412031.I01 PK 3/5 3/13/03 9:03 PM Page 1
Introduction/Benefits . . . . . . . . . . . . . . . . . . . . I2-I3 FAQs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I4 The System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I5 Insert Selector System . . . . . . . . . . . . . . . . . . . I6-I7 Hood and Base Housings . . . . . . . . . . . . . . . . . . I8 Using the Catalog . . . . . . . . . . . . . . . . . . . . . . . . I9 Accessory Options . . . . . . . . . . . . . . . . . . . . I10-I12 Catalog Numbering System . . . . . . . . . . . . . I13-I14 Series Locator . . . . . . . . . . . . . . . . . . . . . . . I15-I52 Engineering Reference. . . . . . . . . . . . . . . . . I54-I57 Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . I58-I70 Coding Options . . . . . . . . . . . . . . . . . . . . . . . . . I71 Cable and Conduit Entry . . . . . . . . . . . . . . . I72-I73 Fiber Optic Connections . . . . . . . . . . . . . . . . I74-I75
I
412031.I01 PK 3/5
3/20/03
3:00 PM
Page 2
Customer Benefits
Heavy Duty Multi-Circuit Rectangular Industrial Connectors
Quality Systems, Quality Parts DIN EN ISO 9001 Systems.
Approvals: DIN, IEC, VDE, UL, and CSA for world use.
Space Saving Maximum circuits in minimum space – shaped to fit panels and machines.
Quick & Easy Housing Connections Unique roller locking double lever handles.
Sealed Connections Neoprene or HT-Viton housing assembly seals to IP65 for washdown duty.
Wiring In Any System Standard NPT fittings provided, with many other cable or conduit entry options available.
Any Access Needed
T Series
Top, side and custom options, including ribbon cable.
Rough Service, Tough Duty Die cast housings with hardshell powder-coat finish.
Easy Circuit Location Hot-stamped contact positions and catalog numbers.
Performance Plus Standard (125°C) and 200°C interiors available.
Wiring Your Way Standard Screw Terminal and Crimp Terminal Inserts, with Fiber Optic and other contacts also available.
POS-E-KON, a trademark of Tyco Electronics Corporation, is used under exclusive license by Thomas & Betts Corporation. Thomas & Betts Corporation and Tyco Electronics Corporation are not otherwise affiliated.
412031.I01 PK 3/5 3/13/03 9:04 PM Page 3
Table of Contents Introduction/Benefits. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I2 FAQs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I4 The System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I5 Insert Selector System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I6 Hood and Base Housings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I8 Using the Catalog . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I9 Accessory Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I10 Catalog Numbering System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I14 Series Locator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I15 Reference and Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I53 Fiber Optic Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I74
Series
Amperage
Contacts + G
Page
@ 600VAC 10A
3/4, 10, 16, 32
I16
B
16A
6, 10, 16, 24, 32, 48
I18
C
35A
6, 12
I22
D
10A
7/8, 15, 25, 40, 50, 64, 80, 128
I24
DD
10A
24, 42, 72, 108, 144, 216
28
K
16A/80A
8 + 4, 16 + 8
I32
V
16A
3, 6, 10, 16, 20, 26, 32 (all +2)
I34
T
16A/200°C
6, 10, 16, 24 (200°C)
I38
M
spec
Modular
I41
© 2002 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
I Pos-E-Kon ™
A
I3
412031.I01 PK 3/5 3/13/03 9:04 PM Page 4
Table of Contents The FAQs About POS-E-KON™ The Most Frequently Asked Questionsand Answers-for POS-E-KON Customers
International Standards, Worldwide Use
Why?
Who?
Rectangular Circuit Interconnections
Pos-E-Kon ™
I
• Best use of space for multiple contacts in heavy duty housings. • Easy to assemble with many different insert options. • Best fit for easy access in panels, machinery, and enclosures. • Sealed connector with quick disconnect handles. • Wide variety of circuit possibilities from standard items. • Solid or stranded wire in fixed or portable use.
What?
• Machine tool OEMs. • Material handling equipment OEMs. • Robotics systems OEMs and installations. • Packaging machinery OEMs and facilities. • Control panels and PLC systems. • Molding, assembly, or line machinery OEMs and facilities. • Construction, mining, and welding apparatus. • Carnival applications.
Where?
• Servo controls. • Sensing and feedback loops. • Conveyor and process controls. • Low power, DC, or logic systems. • Combination power, system, and other circuits. • Modular controls including fiber-optics connections.
Worldwide agency approvals and applications • DIN VDE 0627/86, 0110/02.79, and 01101/04.97. • IEC 60.664-1, DIN/IEC 512. • UL recognized (E215386) and CSA certified • Protection classes IP44 through IP65 per IEC 529. • Component use in CE marked equipment OK per IEC Council Directive July 1999, 73/23/EEC.
How? • Available from Thomas & Betts – POS-E-KON authorized distributors. • T&B sales representatives and agents worldwide. For For For For For
I4
U.S. Customer Service and Order Inquiries: Phone 800-816-7809, Fax 800-816-7810. International Service and Order Inquiries: Phone (U.S.) 901-252-5400, Fax 901-252-1330. U.S. Technical Services: Phone 888-862-3289, Fax 901-252-1321. International Technical Services: Phone (U.S.) 901-252-5000, enter 1, 6672. Canadian Customer Service and Order Inquiries: Phone 450-347-5318, Fax 450-347-1976.
© 2002 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412031.I01 PK 3/5 3/13/03 9:04 PM Page 5
The System The Basic System: Build an Application Step Step Step Step
1: 2: 3: 4:
– – – –
Maximum Voltage and amperage requirements (300V or 600V classes, 10-80 amps). Number of contacts or circuits needed. Choose wire terminations style; screw terminal or crimp contacts. Select series from charts. Base (or Coupler) and Hood construction/mating selection per series (single or double levers). CABLE ENTRY FITTING
HOOD
As Easy As 1. 2. 3. 4. 1. Hood: • Separable housing for inserts. • Top or side conduit/wire entry. • Standard locking posts, dual or single. • Locks to Panel Base, Box Base or inline Coupler Hood
2. Base Housing (or Coupler Hood): • • • •
MALE INSERT
Surface wall mount box base (shown). Panel Base for through-panel access. Coupler Hood mating for portable use. Single or dual “Lever” locking.
I Pos-E-Kon ™
3. Male Insert • Male contact carrier body. • Screw terminal contacts (pins with wire protection saddles) or crimp terminated pins. FEMALE INSERT
4. Female Insert • Female contact carrier. • Screw terminal contacts (sleeves with wire protection saddles) or crimp terminated sleeves.
BASE (OR COUPLER HOOD)
CABLE ENTRY WITH FITTING
DIN Standard Configurations • Most inserts and housings are interface compatible with other DIN standard lines. Verify physical application before selecting cross reference. • Pos-E-Kon construction includes standard NPT conduit adapters for hoods and bases, with many options available. DIN standard Hoods and Bases may have “Euro Style” PG fittings (or none) included unless specially ordered.
© 2002 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
I5
412031.I01 PK 3/5 3/13/03 9:04 PM Page 6
Pos-E-Kon Insert Selector Chart S C F A
– – – –
Screw Terminals Crimp Contacts Fiber Optic (POF) Terminal Block Wiring Adapter
Select the # of contacts – all inserts have separate ground contacts AMPS VOLTS Series
3
4
S
S
6
10
50
D
10
600
A
16
600
A
16
600
B
S, C, A
35
600
C
S
10
600
D
10
600
DD
80/16
600
K
16-T
600
T
16-V
600
V
Modular 600
M
7
8
10
12
15
16
20
24
25
26
32
40
42
48
50-216
C, F
S, C
S, C
S, C, A
S, C, A
S, C S, C, A
S, C
S, C
S C, F
C, F
C, F
C, F, A
C, F S
S, C
S
C, F, A (64) C, F
C, F
4 or 8 Power (80A alone or with 8 or 16 Control (16A) Combination Inserts
S
S
S
S, C
S, C
S, C
S
High Temp (200 C)
S, C
S, C
S, C
Includes 2 Pilot Contacts
Configure to individual specs. Options: Fiber Optic, Power and Control Pin selections in sectional inserts. Contact Technical Services for Information.
Pos-E-Kon ™
I Screw Terminal / Insert Types (Integral Contacts)
10 - 16A A, B, V, T
35A C
16 - 80A K
10A D & DD
16A A&B
5-50A M
50 Amp M3
Stamped 16A M 4/5.1
20 Amp M5
Screw termination is used for ease of assembly, some heavier gauge wires plus ease of maintenance. No tooling beyond a screwdriver and wire strippers is required.
Crimp Terminal / Insert Types (Crimp Contacts) Crimp terminals offer solid, thermally cool vibration resistant terminations for OEM equipment and critical applications. Better for smaller AWG sizes also. Crimp tools are noted in each section.
16A A&B
10A D & DD
POF D &M
Signal 1.5 A M-CoAx
5 Amp M20
• All crimp types represented require contacts ordered separately. • Each section contains hand crimp tool selection notes.
NEW
I6
Thermocouple compensated contacts (crimp) also available (Fe and Cu) for A & B series inserts. Contact Technical Services.
© 2002 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412031.I01 PK 3/5 3/13/03 9:04 PM Page 7
Insert Selection Screw Terminal Inserts
Crimp Terminal Inserts
• Integral screw terminal contacts provide for easy terminal wiring, fast assembly. • Standard wire protection saddles prevent cutting of strands during assembly.
• Provides reliable connections for long-term configurations. • Contact sizes accommodate wiring from 12 20 AWG.
• Made of durable glass fiber-filled thermoplastic. • Contact numbers clearly marked for easy identification. • Easily installed (male or female) in either hoods or bases using captive mounting screws.
I Pos-E-Kon ™
Terminal Block Wiring Adapters WAR, Right Ground Strap WAL, Left Ground Strap • Allows for measuring of circuit while in operation. • Provide easy connections in panel mounting configurations. • Labels available for easy identification of circuits. • Can be mounted on DIN rails by using snap-on mount feet. • Used in switch cabinets, panel enclosures or mounted in panel base housings – see B and D series.
WAM1 Marker Tab Clips Snap-in formed label holder tabs allow terminal identification for B Series. DIN Mounting Foot FE807TB
Insert Strip Blank – WAM1B Insert Strip Nos. 1-64 – WAM1N64 Insert Strip Letters A-Z – WAM1AZ
© 2002 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
I7
412031.I01 PK 3/5 3/13/03 9:04 PM Page 8
Hood and Base Housings • Rugged cast aluminum hoods and bases: Maximum performance in many operating conditions. • Various hood heights available: Easier assembly and wiring with low, high and standard profiles. • Corrosion resistant finishes: Optional special materials extend life in corrosive conditions. • Locking possibilities include single locking system and double locking system. • Complete selection: Flexible product designs (see Hood/Base Size Cross Reference Chart below). • Dust Covers and More: See Adapters, Pgs. I11-I12 and Covers Pg. I10 (or Bases w/Covers) available in most series (Accessories pg. I68 ) see pgs. I69-I70 for all Adapter Plates. • Custom Configurations: Multiple conduit entry/sizes and other configurations available to spec.
Cross Reference Series Application A4
VOLTS
Series
10A
50
D
D8
10A
600
A
A3, A4
I
16A
600
A
16A
600
B
Pos-E-Kon ™
AMPS
Standard Hood/Base Housings
35A
600
C
10A
600
D
10A
600
DD
80/16A
600
K
ModularM
600
M
Series Application ■
16A-T
600
T
16A-V*
600
V
A10
A10
A16
A16
A32
B6
B10
B16
B24
B10
B16
B24
B32
D40
D64
D80
D128
DD72
DD108
DD144
DD216
C6 D15
D25
B48
A32 B6
D7
B32
D50 DD24
DD42
C12
K4/8 M, B6
M, B10
M, B16
B48
M, B24
K8/16 M, B16
I N S E R T S
M, B24
Special Series Hood/Base Housings T6
T10
T16
T24
V3
V6
V10
V32
* Special isolation design allows additional control circuit capability. ■ Special high temperature series in Cu-Free Aluminum with special green epoxy powder-coat, Viton® seals.† † Viton® is a trademark of DuPont Dow Elastomers.
Box Base
Panel Base
I8
Top Cable Entry
Side Cable Entry
Box Base Housing w/Single lever and spring cover. New: metal spring covers now available for B series, where noted.
© 2002 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412031.I01 PK 3/5 3/13/03 9:04 PM Page 9
Using the Catalog: Series Layout 1. Select size (# of contacts) from each series’ section left hand page chart (selected inserts), then look at corresponding right hand page columns. 2. Vertical columns note single or double locking systems available (double locking usually preferable). 3. Select base housings for mounting and/or function: conduit/cable entry, thru-panel access, inline coupler or reversed locking as shown. (Note profile height options.) 4. Select side or top entry hoods as shown. (Note profile height options.) 5. Review conduit and cable entry options (standard NPT adapter sizes for each series). Note: M Series (layout) groups interior options, followed by base selection options. Each Right Hand Page Shows:
STANDARD BASES
BASE TO HOOD
STANDARD HOODS HOOD TO COUPLER
COUPLER HOODS
Reverse Locking LEVER HOODS HOOD TO BASE
POST BASES
© 2002 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
I9
Pos-E-Kon ™
Portable Service
I
412031.I01 PK 3/5 3/13/03 9:04 PM Page 10
Accessories Sub-Miniature (DB) Adapter Plates • Connect test and diagnostic equipment to control circuits. • Panel base, box housing base, or any hood installation (ribbon cable – entry hoods available). • Industry standard sizes. • Dust covers for protection recommended. • 9, 15, 25, 37 and 50 series. See page I69 for ordering information and dimensions.
B24 Insert Mounting Adapter Plates • Allows housing standardization for multiple applications. • B24 footprint fit to single B6, B10, B16 inserts. • Rugged thermoplastic. • Fits standard B24 Hoods and Bases.
Cover Plates
I Pos-E-Kon ™
• Allows custom connections for drill-and-install work. • Blank plate for expansion. • All standard Hood/Base sizes supported. See page I70 for ordering information and dimensions.
Dust Covers & Hinged Covers (thermoplastic)
(thermoplastic or metal)
• Single or Double locking options by series. • Separate covers or fixed mount hinged types. • New metal fixed mount hinged covers for B series bases now available in select sizes. • Separate or fixed covers protect contacts when not in use or while unmated.
I 10
© 2002 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412031.I01 PK 3/5 3/13/03 9:04 PM Page 11
Accessories Wire and Cable Entry Options Portable Service Cord
Cable Compression Seal Fitting
Strain Relief Trumpet Gland
• Sheathed industrial multi-conductor cables usage. • Options cover many installation needs. • Special constructions available for retrofit or original specification. • Hoods and Bases may be specified (in bulk volumes) without fittings for customer cable entry selection. • Euro standard gland seal also available.
Euro Gland Seal
Ribbon or Flat Cable Sealing
Hood Seal Set
Standard NPT Conduit Adapters • Euro PG to NPT thread adapters (PG male to NPT female). • Standard on all Pos-E-Kon Hoods and Bases. • Available separately for MRO. • Sizes from (PG11 to 1/2 inch) through (PG48 to 1-1/2 inch) NPT.
Cord Grip Fittings • Both NPT and PG thread styles. • New thermoplastic sealing glands in NPT, PG and new ISO threads – for retrofit or original specification. • More options than shown are available. See T&B catalogs. (Shown in Gray. Black also available.)
© 2002 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
I 11
I Pos-E-Kon ™
Box Base Series Set
• Single, double or triple cable entry options. • Hoods must be specified as ribbon cable entry style. • Sealing sets available separately. • Box base housing sealing sets also available.
412031.I01 PK 3/5 3/13/03 9:04 PM Page 12
Accessories Electro-Magnetic Shielding Component Systems Shielding Kits • EM shielding at critical sealing lines. • Hood/Base and Coupler Hood kits. • Special EM Hood-Base entry fittings also available. (see page I72)
Assembly Structure Example Rectangular connectors
Pos-E-Kon ™
I
A10, D15 A16, D25 B6, T6, DD24 B10, T10, V3, DD42 B16, T16, C6, V6, D40, DD72 B24, T24, V10, V16, D64, DD108
Base & Hood Kit
Coupler Hood Kit
EM-Fitting
EM650A10 EM651A16 EM646B6 EM647B10 EM648B16 EM649B24
EM656A10 EM657A16 EM652B6 EM653B10 EM654B16 EM655B24
see page H73
Shield absorption
Inserts/Series
Frequency
F (MHz)
Bulkhead/Panel Pass-Through Adapters • For panel wiring access through panel base entry. • Clamshell “Split Type” design also available. • 3 or 4 entry (4 standard). • Base B16 or B24 sizes. • Grommets sold separately, see chart below Adapter Housing and Base Series No. B16, T16, C6, V6, D40, DD72 (3 hole) B24, T24, V10, V16, D64, DD108 (4 hole)
Adapter
Panel Base
CA628B16 CA629B24
PB116 PB124
Feed-thru Grommets
Straight Grommet
Blind Plug
I 12
Cable O.D. (mm)
Cat. No.
Cable O.D. (mm)
Cat. No.
3-4 4-5 5-6 6-7 7-8 8-9 9-10 –
BSG630 BSG631 BSG632 BSG633 BSG634 BSG635 BSG636 BPG644
10-11 11-12 12-13 13-14 14-15 15-16
BCG637 BCG638 BCG639 BCG640 BCG641 BCG642
Split Type Grommet
* Use T&B Ty-Rap® No. TYV523M cable tie to bind wire to open face grommet.
© 2002 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412031.I01 PK 3/5 3/13/03 9:04 PM Page 13
2001 Important Notes Pos-E-Kon Improvements for 2001 Introducing: New Ergonomic thermoplastic levers for “B” series double lever housings B10-B24 Benefits: Non-slip comfortable grip Easier locking and unlocking And: New Laser etched labeling for all metal housings and hot-stamped labeling on contact carrier inserts. Benefits: Permanent marking with all data combined External marking vs. internal label
I Pos-E-Kon ™
New “E” type levers will be standard for double lever B10 through B24 size housings. All single lever housings are constructed with metallic levers.
Metallic levers will continue to be available for all double lever housings. (Minimum order requirements)
Reference: Catalog Number Conversion • Add “E” suffix for Ergonomic style levers for all B10, 16 and 24 double-lever housings. Example: PB116 (Metal levers) becomes PB116E (Thermoplastic levers) LH224 (Metal levers) becomes LH224E (Thermoplastic levers) Catalog Numbers affected (New catalog number construction shown in catalog) B10 Series PB110 BB010 BB110 BB610 BB710 CH810
B16 Series PB116 BB016 BB116 BB616 BB716 CH616
B24 Series LH016 LH016H LH116H LH216 LH216H
PB124 BB024 BB124
CH624 CH724 LH124 LH224 LH024 LH324
Note: Product improvements phased in during 2001 shipments
© 2002 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
I 13
412031.I01 PK 3/5 3/13/03 9:04 PM Page 14
Catalog Number System Easy to use - catalog number construction pioneered by T&B:
Hoods TH – Top Entry Hood w/NPT fitting SH – Side Entry Hood w/NPT fitting
Wiring Entry options Double posts (front/back) for Double Lever locking. (single side posts/lever also)
Male and Female Terminal Block Wiring Adapters
Male and Female Inserts -same installation to any hood or base orientation
MS or FSxxxWAR/WAL (right/left ground) options for Panel Base installations.
