Brochure Speedster - Coltene
Diamond-Shaped One-Piece Carbides for Rapid Crown & Bridge Preparation Compared to Diamonds…
Cuts 45% faster than diamonds, without clogging
• A faster, more efficient cut generates less heat reducing the likelihood of iatrogenic pulpitis
Use the same bur for amalgam or crown removal and gross reduction
Compared to Two-Piece Carbides…
Highly concentric, one-piece construction ensures consistent blade contact with the tooth surface
• Dramatically reduces the risk of surface micro-fractures • Eliminates brazed joint breakage and rusting Cover Photo courtesy of Dr. James Braun, DDS, MS
Accelerate Your Performance! No brazed joint – eliminates brazed joint breakage and rusting Concentric bur – cuts faster, smoother and more precise 8 mm head cuts instead of grinds, generating less heat at the surface
Speedster C&B Prep Carbide burs are technologically designed to provide a superior alternative to diamonds in crown and bridge preparation procedures.
• Total gross reduction, from crown or amalgam removal to finish, with fewer burs
• One-Piece solid carbide construction results in a longer lasting, smoother cutting instrument
• Additional thinner diameters allow for expanded indications
Clinical Case Photos courtesy of Dr. Allen Schneider, DDS, FAGD
Fig. 1 - Removal of PFM, #19, 1st molar.
Fig. 2 - Finish prep of #19, 1st molar.
Order Information
Speedster C&B Prep - Football RCB379-023 ISO No. 379
Dia. 023 (1/10 mm)
5 pcs
Speedster C&B Prep - Flat End Taper RCB847-018-8 ISO No. 847
Dia. 018 (1/10 mm)
5 pcs
Speedster C&B Prep - Flat End Taper RCB847-016-8 ISO No. 847
Dia. 016 (1/10 mm)
5 pcs
Speedster C&B Prep - Flat End Taper RCB847-014-8 ISO No. 847
Dia. 014 (1/10 mm)
5 pcs
Speedster C&B Prep - Flat End Taper RCB847-012-8 ISO No. 847
Dia. 012 (1/10 mm)
5 pcs
Speedster C&B Prep - Round End Taper RCB856-018-8 ISO No. 856 Dia. 018 (1/10 mm)
5 pcs
Speedster C&B Prep - Round End Taper RCB856-016-8 ISO No. 856 Dia. 016 (1/10 mm)
5 pcs
Speedster C&B Prep - Round End Taper RCB856-014-8 ISO No. 856 Dia. 014 (1/10 mm)
5 pcs
Speedster C&B Prep - Round End Taper RCB856-012-8 ISO No. 856 Dia. 012 (1/10 mm)
5 pcs
Coltène/Whaledent Inc. 235 Ascot Parkway Cuyahoga Falls, OH 44223 / USA Tel. USA & Canada + 1 800 221 3046 + 1 330 916 8800 Fax +1 330 916 7077 [email protected]
Coltène/Whaledent AG Feldwiesenstrasse 20 9450 Altstätten / Switzerland Tel. +41 (0)71 757 53 00 Fax +41 (0)71 757 53 01 [email protected]
Coltène/Whaledent GmbH + Co. KG Raiffeissenstrasse 30 89129 Langenau / Germany Tel. +49 (0)7345 805 0 Fax +49 (0)7345 805 201 [email protected]
www.coltene.com
P/N 300901C
Alpen Speedster C&B Prep (Friction Grip)
Cuts 45% faster than diamonds, without clogging
• A faster, more efficient cut generates less heat reducing the likelihood of iatrogenic pulpitis
Use the same bur for amalgam or crown removal and gross reduction
Compared to Two-Piece Carbides…
Highly concentric, one-piece construction ensures consistent blade contact with the tooth surface
• Dramatically reduces the risk of surface micro-fractures • Eliminates brazed joint breakage and rusting Cover Photo courtesy of Dr. James Braun, DDS, MS
Accelerate Your Performance! No brazed joint – eliminates brazed joint breakage and rusting Concentric bur – cuts faster, smoother and more precise 8 mm head cuts instead of grinds, generating less heat at the surface
Speedster C&B Prep Carbide burs are technologically designed to provide a superior alternative to diamonds in crown and bridge preparation procedures.
• Total gross reduction, from crown or amalgam removal to finish, with fewer burs
• One-Piece solid carbide construction results in a longer lasting, smoother cutting instrument
• Additional thinner diameters allow for expanded indications
Clinical Case Photos courtesy of Dr. Allen Schneider, DDS, FAGD
Fig. 1 - Removal of PFM, #19, 1st molar.
Fig. 2 - Finish prep of #19, 1st molar.
Order Information
Speedster C&B Prep - Football RCB379-023 ISO No. 379
Dia. 023 (1/10 mm)
5 pcs
Speedster C&B Prep - Flat End Taper RCB847-018-8 ISO No. 847
Dia. 018 (1/10 mm)
5 pcs
Speedster C&B Prep - Flat End Taper RCB847-016-8 ISO No. 847
Dia. 016 (1/10 mm)
5 pcs
Speedster C&B Prep - Flat End Taper RCB847-014-8 ISO No. 847
Dia. 014 (1/10 mm)
5 pcs
Speedster C&B Prep - Flat End Taper RCB847-012-8 ISO No. 847
Dia. 012 (1/10 mm)
5 pcs
Speedster C&B Prep - Round End Taper RCB856-018-8 ISO No. 856 Dia. 018 (1/10 mm)
5 pcs
Speedster C&B Prep - Round End Taper RCB856-016-8 ISO No. 856 Dia. 016 (1/10 mm)
5 pcs
Speedster C&B Prep - Round End Taper RCB856-014-8 ISO No. 856 Dia. 014 (1/10 mm)
5 pcs
Speedster C&B Prep - Round End Taper RCB856-012-8 ISO No. 856 Dia. 012 (1/10 mm)
5 pcs
Coltène/Whaledent Inc. 235 Ascot Parkway Cuyahoga Falls, OH 44223 / USA Tel. USA & Canada + 1 800 221 3046 + 1 330 916 8800 Fax +1 330 916 7077 [email protected]
Coltène/Whaledent AG Feldwiesenstrasse 20 9450 Altstätten / Switzerland Tel. +41 (0)71 757 53 00 Fax +41 (0)71 757 53 01 [email protected]
Coltène/Whaledent GmbH + Co. KG Raiffeissenstrasse 30 89129 Langenau / Germany Tel. +49 (0)7345 805 0 Fax +49 (0)7345 805 201 [email protected]
www.coltene.com
P/N 300901C
Alpen Speedster C&B Prep (Friction Grip)
