Cambridge SoundWorks OontZ Angle Plus Rubber ... - The-Eye.eu!

Cambridge SoundWorks OontZ Angle Plus Rubber Casing Replacement

Cambridge SoundWorks OontZ Angle Plus Rubber Casing Replacement Replacing the soft casing covering the edges of the Cambridge SoundWorks OontZ Angle Plus.

Written By: Farshad Mohebban

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 1 of 3

Cambridge SoundWorks OontZ Angle Plus Rubber Casing Replacement

Step 1 — Rubber Casing 

Remove the six screw covers from the bottom of the device.



Starting from the screw covers, remove the front and back casing of the device.

Step 2

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 2 of 3

Cambridge SoundWorks OontZ Angle Plus Rubber Casing Replacement

Step 3 

Carefully pull off the casing covering the ends.



Slowly remove the casing from the top of the device.

Step 4

To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-10-11 04:48:39 PM.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 3 of 3