MS – Male Screw Terminal Insert. (shown) FS – Female Screw Terminal Insert. (shown) – OR – MC – Male Crimp Insert FC – Female Crimp Insert >use MP –Male and FP –Female Pins
Pos-E-Kon ™
I
Cord or Conduit Adapter fittings Ribbon cable & Euro cable entry Housings without fittings Custom assemblies
Base Types PB – Panel Base Housing Panel face or bulkhead mounting with rear wiring access
CH – Coupler Hood BB – Box Base Housing Inline Portable Connection Surface Mount with NPT conduit Entry (1 or 2) fittings (standard)
Locking • • • •
I 14
Single lever/Single posts or Double lever/Double posts locking. “Reversed Locking” (levers on hoods) available. New E-series ergonomic thermoplastic handles for Double lever B series (B10, B16, B24). Single lever & other series use metal levers.
© 2002 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412031.I01 PK 3/5 3/13/03 9:05 PM Page 15
Series Locator Series
A Series: 10A: 3, 4 16A: All other
B Series: 16A
C Series: 35A
D Series: 10A
Features
Contacts + G
Page
Small, Compact Size Screw Terminal or Crimp Contacts
3, 4, 10, 16, 32
I16
Standard Size Screw Terminal or Crimp Contacts
6, 10, 16, 24, 32, 48
I18
High Current Screw Terminal
6 or 12
I22
Hi-Density Crimp Contacts or Fiber Optic Contacts
7, 8, 15, 25, 40, 50, 64, 80, 128
I24
I DD Series:
K Series: 16A/80A
V Series: 16A
T Series: 16A
M Series: (Various)
Reference & Accessories
Very Hi-Density Crimp Contacts or Fiber Optic Contacts
24, 42, 72, 108, 144, 216
I28
Combo, Hi-Current/Std. Current Screw Terminals
16A: 8 + 4 80A: 16 + 8
I32
Control Circuit Contacts and B Style Screw Terminals
3, 6, 10, 16, 20, 26, 32
B Style @ Hi-Temp 200°C Screw Terminals
6, 10, 16, 24
I38
All Modular Crimp Contacts and Fiber Optic Contacts
Several to 50A: 3, 5, 7 Piece Frames
I41
Specs, Dimensions, Components and Fiber Optics
© 2002 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
Pos-E-Kon ™
10A
) +2
I34
I53
I 15
412031.I01 PK 3/5 3/13/03 9:05 PM Page 16
A Series
16 Amps 600 Vac
3 or 4 Contacts + Ground: 10A 10, 16 & 32 Contacts + Ground: 16A
3 or 4 (300V)
10
16
32
3 or 4 + G
10 + G
16 + G
32 + G
Male – Pins 20-14 AWG (0.5-2.5 mm2)
MS203A or MS204A (16 AWG max)
MS210A
MS216A
MS216A+ MS232A
Female – Sleeves 20-14 AWG (0.5-2.5 mm2)
FS103A or FS104A (16 AWG max)
FS110A
FS116A
FS116A+ FS132A
10 + G
16 + G
32 + G
Male Insert (Order contacts below)
MC410A
MC416A
MC416A+ MC432A
Female Insert (Order contacts below)
FC310A
FC316A
FC316A+ FC332A
Install to Matching Series Hood/Base
Screw Terminal Inserts
Crimp Terminal Inserts
Pos-E-Kon ™
I
Use small blade screwdriver to push wire entry tab in for EZ contact removal.
WT611TB
For all Crimp Terminal “A” Inserts:
Contacts Selection
Crimp Tool
Crimp Contacts
2
Wire AWG (mm )
Identification
Female
Male
20 AWG (0.5 mm )
No Groove
FP2000
MP2000
18 AWG (0.75-1 mm2)
1 Groove
FP1800
MP1800
16 AWG (1.5 mm )
2 Grooves
FP1600
MP1600
14 AWG (2.5 mm2)
3 Grooves
FP1400
MP1400
No Groove
FP1200
MP1200
2
Groove
2
2
12 AWG (4.0 mm )
For all Inserts
DIN Rail Adapter Mount Frames
10 + G
16 + G
AMF115
AMF125
Allows use of “open” interiors as separable barrier terminal blocks for panel assemblies – or can be used as OEM wiring assembly fixture.
150MM long, with base for snapping onto DIN rail
I 16
© 2002 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412031.I01 PK 3/5 3/13/03 9:05 PM Page 17
16 Amps 600 Vac
A Series
# of Contacts + Ground Connection
3 or 4 (300V) Single Lever
Double Lever
Bases – Standard Mount
16
32
Lever Locking Type Single
Single
Single
Double
Panel Base
PB303A(P)▲
PB310A
PB316A
PB132A
w/Cover
PB403A
PB410A
PB416A
Angled no Cover
PB503A(P)▲
Housing
Box Base (no Cover)
Box Base w/Cover
Hoods – Standard Mount
NPT Entry
10
1 X 3/8" 1 X 1/2" 1 X 3/4" 1 X 1" 2 X 1/2" 2 X 3/4" 2 X 1"
BB403A(P)▲ BB410A
BB416A BB032A BB832A
BB510A
B A S E B A S E
BB516A BB132A BB132A100
1 X 1/2" 2 X 1/2
BB610A BB710A
T O
BB616A BB716A
H O O D
*Plastic body – “A” 3-16 Series standard Hoods include Gaskets: Bases and Special Hoods do not.
Side Entry
SH603A(P)▲
1 X 3/8" 1 X 1/2" 1 X 3/4" 1 X 1"
TH803A(P)▲
SH610A** SH710A**
TH810A** TH910A**
SH616A** SH716A**
TH816A** TH916A**
SH032A SH132A
Coupler Hoods mate to Standard Hoods ONLY. Top Entry
1 X 3/8" 1 X 1/2"
CH803A(P)▲ CH810A
CH816A
I H O O D T O
TH232A TH332A
For Inline, Portable or Special Service Connections Coupler Hoods – Inline
H O O D S
C O U P L E R
C O U P L E R
Reverse Locking
Lever Hoods – Rev. Lock
Lever Hoods mate to Post Bases ONLY. Side Entry w/Lever(s)
1 X 3/4" 1 X 1"
LH032A LH132A
Top Entry w/Lever(s)
1 X 3/4" 1 X 1"
LH232A LH332A
Panel Base+ Posts w/Cover Box Base+ Posts w/Cover
PB232A BB232A BB232A100 BB332A BB332A100
1 X 3/4" 1 X 1" 2 X 3/4" 2 X 1"
O D T O
Post Bases accept Lever Hoods ONLY.
Bases – with Access Cover
H O O D H S O
B
B A A S S E E S
**Notes: Available in Standard or LOW Profile “L” configurations. (-add suffix) ▲ (P) indicates glass-filled thermoplastic construction, light gray color (add suffix). (PB) indicates glass filled thermoplastic construction, black color (add suffix) qty. purchase may be required.
© 2002 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
I 17
Pos-E-Kon ™
Top Entry
1 X 3/8" 1 X 1/2" 1 X 3/4" 1 X 1"
412031.I01 PK 3/5 3/13/03 9:05 PM Page 18
B Series
16 Amps 600 Vac
6, 10, 16, 24, 32, 48 Contacts + Ground
6
10
16
6+G
10 + G
16 + G
Male – Pins 20-14 AWG (0.5-2.5 mm2)
MS206B
MS210B
MS216B
Female – Sleeves 20-14 AWG (0.5-2.5 mm2)
FS106B
FS110B
FS116B
6+G
10 + G
16 + G
Male Insert, Ground L. 20-14 AWG (0.5-2.5 mm2)
MS206WAL
MS210WAL
MS216WAL
Male Insert, Ground R. 20-14 AWG (0.5-2.5 mm2)
MS206WAR
MS210WAR
MS216WAR
Female Insert, Ground L. 20-14 AWG (0.5-2.5 mm2)
FS106WAL
FS110WAL
FS116WAL
Female Insert, Ground R. 20-14 AWG (0.5-2.5 mm2)
FS106WAR
FS110WAR
FS116WAR
Foot Element mounting adapter for DIN rail
FE807TB 2 each needed
FE807TB 2 each needed
FE807TB 2 each needed
6+G
10 + G
16 + G
Male Insert (Order contacts below)
MC406B
MC410B
MC416B
Female Insert (Order contacts below)
FC306B
FC310B
FC316B
Install to Matching Series Hood/Base
Screw Terminal Inserts
Wiring Adapter Insert for use with Panel Bases; allows single access direction panel-build wiring + easy terminal ID for service & testing. Catalog No.
Label Insert Clip Strip blank Strip Nos. 1-64 Strip Letters A - Z
WAM-1 WAM1B WAM1N64 WAM1AZ
Pos-E-Kon ™
I
Accessories:
Screw Terminal Wiring Adapter Blocks
Crimp Terminal Inserts
Use small blade screwdriver to push wire entry tab in for EZ contact removal.
Crimp Tool WT611TB
For all Crimp Terminal “B” Inserts
Contacts Selection Crimp Contacts
Wire AWG (mm2)
Identification
Female
Male
No Groove
FP2000
MP2000
18 AWG (0.75-1 mm )
1 Groove
FP1800
MP1800
16 AWG (1.5 mm2)
2 Grooves
FP1600
MP1600
14 AWG (2.5 mm )
3 Grooves
FP1400
MP1400
12 AWG (4.0 mm2)
No Groove
FP1200
MP1200
2
20 AWG (0.5 mm ) 2
Groove
2
For all Inserts
DIN Rail Adapter Mount Frames Allows use of “open” interiors as separable barrier terminal blocks for panel assemblies – or can be used as OEM wiring assembly fixture. Accepts any Terminal Insert to same series.
I 18
6+G
10 + G
16 + G
125 mm long, with base for snapping onto DIN rail
AMF006
AMF010
AMF016
150 mm long, with base for snapping onto DIN rail
AMF106
AMF110
AMF116
150 mm long, with base for TWO inserts
AMF112
–
–
© 2002 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412031.I01 PK 3/5 3/13/03 9:05 PM Page 19
16 Amps 600 Vac
B Series
# of Contacts + Ground Connection
6 Single Lever
Double Lever
Bases – Standard Mount
NPT Entry
10
16
Lever Locking Type Single
Single
Double
Single
Double
Panel Base
PB306 ■
PB310 ■
PB110E
PB316 ■
PB116E
w/Cover
PB406 ■
PB410 ■
1 X 1/2" 1 X 3/4" 1 X 1" 2 X 1/2" 2 X 3/4" 2 X 1"
BB406 BB406H075 BB406H100 BB506 BB506H075 BB506H100
BB410 BB410H075 BB410H100 BB510 BB510H075 BB510H100
1 X 1/2" 1 X 3/4" 1 X 1" 2 X 1/2" 2 X 3/4" 2 X 1"
BB606 ■ BB606H075 ■ BB606H100 ■ BB706 ■ BB706H075 ■ BB706H100 ■
BB610 ■ BB610H075 ■ BB610H100 ■ BB710 ■ BB710H075 ■ BB710H100 ■
1 X 1/2" 1 X 3/4" 1 X 1"
SH606 SH606H075 SH606H100
SH610 SH610H075 SH610H100
SH010 SH010H075 SH010H100
SH616◆ SH716H◆
1 X 1/2" 1 X 3/4" 1 X 1"
TH806 TH806H075 TH806H100
TH810 TH810H075 TH810H100
TH210 TH210H075 TH210H100
TH816◆ TH816H100
Housing
Box Base ( no Cover )
Box Base w/Cover
PB416 ■ BB010E BB010EH075 BB010EH100 BB110E BB110EH075 BB110EH100
BB416* BB416H100
BB016E* BB016EH100
BB516* BB516H100
BB116E* BB116EH100
B A S E B A S E
BB616* ■ BB616H100 ■
T O
BB716* ■ BB716H100 ■
H O O D
Hoods – Standard Mount Side Entry
TH216◆ TH316H
For Inline, Portable or Special Service Connections Coupler Hoods mate to Standard Hoods ONLY.
Coupler Hoods – Inline Top Entry
1 X 1/2" 1 X 3/4" 1 X 1"
CH806 CH806H075 CH806H100
CH810 CH810H075 CH810H100
CH610E CH610EH075 CH610EH100
CH816H CH916H
CH616EH CH716EH
H O O D S
H O O D
C O U P L E R
C O U P L E R
T O
Reverse Locking Lever Hoods mate to Post Bases ONLY.
Lever Hoods – Reversed Lock Side Entry w/Lever(s)
1 X 1/2" 1 X 3/4" 1 X 1"
LH010E LH010EH075 LH010EH100
LH016E* LH116EH
Top Entry w/Lever(s)
1 X 1/2" 1 X 3/4" 1 X 1"
LH210E LH210EH075 LH210EH100
LH216E* LH316EH
H O O D S
T O
Post Bases accept Lever Hoods ONLY.
Bases – with Access Cover Panel + Posts w/Cover
Box + Posts w/Cover
PB210 ■ BB210 ■ BB210H075 ■ BB210H100 ■ BB310■ BB310H075 ■ BB310H100 ■
1 X 1/2" 1 X 3/4" 1 X 1" 2 X 1/2" 2 X 3/4" 2 X 1"
H O O D
PB216 ■
BB216* ■ BB216H100 ■
B A B S E
A S E S
BB316* ■ BB316H100 ■
*Notes: Available in Standard or HIGH Profile “H” configurations. (-add suffix) ■ Add “M” final suffix for metal cover option. ◆ Both HIGH (H) and LOW (L) profile also available. (-add suffix) © 2002 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
I 19
I Pos-E-Kon ™
Top Entry
SH016◆ SH116H◆
412031.I01 PK 3/5 3/13/03 9:05 PM Page 20
B Series
16 Amps 600 Vac
6, 10, 16, 24, 32, 48 Contacts + Ground
24
32
48
24 + G
32 + G
48 + G
Install to Matching Series Hood/Base
Screw Terminal Inserts Male Pins 20-14 AWG (0.5-2.5 mm2)
MS224B
MS216B (1-16) MS224B (1-24) +MS232B (17-32) +MS248B (25-48)
Female Sleeves 20-14 AWG (0.5-2.5 mm2)
FS124B
FS116B (1-16)+ FS124B (1-24)+ FS132B (17-32) FS148B (25-48)
Screw Terminal Wiring Adapter Blocks Wiring Adapter Insert for use with Panel Bases; allows single access direction panel-build wiring + easy terminal ID for service & testing. Catalog No.
Label Insert Clip Strip blank Strip Nos. 1-64 Strip Letters A - Z
WAM-1 WAM1B WAM1N64 WAM1AZ
Male Insert, Ground R. 20-14 AWG (0.5-2.5 mm2)
MS224WAL MS224WAR
Female Insert, Ground L. 20-14 AWG (0.5-2.5 mm2)
FS124WAL
Female Insert, Ground R. 20-14 AWG (0.5-2.5 mm2)
FS124WAR
Foot Element mounting adapter for DIN rail
Pos-E-Kon ™
I
Accessories:
Male Insert, Ground L. 20-14 AWG (0.5-2.5 mm2)
24 + G
Crimp Terminal Inserts
FE807TB
24 + G
32 + G
48 + G
Male Insert (Order contacts below)
MC424B
(1-16) MC416B (1-24) MC424B (17-32) MC432B (25-48) MC448B
Female Insert (Order contacts below)
FC324B
(1-16) FC316B (1-24) FC324B (17-32) FC332B (25-48) FC348B
Use small blade screwdriver to push wire entry tab in for EZ contact removal.
Crimp Tool WT611TB
For all Crimp Terminal “B” Inserts
Contacts Selection Crimp Contacts
Wire Gauge AWG (mm2) Identification
Female
Male
No Groove
FP2000
MP2000
18 AWG (0.75-1 mm )
1 Groove
FP1800
MP1800
16 AWG (1.5 mm2)
2 Grooves
FP1600
MP1600
14 AWG (2.5 mm )
3 Grooves
FP1400
MP1400
12 AWG (4.0 mm2)
No Groove
FP1200
MP1200
2
20 AWG (0.5 mm ) 2
Groove
2
For all Inserts
DIN Rail Adapter Mount Frames Allows use of “open” interiors as separable barrier terminal blocks for panel assemblies; or can be used as OEM wiring assembly fixture.
I 20
150 mm long, with base for snapping onto 33 mm rail
24 + G
AMF124
© 2002 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412031.I01 PK 3/5 3/13/03 9:05 PM Page 21
16 Amps 600 Vac
B Series
# of Contacts + Ground Connection
24 Single Lever
Double Lever
Bases – Standard Mount
32
48
Lever Locking Type
NPT Entry
Single
Double
Double
Single
Panel Base
PB324 ■
PB124E
PB132
PB348
w/Cover
PB424 ■
Housing
Box Base ( no Cover )
1 X 3/4" 1 X 1" 2 X 3/4" 2 X 1"
BB424* BB424H100 BB524* BB524H100
Box Base w/Cover
1 X 3/4" 1 X 1" 2 X 3/4" 2 X 1"
BB624* ■ BB624H100 ■ BB724* ■ BB724H100 ■
PB448 BB024E* BB024EH100 BB124E* BB124EH100
BB032
BB448
BB132
BB548
B A S E B A S E
BB648
T O
BB748
H O O D
Hoods – Standard Mount 1 X 3/4" 1 X 1" 1 X 1.25"
**SH624** **SH724**
**SH024** **SH124**
SH032 SH132 SH132-125
Top Entry
1 X 3/4" 1 X 1" 1 X 1.25" Ribbon CBL
**TH824** **TH924**
**TH224** **TH324**
TH232 TH332 TH332-125
TH624RC‡
TH424RC‡
SH648 SH748 TH848 TH948
H O O D S
T O
For Inline, Portable or Special Service Connections Coupler Hoods mate to Standard Hoods ONLY. Coupler Hoods – Inline Service Top Entry
1 X 3/4" 1 X 1" Ribbon CBL
CH824 CH924 CH824RC‡
CH624E CH724E CH724ERC‡
CH632 CH732
I H O O D
C O U P L E R
C O U P L E R
Reverse Locking Lever Hoods mate to Post Bases ONLY.
Lever Hoods – Rev. Lock Side Entry w /Lever(s)
1 X 3/4" 1 X 1"
LH024E LH124E
Top Entry w/Lever(s)
1 X 3/4" 1 X 1"
LH224E LH324E
H O O D S
T O
Post Bases accept Lever Hoods ONLY.
Bases – with Access Cover Panel Base w/Posts + Cover
Box Base w/Posts + Cover
PB224 ■ 1 X 3/4" 1 X 1" 2 X 3/4" 2 X 1"
BB224*■ BB224H100 BB324*■ BB324H100
H O O D
B A B S A E
S E S
**Notes: Available in Standard or HIGH Profile “H” configurations. (-add suffix) **Notes: Available in Standard or LOW Profile “L” configurations. (-add suffix) ■ Add “M” final suffix for metal cover option. ‡ See page I73 for ribbon cable kits.
© 2002 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
I 21
Pos-E-Kon ™
Side Entry
412031.I01 PK 3/5 3/13/03 9:05 PM Page 22
C Series
35 Amps 600 Vac
6 or 12 Contacts + Ground
6
12
6+G
12 + G
Male – Pins 20-10 AWG (0.5-2.5 mm2)
MS206C
MS206C (1-6)+ MS212C (7-12)
Female – Sleeves 20-10 AWG (0.5-2.5 mm2)
FS106C
FS106C (1-6)+ FS112C (7-12)
Install to Matching Series Hood/Base
Screw Terminal Contact Carrier Inserts
Pos-E-Kon ™
I
I 22
© 2002 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412031.I01 PK 3/5 3/13/03 9:05 PM Page 23
35 Amps 600 Vac
C Series
# of Contacts + Ground Connection
6 Single Lever
Double Lever
Bases – Standard Mount
12
Lever Locking Type
NPT Entry
Single
Double
Double
Panel Base
PB316
PB116E
PB132
w/Cover
PB416
Housing
Box Base ( no Cover )
Box Base w/Cover
1 X 3/4" 1 X 1" 2 X 3/4" 2 X 1"
BB416* BB416H100 BB516* BB516H100
BB016E* BB016EH100 BB116E* BB116EH100
BB032 BB132
B A S E B A S E
■
1 X 3/4" 1 X 1" 2 X 3/4" 2 X 1"
BB616* BB616H100 ■ BB716* ■ BB716H100 ■
T O H O O D
Hoods – Standard Mount Side Entry
1 X 3/4" 1 X 1" 1 X 1.25"
SH616◆ SH716
SH016◆ SH116H
SH032 SH132 SH132-125
Top Entry
1 X 3/4" 1 X 1" 1 X 1.25"
TH816◆ TH816H100
TH216◆ TH316H
TH232 TH332 TH332-125
Coupler Hoods mate to Standard Hoods ONLY.
