Breville BKC600XL Spring Replacement - The-Eye.eu!

Breville BKC600XL Spring Replacement

Breville BKC600XL Spring Replacement Replacing the spring should it fail to work.

Written By: Antonio

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 1 of 4

Breville BKC600XL Spring Replacement

INTRODUCTION Replacing the spring should it fail to work.

TOOLS:

PARTS:

Phillips #0 Screwdriver (1)

Spring (1)

Macbook Pro and Air 5-Point Pentalobe Screwdriver (1)

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 2 of 4

Breville BKC600XL Spring Replacement

Step 1 — "Bottom" Black Shell Piece



Remove the following 2 screws: 

Two 12mm black Truss Phillips screws.

 Reminder for reassembly; This bottom piece is first to be screwed back on. Step 2 — "Top" Black Shell Piece 

© iFixit — CC BY-NC-SA

www.iFixit.com

Remove the two 12mm Phillips screws.

Page 3 of 4

Breville BKC600XL Spring Replacement

Step 3 — Silver Casing



Remove the grey plastic casing.



Remove the two 12mm hexagonal screws.

Step 4 — Spring 

Identify the spring and the hook its attached to.



Carefully remove the spring.

To reassemble your device, follow these instructions in reverse order. This document was last generated on 2018-02-08 10:50:14 PM.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 4 of 4