH
Ground Pressure: 9.07 pounds per square inch with cab and loader option Track Drive: Planetary Gear Ratio: 49.82:1 Maximum Tractive Effort: 43,937 pounds
Engine
Options: 525 HP tier 4 final, 768 HP tier 2 diesel engines Clutch: Hydraulic fluid clutch Mount: (2) adjustable mounts are provided to secure belt tension Drive: (2) banded 5VF Kevlar belts Auto Feed: Standard
Optional Loader Loader Style: Heavy-duty knuckle boom loader with turntable bearing Curbside Swing: 45 degrees Roadside Swing: 85 degrees Lifting Capacity @ Full Reach: 2,500 pounds Lifting Capacity @ 6': 3,750 pounds Reach From End of Infeed 195" approximate (W/O Conveyor): Reach From End of Infeed (W/ 154" approximate Conveyor): Pulling Power: 4,250 pounds Grapple Design: Double cylinder Grapple Rotator: 4535 Rotobec grapple rotator (6 ton capacity) Jaws Open To: 35" Total Grapple Rotation: 360 degrees Total Loader Rotation: 130 degrees
Optional Cab Cab Dimension: 64 1/2" tall x 46 1/2" wide x 60 1/4" long Cab Features: Insulated cab with ceiling mounted air conditioning / heating system, lockable rear door, windshield wiper, and defroster fan Cab Gauges / Controls: Auto feed tach, fuel sight gauge, GEM 2610 display panel with pre-programmed engine software, engine warning lights, engine throttle control, and engine key switch Seat: Deluxe swivel seat with hydraulic or electronic joystick controls built into the arm rests (Customer to specify controls, Note: electronic joysticks will allow for easier control of loader functions and reduce the number of hydraulic components) Controls: Controls in the operator's cab include: track drive functions, discharge control functions, and feed system control functions Windows: 40 sqaure feet of window space constructed of scratch resistant 3/8" lexan. Lights: (4) work lights are provided on the front of the cab for enhanced operator viewing in darker conditions
Chassis Frame: Mainframe is made from 1/4" X 4" X 12" rectangular tubing with a 1/2" X 4" X 12" tongue with fish plating on sides
Remote Option Functions: Radio remote control with tether back-up comes equipped on all track units ordered WITHOUT cab and loader. Remotes will contol the chipper feed system, discharge swivel, and track drive functions, along with engine e-stop
Electrical Battery: (2) 1,400 CCA batteries
Feed System Type: Slide Box Yoke Slides: 1/2" thick steel and come with (4) 2" X 2" X 24" replaceable "Ryertex" plastic wear strips Feed Rollers: (2) horizontal Top Feed Roller Dimensions: 36" wide x 27" diameter with replaceable shaft Bottom Feed Roller 36" wide x 10 5/8" diameter with replaceable shaft Dimensions: Feed Wheel End Caps: Toothed to eliminate wrapping around shafts Sharpened Scraper Bar: Constructed of T1 material and is mounted behind bottom feed wheel to reduce wrapping
Feed Wheel Shafts: 3" Feed Wheel Drive: Chain driven (#120 chain) along with hydraulic motors Number of Hydraulic Motors: 3 Displacement: Top feed wheel features (2) 63.9 CID hydraulic motors, and bottom feed wheel features (1) 24.7 CID hydraulic motor plugged into a 5 to 1 gearbox that drives infeed conveyor Torque at System Pressure: Bottom feed wheel develops 26,552 in/lbs of torque, and top feed wheel develops 56,138 in/lbs of torque. Hydraulic Down Pressure: No Hyd.--2,420 pounds W/Hyd.--7,040 Pounds (engine @ idle) W/Hyd.--7,100 Pounds (engine @ Full Rpm) Infeed Conveyor: Heavy-duty infeed with 30" weld on tray (Unit can be ordered with an optional 5 1/2' long slat-style infeed conveyor) Hydraulic Lift Cylinder: (2) 2" x 24" hydraulic lift cylinders
Cutting System Style: Drum Style Dimensions: 37" diameter x 30" wide Drum End Caps: To be bolt on for easy access to inside of drum head if needed Knife Holders: Heavy-duty (replaceable) knife holders. Holders must extend through the end caps for added support RPM'S: 1,120 Knife Pockets: 6 Knives: 5/8" thick X 5 1/2" wide X 10" long Knife Style: Bolt-on Anvil: Constructed of AR material and is 3/4” thick x 6-1/2" wide x 30” long (4-sided) Anvil Adjustment: (2) 5/8” adjuster bolts for secure clearance to chipper knives Adjustable Side Vents: Includes one adjustable vent on each side of the drum housing allowing the amount of air flow to be regulated Chipper Shaft: 6" diameter chipper shaft with tapered bushing Chipper Bearings: (2) 5” bore, 4-bolt Pillow Block, greasable and easily replaceable bearings. Chipper Hood: Must be constructed of 3/8" steel and fold back for easy access to drum. Hood is held in place with 1/2" bolts and is secured with (1) 1" diameter removable locking pin.