Coupler Hoods – Inline Top Entry
1 X 3/4" 1 X 1"
CH816H CH916H
CH616EH CH716EH
CH632 CH732
H O O D T O
C O U P L E R
C O U P L E R
Reverse Locking Lever Hoods mate to Post Bases ONLY.
Lever Hoods – Rev. Lock Side Entry w/Lever(s)
1 X 3/4" 1 X 1"
LH016E* LH116EH
Top Entry w/Lever(s)
1 X 3/4" 1 X 1"
LH216E* LH316EH*
H O O H D O S O D T O
Post Bases accept Lever Hoods ONLY.
Bases – with Access Cover Panel + Posts w/Cover
Box + Posts w/Cover
PB216 ■ 1 X 3/4" 1 X 1" 2 X 3/4" 2 X 1"
BB216* ■ BB216H100 ■ BB316* ■ BB316H100 ■
B A S E S
B A S E
*Notes: Available in Standard or HIGH Profile “H” configurations. (-add suffix) **Notes: Available in Standard or LOW Profile “L” configurations. (-add suffix) ■ Add “M” final suffix for metal cover option. ◆ Both HIGH (H) and LOW (L) profile also available. (-add suffix)
© 2002 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
I 23
I Pos-E-Kon ™
For Inline, Portable or Special Service Connections
H O O D S
412031.I01 PK 3/5 3/13/03 9:05 PM Page 24
D Series
10 Amps 600 Vac
7 or 8, 15, 25 & 40 Contacts + Ground
7 or 8
15
25
40
7 or 8 + G
15 + G
25 + G
40 + G
Male Insert (Order contacts below)
MC407D or MC408D
MC415D
MC425D
MC440D
Female Insert (Order contacts below)
FC307D or FC308D
FC315D
FC325D
FC340D
Install to Matching Series Hood/Base
Crimp Terminal Inserts Contacts Sold Separately
Screw Terminal Wiring Adapter Block Wiring Adapter Insert for use with Panel Bases; allows single access direction panel-build wiring + easy terminal ID for service & testing. Catalog No.
Label Insert Clip Strip blank Strip Nos. 1-64 Strip Letters A - Z
WAM-1 WAM1B WAM1N64 WAM1AZ
Pos-E-Kon ™
I
Accessories:
40 + G
Male Insert, Ground L. 26 - 16 AWG (0.2-1.5mm2)
MS440WAL
Female Insert, Ground L. 26 - 16 AWG (0.2-1.5mm2)
FS340WAL
Foot Element mounting 2X per adapter for DIN rail
FE807TB (2x needed)
For Crimp Terminal “D” Inserts
Contacts Selection Chart
Crimp Tool
Crimp Contacts WT80
Extraction Tool
2
Wire Gauge AWG (mm ) 2
I.D.
RT614
Female
Male
22+ AWG (0.14-0.37 mm )
1
FP22SD
MP22SD
20 AWG (0.5 mm2)
2
FP20SD
MP20SD
18 AWG (0.75-1 mm2)
3
FP18SD
MP18SD
16 AWG (1.5 mm2)
4
FP16SD
MP16SD
5
FP14SD
MP14SD
Wire Gauge AWG (mm2)
Female
Male
Glass Fiber POF, Size 1 mm
FPF520
MPF530
2
14 AWG (2.5 mm )
See page I74 for POF installation and tools info.
Identification
Fiber Optic Contacts Crimp Contacts
For all Inserts
DIN Rail Adapter Mount Frames Allows “open” wiring inside closed panel enclosure. Allows interiors to be assembled as a separable terminal block device.
I 24
125MM long, with base for snapping onto DIN rail
15 + G
25 + G
40 + G
AMF115
AMF125
AMF016
150MM long, with base for snapping onto DIN rail
© 2002 Thomas & Betts Corporation. Specifications are subject to change without notice.
AMF116
www.tnb.com
412031.I01 PK 3/5 3/13/03 9:05 PM Page 25
D Series
10 Amps 600 Vac # of Contacts + Ground Connection
7 or 8 Single Lever
Double Lever
Bases – Standard Mount
NPT Housing Entry
15
Single
Panel Base
PB303A(P)▲
PB310A
w/Cover
PB403A
PB410A
Angled, ( no Cover )
PB503A(P)▲
Box Base ( no Cover )
Box Base w/Cover
40
Lever Locking Type Single
1 X 3/8" 1 X 1/2" 2 X 1/2" 1 X 3/4" 1 X 1" 2 X 3/4" 2 X 1" 1 X 1/2" 2 X 1/2" 1 X 3/4" 1 X 1" 2 X 3/4" 2 X 1"
25
Single
PB316A
Single
Double
PB316
PB116E
PB416
PB416A
BB403A(P)▲ BB410A BB510A
BB416A BB516A BB416* BB416H100 BB516* BB516H100
BB610A BB710A
BB016E* BB016EH100 BB116E* BB116EH100
B A S E
B A S E T O
BB616A BB716A
H O O D
BB616* ■ BB616H100 ■ BB716* ■ BB716H100 ■
Body – “A” 3-16 Series standard Hoods include Gaskets: Bases and Special Hoods do not.
Hoods – Standard Mount Side Entry
SH603A(P)▲
1 X 3/8" 1 X 1/2" 1 X 3/4" 1 X 1"
TH803A(P)▲
SH610A SH710A
SH616A SH716A
TH810A TH910A
TH816A TH916A
TH816RC, TH216RC (Ribbon Cable) SH616◆ SH716H◆
SH016◆ SH116H
TH816◆ TH816H100
TH216◆ TH316H
For Inline, Portable or Special Service Connections Coupler Hoods mate to Standard Hoods ONLY.
Coupler Hoods – Inline Top Entry
1 X 3/8" 1 X 1/2" 1 X 3/4" 1 X 1"
CH803A(P)▲ CH810A
CH816A
CH816RC, CH716ERC (Ribbon Cable) CH816H CH616EH CH916H CH716EH
I H O O D S
C O U P L E R
H O O D T O C O U P L E R
Reverse Locking
Lever Hoods – Reversed Lock
Lever Hoods mate to Post Bases ONLY. Side Entry w/Lever(s)
1 X 1/2" 1 X 3/4"
LH016E* LH116EH
Top Entry w/Lever(s)
1 X 1/2" 1 X 3/4"
LH216E* LH316EH
Panel + Posts w/Cover Box + Posts w/Cover
PB216 ■ 1 X 3/4" 1 X 1" 2 X 3/4" 2 X 1"
D T O
Post Bases accept Lever Hoods ONLY.
Bases – with Access Cover
H O O H D O S O
BB216* ■ BB216H100 ■ BB316* ■ BB316H100 ■
B
B A A S S E E S
**Notes: Available in Standard or HIGH Profile “H” configurations. (-add suffix) **Notes: Available in Standard or LOW Profile “L” configurations. (-add suffix) ▲ (P) indicates glass-filled thermoplastic construction. ■ Add “M” final suffix for metal cover option. ◆ Both HIGH (H) and LOW (L) profile also available. (-add suffix)
© 2002 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
I 25
Pos-E-Kon ™
Top Entry
1 X 3/8" 1 X 1/2" 1 X 3/4" 1 X 1"
412031.I01 PK 3/5 3/13/03 9:05 PM Page 26
D Series
10 Amps 600 Vac
50, 64, 80 & 128 Contacts + Ground
50
64
80
128
50 + G
64 + G
80 + G
128 + G
Male Insert (Order contacts below)
MC425D (2x)
MC464D
MC440D (2x)
MC464D (2x)
Female Insert (Order contacts below)
FC325D (2x)
FC364D
FC340D (2x)
FC364D (2x)
Install to Matching Series Hood/Base
Crimp Terminal Inserts
Wiring Adapter Insert for use with Panel Bases; allows single access direction panel-build wiring + easy terminal ID for service & testing. Accessories:
Catalog No.
Label Inserts Strip Blank Strip Nos. 1-64 Strip Letters A - Z
WAM-1 WAM1B WAM1N64 WAM1AZ
Screw Terminal Wiring Adapter Block
Pos-E-Kon ™
I
Crimp Tool
Male Insert, Ground L. 26 - 16 AWG (0.2-1.5mm2)
MS464WAL
Female Insert, Ground L. 26 - 16 AWG (0.2-1.5mm2)
FS364WAL
Foot Element mounting 2X per adapter for DIN rail
FE807TB (2x needed)
For Crimp Terminal “D” Inserts
Contacts Selection Chart Crimp Contacts WT80
Extraction Tool
I.D.
RT614
See page I74 for POF installation and tools info.
2
Wire Gauge AWG (mm )
Identification
Female
Male
22+ AWG (0.14-0.37 mm2)
1
FP22SD
MP22SD
20 AWG (0.5 mm2)
2
FP20SD
MP20SD
18 AWG (0.75-1 mm2)
3
FP18SD
MP18SD
16 AWG (1.5 mm2)
4
FP16SD
MP16SD
14 AWG (2.5 mm2)
5
FP14SD
MP14SD
Wire Gauge AWG (mm2)
Female
Male
Glass Fiber POF, Size 1 mm
FPF520
MPF530
Fiber Optic Contacts Crimp Contacts
DIN Rail Adapter Mount Frames Allows “open” wiring inside closed panel enclosure. Allows interiors to be assembled as a separable terminal block device.
I 26
64 + G
150MM long, with base for snapping onto DIN rail
64 + G AMF124
© 2002 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412031.I01 PK 3/5 3/13/03 9:05 PM Page 27
10 Amps 600 Vac
D Series
# of Contacts + Ground Connections
50 Single Lever
Double Lever
Bases – Standard Mount
64
80
128
Lever Locking Type
NPT Housing Entry
Double
Single
Double
Double
Single
Panel Base
PB132A
PB324
PB124E
PB132
PB348
w/Cover
PB403A
PB424
BB032A BB832A BB132A BB132A100
BB424* BB424H100 BB524* BB524H100
Box Base (no Cover)
1 X 3/4" 1 X 1" 2 X 3/4" 2 X 1"
Box Base w/Cover
1 X 3/4" 1 X 1" 2 X 3/4" 2 X 1"
BB024E* BB024EH100 BB124E* BB124EH100
BB032
BB448
BB132
BB548
BB624* ■ BB624H100 ■ BB724* ■ BB724H100 ■
B A S E
T O
BB648
H O O D
BB748
Hoods – Standard Mount Side Entry
1 X 3/4" 1 X 1" 1 X 1.25"
SH032A SH132A
SH624** SH724**
SH024** SH124**
SH032 SH132
Top Entry
1 X 3/4" 1 X 1" 1 X 1-1/4" Ribbon CBL
TH232A TH332A
TH824** TH924**
TH224** TH324**
TH232 TH332
TH624RC‡
TH424RC‡
SH648 SH748 TH848 TH948
H O O D S
For Inline, Portable or Special Service Connections
Top Entry
1 X 3/4" 1 X 1" Ribbon CBL
CH824 CH924 CH824RC‡
CH624E CH724E CH724ERC‡
CH632 CH732
C O U P L E R
H O O D T O C O U P L E R
Reverse Locking Lever Hoods mate to Post Bases ONLY.
Lever Hoods – Reversed Lock Side Entry w/Lever(s)
Top Entry w/Lever(s)
1 X 3/4" 1 X 1" 1 X 3/4" 1 X 1"
LH032A LH132A
LH024E LH124E
LH232A LH332A
LH224E LH324E
H O O D S
H O O D T O
Post Bases accept Lever Hoods ONLY.
Bases – with Access Cover Panel + Posts w/Cover
Box + Posts w/Cover
1 X 3/4" 1 X 1" 2 X 3/4" 2 X 1"
PB232A
PB224 ■
BB232A BB232A100 BB332A BB332A100
BB224*■ BB224H100 BB324*■ BB324H100
B A S E S
B A S E
**Notes: Available in Standard or HIGH Profile “H” configurations. (-add suffix) **Notes: Available in Standard or LOW Profile “L” configurations. (-add suffix) ■ Add “M” final suffix for metal cover option. ‡ See page I73 for ribbon cable kits.
© 2002 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
I 27
I Pos-E-Kon ™
Coupler Hoods mate to Standard Hoods ONLY.
Coupler Hoods – Inline
B A S E
412031.I01 PK 3/5 3/13/03 9:06 PM Page 28
DD Series
10 Amps 600 Vac
24, 42, 72 Contacts + Ground
24
42
72
24 + G
42 + G
72 + G
Male Insert (Order contacts below)
MC224DD
MC242DD
MC272DD
Female Insert (Order contacts below)
FC124DD
FC142DD
FC172DD
Install to Matching Series Hood/Base
Crimp Terminal Inserts
Crimp Tool
Crimp Contacts WT80
Extraction Tool
I
I.D.
See page I74 for POF installation and tools info.
Wire Gauge AWG (mm2)
Identification
Female
Male
22+ AWG (0.14-0.37 mm2)
1
FP22SD
MP22SD
20 AWG (0.5 mm2)
2
FP20SD
MP20SD
18 AWG (0.75-1 mm2)
3
FP18SD
MP18SD
16 AWG (1.5 mm )
4
FP16SD
MP16SD
14 AWG (2.5 mm2)
5
FP14SD
MP14SD
Wire Gauge AWG (mm2)
Female
Male
Glass Fiber POF, Size 1 mm
FPF520
MPF530
2
RT614
Pos-E-Kon ™
For all Crimp Terminal “DD” Inserts
Contacts Selection Chart
Fiber Optic Contacts Crimp Contacts
For all Inserts
DIN Rail Adapter Mount Frames Adapter Mount Frames allow “open” wiring inside closed panel enclosure. AMF also allows Inserts to be assembled as a separable Terminal Block device.
I 28
24 + G
42 + G
72 + G
150 mm long, with base for snapping onto DIN rail
AMF106
AMF110
AMF116
125 mm long style
AMF006
AMF010
AMF016
150 mm long, Double for Dual Inserts Mounting
AMF112
© 2002 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412031.I01 PK 3/5 3/13/03 9:06 PM Page 29
DD Series
10 Amps 600 Vac # of Contacts + Ground Connection
24 Single Lever
Double Lever
Bases – Standard Mount
Housing
NPT Entry
42
72
Lever Locking Type Single
Single
Double
Single
Double
Panel Base
PB306 ■
PB310 ■
PB110E
PB316
PB116E
w/Cover
PB406 ■
PB410 ■
1 X 1/2" 1 X 3/4" 1 X 1" 2 X 1/2" 2 X 3/4" 2 X 1"
BB406 BB406H075 BB406H100 BB506 BB506H075 BB506H100
BB410 BB410H075 BB410H100 BB510 BB510H075 BB510H100
1 X 1/2" 1 X 3/4" 1 X 1" 2 X 1/2" 2 X 3/4" 2 X 1"
BB606 ■ BB606H075 ■ BB606H100 ■ BB706 ■ BB706H075 ■ BB706H100 ■
BB610 ■ BB610H075 ■ BB610H100 ■ BB710 ■ BB710H075 ■ BB710H100 ■
Side Entry
1 X 1/2" 1 X 3/4" 1 X 1"
SH606 SH606H075 SH606H100
SH610 SH610H075 SH610H100
SH010 SH010H075 SH010H100
Top Entry
1 X 1/2" 1 X 3/4" 1 X 1" Ribbon CBL
TH806 TH806H075 TH806H100
TH810 TH810H075 TH810H100
TH210 TH210H075 TH210H100
Box Base (no Cover)
Box Base w/Cover
PB416 BB010E BB010EH075 BB010EH100 BB110E BB110EH075 BB110EH100
BB416* BB416H100
BB016E* BB016EH100
BB516* BB516H100
BB116E* BB116EH100
B A S B E A S E
■
BB616* BB616H100 ■
T O
BB716* ■ BB716H100 ■
H O O D
Hoods – Standard Mount SH016◆ SH116H
TH816◆ TH816H100 TH816RC‡
TH216◆ TH316H TH216RC‡
For Inline, Portable or Special Service Connections Coupler Hoods mate to Standard Hoods ONLY.
Coupler Hoods – Inline Top Entry w/Lever(s)
1 X 1/2" 1 X 3/4" 1 X 1" Ribbon CBL
CH806 CH806H075 CH806H100
CH810 CH810H075 CH810H100
CH610E CH610EH075 CH610EH100
CH816H CH916H CH816RC‡
CH616EH CH716EH CH716ERC‡
H O O D S
H O O D
I
T O
C O U P L E R
C O U P L E R
Pos-E-Kon ™
SH616◆ SH716H◆
Reverse Locking Lever Hoods mate to Post Bases ONLY.
Lever Hoods – Reversed Lock Side Entry w/Lever(s)
1 X 1/2" 1 X 3/4" 1 X 1"
LH010E LH010EH075 LH010EH100
LH016E* LH116EH
Top Entry w/Lever(s)
1 X 1/2" 1 X 3/4" 1 X 1"
LH210E LH210EH075 LH210EH100
LH216E* LH316EH
H O O H D O S O D T O
Post Bases accept Lever Hoods ONLY.
Bases – with Access Cover Panel + Posts w/Cover
Box + Posts w/Cover
PB210 ■ BB210 ■ BB210H075 ■ BB210H100 ■ BB310■ BB310H075 ■ BB310H100 ■
1 X 1/2" 1 X 3/4" 1 X 1" 2 X 1/2" 2 X 3/4" 2 X 1"
PB216 ■
■
BB216* BB216H100 ■
B A B S E
A S E S
BB316* ■ BB316H100 ■
* Notes: Available in Standard or HIGH Profile “H” configurations. (-add suffix) ■ Add “M” final suffix for metal cover option. ◆ Both HIGH (H) and LOW (L) profile also available. (-add suffix) ‡ See page I73 for ribbon cable kits.
© 2002 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
I 29
412031.I01 PK 3/5 3/13/03 9:06 PM Page 30
DD Series
10 Amps 600 Vac
108, 144 & 216 Contacts + Ground
108
144
216
108 + G
144 + G
216 + G
Male Insert (Order contacts below)
MC208DD
MC272DD+ MC244DD
MC208DD+ MC216DD
Female Insert (Order contacts below)
FC108DD
FC172DD+ FC144DD
FC108DD+ FC116DD
Install to Matching Series Hood/Base
Crimp Terminal Inserts
Crimp Contacts WT80
Extraction Tool
I
I.D.
RT614
Pos-E-Kon ™
For all Crimp Terminal “DD”Inserts
Contacts Selection
Crimp Tool
See page I74 for POF installation and tools info.
2
Wire Gauge AWG (mm )
Identification
Female
Male
22+ AWG (0.14-0.37 mm2)
1
FP22SD
MP22SD
20 AWG (0.5 mm2)
2
FP20SD
MP20SD
18 AWG (0.75-1 mm2)
3
FP18SD
MP18SD
16 AWG (1.5 mm2)
4
FP16SD
MP16SD
14 AWG (2.5 mm2)
5
FP14SD
MP14SD
Wire Gauge AWG (mm2)
Female
Male
Glass Fiber POF, Size 1 mm
FPF520
MPF530
Fiber Optic Contacts Crimp Contacts
For all Inserts
DIN Rail Adapter Mount Frames Adapter Mount Frames allow “open” wiring inside closed panel enclosure.AMF also allows Inserts to be assembled as a separable Terminal Block device.
