Bandit Bid Specifications - Model 75XP Track
SPECIFICATIONS BANDIT MODEL 75XP TRACK (7" DISC-STYLE) BRUSH BANDIT
SPECIFICATION Capacity: 7"
Measurements
Throat Opening: 7-1/2" Feed Rate: 80 FPM (1/4" chip) Noise Level: 80 decibels at 50 feet Length (with infeed tray 11' 9" closed):
Dimensions
Length (with infeed tray open): 14' 3" Width: 6' 6" Height: 8' 0" Weight: 5,500 pounds (approximate)
Engine
Options: 44.2 HP tier 4i, 56 HP tier 4 final, 49.4 tier 4i diesel engines Mount: (2) adjustable mounts are provided to secure belt tension Drive: Banded belt drive system with clutch Reversing auto feed control Optional system:
Chassis
Frame: Main Frame is made from 3/16 X 2 X 4 rectangular tubing with carbody track undercarriage. Top Feed Wheel Jack Mount: Main Frame is made from 3/16 X 2 X 4 rectangular tubing with carbody track undercarriage.
Track
Caterpillar Track Model: 303CR rubber track undercarriage Track Shoe Width: 300 MM Track Shoes: Rubber Track Length: 87.4" Track Foot Print Width: 11.81" Track Rollers: 4 per side Track Speed: 1.66 - 2.91 MPH Ground Clearance: 14-1/4"
Ground Pressure: 3.6 pounds per square inch Track Drive: Planetary Gear Ratio: 48.8:1 Maximum Tractive Effort: 8,696 pounds
Radio Remote Control Features: Comes equipped with wireless radio remote control with tether back-up
Electrical Battery: 12 volt, Interstate 530 CCA battery
Feed System Type: Pivoting Down Pressure Springs: (2) adjustable stable springs Yoke Sides: 3/8" plate steel Feed Wheels: (1) horizontal Feed Wheel Dimensions: 10 5/8" diameter x 11 1/2" wide Feed Wheel Teeth: 5 knife edge and 5 serrated Feed Wheel End Caps: Toothed to eliminate wrapping around shafts Number of Hydraulic Motors: 1 Displacement: 24 CID Torque at System Pressure: 7,680 in/lbs @ 2000 PSI Attachment: Tapered fit coupling system Infeed Hopper Dimensions: 29" high x 42" Infeed Thickness: 10 gauge Infeed Tray: 30" folding infeed tray (includes a safety control bar located on three sides of infeed hopper) Feed Roller to End of Infeed 66" Table: Infeed Slope: 3 degrees
Cutting System Style: Disc with Cantilever Design Dimensions: 26" diameter x 3/4" thick RPM: 1950 RPM (approximate) Knife Pockets: 2 Knives: (2) 1/2" x 4" x 8 3/8" dual edge Knife Bolts: (3) 5/8" grade 8 bolts Thrower: (2) 3" x 4" x 12 1/4" (cupped) Anvil: 3 bolt, 4 sided anvil (1/2" x 3" x 7") Chipper Shaft: 3-1/2" diameter chipper shaft at hub held in place by 2-3/4" shaft lock nut Chipper Bearings: Flange mounted greasable bearings (1) 2" roller bearing and (1) 2-15/16 spherical roller on anvil side Chipper Hood: Must fold back, to access knives and disc
Construction Chipper Base (Front): 1/4" Chipper Base (Back): 1/4" Belly Band: 3/16"
Right Throat Side: 3/8" Left Throat Side: 3/8" Throat Bottom: 1/4" Chipper Hood: 10 gauge
Hydraulic System Type: Open Center Filtration: 3 Micron return, 100 micron suction Pump: Gear style Relief Pressure: 2,000 PSI Feed / 3500 PSI Tracks Hydraulic Hoses: 1/2" & 5/8" single and double braid Hydraulic Hose Burst 12,000 PSI Pressure:
Discharge Swivel: 360 degree manual swivel discharge (tool-less) Deflector: 12" adjustable chip deflector (4 adjustments are provided) Hand Crank Swivel Discharge: Optional Hand Crank Height Discharge: Optional
Fuel Tank Capacity: 35 gallons (rubber shock mounted) Magnetic Drain Plug: Included
Hydraulic Tank Capacity: 23 gallons (rubber shock mounted) Magnetic Drain Plug: Included
Paint Colors: Choose from: Bandit yellow, Caterpillar yellow, Alert orange, green, black, or white
Battery / Tool Boxes Battery Box: Plastic battery box Tool Box: Optional
Safety Features Safety Features: Guards covering all moving parts Chipper hood engine disable plug Disc lock bar Wooden pusher paddle Mechanical spring lock pin for hood pin (2) Last chance pull cables (Patented) Safety Control bar
IMAGE
* Bandit Industries, Inc. reserves the right to modify any and all specifications as it see fit, without notice.