Construction Chipper Base (right): 3/8" Chipper Base (left): 3/8" Belly Band: 1/2" (2-piece) AR400 Right Throat Side: 1/2" (T1 material) Left Throat Side: 1/2" (T1 material) Throat Bottom: 1/2" (T1 material) Drum Skin: 1" Chipper Hood: 3/8"
Hydraulic System Type: Open Center Filtration: 10 Micron return, 100 micron suction Pump: Parker (gear style) Hydraulic Hoses: 1/2" & 5/8" single and double braid
Discharge
Style: Stationary discharge with replaceable top constructed of AR steel Deflector: Up/down and side to side hydraulic chip deflector Clean-out: (2) bottom clean-out doors
Fuel Tank Capacity: 130 gallon (Lockable) steel fuel tank with aluminum sight gauge, magnetic drain plug, and is rubber shock mounted.
Hydraulic Tank Capacity: 200 gallon (Lockable) steel hydraulic tank with mesh screen strainer on suction line, magnetic drain plug, rubber shock mounted, and aluminum sight gauge
Paint Paint: Bandit Yellow, Alert Orange, Caterpillar Yellow, White, Green & Black
Miscellaneous Air Compressor: Optional Tool Box: Aluminum tool box Battery Box: Steel battery box
IMAGE
* Bandit Industries, Inc. reserves the right to modify any and all specifications as it see fit, without notice.
SPECIFICATION Capacity: 22"
Measurements
Throat Opening: 26 1/4" x 30" Feed Rate: 115 FPM with a 5/8" chip Noise Level: 80 decibels at 50' (360 degrees around)
Dimensions
Length: 24' 1" to pan and 31' 4" to loader overhang Width: 143" Height: 139" Weight: 69,000 pounds approximate
Track Specs
Caterpillar Track Model: Caterpillar 320L steel track undercarrige Track Shoes: Double Grouser Track Length: 174.4" long (143.5" track on ground) Track Shoe Width: 600 MM (23 5/8") Foot Print Per Sqaure Inch: 3,390.19 pounds per square inch Track Rollers: 7 per side Track Speed: 1.39 to 2.28 MPH
Ground Pressure: 9.07 pounds per square inch with cab and loader option Track Drive: Planetary Gear Ratio: 49.82:1 Maximum Tractive Effort: 43,937 pounds
Engine
Options: 525 HP tier 4 final, 768 HP tier 2 diesel engines Clutch: Hydraulic fluid clutch Mount: (2) adjustable mounts are provided to secure belt tension Drive: (2) banded 5VF Kevlar belts Auto Feed: Standard
Optional Loader Loader Style: Heavy-duty knuckle boom loader with turntable bearing Curbside Swing: 45 degrees Roadside Swing: 85 degrees Lifting Capacity @ Full Reach: 2,500 pounds Lifting Capacity @ 6': 3,750 pounds Reach From End of Infeed 195" approximate (W/O Conveyor): Reach From End of Infeed (W/ 154" approximate Conveyor): Pulling Power: 4,250 pounds Grapple Design: Double cylinder Grapple Rotator: 4535 Rotobec grapple rotator (6 ton capacity) Jaws Open To: 35" Total Grapple Rotation: 360 degrees Total Loader Rotation: 130 degrees
Optional Cab Cab Dimension: 64 1/2" tall x 46 1/2" wide x 60 1/4" long Cab Features: Insulated cab with ceiling mounted air conditioning / heating system, lockable rear door, windshield wiper, and defroster fan Cab Gauges / Controls: Auto feed tach, fuel sight gauge, GEM 2610 display panel with pre-programmed engine software, engine warning lights, engine throttle control, and engine key switch Seat: Deluxe swivel seat with hydraulic or electronic joystick controls built into the arm rests (Customer to specify controls, Note: electronic joysticks will allow for easier control of loader functions and reduce the number of hydraulic components) Controls: Controls in the operator's cab include: track drive functions, discharge control functions, and feed system control functions Windows: 40 sqaure feet of window space constructed of scratch resistant 3/8" lexan. Lights: (4) work lights are provided on the front of the cab for enhanced operator viewing in darker conditions
Chassis Frame: Mainframe is made from 1/4" X 4" X 12" rectangular tubing with a 1/2" X 4" X 12" tongue with fish plating on sides