I 30
150 mm long, with base for snapping onto DIN rail
108 + G
AMF124
© 2002 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412031.I01 PK 3/5 3/13/03 9:06 PM Page 31
10 Amps 600 Vac
DD Series
# of Contacts + Ground Connections
108 Single Lever
Double Lever
Bases – Standard Mount
Housing
144
216
Lever Locking Type
NPT Entry
Single
Double
Double
Single
Panel Base
PB324
PB124E
PB132
PB348
w/Cover
PB424 ■
PB448
BB424* BB424H100 BB524* BB524H100
BB024E* BB024EH100 BB124E* BB124EH100
Box Base w/Cover
1 X 3/4" 1 X 1" 2 X 3/4" 2 X 1"
BB624* ■ BB624H100 ■ BB724* ■ BB724H100 ■
1 X 3/4" 1 X 1" 1 X 1.25"
**SH624** SH724**
1 X 3/4" 1 X 1" 1 X 1.25" Ribbon CBL
**TH824** TH924
**TH224** TH324
TH624RC‡
TH424RC‡
BB032
BB448
BB132
BB548
B A S B E AS E T O
BB648
H O O D
BB748
Hoods – Standard Mount Side Entry
Top Entry
*SH024** SH124**
SH032 SH132 SH132-125
SH648 SH748
TH232 TH332 TH332-125
TH848 TH948
H O O D S
For Inline, Portable or Special Service Connections Coupler Hoods mate to Standard Hoods ONLY.
Coupler Hoods – Inline Service Top Entry
1 X 3/4" 1 X 1" Ribbon CBL
CH824 CH924 CH824RC‡
CH624E CH724E CH724ERC‡
CH632 CH732
C O U P L E R
H O O D T O C O U P L E R
Reverse Locking Lever Hoods mate to Post Bases ONLY.
Lever Hoods – Rev. Lock Side Entry w /Lever(s)
1 X 3/4" 1 X 1"
LH024E LH124E
Top Entry w/Lever(s)
1 X 3/4" 1 X 1"
LH224E LH324E
H O O D S
T O
Post Bases accept Lever Hoods ONLY.
Bases – with Access Cover Panel Base w/Posts + Cover
Box Base w/Posts + Cover
PB224 ■ 1 X 3/4" 1 X 1" 2 X 3/4" 2 X 1"
BB224*■ BB224H100 BB324*■ BB324H100
H O O D
B A B S A E
S E S
**Notes: Available in Standard or HIGH Profile “H” configurations. (-add suffix) **Notes: Available in Standard or LOW Profile “L” configurations. (-add suffix) ■ Add “M” final suffix for metal cover option. ‡ See page I73 for ribbon cable kits.
© 2002 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
I 31
I Pos-E-Kon ™
Box Base ( no Cover )
1 X 3/4" 1 X 1" 2 X 3/4" 2 X 1"
412031.I01 PK 3/5 3/13/03 9:06 PM Page 32
K Series
80 + 16 Amps 600 Vac
4 @ 80A + 8 @ 16A 8 @ 80A + 16 @ 16A Contacts + Ground
4 @80A + 4 @80A + 8 @16A + G 16 @16A + G Install to Matching Series Hood/Base 4 @80A+ 8 216A+G
8 @80A+ 16 @16A+G
Male – Pins
MS212K
MS212K (x2)
Female – Sleeves
FS112K
FS112K (x2)
Screw Terminal Contact Carrier Inserts
Wiring Note: To 6 AWG (16mm2) 80A Contacts To 14 AWG (2.5mm2) 16A Contacts
Other Configurations
I Pos-E-Kon ™
Special order high amperage and/or combo configurations may be available. Contact Product Management/Technical Services. Also see M Series page I41.
I 32
© 2002 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412031.I01 PK 3/5 3/13/03 9:06 PM Page 33
80 + 16 Amps 600 Vac
K Series
# of Contacts + Ground Connection
K-12 8 @16A + G 4 @80A + G Single Lever
Double Lever
Bases – Standard Mount
Housing
NPT Entry
K-24 16 @16A, + G 8 @80A + G
Lever Locking Type Single
Double
Single
Panel Base
PB324
PB124E
PB348
w/Cover
PB424
Box Base ( no Cover )
Box Base w/Cover
1 X 3/4" 1 X 1" 2 X 3/4" 2 X 1"
BB424* BB424H100 BB524* BB524H100
BB024E* BB024EH100 BB124E* BB124EH100
BB448
B A S B E A
BB548
S E
BB648
T O
BB748
H O O D
■
BB624 * BB624H100 ■ BB724 ■* BB724H100 ■
1 X 3/4" 1 X 1" 1 X 1.25"
SH624** SH724**
1 X 3/4" 1 X 1" 1 X 1.25"
TH824** TH924**
Hoods – Standard Mount Side Entry
Top Entry
SH024** SH124**
TH224** TH324**
SH648 SH748
TH848 TH948
For Inline, Portable or Special Service Connections Coupler Hoods mate to Standard Hoods ONLY.
Coupler Hoods – Inline
Top Entry
1 X 3/4" 1 X 1"
CH824 CH924
CH624E CH724E
H O O D S
I H O O D T O
C O U P L E R
C O U P L E R
Reverse Locking Lever Hoods mate to Post Bases ONLY.
Lever Hoods – Rev. Lock Side Entry w/Lever(s)
1 X 3/4" 1 X 1"
LH024E LH124E
Top Entry w/Lever(s)
1 X 3/4" 1 X 1"
LH224E LH324E
Post Bases accept Lever Hoods ONLY.
Bases – with Access Cover Panel Base w/Posts + Cover
Box Base w/Posts + Cover
PB224 ■
1 X 3/4" 2 X 3/4"
BB224 ■* BB324 ■*
H O O D H O S O D T O B
B AS A E S E S
**Notes: Available in Standard or HIGH Profile “H” configurations. (-add suffix) **Notes: Available in Standard or LOW Profile “L” configurations. (-add suffix) ■ Add “M” final suffix for metal cover option.
© 2002 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
I 33
Pos-E-Kon ™
1 X 3/4" 1 X 1" 2 X 3/4" 2 X 1"
412031.I01 PK 3/5 3/13/03 9:06 PM Page 34
V Series
16 Amps 600 Vac
3, 6, 10, 16, 20, 26 & 32 Contacts + Control Contacts & Ground
3+G + 2 Control
6+G + 2 Control
3+G + 2 Control
+G + 2 Control
Male – Pins 20-14 AWG (0.5-2.5 mm2)
MS203V
MS206V
Female – Sleeves 20-14 AWG (0.5-2.5 mm2)
FS103V
FS106V
3+G + 2 Control
6+G + 2 Control
Male Insert (Order contacts below)
MC403V
MC406V
Female Insert (Order contacts below)
FC303V
FC306V
Install to Matching Series Hood/Base
Screw Terminal Inserts
Crimp Terminal Inserts
Pos-E-Kon ™
I Use small blade screwdriver to push wire entry tab in for EZ contact removal.
Control Contacts:
Crimp Tool Cat. No.
WT611TB
Crimp Contacts
Wire AWG (mm2)
Identification
Female
Male
Switch/Control
20 AWG (0.5 mm2)
No Groove
FP2000
MP2000
–
2
Groove
Make last, Break First
For “V” Series
Contacts Selection
18 AWG (0.75-1 mm )
1 Groove
FP1800
MP1800
CP1800
16 AWG (1.5 mm2)
2 Grooves
FP1600
MP1600
CP1600
14 AWG (2.5 mm2)
3 Grooves
FP1400
MP1400
CP1400
12 AWG (4.0 mm2)
No Groove
FP1200
MP1200
–
For all Inserts
3+G + 2 Control
6+G + 2 Control
125MM long, with base for snapping onto DIN rail
AMF010
AMF016
150MM long, with base for snapping onto DIN railF
AMF110
AMF116
DIN Rail Adapter Mount Frames Allows use of “open” interiors as separable barrier terminal blocks for panel assemblies; or can be used as OEM wiring assembly fixture
I 34
© 2002 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412031.I01 PK 3/5 3/13/03 9:06 PM Page 35
V Series
16 Amps 600 Vac # of Contacts + Ground Connection
(3 + G) + 2 Control Single Lever
Double Lever
Bases – Standard Mount
Housing
NPT Entry
(6 + G) + 2 Control
Lever Locking Type Single
Double
Single
Double
Panel Base
PB303V
PB103EV
PB306V
PB106EV
w/Cover
PB403V
Box Base (no Cover)
1 X 1/2" 1 X 3/4" 2 X 1/2" 2 X 3/4"
PB406V
BB403V
BB003EV
BB503V
BB103EV
BB406V
BB006EV
BB506V
BB106EV
B A B S A E S E
Box Base w/Cover
1 X 1/2" 1 X 3/4" 2 X 1/2" 2 X 3/4"
BB603V
T O
■
BB606V ■
H O O D
BB703V ■ BB706V ■
Hoods – Standard Mount 1 X 1/2" 1 X 3/4"
SH603V
Top Entry
1 X 1/2" 1 X 3/4"
TH803V
H O O D S
SH003V SH606V
SH006V
TH806V
TH206V
TH203V
For Inline, Portable or Special Service Connections Coupler Hoods mate to Standard Hoods ONLY.
Coupler Hoods – Inline Top Entry
1 X 1/2" 1 X 3/4"
CH803V
CH603EV CH806V
CH606EV
C O U P L E R
H O O D T O C O U P L E R
Reverse Locking Lever Hoods mate to Post Bases ONLY.
Lever Hoods – Rev. Lock Side Entry w/Levers
1 X 3/4"
LH003EV
LH006EV
Top Entry w/Levers
1 X 3/4"
LH203EV
LH206EV
Panel Base w/Posts + Cover Box Base w/Posts + Cover
PB203V 1 X 1/2" 1 X 3/4" 2 X 1/2" 2 X 3/4"
■
H O O D T O B A S E
Post Bases accept Lever Hoods ONLY.
Bases – with Access Cover
■
H O O D S
PB206V
■
BB203V ■ BB206V ■ BB303V ■
B A S E S
BB306V ■
Add “M” final suffix for metal cover option.
© 2002 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
I 35
I Pos-E-Kon ™
Side Entry
412031.I01 PK 3/5 3/13/03 9:06 PM Page 36
V Series
16 Amps 600 Vac
3, 6, 10, 16, 20, 26 & 32 Contacts +2 Control Contacts & Ground
10 + G + 2 Control
16 + G + 2 Control
20 +G + 2 Control
26 +G + 2 Control
32 +G + 2 Control
10 + G +2 Control
16 + G +2 Control
20 + G +2 Control
26 + G +2 Control
32 + G +2 Control
Male – Pins 20-14 AWG (0.5-2.5 mm2)
MS210V
MS216V
FS110V x2
MS210V+ MS216V
2x MS216V
Female – Sleeves 20-14 AWG (0.5-2.5 mm2)
FS110V
FS116V
FS210V x2
FS110V+ FS116V
2x FS116V
10 + G +2 Control
16 + G +2 Control
20 + G +2 Control
26 + G +2 Control
32 + G +2 Control
Male Insert (Order contacts below)
MC410V
MC416V
MC410V x2
MC410V+ MC416V
2x MC416V
Female Insert (Order contacts below)
FC310V
FC316V
FC310V x2
FC310V+ FC316V
2x FC316V
Install to Matching Series Hood/Base
Screw Terminal Inserts
Crimp Terminal Inserts
Pos-E-Kon ™
I Use small blade screwdriver to push wire entry tab in for EZ contact removal.
Crimp Tool Cat. No.
WT611TB
For all “V” Series
Contacts Selection Crimp Contacts
2
Wire AWG (mm )
Identification
Female
Male
Switch/Control
20 AWG (0.5 mm2)
No Groove
FP2000
MP2000
–
2
18 AWG (0.75-1 mm )
1 Groove
FP1800
MP1800
CP1800
16 AWG (1.5 mm2)
2 Grooves
FP1600
MP1600
CP1800
14 AWG (2.5 mm2)
3 Grooves
FP1400
MP1400
CP1400
12 AWG (4.0 mm2)
No Groove
FP1200
MP1200
–
10 + G
16 + G
AMF124
AMF124
Grooves
DIN Rail Adapter Mount Frames Allows use of “open” interiors as separable barrier terminal blocks for panel assemblies; or can be used as OEM wiring assembly fixture
I 36
150MM long, with base for snapping onto DIN rail
© 2002 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412031.I01 PK 3/5 3/13/03 9:06 PM Page 37
16 Amps 600 Vac
V Series
# of Contacts + Ground Connection
V10: (10 + G) or (16 + G) + 2 Control Single Lever
Double Lever Housing
Bases – Standard Mount
NPT Entry
Panel Base
V20: (20 + G) or (26 + G) or (32 + G) + 2 Control
Lever Locking Type Double
Single
PB110EV
PB348
w/Cover
PB448
Box Base (no Cover)
1 X 3/4" 1 X 1" 2 X 3/4" 2 X 1"
Box Base w/Cover
1 X 3/4" 1 X 1" 2 X 3/4" 2 X 1"
BB010EV BB448 BB110EV BB548
B A S E
B A S E T O
BB648
H O O D
BB748
Hoods – Standard Mount 1 X 3/4" 1 X 1" 1 X 1.25"
Top Entry
1 X 1/2" 1 X 3/4" 1 X 1"
SH010V SH010V100
SH648 SH748
TH210V
TH848 TH948
H O O D S
For Inline, Portable or Special Service Connections C Coupler Hoods mate to Standard Hoods ONLY.
Coupler Hoods – Inline Top Entry
1 X 3/4" 1 X 1" 1 X 1.25"
CH610EV CH610EV100 CH610EV125
O U P L E R
H O O D T O C O U P L E R
Reverse Locking Lever Hoods mate to Post Bases ONLY.
Lever Hoods – Rev. Lock Side Entry w/Levers
1 X 3/4"
LH010EV
Top Entry w/Levers
1 X 3/4" 1 X 1"
LH210EV LH210EV100
H O O D S H O O D
Post Bases accept Lever Hoods ONLY.
T O
Bases – with Access Cover Panel Base w/Posts + Cover
Box Base w/Posts + Cover
■
PB210V ■
1 X 3/4" 2 X 3/4"
BB210V ■ BB310V ■
B A S B E
A S E S
Add “M” final suffix for metal cover option.
© 2002 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
I 37
I Pos-E-Kon ™
Side Entry
412031.I01 PK 3/5 3/13/03 9:06 PM Page 38
T Series
16 Amps 600 Vac
6, 10, 16 & 24 Contacts + Ground
6
10
16
24
6+G
10 + G
16 + G
24 + G
Male – Pins 20-14 AWG (0.5-2.5 mm2)
MS206T
MS210T
MS216T
MS224T
Female – Sleeves 20-14 AWG (0.5-2.5 mm2)
FS106T
FS110T
FS116T
FS124T
Install to
Matching Series • High Temp 200°C Components Hood/Base • Corrosion Resistant Housings Screw Terminal Inserts
T Series Benefits: • High temp 200°C rated inserts • Silicone Viton® seals for molded edge gaskets* • Corrosion resistant copper-free aluminum housings w/special finish • UL94V-O ergonomic new thermoplastic handles • Electro-static epoxy powder coated finish
Pos-E-Kon ™
I
*Viton® is a trademark of DuPont Dow Elastomers.
I 38
© 2002 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412031.I01 PK 3/5 3/13/03 9:06 PM Page 39
16 Amps 600 Vac
T Series
# of Contacts + Ground Connection
High Temp 200°C Single Lever
6
Double Lever
Bases – Standard Mount
Housing
10
16
24
Lever Locking Type
NPT Entry
Single
Double
Double
Double
PB306T
PB110T
PB116T
PB124T
1 X 1/2" 1 X 3/4" 2 X 1/2" 2 X 3/4"
BB406T
BB010T BB016T
BB024T
BB116T
BB124T
1 X 1/2" 1 X 3/4" 1 X 1"
SH606T
Side Entry
SH016T
SH024T SH124T
TH806T
Top Entry
1 X 1/2" 1 X 3/4" 1 X 1"
Panel Base
Box Base (no Cover)
BB506T
B A S E
BB110T
SH010T
TH210T TH216T
TH224T TH324T
Coupler Hoods mate to Standard Hoods ONLY. Top Entry
CH806T
CH610T CH616T CH716T
CH624T CH724T
H O O D S
H O O D T O
C O U P C L O E R
U P L E R
Note: Hoods and Bases are green colored to denote special T series.
© 2002 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
I 39
I Pos-E-Kon ™
For Inline, Portable or Special Service Connections 1 X 1/2" 1 X 3/4" 1 X 1"
T O H O O D
Hoods – Standard Mount
Coupler Hoods – Inline
B A S E
412031.I01 PK 3/5 3/13/03 9:07 PM Page 40
M Series
412031.I02 PK 3/5 3/13/03 9:18 PM Page 41
M Series
Mix and Match Modular Connections • Signal, fiber optic, control and power connections all in one connection point. • 2, 3, 5 and 7 slot insert frames provide unlimited flexibility. • # of different contacts/# of positions each equals choice of interconnections. • Standard single inserts: ➝ 3 pole CoAx Signal ➝ 3 pole, 50A, 600 VAC ➝ 4 pole +G, 5 pole 16A, 600VAC ➝ 5 pole, 20A, 400V ➝ 10 pole, 10A, 250V or 10 pole, POF (fiber optic) ➝ 20 pole, 5A, 63V ➝ Dummy block (MO) • Standard B series Hoods and Bases
I Pos-E-Kon ™
How to Specify Select types of contacts/circuits (see above). Select number of each (per carrier insert above). Add up to get frame size e.g.: 2-POF + 2-50A + 8-10A = 3 carrier inserts plus 3-slot frames. Match frame size required to Hood & Base options (mating).
