CM Storm QuickFire Rapid O-Ring: Small Keycap Installation

CM Storm QuickFire Rapid O-Ring: Small Keycap Installation

CM Storm QuickFire Rapid O-Ring: Small Keycap Installation O-rings make mechanical keyboards quieter while, in some cases, improving performance. Learn how to install them on your keyboard.

Written By: Shiva Empranthiri

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 1 of 4

CM Storm QuickFire Rapid O-Ring: Small Keycap Installation

INTRODUCTION This guide will go over how to install O-rings on smaller keys on your keyboard.

TOOLS:

PARTS:

Keycap Removal Tool (1)

Cherry MX Rubber O-Ring (1)

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 2 of 4

CM Storm QuickFire Rapid O-Ring: Small Keycap Installation

Step 1 — O-Ring: Small Keycap 

Insert the keycap puller around the key you'd like to install an O-ring under.



Pull cap directly upward.

Step 2

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 3 of 4

CM Storm QuickFire Rapid O-Ring: Small Keycap Installation

Step 3 

Place an O-ring around the plastic shaft located on the underside of the keycap.

To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-19 06:06:09 AM.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 4 of 4