Bandit Bid Specifications - Model 65XP PTO Trailerized Unit
SPECIFICATIONS BANDIT MODEL 65XP PTO TRAILERIZED UNIT (6" DISC STYLE) PTO BRUSH BANDIT
SPECIFICATION Capacity: 6"
Measurements
Throat Opening: 6" X 12" Feed Rate: 80 FPM (1/4" Chip) Noise Level: 80 Decibels at 50 feet Length (with infeed tray 8' 4" closed):
Dimensions
Length (with infeed tray open): 10' 10" Width: 4' 7" Height: 8' Weight: 1,900 pounds
Engine
Options: Recommended 20-45 HP (540-1000 RPM)
Chassis
Frame: Main Frame is 3/16 x 2 x 4 rectangular tubing with a 3/16 x 3 x 4 tongue Tires: 20.5 x 8 x 10, load range "D" tires Fenders: Not Included Hitch: 2" Ball Tongue Jack: 2,000 pound tongue jack with foot pad Top Feed Wheel Jack Mount: Standard
PTO Options
Drive Shaft: 1-3/8" diameter (keyed) "fatigue proof" steel drive jack shaft Drive System: Drive is set for 540 RPM tractor PTO (Note 1,000 RPM drive is optional Suggested Tractor 20 to 45 horsepower Horsepower: Type: Pivoting Down Pressure Springs: (2) Feed Wheels: (1) Horizontal
Feed System
Feed Wheel Dimensions: 10-5/8" diameter x 11-1/2 wide Feed Wheel Shafts: 2" Feed Wheel End Caps: Toothed to eliminate wrapping around shafts Number of Hydraulic Motors: 1 Displacement: 24 CID Torque at System Pressure: 7,680 in/lbs @2,000 psi Attachment: Tapered fit coupling system Infeed Hopper Dimensions: 29" high x 42" Infeed Thickness: 10 gauge Infeed Tray: 30" fold down infeed tray. Also includes a safety control bar located on 3 sides of infeed hopper to allow actuation of feedwheels forward/neutral/reverse. The control bar is supported by (2) 1" threaded rods. Feed Roller to End of Infeed 66" Table: Infeed Slope: 3 degrees
Cutting System Style: Disc Dimensions: 26" diameter x 3/4" thick RPM: 1950 (approximate) Knife Pockets: (2) Knives: (2) 1/2" x 4" x 7-1/4" dual edge Knife Bolts: (3) 1/2" grade 8 bolts (per knife) Thrower: (2) 3" x 4" x 12-1/4" (cupped) Anvil: 3 bolt, 4 sided anvil (1/2" x 3" x 6") Chipper Shaft: 2" diameter (welded assembly) Chipper Bearings: (2) 2" flange mounted greasable bearings (spherical roller type on the anvil side) Chipper Hood: Must fold back to access knives and disc
Construction Chipper Base (Front): 1/4" Chipper Base (Back): 1/4" Belly Band: 3/16" Right Throat Side: 3/8" Left Throat Side: 3/8" Throat Bottom: 1/4
Hydraulic System Type: Open Center Filtration: 3 micron return, 100 micron suction Pump: gear type Relief Pressure: 2,000 PSI Hydraulic Hoses: 1/2" & 5/8 single and double braid Hydraulic Hose Burst 12,000 PSI Pressure:
Discharge Swivel: 360 degree manual swivel discharge (tool-less) Deflector: 12" adjustable chip deflector (4 adjustments are provided)
Hand Crank Swivel Discharge: optional Hand Crank Height Discharge: optional
Hydraulic Tank Capacity: 6 gallon Mount: rubber shock mounted Magnetic Drain Plug: included Rochester Sight Gauge: optional Lockable Filler Caps: optional
Safety Features Safety Features: Guards covering all moving parts Disc lock bar Wooden pusher paddle Mechanical spring lock (2) last chance pull cables Safety control bar * Bandit Industries, Inc. reserves the right to modify any and all specifications as it see fit, without notice.
SPECIFICATION Capacity: 6"
Measurements
Throat Opening: 6" X 12" Feed Rate: 80 FPM (1/4" Chip) Noise Level: 80 Decibels at 50 feet Length (with infeed tray 8' 4" closed):
Dimensions
Length (with infeed tray open): 10' 10" Width: 4' 7" Height: 8' Weight: 1,900 pounds
Engine
Options: Recommended 20-45 HP (540-1000 RPM)
Chassis
Frame: Main Frame is 3/16 x 2 x 4 rectangular tubing with a 3/16 x 3 x 4 tongue Tires: 20.5 x 8 x 10, load range "D" tires Fenders: Not Included Hitch: 2" Ball Tongue Jack: 2,000 pound tongue jack with foot pad Top Feed Wheel Jack Mount: Standard
PTO Options
Drive Shaft: 1-3/8" diameter (keyed) "fatigue proof" steel drive jack shaft Drive System: Drive is set for 540 RPM tractor PTO (Note 1,000 RPM drive is optional Suggested Tractor 20 to 45 horsepower Horsepower: Type: Pivoting Down Pressure Springs: (2) Feed Wheels: (1) Horizontal
Feed System
Feed Wheel Dimensions: 10-5/8" diameter x 11-1/2 wide Feed Wheel Shafts: 2" Feed Wheel End Caps: Toothed to eliminate wrapping around shafts Number of Hydraulic Motors: 1 Displacement: 24 CID Torque at System Pressure: 7,680 in/lbs @2,000 psi Attachment: Tapered fit coupling system Infeed Hopper Dimensions: 29" high x 42" Infeed Thickness: 10 gauge Infeed Tray: 30" fold down infeed tray. Also includes a safety control bar located on 3 sides of infeed hopper to allow actuation of feedwheels forward/neutral/reverse. The control bar is supported by (2) 1" threaded rods. Feed Roller to End of Infeed 66" Table: Infeed Slope: 3 degrees
Cutting System Style: Disc Dimensions: 26" diameter x 3/4" thick RPM: 1950 (approximate) Knife Pockets: (2) Knives: (2) 1/2" x 4" x 7-1/4" dual edge Knife Bolts: (3) 1/2" grade 8 bolts (per knife) Thrower: (2) 3" x 4" x 12-1/4" (cupped) Anvil: 3 bolt, 4 sided anvil (1/2" x 3" x 6") Chipper Shaft: 2" diameter (welded assembly) Chipper Bearings: (2) 2" flange mounted greasable bearings (spherical roller type on the anvil side) Chipper Hood: Must fold back to access knives and disc
Construction Chipper Base (Front): 1/4" Chipper Base (Back): 1/4" Belly Band: 3/16" Right Throat Side: 3/8" Left Throat Side: 3/8" Throat Bottom: 1/4
Hydraulic System Type: Open Center Filtration: 3 micron return, 100 micron suction Pump: gear type Relief Pressure: 2,000 PSI Hydraulic Hoses: 1/2" & 5/8 single and double braid Hydraulic Hose Burst 12,000 PSI Pressure:
Discharge Swivel: 360 degree manual swivel discharge (tool-less) Deflector: 12" adjustable chip deflector (4 adjustments are provided)
Hand Crank Swivel Discharge: optional Hand Crank Height Discharge: optional
Hydraulic Tank Capacity: 6 gallon Mount: rubber shock mounted Magnetic Drain Plug: included Rochester Sight Gauge: optional Lockable Filler Caps: optional
Safety Features Safety Features: Guards covering all moving parts Disc lock bar Wooden pusher paddle Mechanical spring lock (2) last chance pull cables Safety control bar * Bandit Industries, Inc. reserves the right to modify any and all specifications as it see fit, without notice.