Contacts + Inserts + Insert Holder (Frame) + Housing Easy insert removal
© 2002 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
I 41
412031.I02 PK 3/5 3/13/03 9:18 PM Page 42
M (3P CoAx) Series
1.5 Amps 50 V
Specifications Number of Poles
3
Termination Method
Crimp (or solder)
Contacts
Solid Drilled, 3.6mm CoAxial Copper Alloy, Gold Plated
Rated Current
1.5A
Rated Voltage
50V
Volume Resistance
)6 milliohms
Surge Impedance
50 Ohms
Frequency Range
2 GHz
Inserts
CoAx Pin & Sleeve
3 Position
Crimp Terminal Inserts
3P CoAx
Male Insert
MC303M
Female Insert
FC203M
Contacts Tools
Pos-E-Kon ™
I
Male Crimp Contacts Crimping Tool
CT700TB
Male CoAx Pin Contact
MCX500
RG174, 179, 316 Crimp Die RG58 Crimp Die
CD710TB CD720TB
Cable Size/Type
RG-174 RG-179 RG-316
Male CoAx Pin Cotact
MCX510
Contact Removal Tool
RT000TB
Cable Size/Type
RG-58
Insert Puller
PT300TB
Dummy Inserts
I 42
Female Crimp Contacts Female CoAx Pin Contact
FCX400
Cable Size/Type
RG-174 RG-179 RG-316
Female CoAx Pin Cotact
FCX410
Cable Size/Type
RG-58
0
Male Blind Insert: for Frame place keeping
MC100M
Female Blind Insert: for Frame place keeping
FC000M
© 2002 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412031.I02 PK 3/5 3/13/03 9:18 PM Page 43
50 Amps 600 Vac
Specifications
Inserts
Number of Poles
3
Termination Method
Crimp
Contacts
Solid Drilled, 3.6mm Copper Alloy, Silver Plated
M (3P) Series
Pin & Sleeve Crimp Terminal Inserts
Rated Current
50 Amp
Rated Voltage
600V
Rated Impulse Voltage 8.0 kV Test Voltage
4 kV
Volume Resistance
)1 milliohm
3 Position 3P
Male Insert
MC103M
Female Insert
FC003M
Contacts Male Crimp Pins
Tools Crimping Tool RG174, 179, 316 Crimp Die
CD710TB
RT000TB
1.5 mm2
16 AWG
MP16SD50
2
2.5 mm
14 AWG
MP14SD50
4 mm2
12 AWG
MP12SD50
2
6 mm
10 AWG
MP10SD50
10 mm2
8 AWG
MP08SD50
1.5 mm2
16 AWG
FP16SD50
2
2.5 mm
14 AWG
FP14SD50
4 mm2
12 AWG
FP12SD50
2
6 mm
10 AWG
FP10SD50
10 mm2
8 AWG
FP08SD50
Female Crimp Pins Insert Puller
Dummy Inserts
PT300TB
0
Male Blind Insert: for Frame place keeping
MC100M
Female Blind Insert: for Frame place keeping
FC000M
© 2002 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
I 43
I Pos-E-Kon ™
Contact Removal Tool
CT400TB
412031.I02 PK 3/5 3/13/03 9:18 PM Page 44
M (4/5P) Series
16 Amps 600 Vac
Inserts
Specifications Number of Poles
4 +G 5
Termination Method
Crimp
Contacts
Stamped & Rolled, 2.5 mm Copper Alloy, Silver Plated
Rated Current
16A
Rated Voltage
600V
Crimp Terminal Inserts
5.7 kV
Volume Resistance
)5 milliohms
4&5 Position 4P +G
Male Insert
MC704M
Female Insert
FC604M
*Ground Makes First, Breaks Last
Rated Impulse Voltage 8.0 kV Test Voltage
Pin & Sleeve
Crimp Terminal Inserts
5P
Male Insert
MC705M
Female Insert
FC605M
Contacts
I
Male Crimp Pins
Pos-E-Kon ™
Tools Crimping Tool
CT700TB
20 – 16 AWG
MP16RF16
2
1.5 – 2.5 mm
16 – 14 AWG
MP14RF16
Crimping Die
20 – 16 AWG 16 – 14 AWG
CD730TB CD740TB
2.5 – 4 mm2
12 AWG
MP12RF16
Contact Locator
20 – 16 AWG 16 – 14 AWG
CL010TB CL020TB
Female Crimp Pins 0.5 – 1.5 mm2
20 – 16 AWG
FP16RF16
1.5 – 2.5 mm2
16 – 14 AWG
FP14RF16
12 AWG
FP12RF16
Contact Removal Tool
RT800TB
Insert Puller
PT300TB
Dummy Inserts
I 44
0.5 – 1.5 mm2
2
2.5 – 4 mm
0
Male Blind Insert: for Frame place keeping
MC100M
Female Blind Insert: for Frame place keeping
FC000M
© 2002 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412031.I02 PK 3/5 3/13/03 9:18 PM Page 45
20 Amps 400 V
Specifications
Inserts
Number of Poles
5
Termination Method
Crimp
Contacts
Solid Drilled, 2.5 mm Copper Alloy, Silver Plated
Rated Current
20A
Rated Voltage
400V
M (5P) Series
Pin & Sleeve Crimp Terminal Inserts
5 Position 5P
Male Insert
MC105M
Female Insert
FC005M
Rated Impulse Voltage 6.0 kV Test Voltage
3.5 kV
Volume Resistance
)2 milliohms
Contacts Tools
I
Male Crimp Pins CT700TB
0.5 mm2
20 AWG
MP20SD20
2
1.0 mm
18 AWG
MP18SD20
Crimping Die
20 – 14 AWG 12 AWG
CD750TB CD760TB
1.5 mm2
16 AWG
MP16SD20
2
2.5 mm
14 AWG
MP14SD20
Contact Locator
20 – 14 AWG 12 AWG
CL030TB CL040TB
4 mm2
12 AWG
MP12SD20
0.5 mm2
20 AWG
FP20SD20
1.0 mm2
18 AWG
FP18SD20
2
1.5 mm
16 AWG
FP16SD20
2.5 mm2
14 AWG
FP14SD20
12 AWG
FP12SD20
Contact Removal Tool Insert Puller
Female Crimp Pins
RT000TB
PT300TB
2
4 mm
Dummy Inserts
0
Male Blind Insert: for Frame place keeping
MC100M
Female Blind Insert: for Frame place keeping
FC000M
© 2002 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
I 45
Pos-E-Kon ™
Crimping Tool
412031.I02 PK 3/5 3/13/03 9:18 PM Page 46
M (10P) Series
10 Amps 250 V
Specifications
Inserts
Number of Poles
10
Termination Method
Crimp
Contacts
Solid Drilled, 1.6 mm Copper Alloy, Silver Plated
Rated Current
10A
Rated Voltage
250V
Pin & Sleeve
10 Position
Crimp Terminal Inserts
10P
Male Insert
MC110M
Female Insert
FC010M
Rated Impulse Voltage 4.0 kV Test Voltage
2.2 kV
Volume Resistance
)3 milliohms
Contacts Male Pins
Tools
2
Crimping Tool
I Pos-E-Kon ™
Contact Removal Tool Insert Puller
WT80
I.D.
22 AWG
1
MP22SD
2.5 mm2
20 AWG
2
MP20SD
2
4 mm
18 AWG
3
MP18SD
6 mm2
16 AWG
4
MP16SD
14 AWG
5
MP14SD
Identification
Female
10 mm
Female Sleeves PT300TB
2
I.D.
0.37 mm
22 AWG
1
FP22SD
2.5 mm2
20 AWG
2
FP20SD
2
4 mm
18 AWG
3
FP18SD
6 mm2
16 AWG
4
FP16SD
14 AWG
5
FP14SD
2
10 mm
Crimping Tools
Fiber Optic Pin and Sleeve Fiber Optic Crimp Tool
CT610F
Pin Contact
Glass P.O.F.
1mm
MPF530
Positioning Sleeve
FPS701
Sleeve Contact
Glass P.O.F.
1mm
FPF520
Dummy Inserts
I 46
Male
0.37 mm
2
RT614
Identification
0
Male Blind Insert: for Frame place keeping
MC100M
Female Blind Insert: for Frame place keeping
FC000M
© 2002 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412031.I02 PK 3/5 3/13/03 9:18 PM Page 47
5 Amps 63 V
Specifications
Inserts
Number of Poles
20
Termination Method
Crimp
Contacts
Stamped, Formed, 1.0 mm Copper Alloy, Gold Plated
Rated Current
5A
Rated Voltage
63V
M (20P) Series
Pin & Sleeve Crimp Terminal Inserts
20P Position 20P
Male Insert
MC120M
Female Insert
FC020M
Rated Impulse Voltage 4.0 kV Test Voltage
1.68 kV
Volume Resistance
)5 milliohms
Contacts Male Pins
Tools CT500TB
Contact Removal Tool
RT200TB
Insert Puller
Dummy Inserts
0.25 mm2
28-24 AWG
MP24GS
0.5 mm2
24-20 AWG
MP20GS
.25 mm2
28-24 AWG
FP24GS
0.5 mm2
24-20 AWG
FP20GS
I
Female Sleeves
PT300TB
Pos-E-Kon ™
Crimping Tool
0
Male Blind Insert: for Frame place keeping
MC100M
Female Blind Insert: for Frame place keeping
FC000M
© 2002 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
I 47
412031.I02 PK 3/5 3/13/03 9:18 PM Page 48
M Series
B6 Housing 600 Vac: 2 inserts
Insert Holders
+
# of Inserts
Housings
2
Select 2 Insert Male & Female Carrier Frames for B6 Housings; for any M-Insert
Single Lever Male + Female Carrier Frame for Inserts
Bases – Standard Mount
Housing
Pos-E-Kon ™
Single
PB306 I
w/Cover
PB406 I 1 X 1/2" 1 X 3/4" 1 X 1" 2 X 1/2" 2 X 3/4" 2 X 1"
BB406 BB406H075 BB406H100 BB506 BB506H075 BB506H100
Box Base w/Cover
1 X 1/2" 1 X 3/4" 1 X 1" 2 X 1/2" 2 X 3/4" 2 X 1"
BB606 I BB606H075 I BB606H100 I BB706 I BB706H075 I BB706H100 I
Side Entry
1 X 1/2" 1 X 3/4" 1 X 1"
SH606 SH606H075 SH606H100
1 X 1/2" 1 X 3/4" 1 X 1"
TH806 TH806H075 TH806H100
2 Insert Holder Female Frame
F2F006M
Lever Locking Type
Panel Base
Box Base ( no Cover )
I
NPT Entry
B A S B E A S E T O H O O D
Hoods – Standard Mount
Top Entry
H O O D H S O O D T O
For Inline, Portable or Special Service Connections Coupler Hoods
Coupler Hoods mate to Standard Hoods ABOVE.
2 Insert Holder Male Frame Top Entry
F2M106M I
I 48
1 X 1/2" 1 X 3/4" 1 X 1"
CH806 CH806H075 CH806H100
C O U P L E R
C O U P L E R
Add “M” final suffix for metal cover option.
© 2002 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412031.I02 PK 3/5 3/13/03 9:18 PM Page 49
B10 Housing 600 Vac: 3 Inserts
Insert Holders
+
# of Inserts
Housings
3
Select 3 Insert Male & Female Carrier Frames for B10 Housings; for any M-Insert
Single Lever
Double Lever Housing
Bases – Standard Mount
Male + Female Carrier Frame for Inserts
M Series
NPT Entry
Lever Locking Type Single
Double
Panel Base
PB310
PB110E
w/Cover
PB410
Box Base ( no Cover )
1 X 1/2" 1 X 3/4" 1 X 1" 2 X 1/2" 2 X 3/4" 2 X 1"
BB410 BB410H075 BB410H100 BB510 BB510H075 BB410H100
BB010E BB010EH075 BB010EH100 BB110E BB110EH075 BB110EH100
Box Base w/Cover
1 X 1/2" 1 X 3/4" 1 X 1" 2 X 1/2" 2 X 3/4" 2 X 1"
BB610 I BB610H075 I BB610H100 I BB710 I BB710H075 I BB710H100 I
Side Entry
1 X 1/2" 1 X 3/4" 1 X 1"
SH610 SH610H075 SH610H100
SH010 SH010H075 SH010H100
Top Entry
1 X 1/2" 1 X 3/4" 1 X 1"
TH810 TH810H075 TH810H100
TH210 TH210H075 TH210H100
B A B S A E S E
T O H O O D
Hoods – Standard Mount
3 Insert Holder Female Frame
F3F010M
C O U Coupler Hoods mate to Standard Hoods. P 1 X 1/2" CH810 CH610E L Top Entry 1 X 3/4" CH810H075 CH610EH075 E 1 X 1" CH810H100 CH610EH100 R
Coupler Hoods – Inline
H O O D T O C O U P L E R
Reverse Locking Lever Hoods mate to Post Bases ONLY.
Lever Hoods – Reversed Lock
3 Insert Holder Male Frame
F3M110M
Side Entry w/Lever(s)
1 X 1/2" 1 X 3/4" 1 X 1"
LH010E LH010EH075 LH010EH100
Top Entry w/Lever(s)
1 X 1/2" 1 X 3/4" 1 X 1"
LH210EH100
Post Bases accept Lever Hoods ONLY.
Bases – with Access Cover
Panel Base w/Cover
Box + Posts w/Cover
I
H O O LH210E D H LH210EH075 S O O D T O PB210
I
B 1 X 1/2" 1 X 3/4" 1 X 1" 2 X 1/2" 2 X 3/4" 2 X 1"
BB210 I BB210H075 I BB210H100 I BB310 I BB310H075 I BB310H100 I
B A A S S E E S
Add “M” final suffix for metal cover option.
© 2002 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
I 49
Pos-E-Kon ™
For Inline, Portable or Special Service Connections
I H O O D S
412031.I02 PK 3/5 3/13/03 9:18 PM Page 50
M Series
B16 Housing 600 Vac: 5 Inserts
Insert Holders
+
# of Inserts
Housings
5
Select 5 Insert Male & Female Carrier Frames for B16 Housings; for any M-Insert.
Single Lever Male + Female Carrier Frame for Inserts
Double Lever
Bases – Standard Mount
Housing
NPT Entry
Lever Locking Type Single
Double
Panel Base
PB316
PB116E
w/Cover
PB416
Box Base w/Lever ( no Cover )
1 X 3/4" 1 X 1" 2 X 3/4" 2 X 1"
BB416* BB416H100 BB516* BB516H100
BB016E* BB016EH100 BB116E* BB116EH100
Box Base w/Cover & Lever
1 X 3/4" 1 X 1" 2 X 3/4" 2 X 1"
BB616* I BB616H100 I BB716* I BB716H100 I
Side Entry w/Posts
1 X 3/4" 1 X 1"
SH616* SH716
SH016* SH116H
Top Entry w/Posts
1 X 3/4" 1 X 1"
TH816* TH816H100
TH216* TH316H
B A S E
B A S E T O H O O D
Hoods – Standard Mount
Pos-E-Kon ™
I
5 Insert Holder Female Frame
F5F016M Note: AF10F216M Optional Frame available (+5 insert) Positions V -Z for B32 Housings.
Coupler Hoods – Inline
H O O D S
H O O D
For Inline, Portable or Special Service Connections C
C O U P L E R
Coupler Hoods mate to Standard Hoods ABOVE.
Top Entry w/Lever(s)
1 X 3/4" 1 X 1"
CH816H CH916H
CH616EH CH716EH
O U P L E R
T O
Reverse Locking Lever Hoods – Reversed Lock
Lever Hoods mate to Post Bases ONLY. Side Entry w/Lever(s)
1 X 3/4" 1 X 1"
LH016E LH116EH
Top Entry w/Lever(s)
1 X 3/4" 1 X 1"
LH216E LH316EH
5 Insert Holder Male Frame
F5M116M Note: AF10M316M Optional Frame available (+5 insert) Positions V -Z for B32 Housings.
Bases – with Access Cover
Post Bases accept Lever Hoods ONLY. Panel Base w/Cover
Box + Posts w/Cover
O D T O
PB216 I
1 X 3/4" 1 X 1" 2 X 1/2" 2 X 3/4" 2 X 1"
H O O D H S O
BB216* I BB216H100 I
B
B AS A E S E S
BB316* I BB316H100 I
*Notes: Available in Standard or HIGH Profile “H” configurations. (-add suffix) I Add “M” suffix for metal cover option.
I 50
© 2002 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412031.I02 PK 3/5 3/13/03 9:18 PM Page 51
M Series
B24 Housing 600 V: 7 Inserts
Insert Holders
+
# of Inserts
Housings
7
Select 7 Insert Male & Female Carrier Frames for B24 Housings; for any M-Insert
Single Lever Male + Female Carrier Frame for Inserts
Double Lever
Bases – Standard Mount
Housing
NPT Entry
Panel Base w/Cover
Lever Locking Type Single
Double
PB324
PB124E
PB424
Box Base w/Lever ( no Cover )
1 X 3/4" 1 X 1" 2 X 3/4" 2 X 1"
BB424* BB424H100 BB524* BB524H100
BB024E* BB024EH100 BB124E* BB124EH100
Box Base w/Cover & Lever
1 X 3/4" 1 X 1" 2 X 3/4" 2 X 1"
BB624* I BB624H100 I BB724* I BB724H100 I
Side Entry w/Posts
1 X 3/4" 1 X 1" 1 X 1.25"
SH624 SH724
1 X 3/4" 1 X 1" 1 X 1.25"
TH824 TH924
TH224 TH324
RIBBON CBL
TH624RC‡
TH424RC‡
B A S E
B A S E T O H O O D
Hoods – Standard Mount
7 Insert Holder Female Frame
F7F024M Note: AF1024M Optional Frame available (+5 insert) Positions T-Z for B48 Housings.
H O O D S
For Inline, Portable or Special Service Connections Coupler Hoods mate to Standard Hoods ONLY.
Coupler Hoods – Inline
Top Entry w/Lever(s)
1 X 3/4" 1 X 1" RIBBON CBL
CH824 CH924 CH824RC‡
CH624E CH724E CH724ERC‡
C O U P L E R
H O O D T O C O U P L E R
Reverse Locking Lever Hoods mate to Post Bases ONLY.
Lever Hoods – Reversed Lock
Side Entry w/Lever(s)
1 X 3/4" 1 X 1"
LH024E LH124E
Top Entry w/Lever(s)
1 X 3/4" 1 X 1"
LH224E LH324E
7 Insert Holder Male Frame
Post Bases accept Lever Hoods ONLY.
Bases – with Access Cover
F7M124M
Panel Base w/Posts and Cover
Note: F104M324M Optional Frame available (+7 insert) Positions T -Z for B48 Housings.
