Bandit Bid Specifications - Model 95XP PTO Trailerized Unit
SPECIFICATIONS BANDIT MODEL 95XP PTO TRAILERIZED UNIT (9" DISC STYLE) PTO BRUSH BANDIT
SPECIFICATION Capacity: 9"
Measurements
Throat Opening: 9" x 17" Feed Rate: 90FPM producing a 3/8" Chip Noise Level: 80 Decibels at 50' (360 degrees around) Length (with infeed tray 9'7" closed):
Dimensions
Length (with infeed tray open): 12' 1" Width: 5' 5" Height: 8' 6" Weight: 2,800 pounds
Engine
Options: Recommended 30-60 HP (540-1000 RPM)
Chassis
Frame: Main is 3/16 x 2 x 4 rectangular tubing with a 1/4 x 3 x 4 tongue Tires: P185R14 Load Range "D" mounted on 5 bolt white spoke rim. Fenders: Not Included Hitch: 2" Ball hitch Tongue Jack: 5,000 pound "bulldog" tongue jack, adjustable for height with 15" travel. Top Feed Wheel Jack Mount: Standard (Note: if hydraulic lift cylinder is ordered jack mount is not included)
PTO Options
Drive Shaft: 2-1/4 to 1-1/2 diameter (keyed) "fatigue proof" steel jackshaft (Note: drive shaft to connect unit to tractor is not included) Drive System: Drive for 540 RPM tractor PTO (Note: 1,000 RPM drive is available as an option) Suggested Tractor 30 to 60 horseppower Horsepower:
Feed System
Type: Hinged yoke assembly. Yoke will ppivot from front of chipper base on (2) 1" flanged roller bearings. Yoke sides are constructed of 3/8" plate steel.
Down Pressure Springs: (2) 17" long adjustable down pressure swings Feed Wheels: (1) Horizontal Feed Wheel Dimensions: 17" wide x 10-5/8" diameter feed wheel with (8) 1" high knife edge teeth. Feed Wheel Shafts: 2" Feed Wheel End Caps: Tooth t eliminate wrapping around shafts Number of Hydraulic Motors: (1) Displacement: 32.3 CID Torque at System Pressure: 10,336 in/lbs Attachment: Tapered fit coupling system Infeed Hopper Dimensions: 29" High x 45" wide Infeed Thickness: 3/16" thick Infeed Tray: 30" fold down infeed tray. Also includes a safety control bar
Cutting System Style: Disc Style Dimensions: 34" diameter x 1" thick with 1" backer and 1" hub RPM: 1350 Knife Pockets: (2), each pocket holds one knife Knives: (2) 9/16" thick x 3-5/8" wide x 10-1/8" long Thrower: (2) disc fan blades 4" x 4" x 9". These blades assist with throwing chips. Anvil: (4-sided) 3/4" thick x 4" x 8-7/8" Chipper Shaft: 4" diameter chipper shaft at hub, held in place by a 3/4" thick x 7-1/2" diameter steel lock ring and (4) 5/8" grade 8 hardness bolts Chipper Bearings: (2) 2-7/16" bore, 4-bolt flange mount, greasable and easily replaceable bearings. Chipper Hood: Chipper hood to be constructed of 10 gauge steel and fold back for easy access to disc. Transition half of hood to be constructed of 3/16" material. Hood is held in place with (1) 1" diameter locking pin.
Construction Chipper Base (Front): 1/2" Chipper Base (Back): 1/4" Belly Band: 3/16"` Right Throat Side: 3/8 Left Throat Side: 3/8 Throat Bottom: 1/4"
Hydraulic System Type: Open Center Filtration: 3 Micron return, 100 micron suction Pump: Gear style Pump GPM: 6.0 Relief Pressure: 2,000 PSI Hydraulic Hoses: 1/2" & 5/8" single and double braid Hydraulic Hose Burst 12,000 PSI Pressure:
Discharge Swivel: 360 degree manual swivel Deflector: 3 position manual chip deflector
Hand Crank Swivel Discharge: Optional Hand Crank Height Discharge: Optional
Hydraulic Tank Capacity: 7.4 gallon steel hydraulic tank Mount: Rubber shock mounted Magnetic Drain Plug: Standard Rochester Sight Gauge: Optional Lockable Filler Caps: Optional
Safety Features Safety Features: Safety Features: Guards covering all Moving Parts Disc Lock Bar Wooden Pusher Paddle Mechanical Spring Lock Pin for Hood Pin (2) Last Chance pull Cables (Patented) Safety Control Bar * Bandit Industries, Inc. reserves the right to modify any and all specifications as it see fit, without notice.