SPECIFICATION Capacity: 7"
Measurements
Throat Opening: 7-1/2" Feed Rate: 80 FPM (1/4" chip) Noise Level: 80 decibels at 50 feet Length (with infeed tray 11' 9" closed):
Dimensions
Length (with infeed tray open): 14' 3" Width: 6' 6" Height: 8' 0" Weight: 5,500 pounds (approximate)
Engine
Options: 44.2 HP tier 4i, 56 HP tier 4 final, 49.4 tier 4i diesel engines Mount: (2) adjustable mounts are provided to secure belt tension Drive: Banded belt drive system with clutch Reversing auto feed control Optional system:
Chassis
Frame: Main Frame is made from 3/16 X 2 X 4 rectangular tubing with carbody track undercarriage. Top Feed Wheel Jack Mount: Main Frame is made from 3/16 X 2 X 4 rectangular tubing with carbody track undercarriage.
Track
Caterpillar Track Model: 303CR rubber track undercarriage Track Shoe Width: 300 MM Track Shoes: Rubber Track Length: 87.4" Track Foot Print Width: 11.81" Track Rollers: 4 per side Track Speed: 1.66 - 2.91 MPH Ground Clearance: 14-1/4"
Ground Pressure: 3.6 pounds per square inch Track Drive: Planetary Gear Ratio: 48.8:1 Maximum Tractive Effort: 8,696 pounds
Radio Remote Control Features: Comes equipped with wireless radio remote control with tether back-up
Electrical Battery: 12 volt, Interstate 530 CCA battery
Feed System Type: Pivoting Down Pressure Springs: (2) adjustable stable springs Yoke Sides: 3/8" plate steel Feed Wheels: (1) horizontal Feed Wheel Dimensions: 10 5/8" diameter x 11 1/2" wide Feed Wheel Teeth: 5 knife edge and 5 serrated Feed Wheel End Caps: Toothed to eliminate wrapping around shafts Number of Hydraulic Motors: 1 Displacement: 24 CID Torque at System Pressure: 7,680 in/lbs @ 2000 PSI Attachment: Tapered fit coupling system Infeed Hopper Dimensions: 29" high x 42" Infeed Thickness: 10 gauge Infeed Tray: 30" folding infeed tray (includes a safety control bar located on three sides of infeed hopper) Feed Roller to End of Infeed 66" Table: Infeed Slope: 3 degrees
Cutting System Style: Disc with Cantilever Design Dimensions: 26" diameter x 3/4" thick RPM: 1950 RPM (approximate) Knife Pockets: 2 Knives: (2) 1/2" x 4" x 8 3/8" dual edge Knife Bolts: (3) 5/8" grade 8 bolts Thrower: (2) 3" x 4" x 12 1/4" (cupped) Anvil: 3 bolt, 4 sided anvil (1/2" x 3" x 7") Chipper Shaft: 3-1/2" diameter chipper shaft at hub held in place by 2-3/4" shaft lock nut Chipper Bearings: Flange mounted greasable bearings (1) 2" roller bearing and (1) 2-15/16 spherical roller on anvil side Chipper Hood: Must fold back, to access knives and disc
Construction Chipper Base (Front): 1/4" Chipper Base (Back): 1/4" Belly Band: 3/16"
Right Throat Side: 3/8" Left Throat Side: 3/8" Throat Bottom: 1/4" Chipper Hood: 10 gauge
Hydraulic System Type: Open Center Filtration: 3 Micron return, 100 micron suction Pump: Gear style Relief Pressure: 2,000 PSI Feed / 3500 PSI Tracks Hydraulic Hoses: 1/2" & 5/8" single and double braid Hydraulic Hose Burst 12,000 PSI Pressure:
Discharge Swivel: 360 degree manual swivel discharge (tool-less) Deflector: 12" adjustable chip deflector (4 adjustments are provided) Hand Crank Swivel Discharge: Optional Hand Crank Height Discharge: Optional
Fuel Tank Capacity: 35 gallons (rubber shock mounted) Magnetic Drain Plug: Included
Hydraulic Tank Capacity: 23 gallons (rubber shock mounted) Magnetic Drain Plug: Included
Paint Colors: Choose from: Bandit yellow, Caterpillar yellow, Alert orange, green, black, or white
Battery / Tool Boxes Battery Box: Plastic battery box Tool Box: Optional
Safety Features Safety Features: Guards covering all moving parts Chipper hood engine disable plug Disc lock bar Wooden pusher paddle Mechanical spring lock pin for hood pin (2) Last chance pull cables (Patented) Safety Control bar
IMAGE
* Bandit Industries, Inc. reserves the right to modify any and all specifications as it see fit, without notice.