Box Base w/Posts and Cover
PB224 I
1 X 3/4" 2 X 3/4"
BB224 I BB324 I
H O O D H S O O D T O B A
B S A E S E S
*Notes: Available in Standard or HIGH Profile “H” configurations. (-add suffix) Add “M” final suffix for metal cover option. ‡ See page I73 for ribbon cable kits. I
© 2002 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
I 51
I Pos-E-Kon ™
Top Entry w/Posts
SH024 SH124
412031.I02 PK 3/5 3/13/03 9:18 PM Page 52
Notes
Pos-E-Kon ™
I
I 52
© 2002 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412031.I02 PK 3/5 3/13/03 9:18 PM Page 53
Reference and Accessories Engineering Reference Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I54 Dimensions/Lay-In Charts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I58 Dust Covers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I68 Adapter Plate Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I69 Gaskets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I70 Insert Coding and Guide Pins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I71 Cable and Conduit Entry Options/Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . I72 Fiber Optic Cable Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I74
I Pos-E-Kon ™
© 2002 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
I 53
412031.I02 PK 3/5 3/13/03 9:18 PM Page 54
Engineering Reference A Series
B Series
Specifications
Specifications
DIN VDE 0627/86 DIN VDE 0110/02.79 DIN VDE 0110-1/04.97 IEC 60-664-1, DIN/IEC 512
DIN VDE 0627/86 DIN VDE 0110/02.79 DIN VDE 0110-1/04.97 IEC 60-664-1, DIN/IEC 512
Approvals
Approvals MEIE, EZU, SEV
®
Inserts
Contacts ( +Ground ) Working current
3,4,10,16,32 (2x16) A3,A4 @ 10A max. A10 - A32 @ 16A max. 600Vac 4 kV eff. 3 Glass Filled Thermoplastic -40C/ -40F to +125C /+257 °F UL94 V-0
Rated Voltage Test Voltage Pollution Degree Material Temperature Range Flammability
Contacts
Contacts ( +Ground )
6,10,16,24, 32 (2x16), 48 (2x24)
Working current Rated Voltage Test Voltage Pollution Degree Material Temperature Range Flammability
16A max. 600Vac 3 kV eff. 3 Glass Filled Thermoplastic -40C/ -40F to +125C /+257 °F UL94 V-0
Contacts
Material Surface
Solid drilled Copper alloy Hard Silver Plated Hard Gold Plated available ) 1 milliohm Wire AWG: 20-14 AWG (0.5-2.5mm) 20-12 AWG (0.5-2.5mm)
Contact Resistance Screw Terminals: + with Wire Protection Crimp Terminals:
Housings
Material Surface
Solid drilled Copper alloy Hard Silver Plated Hard Gold Plated available ) 1 milliohm Wire AWG: 20-14 AWG (0.5-2.5mm) 20-12 AWG (0.5-2.5mm)
Contact Resistance Screw Terminals: + with Wire Protection Crimp Terminals:
Housings
Materials: (EPDM Seal Gaskets) Locking Mechanisms: > Single Locking Levers
Die Cast Aluminum alloy Epoxy Powder Coat Finish @ A3, 4, 10, 16 Steel, Zinc & Chrome Plated @ A32 Steel, Zinc & Chrome Plated
> Double Locking Levers
Materials: (EPDM Seal Gaskets) Locking Mechanisms: > Single Locking Levers
Die Cast Aluminum alloy Epoxy Powder Coat Finish @ B6, 10, 24, 32, 48 Steel, Zinc & Chrome Plated @ B10, 16, 24 Stainless Steel w/ high impact Thermoplastic Split Grips @ 32 Steel, Zinc & Chrome Plated -40C/ -40F to +125C /+257 °F IP65 Locked Positions per DIN VDE 0470, IEC 529
> Double Locking Levers
> Double Locking Levers Temperature Range Internal Protection
-40C/ -40F to +125C /+257 °F A3,4: IP44 A10,16,32: IP65 per DIN VDE 0470, IEC 529
Thermal Capacity Conductor size 1mm
2
Conductor size 1.5mm
Conductor size 2.5mm
2
A 10 Crimp
14
A3
A3
I N 10
A 10 Crimp
8
4 2 0
A 10 Crimp
A 10 Screw
12
6
per DIN/IEC 512 2
Conductor size 1mm
Conductor size 2.5mm
I N 16
16
A 10 Screw A 10 Screw
A 16 Crimp
A 16 Crimp
A 16 Screw
A 16 Crimp A3
A 10 Screw
A 16 Screw
2
B 6
B 6 14 B 10
12 10 8 6
B 16
B 24
B 10 B 16
B 24
4 2 0
20 40 60 80 100 120 20 40 60 80 100 120 20 40 60 80 100 120 Ambient temperature (° C )
I 54
Thermal Capacity
per DIN/IEC 512 2
Temperature Range Internal Protection
Rated current per contact ( A )
Rated operating current per contact ( A )
Pos-E-Kon ™
MEIE, EZU, SEV
®
Inserts
I
DIN VDE 0627/86 DDIN VDE 0110/02.79 DIN VDE 0110-1/04.97 IEC 60-664-1, DIN/IEC 512
20 40 60 80 100 120 20 40 60 80 100 120 Ambient temperature (° C )
© 2002 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412031.I02 PK 3/5 3/13/03 9:18 PM Page 55
Engineering Reference C Series
D Series
Specifications
Specifications
DIN VDE 0627/86 DIN VDE 0110/02.79 DIN VDE 0110-1/04.97 IEC 60-664-1, DIN/IEC 512
DIN VDE 0627/86 DIN VDE 0110/02.79 DIN VDE 0110-1/04.97 IEC 60-664-1, DIN/IEC 512
Approvals
DIN VDE 0627/86 DDIN VDE 0110/02.79 DIN VDE 0110-1/04.97 IEC 60-664-1, DIN/IEC 512
DIN 43652
Approvals MEIE, EZU, SEV
®
Inserts
MEIE, EZU, SEV
®
Inserts
Contacts ( +Ground ) Working current
6, 12 (2 x 6) 35A
Rated Voltage Test Voltage Pollution Degree Material Temperature Range Flammability
600Vac 3 kV eff. 3 Glass Filled Thermoplastic -40C/ -40F to +125C /+257 °F UL94 V-0
Contacts
Contacts ( +Ground )
7, 8, 15, 25, 40, 50 (2x25) 64, 80 (2x40), 128 (2X64) 10A 600Vac 4 kV eff. 3 Glass Filled Thermoplastic -40C/ -40F to +125C /+257 °F UL94 V-0
Working current Rated Voltage Test Voltage Pollution Degree Material Temperature Range Flammability
I
Contacts Solid drilled Copper alloy Hard Silver Plated Hard Gold Plated available ) 0.5 milliohm Wire AWG: 20-10 AWG (0.5-6.0mm) n/
Contact Resistance Screw Terminals: + with Wire Protection + w/o Wire Protection
Housings
Material Surface
Solid drilled Copper alloy Hard Silver Plated Hard Gold Plated available ) 3 milliohm Wire AWG: 26-14 AWG (0.1422.5mm) POF {0} 1MM
Contact Resistance Crimp Terminals: > Glass Fibre optic Cable:
Pos-E-Kon ™
Material Surface
Housings
Materials: (EPDM Seal Gaskets) Locking Mechanisms: > Single Locking Levers
Die Cast Aluminum alloy Epoxy Powder Coat Finish @ C6, 12 Steel, Zinc & Chrome Plated @ C6 Stainless Steel w/high impact Thermoplastic Split Grips @ C12 Steel, Zinc & Chrome Plated -40C/ -40F to +125C /+257 °F IP65 Locked Positions per DIN VDE 0470, IEC 529
> Double Locking Levers
> Double Locking Levers Temperature Range Internal Protection
Thermal Capacity
per DIN/IEC 512
Materials: (EPDM Seal Gaskets) Locking Mechanisms: > Single Locking Levers
Die Cast Aluminum alloy Epoxy Powder Coat Finish @ D7, 8, 15, 25, 40, 64, 128 Steel, Zinc & Chrome Plated @ D40, 64 Stainless Steel w/ high impact Thermoplastic Split Grips @ D50, 80 Steel, Zinc & Chrome Plated -40C/ -40F to +125C /+257 °F IP65 Locked Positions per DIN VDE 0470, IEC 529
> Double Locking Levers
> Double Locking Levers Temperature Range Internal Protection
Thermal Capacity
per DIN/IEC 512
Rated operating current per contact ( A )
Rated current per contact ( A )
Conductor size 0.5mm
35 30 25 20
Conductor size 4mm 2
15 Conductor size 6mm 2
10 5
2
2 Conductor size 1.5mm
I N 10
D 7
D 15 9 8
D 15 D 25
D 7
7 6
D 25
D 64
5 4 D 40 D 64
3 2 1
0 20
40
0
60 80 100 120
Ambient temperature ( ° C )
© 2002 Thomas & Betts Corporation. Specifications are subject to change without notice.
20
40
60 80 100 120 0
20 40 60 80
100 120
Ambient temperature ( ° C )
www.tnb.com
I 55
412031.I02 PK 3/5 3/13/03 9:18 PM Page 56
Engineering Reference DD Series
K Series
Specifications
Specifications
DIN VDE 0627/86 DIN VDE 0110/02.79 DIN VDE 0110-1/04.97 IEC 60-664-1, DIN/IEC 512
DIN VDE 0627/86 DDIN VDE 0110/4 VDE 0100/5.73-42a IEC 60-664-1, DIN/IEC 512 VDE o113/1.73-10.1.3
Approvals
Approvals MEIE, EZU, SEV
MEIE, EZU, SEV
®
®
Inserts
Inserts
Contacts ( +Ground ) Working current
24, 42, 72, 108, 144 (2x72) 216 (2x108) 10A 600Vac 2 kV eff. 3 Glass Filled Thermoplastic -40C/ -40F to +125C /+257 °F UL94 V-0
Rated Voltage Test Voltage Pollution Degree Material Temperature Range Flammability
Contacts
Working current Rated Voltage Test Voltage Pollution Degree Material Temperature Range Flammability
8 (16A) + 4 (80A) 16 (16A) + 8 (80A) 16A and 80A dual 600Vac 2 kV eff. 3 Glass Filled Thermoplastic -40C/ -40F to +125C /+257 °F UL94 V-0
Contacts
Material Surface
Solid drilled Copper alloy Hard Silver Plated Hard Gold Plated available ) 3 milliohm Wire AWG: 26-14 AWG (0.14-2.5mm) POF {0} 1mm
Contact Resistance Crimp Terminals: > Glass Fibre Optic Cable:
Housings
Material Surface Contact Resistance Screw Terminals: + with Wire Protection: (16A) (80A contacts)
Solid drilled Copper alloy Hard Silver Plated Hard Gold Plated available ) 1 milliohm Wire AWG: 20-14 AWG (0.5-2.5mm) 18-4 AWG (1.5-16.0mm)
Housings
Materials: (EPDM Seal Gaskets) Locking Mechanisms: > Single Locking Levers
Die Cast Aluminum alloy Epoxy Powder Coat Finish @ DD24, 42, 72, 108, 216 Steel, Zinc & Chrome Plated @ DD42, 72, 108 Stainless Steel w/high impact Thermoplastic Split Grips @ DD144 Steel, Zinc & Chrome Plated -40C/ -40F to +125C /+257 °F IP65 Locked Positions per DIN VDE 0470, IEC 529
> Double Locking Levers
> Double Locking Levers Temperature Range Internal Protection
Materials: (EPDM Seal Gaskets) Locking Mechanisms: > Single Locking Levers > Double Locking Levers
Temperature Range Internal Protection
Die Cast Aluminum alloy Epoxy Powder Coat Finish @ K12, K24 Steel, Zinc & Chrome Plated @ K12 Stainless Steel w/ high impact Thermoplastic Split Grips
-40C/ -40F to +125C /+257 °F IP65 Locked Positions per DIN VDE 0470, IEC 529
Thermal Capacity Conductor size 0.7mm
2
Conductor size 1.5mm
2
10 DD 24
Rater current per contact ( A )
Pos-E-Kon ™
I
Contacts ( +Ground )
9 DD 24 8
DD 108
DD 42
DD 42 7 6 DD 72 5 DD 72 4 3 2 DD 108 1 0
20 40 60 80 100 120 0
20 40 60
80 100 120
Ambient temperature ( ° C )
I 56
© 2002 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412031.I02 PK 3/5 3/13/03 9:18 PM Page 57
Engineering Reference V Series
T Series
Specifications
Specifications
DIN VDE 0627/86 DIN VDE 0110/02.79 DIN VDE 0110-1/04.97 IEC 60-664-1, DIN/IEC 512
DIN VDE 0627/86 DDIN VDE 0110/02.79 DIN VDE 0110-1/04.97 IEC 60-664-1, DIN/IEC 512
Approvals
Approvals MEIE, EZU, SEV
®
Inserts
®
MEIE, EZU, SEV
Inserts
Contacts ( +Ground )
3, 6, 10, 16, 20 (2x10) 26 (10+16), 32 (2x16). 16A max. 600Vac, Switch contacts 400 Vac 3 kV eff. 3 Glass Filled Thermoplastic -40C/ -40F to +125C /+257 °F UL94 V-0
Working current Rated Voltage Test Voltage Pollution Degree Material Temperature Range Flammability
Contacts
Contacts ( +Ground )
6, 10, 16, 24
Working current Rated Voltage Test Voltage Pollution Degree Material Temperature Range Flammability
16A max. 600Vac, Switch contacts 400Vac 3 kV eff. 3 Hi-Temp Thermoplastic -40C/ -40F to +200C /+392 °F UL94 V-0
I
Contacts Solid drilled Copper alloy Hard Silver Plated Hard Gold Plated available ) 1 milliohm Wire AWG: 20-14 AWG (0.5-2.5mm) 20-12 AWG (0.5-2.5mm)
Contact Resistance Screw Terminals: + with Wire Protection Crimp Terminals:
Housings
Contact Resistance Screw Terminals: + with Wire Protection
Solid drilled Copper alloy Hard Silver Plated Hard Gold Plated available ) 1 milliohm Wire AWG: 20-14 AWG (0.5-2.5mm)
Housings
Materials: (EPDM Seal Gaskets) Locking Mechanisms: > Single Locking Levers
Die Cast Aluminum alloy Epoxy Powder Coat Finish @ V3, 6, 10, 16, 20, 26, 32 Steel, Zinc & Chrome Plated @ V3, 6, 10, 16 Stainless Steel w/high impact Thermoplastic Split Grips
> Double Locking Levers
Temperature Range Internal Protection
-40C/ -40F to +125C /+257 °F IP65 Locked Positions per DIN VDE 0470, IEC 529
Thermal Capacity
Materials: (Viton® Seal Gaskets) Locking Mechanisms: > Single Locking Levers > Double Locking Levers
Temperature Range Internal Protection
Thermal Capacity
Conductor size 1.5mm
Rated operating current per contact ( A )
Material Surface
Pos-E-Kon ™
Material Surface
2
Conductor size 2.5mm
Copper-Free Die Cast Aluminum alloy Green Epoxy Powder Coating @T6 Stainless Steel, Black Coated @ T10, 16, 24 Stainless Steel, with High Temp Thermoplastic Grips
-40C/ -40F to +200 °C /+392 °F IP65 Locked Positions per DIN VDE 0470, IEC 529 per DIN/IEC 512
2
16 14 12 BV 3
10
BV 3
8 BV 6
BV 6 6
BV 10 BV 16
4 BV 10 BV 16
2 0
20
40 60 80 100 120 0
20
40 60 80
100 120
Ambient temperature ( ° C )
© 2002 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
I 57
412031.I02 PK 3/5 3/13/03 9:18 PM Page 58
Dimensions Mounting Dimensions for Double Lever Box Bases
G
D E F
A B C
HOUSING SERIES A, B, T, K
C, V
A32
D50
B10, T10
V3
B16, T16
C6, V6
B24, T24, K12
Pos-E-Kon ™
I
B32
D
CAT. NO.
DD
BB_32A__
D40
DD72 M5
V10, V16 D64 DD108 M7 C12
DIMENSIONS ARE IN INCHES / (MILLIMETERS)
M
DD42 M3
D80 DD144
.216"
A
B
C
D
E
F
G
3.70 / (94)
4.17 / (106)
5.04 / (128)
1.81 / (46)
2.20 / (56)
2.76 / (70)
3.40 / (86.5)
BB_10E
3.23 / (82)
3.66 / (93)
4.33 / (110)
1.57 / (40)
2.05 / (52)
2.28 / (58)
2.05 / (52)
BB_10EH__
3.23 / (82)
3.66 / (93)
4.33 / (110)
1.77 / (45)
2.24 / (57)
2.28 / (58)
2.92 / (74)
BB_16E
4.13 / (105)
4.61 / (117)
5.16 / (131)
1.77 / (45)
2.24 / (57)
2.28 / (58)
2.68 / (68)
BB_16EH__
4.13 / (105)
4.61 / (117)
5.16 / (131)
1.77 / (45)
2.24 / (57)
2.28 / (58)
3.31 / (84)
BB_24E
5.20 / (132)
5.67 / (144)
6.18 / (157)
1.77 / (45)
2.24 / (57)
2.28 / (58)
2.68 / (68)
BB_24EH__
5.20 / (132)
5.67 / (144)
6.18 / (157)
1.77 / (45)
2.24 / (57)
2.28 / (58)
3.31 / (84)
BB_32E
4.41 / (112)
4.88 / (124)
5.28 / (134)
2.64 / (67)
3.20 / (81.5)
3.62 / (92)
2.83 / (72)
H - HIGH PROFILE
Mounting Dimensions for Single Lever Box Bases E Pg 11
5.5
Right Angle Housing A3/A4 D7/D8 Only
G
A B .Ø 0.125"
A B
F C
D E
HOUSING SERIES A, B, T, K
C, V
D
CAT. NO. A
B
C
D
E
F
1.10 / (28)
1.59 / (40.5)
1.00 / (25.5)
1.42 / (36)
1.18 / (30)
1.50 / (38)
D15
BB_10A
1.89 / (48)