SPECIFICATION Capacity: 9"
Measurements
Throat Opening: 9" x 17" Feed Rate: 90FPM producing a 3/8" Chip Noise Level: 80 Decibels at 50' (360 degrees around) Length (with infeed tray 9'7" closed):
Dimensions
Length (with infeed tray open): 12' 1" Width: 5' 5" Height: 8' 6" Weight: 2,800 pounds
Engine
Options: Recommended 30-60 HP (540-1000 RPM)
Chassis
Frame: Main is 3/16 x 2 x 4 rectangular tubing with a 1/4 x 3 x 4 tongue Tires: P185R14 Load Range "D" mounted on 5 bolt white spoke rim. Fenders: Not Included Hitch: 2" Ball hitch Tongue Jack: 5,000 pound "bulldog" tongue jack, adjustable for height with 15" travel. Top Feed Wheel Jack Mount: Standard (Note: if hydraulic lift cylinder is ordered jack mount is not included)
PTO Options
Drive Shaft: 2-1/4 to 1-1/2 diameter (keyed) "fatigue proof" steel jackshaft (Note: drive shaft to connect unit to tractor is not included) Drive System: Drive for 540 RPM tractor PTO (Note: 1,000 RPM drive is available as an option) Suggested Tractor 30 to 60 horseppower Horsepower:
Feed System
Type: Hinged yoke assembly. Yoke will ppivot from front of chipper base on (2) 1" flanged roller bearings. Yoke sides are constructed of 3/8" plate steel.
Down Pressure Springs: (2) 17" long adjustable down pressure swings Feed Wheels: (1) Horizontal Feed Wheel Dimensions: 17" wide x 10-5/8" diameter feed wheel with (8) 1" high knife edge teeth. Feed Wheel Shafts: 2" Feed Wheel End Caps: Tooth t eliminate wrapping around shafts Number of Hydraulic Motors: (1) Displacement: 32.3 CID Torque at System Pressure: 10,336 in/lbs Attachment: Tapered fit coupling system Infeed Hopper Dimensions: 29" High x 45" wide Infeed Thickness: 3/16" thick Infeed Tray: 30" fold down infeed tray. Also includes a safety control bar
Cutting System Style: Disc Style Dimensions: 34" diameter x 1" thick with 1" backer and 1" hub RPM: 1350 Knife Pockets: (2), each pocket holds one knife Knives: (2) 9/16" thick x 3-5/8" wide x 10-1/8" long Thrower: (2) disc fan blades 4" x 4" x 9". These blades assist with throwing chips. Anvil: (4-sided) 3/4" thick x 4" x 8-7/8" Chipper Shaft: 4" diameter chipper shaft at hub, held in place by a 3/4" thick x 7-1/2" diameter steel lock ring and (4) 5/8" grade 8 hardness bolts Chipper Bearings: (2) 2-7/16" bore, 4-bolt flange mount, greasable and easily replaceable bearings. Chipper Hood: Chipper hood to be constructed of 10 gauge steel and fold back for easy access to disc. Transition half of hood to be constructed of 3/16" material. Hood is held in place with (1) 1" diameter locking pin.
Construction Chipper Base (Front): 1/2" Chipper Base (Back): 1/4" Belly Band: 3/16"` Right Throat Side: 3/8 Left Throat Side: 3/8 Throat Bottom: 1/4"
Hydraulic System Type: Open Center Filtration: 3 Micron return, 100 micron suction Pump: Gear style Pump GPM: 6.0 Relief Pressure: 2,000 PSI Hydraulic Hoses: 1/2" & 5/8" single and double braid Hydraulic Hose Burst 12,000 PSI Pressure:
Discharge Swivel: 360 degree manual swivel Deflector: 3 position manual chip deflector
Hand Crank Swivel Discharge: Optional Hand Crank Height Discharge: Optional
Hydraulic Tank Capacity: 7.4 gallon steel hydraulic tank Mount: Rubber shock mounted Magnetic Drain Plug: Standard Rochester Sight Gauge: Optional Lockable Filler Caps: Optional
Safety Features Safety Features: Safety Features: Guards covering all Moving Parts Disc Lock Bar Wooden Pusher Paddle Mechanical Spring Lock Pin for Hood Pin (2) Last Chance pull Cables (Patented) Safety Control Bar * Bandit Industries, Inc. reserves the right to modify any and all specifications as it see fit, without notice.
