Chumby One Rear Cover Replacement

Chumby One Rear Cover Replacement

Chumby One Rear Cover Replacement Chumby One Rear Cover Replacement

Written By: Student Jones

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 1 of 4

Chumby One Rear Cover Replacement

INTRODUCTION Use this guide to remove the Chumby One's rear cover.

TOOLS: Phillips #00 Screwdriver (1) Heavy-Duty Spudger (1)

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 2 of 4

Chumby One Rear Cover Replacement

Step 1 — Rear Cover

 Be careful when taking apart this device. 

Use a spudger to remove the plastic feet.



Unscrew the four Phillips screws using a #00 Phillips screwdriver.

Step 2



Remove the rear cover from the device.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 3 of 4

Chumby One Rear Cover Replacement

To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-20 12:15:39 PM.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 4 of 4