–
3.66 / (93)
1.57 / (40)
1.97 / (50)
2.32 / (59)
2.05 / (52)
D25
BB_16A
2.52 / (64)
–
4.29 / (109)
1.57 / (40)
1.97 / (50)
2.32 / (59)
2.24 / (57)
D7, D8
A10 A16
M
B16, T16 B24, T24, K12 B48, K24 V32
V3
C6, V6
G
2.76 / (70)
3.31 / (84)
–
1.57 / (40)
2.05 / (52)
2.72 / (69)
2.05 / (52)
DD24 M2 BB_06H075
2.76 / (70)
3.31 / (84)
–
1.77 / (45)
2.24 / (57)
2.72 / (69)
2.92 / (74)
BB_06H100
2.76 / (70)
3.31 / (84)
–
1.77 / (45)
2.24 / (57)
2.72 / (69)
2.92 / (74)
BB_10
3.23 / (82)
3.66 / (93)
–
1.57 / (40)
2.05 / (52)
2.80 / (71)
2.05 / (52)
DD42 M3 BB_10H075
3.23 / (82)
3.66 / (93)
–
1.77 / (45)
2.24 / (57)
2.80 / (71)
2.92 / (74)
BB_10H100
3.23 / (82)
3.66 / (93)
–
1.77 / (45)
2.24 / (57)
2.80 / (71)
2.92 / (74)
BB_16
4.13 / (105)
4.61 / (117)
–
1.77 / (45)
2.24 / (57)
2.91 / (74)
2.68 / (68)
BB_16H___
4.13 / (105)
4.61 / (117)
–
1.77 / (45)
2.24 / (57)
2.91 / (74)
3.31 / (84)
BB_06 B6, T6
B10, T10
DIMENSIONS ARE IN INCHES / (MILLIMETERS)
BB403A(P)
A3, A4
DD
.177" A series .216" B series
F
D
D40
DD72 M5
V10, V16 D64
DD108 M7
V20, V26, D128 DD216
BB_24
5.20 / (132)
5.67 / (144)
–
1.77 / (45)
2.24 / (57)
2.91 / (74)
2.68 / (68)
BB_24H___
5.20 / (132)
5.67 / (144)
–
1.77 / (45)
2.24 / (57)
2.91 / (74)
3.31 / (84)
BB_48
4.37 / (111)
5.71 / (145)
–
4.17 / (106)
4.72 / (120)
6.18 / (157)
3.94 / (100)
SUFFIX: A - ALUMINUM, AP - PLASTIC, H - HIGH PROFILE
I 58
© 2002 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412031.I02 PK 3/5 3/13/03 9:18 PM Page 59
Dimensions Mounting Dimensions for Double Lever Panel Bases G A B
D E F
C
HOUSING SERIES A, B, T, K
C, V
A32
D
CAT. NO. DD
B10, T10
V3
B16, T16
C6, V6
DIMENSIONS ARE IN INCHES / (MILLIMETERS)
M
D50
PB132A
.177" .216" B32 series
A
B
C
D
E
F
G
3.62 / (92)
4.02 / (102)
5.04 / (128)
1.65 / (28)
2.24 / (57)
2.76 / (70)
1.10 / (28)
DD42
M3
PB110E
3.27 / (83)
3.66 / (93)
4.33 / (110)
1.26 / (32)
1.69 / (43)
2.28 / (58)
1.06 / (27)
D40
DD72
M5
PB116E
4.05 / (103)
4.49 / (114)
5.16 / (131)
1.26 / (32)
1.69 / (43)
2.28 / (58)
1.06 / (27)
B24, T24, V10, V16 D64 K12
DD108
M7
PB124E
5.12 / (130)
5.51 / (140)
6.19 / (157)
1.26 / (32)
1.69 / (43)
2.28 / (58)
1.06 / (27)
PB132E
4.33 / (110)
4.88 / (124)
5.28 / (134)
2.56 / (65)
3.11 / (79)
3.62 / (92)
1.18 / (30)
B32
C12
D80
DD144
Mounting Dimensions for Single Lever Panel Bases
I 3
G
B
D
C
E
G A B
.Ø 0.125"
A series .134" B series .177" B48 series .248"
F
HOUSING SERIES A, B, T, K
C, V
D
CAT. NO. DD
M PB303A (P)
A3, A4
D7, D8
A10
A16
D25
B6, T6
DD24
M2
DD42
M3
M5
B10, T10
V3
B16, T16
C6, V6
D40
DD72
V10, V16
D64
DD108 M7
V20, V26,
D128 DD216
B24, T24, K12 B48, K24 V32
F
DIMENSIONS ARE IN INCHES / (MILLIMETERS) A
B
C
D
E
F
G
–
1.10 / (28)
1.34 / (34)
1.18 / (30)
1.50 / (38)
1.67 / (42.5)
.95 / (24) .95 / (24)
–
1.10 / (28)
1.38 / (35)
1.18 / (30)
1.58 / (40)
1.85 / (47)
PB503A (P)
1.10 / (28)
1.59 / (40.5)
1.00 / (25.5)
1.42 / (36)
1.18 / (30)
1.50 / (38)
PB403A (P)
D15
D E
PB310A
2.76 / (70)
3.19 / (81)
–
.68 / (17.5)
1.20 / (30.5)
1.93 / (49)
1.02 / (26)
PB410A
2.76 / (70)
3.19 / (81)
–
.68 / (17.5)
1.20 / (30.5)
2.95 / (75)
1.02 / (26)
PB316A
3.39 / (86)
3.78 / (96)
–
.68 / (17.5)
1.20 / (30.5)
1.93 / (49)
1.02 / (26)
PB416A
3.39 / (86)
3.78 / (96)
–
.68 / (17.5)
1.20 / (30.5)
2.95 / (75)
1.02 / (26)
PB306
2.76 / (70)
3.15 / (80)
–
1.26 / (32)
1.69 / (43)
2.56 / (65)
1.06 / (27)
PB406
2.76 / (70)
3.15 / (80)
–
1.26 / (32)
1.69 / (43)
3.54 / (90)
1.06 / (27)
PB310
3.27 / (83)
3.66 / (93)
–
1.26 / (32)
1.69 / (43)
2.64 / (67)
1.06 / (27)
PB410
3.27 / (83)
3.66 / (93)
–
1.26 / (32)
1.69 / (43)
3.62 / (92)
1.06 / (27)
PB316
4.06 / (103)
4.49 / (114)
–
1.26 / (32)
1.69 / (43)
2.64 / (67)
1.06 / (27)
PB416
4.06 / (103)
4.49 / (114)
–
1.26 / (32)
1.69 / (43)
3.62 / (92)
1.06 / (27)
PB324
5.12 / (130)
5.51 / (140)
–
1.26 / (32)
1.69 / (43)
2.64 / (67)
1.06 / (27)
PB424
5.12 / (130)
5.51 / (140)
–
1.26 / (32)
1.69 / (43)
3.62 / (92)
1.06 / (27)
PB348
5.83 / (148)
6.50 / (165)
–
2.76 / (70)
3.54 / (90)
6.18 / (157)
1.61 / (41)
PB448
5.83 / (148)
6.50 / (165)
–
2.76 / (70)
3.54 / (90)
6.81 / (173)
1.61 / (41)
SUFFIX: A - ALUMINUM, P - PLASTIC
© 2002 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
I 59
Pos-E-Kon ™
A3/A4 D7/D8 Only
412031.I02 PK 3/5 3/13/03 9:18 PM Page 60
Dimensions Mounting Dimensions for Screw and Crimp Terminal Inserts
E
A
C D
B
INSERT SERIES A, B, T, K
C, V
D
MATING DD
M
A3, A4
BOTH D7, D8
Pos-E-Kon ™
I
A10
D15
A16
D25
A32
D50
B6, T6
DD24 M2
B10, T10
V3
B16, T16
C6, V6
D40
DD72 M5
V10, V16
D64
DD108 M7
C12
D80
DD144
D128
DD216
B24, T24, K12 B32
B48, K24
I 60
V20, V26, V32
DD42 M3
DIMENSIONS ARE IN INCHES / (MILLIMETERS) A
B
C
D
E
–
.83 / (21)
–
.83 / (21))
.98 / (25)
FEMALE
–
.83 / (21)
–
.83 / (21)
1.25 / (31.8)
MALE
–
.83 / (21)
–
.83 / (21)
1.19 / (30.2)
FEMALE
1.95 / (49.5)
2.22 / (56.5)
.63 / (16)
1.34 / (34)
1.14 / (29)
MALE
1.95 / (49.5)
2.22 / (56.5)
.63 / (16)
1.34 / (34)
1.26 / (32)
FEMALE
2.60 / (66)
2.87 / (73)
.63 / (16)
1.34 / (34)
1.14 / (29)
MALE
2.60 / (66)
2.87 / (73)
.63 / (16)
1.34 / (34)
1.26 / (32)
FEMALE
2.60 / (66)
2.87 / (73)
.63 / (16) x 2
1.34 / (34)
1.14 / (29)
MALE
2.60 / (66)
2.87 / (73)
.63 / (16) x 2
1.34 / (34)
1.26 / (32)
FEMALE
1.73 / (44)
2.01 / (51)
1.063 / (27)
1.34 / (34)
1.46 / (37)
MALE
1.73 / (44)
2.01 / (51)
1.063 / (27)
1.34 / (34)
1.38 / (35)
FEMALE
2.24 / (57)
2.52 / (64)
1.063 / (27)
1.34 / (34)
1.46 / (37)
MALE
2.24 / (57)
2.52 / (64)
1.063 / (27)
1.34 / (34)
1.38 / (35)
FEMALE
3.05 / (77.5)
3.33 / (84.5)
1.063 / (27)
1.34 / (34)
1.48 / (37.5)
MALE
3.05 / (77.5)
3.33 / (84.5)
1.063 / (27)
1.34 / (34)
1.40 / (35.5)
FEMALE
4.09 / (104)
4.37 / (111)
1.063 / (27)
1.34 / (34)
1.48 / (37.5)
MALE
4.09 / (104)
4.37 / (111)
1.063 / (27)
1.34 / (34)
1.40 / (35.5)
FEMALE
3.05 / (77.5)
3.33 / (84.5)
1.063 / (27) x 2
1.34 / (34)
1.48 / (37.5)
MALE
3.05 / (77.5)
3.33 / (84.5)
1.063 / (27) x 2
1.34 / (34)
1.40 / (35.5)
FEMALE
4.09 / (104)
4.37 / (111)
1.063 / (27) x 2
1.34 / (34)
1.48 / (37.5)
MALE
4.09 / (104)
4.37 / (111)
1.063 / (27) x 2
1.34 / (34)
1.40 / (35.5)
© 2002 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412031.I02 PK 3/5 3/13/03 9:18 PM Page 61
Dimensions Insert Screw Torque Specifications SERIES
A3 A4 D7 D8
Screw Location wire termination screw
insert grounding screw
grounding screw
wire termination screw
A10 A16 A32
insert fastening screw insert grounding screw
D15 D25 D50
insert fastening screw insert grounding screw
B T V
insert fastening screw insert grounding screw
wire termination screw
C
insert fastening screw insert grounding screw
wire termination screw
K
insert fastening screw insert grounding screw
* 16A / 80A contacts
Pozi-Drive point Screwdriver
Std. Straight-blade Screwdriver
Newton meters
0.4
0.9
Inch ounces
57
127
Newton meters
0.6
0.8
Inch ounces
85
113
Newton meters
0.4
0.4
Inch ounces
57
57
Newton meters
0.4
0.9
Inch ounces
57
127
Newton meters
0.7
1.1
Inch ounces
99
156
Newton meters
0.7
1.3
Inch ounces
99
184
Newton meters
0.7
1.1
Inch ounces
99
156
Newton meters
0.7
1.3
Inch ounces
99
184
Newton meters
0.4
0.6
Inch ounces
57
85
Newton meters
0.7
1.1
Inch ounces
99
156
Newton meters
1.2
1.9
Inch ounces
170
269
Newton meters
0.7
1.3
Inch ounces
99
184
Newton meters
0.7
1.1
Inch ounces
99
156
Newton meters
2.3
2.3
Inch ounces
326
326
Newton meters
*0.5 / 1.4
-
Inch ounces
*71 / 198
-
Newton meters
0.7
-
Inch ounces
99
-
Newton meters
2.3
-
Inch ounces
326
-
I Pos-E-Kon ™
wire termination screw
Unit of Measure
(NOTE: Inch/ounces /16.0 = Pound /Inches)
Insert Mounting Screws accept a Pozi-drive screwdriver head. Common cross-point or bladed screwdrivers will also work. Specs refer to Pozi-drive or bladed common torque only.
© 2002 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
I 61
412031.I02 PK 3/5 3/13/03 9:18 PM Page 62
Dimensions Mounting Dimensions for Wiring Adapters
INSERT SERIES
DIMENSIONS ARE IN INCHES / (MILLIMETERS)
CAT. NO. A
B
C
D
E
F
G
H
1.73 / (44)
2.01 / (51)
1.03 / (26.3)
1.06 / (27)
1.34 / (34)
1.77 / (45)
2.28 / (58)
3.54 / (90)
2.13 / (54)
2.52 / (64)
1.55 / (39.5)
1.06 / (27)
1.34 / (34)
1.77 / (45)
2.28 / (58)
3.54 / (90)
3.05 / (77.5)
3.32 / (84.5)
2.33 / (59.3)
1.06 / (27)
1.34 / (34)
1.77 / (45)
2.28 / (58)
3.54 / (90)
4.09 / (104)
4.37 / (111)
3.36 / (85.7)
1.06 / (27)
1.34 / (34)
1.77 / (45)
2.28 / (58)
3.54 / (90)
3.05 / (77.5)
3.27 / (83)
2.21 / (56)
1.06 / (27)
1.34 / (34)
3.19 / (81)
4.53 / (115)
5.12 / (130)
4.09 / (104)
4.33 / (110)
3.39 / (86.3)
1.06 / (27)
1.34 / (34)
3.19 / (81)
4.53 / (115)
5.12 / (130)
FS106WAL
I
B6
FS106WAR
Pos-E-Kon ™
MS206WAL MS206WAR FS110WAL B10
FS110WAR MS210WAL MS210WAR FS116WAL
B16
FS116WAR MS216WAL MS216WAR FS124WAL
B24
FS124WAR MS224WAL MS224WAR
D40
D64
(-WAL) - GROUND LEFT
I 62
FS340WAL MS440WAL FS364WAL MS464WAL
(-WAR) - GROUND RIGHT
© 2002 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412031.I02 PK 3/5 3/13/03 9:18 PM Page 63
Dimensions Panel Cut Out Dimensions for Panel Bases
A3/A4 D7/D8 Only
HOUSING SERIES A, B, T, K
C, V
D
DIMENSIONS ARE IN INCHES / (MILLIMETERS) DD
M
A
B
C
D
E
A3, A4
D7, D8
.83 / (21)
1.18 / (30)
.83 / (21)
–
.125 / (3.2)
A10
D15
1.71 / (43.5)
2.76 / (70)
.95 / (24)
.68 / (17.5)
.134 / (3.4)
A16
D25
2.36 / (60)
3.39 / (86)
.95 / (24)
.68 / (17.5)
.134 / (3.4)
A32
D50
2.36 / (60)
3.62 / (92)
1.89 / (48)
1.65 / (28)
.177 / (4.5)
B6, T6
M2
1.42 / (36)
2.76 / (70)
1.38 / (35)
1.26 / (32)
.177 / (4.5)
M3
1.93 / (49)
3.27 / (83)
1.38 / (35)
1.26 / (32)
.177 / (4.5)
D40
DD72
M5
2.84 / (72)
4.06 / (103)
1.38 / (35)
1.26 / (32)
.177 / (4.5)
V10, V16
D64
DD108
M7
3.86 / (98)
5.12 / (130)
1.38 / (35)
1.26 / (32)
.177 / (4.5)
C12
D80
DD144
2.84 / (72)
4.33 / (110)
2.80 / (71)
2.56 / (65)
.216 / (5.5)
D128
DD216
3.86 / (98)
5.83 / (148)
2.80 / (71)
2.76 / (70)
.248 / (6.3)
V3
B16, T16
C6, V6
B24, T24, K12 B32 B48, K24
V20, V26, V32
I Pos-E-Kon ™
DD24 DD42
B10, T10
* Dimensions reflect dual inserts mounting.
© 2002 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
I 63
412031.I02 PK 3/5 3/13/03 9:18 PM Page 64
Dimensions Mounting Dimensions for Double Post Hoods
HOUSING SERIES A, B, T, K
C, V
A32
B10, T10
D
CAT. NO. DD
M
D50
V3
DD42
M3
Pos-E-Kon ™
I B16, T16
B24, T24, K12
B32
C6, V6
V10, V16
C12
D40
D64
D80
DD72
DD108
DD144
M5
M7
DIMENSIONS ARE IN INCHES / (MILLIMETERS) A
B
C
SH_32A
3.23 / (82)
2.21 / (56)
2.99 / (76)
TH_32A
3.23 / (82)
2.21 / (56)
2.99 / (76)
SH_10
2.87 / (73)
1.69 / (43)
2.05 / (52)
SH_10H___
2.87 / (73)
1.69 / (43)
2.05 / (52)
TH_10
2.87 / (73)
1.69 / (43)
2.05 / (52)
TH_10H___
2.87 / (73)
1.69 / (43)
2.05 / (52)
SH_16
3.70 / (94)
1.69 / (43)
2.56 / (65)
SH_16H
3.70 / (94)
1.69 / (43)
2.99 / (76)
SH_16L
3.70 / (94)
1.69 / (43)
2.36 / (60)
TH_16
3.70 / (94)
1.69 / (43)
2.56 / (65)
TH_16H
3.70 / (94)
1.69 / (43)
2.99 / (76)
TH_16L
3.70 / (94)
1.69 / (43)
2.36 / (60)
SH_24
4.72 / (120)
1.69 / (43)
2.36 / (60)
SH_24H
4.72 / (120)
1.69 / (43)
2.99 / (76)
TH_24
4.72 / (120)
1.69 / (43)
2.21 / (56)
TH_24H
4.72 / (120)
1.69 / (43)
2.99 / (76)
TH424RC
4.72 / (120)
1.69 / (43)
2.99 / (76)
SH_32
3.70 / (94)
3.11 / (79)
3.15 / (80)
TH_32
3.70 / (94)
3.11 / (79)
3.15 / (80)
SUFFIX: A - ALUMINUM, AP - PLASTIC, H - HIGH PROFILE, L - LOW PROFILE, RC - RIBBON CABLE (TOP)
I 64
© 2002 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412031.I02 PK 3/5 3/13/03 9:18 PM Page 65
Dimensions Mounting Dimensions for Single Post Hoods
HOUSING SERIES A, B, T, K
C, V
A3, A4
D
D25
B24, T24 K12
DD24
V3
C6, V6
V10, V16
DD42
D40
D64
DD72
DD108
M2
M3
M5
M7
V20, V26, B48, K24
V32
D128
DD216
A
B
C
SH603A(P)
1.04 / (26.5)
1.04 / (26.5)
1.89 / (48)
TH803A(P)
1.04 / (26.5)
1.04 / (36.5)
1.89 / (48)
SH_10A
2.48 / (63)
1.42 / (36)
2.60 / (66)
SH_10AL
2.48 / (63)
1.16 / (29.5)
2.09 / (53)
TH_10A
2.48 / (63)
1.42 / (36)
2.60 / (66)
TH_10AL
2.48 / (63)
1.16 / (29.5)
2.09 / (53)
SH_16A
3.13 / (79.5)
1.42 / (36)
2.84 / (72)
SH_16AL
3.13 / (79.5)
1.16 / (29.5)
2.28 / (58)
TH_16A
3.13 / (79.5)
1.42 / (36)
2.84 / (72)
TH_16AL
3.13 / (79.5)
1.16 / (29.5)
2.28 / (58)
SH_606
2.36 / (60)
1.69 / (43)
1.69 / (43)
SH_606Hxxx
2.36 / (60)
1.69 / (43)
2.84 / (72)
TH_806
2.36 / (60)
1.69 / (43)
1.69 / (43)
TH_806Hxxx
2.36 / (60)
1.69 / (43)
2.84 / (72)
SH_610
2.87 / (73)
1.69 / (43)
2.05 / (52)
SH_610Hxxx
2.87 / (73)
1.69 / (43)
2.84 / (72)
TH_810
2.87 / (73)
1.69 / (43)
2.05 / (52)
TH_810Hxxx
2.87 / (73)
1.69 / (43)
2.84 / (72)
SH_616
3.70 / (94)
1.69 / (43)
2.56 / (65)
SH_616H
3.70 / (94)
1.69 / (43)
2.99 / (76)
SH_616L
3.70 / (94)
1.69 / (43)
2.36 / (60)
TH_816
3.70 / (94)
1.69 / (43)
2.56 / (65)
TH_816H
3.70 / (94)
1.69 / (43)
2.99 / (76)
TH_816L
3.70 / (94)
1.69 / (43)
2.36 / (60)
TH816RC
3.70 / (94)
1.69 / (43)
2.99 / (76)
SH_624
4.72 / (120)
1.69 / (43)
2.99 / (76)
SH_624L
4.72 / (120)
1.69 / (43)
2.36 / (60)
TH_824
4.72 / (120)
1.69 / (43)
2.99 / (76)
TH824L
4.72 / (120)
1.69 / (43)
2.36 / (60)
TH624RC
4.72 / (120)
1.69 / (43)
2.99 / (76)
SH_48
5.16 / (131.5)
3.50 / (89)
3.78 / (96)
TH_48
5.16 / (131.5)
3.50 / (89)
3.78 / (96)
I Pos-E-Kon ™
B6, T6
DIMENSIONS ARE IN INCHES / (MILLIMETERS)
M
D15
A16
B16, T16
DD
D7, D8
A10
B10, T10
CAT. NO.
SUFFIX: AP - PLASTIC, H - HIGH PROFILE, L - LOW PROFILE, RC - RIBBON CABLE (TOP ENTRY ONLY)
© 2002 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
I 65
412031.I02 PK 3/5 3/13/03 9:18 PM Page 66
Dimensions Mounting Dimensions for Double Lever Coupler Hoods
HOUSING SERIES A, B, T, K B10, T10
B16, T16
B24, T24,
Pos-E-Kon ™
I
K12 B32
C, V
D
V3
C6, V6
CAT. NO.