Remote Option Functions: Radio remote control with tether back-up comes equipped on all track units ordered WITHOUT cab and loader. Remotes will contol the chipper feed system, discharge swivel, and track drive functions, along with engine e-stop
Electrical Battery: (2) 1,400 CCA batteries
Feed System Type: Slide Box Yoke Slides: 1/2" thick steel and come with (4) 2" X 2" X 24" replaceable "Ryertex" plastic wear strips Feed Rollers: (2) horizontal Top Feed Roller Dimensions: 36" wide x 27" diameter with replaceable shaft Bottom Feed Roller 36" wide x 10 5/8" diameter with replaceable shaft Dimensions: Feed Wheel End Caps: Toothed to eliminate wrapping around shafts Sharpened Scraper Bar: Constructed of T1 material and is mounted behind bottom feed wheel to reduce wrapping
Feed Wheel Shafts: 3" Feed Wheel Drive: Chain driven (#120 chain) along with hydraulic motors Number of Hydraulic Motors: 3 Displacement: Top feed wheel features (2) 63.9 CID hydraulic motors, and bottom feed wheel features (1) 24.7 CID hydraulic motor plugged into a 5 to 1 gearbox that drives infeed conveyor Torque at System Pressure: Bottom feed wheel develops 26,552 in/lbs of torque, and top feed wheel develops 56,138 in/lbs of torque. Hydraulic Down Pressure: No Hyd.--2,420 pounds W/Hyd.--7,040 Pounds (engine @ idle) W/Hyd.--7,100 Pounds (engine @ Full Rpm) Infeed Conveyor: Heavy-duty infeed with 30" weld on tray (Unit can be ordered with an optional 5 1/2' long slat-style infeed conveyor) Hydraulic Lift Cylinder: (2) 2" x 24" hydraulic lift cylinders
Cutting System Style: Drum Style Dimensions: 37" diameter x 30" wide Drum End Caps: To be bolt on for easy access to inside of drum head if needed Knife Holders: Heavy-duty (replaceable) knife holders. Holders must extend through the end caps for added support RPM'S: 1,120 Knife Pockets: 6 Knives: 5/8" thick X 5 1/2" wide X 10" long Knife Style: Bolt-on Anvil: Constructed of AR material and is 3/4” thick x 6-1/2" wide x 30” long (4-sided) Anvil Adjustment: (2) 5/8” adjuster bolts for secure clearance to chipper knives Adjustable Side Vents: Includes one adjustable vent on each side of the drum housing allowing the amount of air flow to be regulated Chipper Shaft: 6" diameter chipper shaft with tapered bushing Chipper Bearings: (2) 5” bore, 4-bolt Pillow Block, greasable and easily replaceable bearings. Chipper Hood: Must be constructed of 3/8" steel and fold back for easy access to drum. Hood is held in place with 1/2" bolts and is secured with (1) 1" diameter removable locking pin.
Construction Chipper Base (right): 3/8" Chipper Base (left): 3/8" Belly Band: 1/2" (2-piece) AR400 Right Throat Side: 1/2" (T1 material) Left Throat Side: 1/2" (T1 material) Throat Bottom: 1/2" (T1 material) Drum Skin: 1" Chipper Hood: 3/8"
Hydraulic System Type: Open Center Filtration: 10 Micron return, 100 micron suction Pump: Parker (gear style) Hydraulic Hoses: 1/2" & 5/8" single and double braid
Discharge
Style: Stationary discharge with replaceable top constructed of AR steel Deflector: Up/down and side to side hydraulic chip deflector Clean-out: (2) bottom clean-out doors
Fuel Tank Capacity: 130 gallon (Lockable) steel fuel tank with aluminum sight gauge, magnetic drain plug, and is rubber shock mounted.
Hydraulic Tank Capacity: 200 gallon (Lockable) steel hydraulic tank with mesh screen strainer on suction line, magnetic drain plug, rubber shock mounted, and aluminum sight gauge
Paint Paint: Bandit Yellow, Alert Orange, Caterpillar Yellow, White, Green & Black
Miscellaneous Air Compressor: Optional Tool Box: Aluminum tool box Battery Box: Steel battery box
IMAGE
* Bandit Industries, Inc. reserves the right to modify any and all specifications as it see fit, without notice.