DD
M
DD42
D40 DD72
M3
M5
V10, V16 D64 DD108 M7 C12
D80 DD144
DIMENSIONS ARE IN INCHES / (MILLIMETERS) A
B
C
D
E
CH610E
2.87 / (73)
4.33 / (110)
1.69 / (43)
2.28 / (58)
2.02 / (51.5)
CH610EHxxx
2.87 / (73)
4.33 / (110)
1.69 / (43)
2.28 / (58)
2.87 / (73)
CH_16E
3.70 / (94)
5.16 / (131)
1.69 / (43)
2.28 / (58)
2.72 / (69)
CH_16EH
3.70 / (94)
5.16 / (131)
1.69 / (43)
2.28 / (58)
3.15 / (80)
CH616ERC
3.70 / (94)
5.16 / (131)
1.69 / (43)
2.28 / (58)
3.15 / (80)
CH_24E
4.72 / (120)
6.18 / (157)
1.69 / (43)
2.28 / (58)
3.15 / (80)
CH624ERC
4.72 / (120)
6.18 / (157)
1.69 / (43)
2.28 / (58)
3.15 / (80)
CH_32E
3.70 / (94)
5.28 / (134)
3.11 / (79)
3.62 / (92)
3.23 / (82)
H - HIGH PROFILE, RC - RIBBON CABLE (TOP ENTRY)
Mounting Dimensions for Single Lever Coupler Hoods
A3/A4 D7/D8 Only
HOUSING SERIES A, B, T, K
C, V
D
CAT. NO. DD
M
DIMENSIONS ARE IN INCHES / (MILLIMETERS) A
B
C
D
E
A3, A4
D7, D8
CH803A(P)
1.34 / (34)
–
1.04 / (26.5)
1.43 / (36.5)
2.02 / (51.5)
A10
D15
CH810A
2.48 / (63)
–
1.16 / (29.5)
1.92 (49)
1.89 / (48)
A16
D25
CH816A
3.13 / (79.5)
–
1.16 / (29.5)
1.92 (49)
2.09 / (53)
2.36 / (60)
–
1.69 / (43)
2.56 / (65)
2.02 / (51.5)
B6, T6
B10, T10
B16, T16
B24, T24, K12
DD24 M2
V3
C6, V6
V10, V16
DD42 M3
D40
D64
DD72 M5
DD108 M7
CH806 CH806Hxxx
2.36 / (60)
–
1.69 / (43)
2.56 / (65)
2.87 / (73)
CH810
2.87 / (73)
–
1.69 / (43)
2.64 / (67)
2.02 / (51.5)
CH810Hxxx
2.87 / (73)
–
1.69 / (43)
2.64 / (67)
2.87 / (73)
CH_16
3.70 / (94)
–
1.69 / (43)
2.64 / (67)
2.72 / (69)
CH_16H
3.70 / (94)
–
1.69 / (43)
2.64 / (67)
3.15 / (80)
CH616RC
3.70 / (94)
–
1.69 / (43)
2.64 / (67)
3.15 / (80)
CH_24
4.72 / (120)
–
1.69 / (43)
2.64 / (67)
3.15 / (80)
CH824RC
4.72 / (120)
–
1.69 / (43)
2.64 / (67)
3.15 / (80)
SUFFIX: A - ALUMINUM, AP - PLASTIC, H - HIGH PROFILE, L - LOW PROFILE, RC - RIBBON CABLE (TOP ENTRY ONLY)
I 66
© 2002 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412031.I02 PK 3/5 3/13/03 9:18 PM Page 67
Dimensions Mounting Dimensions for Double Post Box Bases (Reverse Locking)
HOUSING SERIES A, B, T, K
C, V
A32
B10, T10
B16, T16
K12
DD
M
V3
DD42 M3
C6, V6
D40
A
B
C
D
E
F
3.70 / (94)
4.17 / (106)
1.81 / (46)
2.32 / (59)
3.11 / (79)
3.20 / (81.5)
BB_32A100
3.70 / (94)
4.17 / (106)
1.81 / (46)
2.32 / (59)
3.11 / (79)
3.20 / (81.5)
BB_10
3.23 / (82)
3.66 / (93)
1.56 / (40)
2.05 / (52)
2.87 / (73)
2.05 / (52)
BB_32A
D50
DD72 M5
V10, V16 D64 DD108 M7
DIMENSIONS ARE IN INCHES / (MILLIMETERS)
BB_10H___
3.23 / (82)
3.66 / (93)
1.77 / (45)
2.24 / (57)
2.97 / (75.5)
2.91 / (74)
BB_16
4.13 / (105)
4.61 / (117)
1.77 / (45)
2.24 / (57)
2.97 / (75.5)
2.68 / (68)
BB_16H___
4.13 / (105)
4.61 / (117)
1.77 / (45)
2.24 / (57)
2.97 / (75.5)
3.31 / (84)
BB_24
5.20 / (132)
5.67 / (144)
1.77 / (45)
2.24 / (57)
2.97 / (75.5)
2.68 / (68)
BB_24H___
5.20 / (132)
5.67 / (144)
1.77 / (45)
2.24 / (57)
2.97 / (75.5)
3.31 / (84)
I Pos-E-Kon ™
B24, T24,
D
CAT. NO.
H - HIGH PROFILE
Mounting Dimensions for Double Post Panel Bases (Reverse Locking)
HOUSING SERIES A, B, T, K
C, V
A32
M
DIMENSIONS ARE IN INCHES / (MILLIMETERS) A
B
C
D
E
F
PB232A
3.62 / (92)
4.02 / (102)
1.65 / (42)
2.24 / (57)
3.15 / (80)
1.10 / (28)
DD42 M3
PB210
3.27 / (83)
3.66 / (93)
1.26 / (32)
1.69 / (43)
2.68 / (68.5)
1.06 / (27)
DD72 M5
PB216
4.06 / (103)
4.49 / (114)
1.26 / (32)
1.69 / (43)
2.68 / (68.5)
1.06 / (27)
V10, V16 D64 DD108 M7
PB224
5.12 / (130)
5.51 / (140)
1.26 / (32)
1.69 / (43)
2.68 / (68.5)
1.06 / (27)
V3
B16, T16
C6, V6
K12
DD
D50
B10, T10
B24, T24,
D
CAT. NO.
D40
© 2002 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
I 67
412031.I02 PK 3/5 3/13/03 9:18 PM Page 68
Dimensions Mounting Dimensions for Double Lever Hoods (Reverse Locking)
HOUSING SERIES A, B, T, K
C, V
D
A32 V3
B16, T16
C6, V6
V10, V16
DIMENSIONS ARE IN INCHES / (MILLIMETERS)
M
DD42
M3
D40
DD72
M5
D64
DD108
M7
A
B
C
D
E
LH_32A
3.23 / (82)
5.04 / (128)
2.21 / (56)
2.76 / (70)
2.99 / (76)
LH_10E
2.87 / (73)
4.33 / (110)
1.69 / (43)
2.28 / (58)
1.89 / (48)
LH_10EH___
2.87 / (73)
4.33 / (110)
1.69 / (43)
2.28 / (58)
2.84 / (72)
LH_16E
3.70 / (94)
5.16 / (131)
1.69 / (43)
2.28 / (58)
2.56 / (65)
LH_16EH
3.70 / (94)
5.16 / (131)
1.69 / (43)
2.28 / (58)
2.99 / (76)
LH_24E
4.72 / (120)
6.18 / (157)
1.69 / (43)
2.28 / (58)
2.99 / (76)
H - HIGH PROFILE
Pos-E-Kon ™
I
K12
DD
D50
B10, T10
B24, T24,
CAT. NO.
Dust Covers for Housings
HOUSING SERIES A, B, T, K
C, V
D
DD
M
FOR SINGLE LEVER HOUSINGS
A3, A4
D7, D8
DCL103A-1
A10
D15
DCL110A-1
A16
D25
DCL116A-1
A32
D50
B6, T6 ❑ B10, T10 ❑
V3
FOR DOUBLE LEVER HOUSINGS
FOR SINGLE POST HOUSINGS
DCS110A-1 DCS116A-1 DCL232A-1/DCL432A-1*
DD24
M2
DCL106B-1
DD42
M3
DCL110B-1
FOR DOUBLE POST HOUSINGS
DCS232A-1
DCL210B-1/DCL410B-1*
B16, T16 ❑
C6, V6
D40
DD72
M5
DCL116B-1
DCL216B-1/DCL416B-1*
B24, T24 ❑, K12
V10, V16
D64
DD108
M7
DCL124B-1
DCL224B-1/DCL424B-1*
(*) COMES WITH GASKET FOR HOODS W/LEVERS AND W/O GASKETS ❑ DUST COVERS TESTED ONLY TO 125°C (IF APPLIED TO 200°C SERIES T)
I 68
© 2002 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412031.I02 PK 3/5 3/13/03 9:18 PM Page 69
Dimensions Sub-Miniature Adapter Plate Selection Guide HOUSING SERIES A, B, T, K
C, V
D
DD
A3, A4
D7, D8
A10
D15
A16
D25
A32
D50
B6, T6
DD24
B10, T10
V3
B16, T16
C6, V6
B24, T24, K12 B32 B48, K24
SUB-MINIATURE CONNECTOR M
DB9
DB15
DB25
AP681A10
AP677A10
DB37
DB50
NO ADAPTER FOR THIS SERIES AP678A10 AP682A16
M2
AP796B6
AP797B6
AP802B6*
AP803B6*
AP683A16
AP798B10
DD42
M3
D40
DD72
M5
V10, V16
D64
DD108
M7
C12
D80
DD144
N/A
V20, V26, V32
D128
DD216
N/A
AP804B10* AP799B16
AP800B16
AP805B16*
AP806B16*
N/A
* DUAL MOUNTING
I Sub-Miniature Adapter Plate Mounting Dimensions Pos-E-Kon ™
A B
A B D C
D C
* DUAL MOUNTING
DIMENSIONS ARE IN INCHES / (MILLIMETERS) CAT. NO.
A
B
C
D
AP677A10
2.22 / (56.5)
.91 / (23)
1.95 / (49.5)
.63 / (16)
AP678A10
2.22 / (56.5)
.91 / (23)
1.95 / (49.5)
.63 / (16)
AP681A10
2.22 / (56.5)
.91 / (23)
1.95 / (49.5)
.63 / (16)
AP682A16
2.87 / (73)
.91 / (23)
2.60 / (66)
.63 / (16)
AP683A16
2.87 / (73)
.91 / (23)
2.60 / (66)
.63 / (16)
AP796B6
2.03 / (51.5)
1.73 / (44)
1.36 / (34.5)
1.06 / (27)
AP797B6
2.03 / (51.5)
1.73 / (44)
1.36 / (34.5)
1.06 / (27)
AP798B10
2.54 / (64.5)
2.24 / (57)
1.36 / (34.5)
1.06 / (27)
AP799B16
3.35 / (85)
3.05 / (77.5)
1.36 / (34.5)
1.06 / (27)
AP800B16
3.35 / (85)
3.05 / (77.5)
1.36 / (34.5)
1.06 / (27)
AP802B6*
2.03 / (51.5)
1.73 / (44)
1.36 / (34.5)
1.06 / (27)
AP803B6*
2.03 / (51.5)
1.73 / (44)
1.36 / (34.5)
1.06 / (27)
AP804B10*
2.54 / (64.5)
2.24 / (57)
1.36 / (34.5)
1.06 / (27)
AP805B16*
3.35 / (85)
3.05 / (77.5)
1.36 / (34.5)
1.06 / (27)
AP806B16*
3.35 / (85)
3.05 / (77.5)
1.36 / (34.5)
1.06 / (27)
* DUAL MOUNTING
© 2002 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
I 69
412031.I02 PK 3/5 3/13/03 9:18 PM Page 70
Dimensions Size Adapter Plate: Selection Guide for Panel Installation D B
C A
DIMENSIONS ARE IN INCHES / (MILLIMETERS) NOTE: ADAPTER PLATES ARE FOR USE WITH PANEL BASES IN SERIES B24, D64, DD108, M7, V10, AND V16
ADAPTER SIZE
CAT. NO.
B24 TO B6
A
B
C
D
AP650B6
5.90 / (150)
2.05 / (52)
5.12 / (130)
1.26 / (32)
B24 TO B10
AP651B10
5.90 / (150)
2.05 / (52)
5.12 / (130)
1.26 / (32)
B24 TO B16
AP652B16
5.90 / (150)
2.05 / (52)
5.12 / (130)
1.26 / (32)
Cover Plate Selection Guide D C
B A
Pos-E-Kon ™
I
HOUSING SERIES A, B, T, K
C, V
CAT. NO.
D
DD
DIMENSIONS ARE IN INCHES / (MILLIMETERS)
M
A
B
C
D
A3, A4
D7, D8
A10
D15
CP684A10
3.43 / (87)
2.76 / (70)
1.57 / (40)
.69 / (17.5)
A16
D25
CP685A16
3.94 / (100)
3.39 / (86)
1.77 / (45)
.69 / (17.5)
B6, T6 B10, T10
V3
DD24
M2
CP638B6
3.39 / (86)
2.76 / (70)
2.05 / (52)
1.26 / (32)
DD42
M3
CP639B10
4.02 / (102)
3.27 / (83)
2.05 / (52)
1.26 / (32)
B16, T16
C6, V6
D40
DD72
M5
CP640B16
4.84 / (123)
4.06 / (103)
2.05 / (52)
1.26 / (32)
B24, T24, K12
V10, V16
D64
DD108
M7
CP641B24
5.91 / (150)
5.12 / (130)
2.05 / (52)
1.26 / (32)
NOTE: COVER PLATES ARE FOR USE ON PANEL BASES ONLY
Gaskets HOUSING SERIES A, B, T, K
C, V
D
CAT. NOS. DD
M
PANEL BASE, FLAT
*MOLDED EDGE CONTOUR
A3, A4
D7, D8
A04XFGP
A04XMEC
A10
D15
A10XFGP
A10XMEC
A16
D25
A16XFGP
A16XMEC
A32
D50
B6, T6 ❑
DD24
A32XFGP
A32XMEC
M2
B6XFGP
B6XMEC
B10, T10 ❑
V3
DD42
M3
B10XFGP
B10XMEC
B16, T16 ❑
V6, C6
D40
DD72
M5
B16XFGP
B16XMEC
B24, T24 ❑, K12
V10, V16
D64
DD108
M7
B24XFGP
B24XMEC
B32
C12
D80
DD144
B32XFGP
B32XMEC
B48, K24
V20, V26, V32
D128
DD216
B48XFGP
B48XMEC
* INSTALL WITH SILICONE SEALANT/ADHESIVE FOR INDUSTRIAL USE. ❑ FOR T SERIES 200°C APPLICATIONS, SPECIFY CATALOG NUMBER AT RIGHT EXCEPT “T” PREFIX INSTEAD OF “B” FOR GASKETS. EX: USE “T16XFGP” FOR PANEL BASE GASKETS.
I 70
© 2002 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412031.I02 PK 3/5 3/13/03 9:18 PM Page 71
Multiple InstallationTable Coding of Contents Options Coding Pins, Guide Pins and Sleeves can be used in all series housings, with all inserts. Coding Pin
Coding Pins: Used for rejection in multiple “same size or series” insert/hood installations. Patterns show examples of rejection coding pins installed.
PC600
Coding possibilities for single insert series
1 F
M
F
4
3
2 F
M
M
6
5
F
M
F
M
F
M
Coding possibilities for double insert series 1 F
F
2 M
M
F
F
3 M
M
F
F
4 M
F
M
F
5 M
M
F
F
6 M
F
M
F
M
M
I Pos-E-Kon ™
Guide Pin
Guide Sleeve
Guide Pins and Sleeves: Perform same function as coding pins and/or aid hi-density insert mating as well.
FG602
MG601
Coding possibilities for single insert series
1 F
F
M
4
3
2 M
F
M
F
F
M
7
6
5 M
F
F
M
M
Coding possibilities for double insert series
1 F
F
2 M
M
F
F
3 M
M
F
F
4 M
M
F
F
5 M
M
F
F
6 M
M
F
F
M
M
– Male Guide Pins or Coding Pins – Female Guide Sleeves – Mounting Screw
© 2002 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
I 71
412031.I02 PK 3/5 3/13/03 9:18 PM Page 72
Table of Cable and Contents Conduit Entry Metric PG-to-N.P.T. Thread Adapters Cat. No.
Supplied standard with all hoods and bases. Special sizes/hood combinations available.
N.P.T. Thread (mating)
Thread (at housing)
c" d" f" 1" 1b" 1b" 1d" 2"
PG11 PG16 PG21 PG29 PG29 PG36 PG36 PG42
PG11-38 PG16-50 PG21-75 PG29-100 PG29-125 PG36-125 PG36-150 PG42-200
Metric Two-Screw Clamp Connectors Cable O.D. (in.)
Style may vary depending on size.
Pos-E-Kon ™
I
Cat. No.
Min.
Max.
Thread (at housing)
CC11-38 CC11-38P* CC135-50 CC16-50 CC21-75 CC29-100 CC36-125 CC42-150
.400" .250" .400" .455" .513" .800" 1.050" 1.500"
.470" .325" .535" .625" .815" .175" .450" .800"
PG11 PG11 PG13.5 PG16 PG21 PG291 PG361 PG421
* Plastic
Metric Cord Grip Connectors Cable O.D. (in.)
Standard European style – can be specified/supplied with hoods and bases.
Cat. No.
Min.
Max.
Thread (at housing)
CG11-38 CG11-38P* CG135-50 CG16-50 CG21-75 CG29-100 CG36-125 CG42-150
.200" .325" .285" .285" .395" .780" .960" 1.630"
.470" .340" .545" .625" .790" .060" .375" .650"
PG11 PG11 PG13.5 PG16 PG21 PG291 PG361 PG421
* Plastic
Conduit Entry Blind Plug
I 72
Cat. No.
Thread (at housing)
CXP722 CXP723 CXP724 CXP725 CXP726 CXP727
PG13.5 PG16 PG21 PG29 PG36 PG42
© 2002 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412031.I02 PK 3/5 3/13/03 9:19 PM Page 73
Cable and Table Conduit of Contents Entry Ribbon Cable Entry Strain Relief Kit for Hoods Cat. No.
RHK 601 RHK 602 RHK 603
Description
Entry
One cable entry Two cable entry Three cable entry
40 x 5mm 40 x 10mm 40 x 15mm
Ribbon Cable Entry Strain Relief Kit for Bases Cat. No.
Hub Size
PG 16 PG 21 PG 29 PG 36 PG 42
RBK 708 RBK 709 RBK 710 RBK 711 RBK 712
Other sizes available as specials.
I Pos-E-Kon ™
Non-Metallic Cord Grip Fittings NPT Threads Cat. No.
CC-NPT38-G CC-NPT12-G CC-NPT34-G CC-NPT1-G
Cord Range ln.
mm
Thread Size
.197"-.394" .394"-.551" .512"-.709" .709"-.984"
5-10mm 10-14mm 13-18mm 18-25mm
c" d" f" 1"
ln.
mm
Thread Size
.197"-.394" .336"-.473" 394"-.551" .512"-.709" .709"-.984" .867"-.1.26"
5-10mm 6-12mm 10-14mm 13-18mm 18-25mm 22-32mm
11 13.5 16 21 29 36
PG Threads Cat. No.
CC-PG11-G CC-PG135-G CC-PG16-G CC-PG21-G CC-PG29-G CC-PG36-G
Cord Range
EM – Shielding Fitting (For externally shielded cable) Cat. No.
Hub Size
GEM672 GEM673 GEM674 GEM675
PG 13.5 PG 16 PG 21 PG 29
© 2002 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
I 73
412031.I02 PK 3/5 3/13/03 9:19 PM Page 74
Table of Contents Connection with Fiber Optic (POF) Cable Instructions 1. Before crimping the POF* cable, 1,0 mm to the glass fiber cable contact, the end of the fiber has to be polished. Stick end of POF* cable into polishing tool and grind on a plane surface (e.g. glass plate). Wipe off any residues after polishing. The best optical damping values are achieved with wet-polishing-procedure. 2. Strip 1,0 mm POF* cable on min. 14 mm for D sleeve contacts and min. 19 mm for D pin contacts.
Pos-E-Kon ™
I
polishing tool
for sleeve contacts min. 14 mm for pin contacts min. 19 mm
3. Insert stripped POF* cable in sleeve or pin contact until stop. The optical fiber should then stick about 1 mm out of the contact.
sleeve contact about 1,0 mm
pin contact about 1,0 mm
4. Optical Fiber crimping: Adjust the positioning sleeve into the corresponding inlet of the crimping tool with the stop screw at 1,45 mm (if necessary check with gauge pin, diameter 1,45 mm, with closed crimping tool). Insert the glass fiber cable contact together with the POF* cable through the crimp opening of the crimping tool into the positioning sleeve. By pressure on the contact the fiber inside the contact will be locked into the right position for the fiber crimping. Continue pressure until the release mechanism is heard.
positioning sleeve glass fibre contact
crimping area sleeve contact
crimping area pin contact
*POF = Polymer Optical Fiber
I 74
© 2002 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412031.I02 PK 3/5 3/13/03 9:19 PM Page 75
Fiber Optic Connection TableComponents of Contents For use in M10 Series Inserts Crimp Tool
CT610F
Polishing Tool
FPT702
FPS701
Polishing Sheet 1000 Grain
FSS703
4 Indent
Glass Fiber Cable Positioning sleeve
I
FST700
Male Pin
Pos-E-Kon ™
Stripper 1,0 mm
Female Sleeve
Look for more leading edge connections in the future from Pos-E-Kon.
© 2002 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
I 75