Colour has never been so hot.
PYROCLASSIC IV TECHNICAL SPECIFICATIONS 900mm
900mm
B
C
H
900mm
I G
PARALLEL INSTALLATION WITH PROTECTED WALLS
Optional Pyro Combo Raised Hearth & Woodbin (H 250mm)
A
E
K E
J
CORNER INSTALLATION WITH PROTECTED WALLS
F
PYROCLASSIC IV WITH WALL SCREENS OR WITH NON COMBUSTIBLE WALLS
D
J
900mm
Optional Pyro Combo Raised Hearth & Woodbin (H 250mm)
F C
A
B
C
D
E
F
G
H
I
J
K
145mm
105mm
115mm
390mm
300mm
680mm
650mm
245mm
373mm
370mm
530mm
Colour has never been so hot.
Pyroclassic IV with combustible walls or unprotected walls
480mm
350mm
370mm
550mm
740mm
PYROCLASSIC INSULATING HEARTH
B
Unprotected Wall
480+mm
800mm
The Pyroclassic IV must sit on some form of insulating hearth. If the hearth is installed flush with a surrounding floor then it must have a minimum distance of 369mm from the front of the fire to the front edge of the hearth. The minimum width of the insulating hearth must be not less than 680mm with the Pyroclassic IV centred from each side of the hearth. If the hearth is raised, the floor protector area at the front can be reduced. For example, the Pyroclassic Raised Hearth & Woodbin is 250mm in height, which means the floor protector area at the front of the fire can be reduced. The Pyroclassic raised hearth is a powder coated steel construction and can be installed directly on to any combustible floor material.
With Pyroclassic standard wall screen 550mm wide
50mm
ALTERNATIVE INSULATING HEARTH 20+mm suitable insulated board with non combustible top, or masonry slab with a minimum thickness of 50mm. INSULATING HEARTH SURFACE HEIGHT FROM COMBUSTIBLE FLOOR
0mm
Height
15mm
25mm
40mm
MINIMUM DISTANCE IN FRONT OF PYROCLASSIC TO HEARTH FRONT EDGE E
Depth
370mm
345mm
320mm
300mm
WALL SCREENS Our wall screens will significantly reduce the minimum required safety distances. The side edges of the sheet metal are folded in (forming a right angle), creating a 25mm air gap. Combustible walls are protected from the hottest parts of the fire, which are the top plate and first sections of the flue. The open bottom edge of the screen sits 50mm below the top of the Pyroclassic IV and extends upwards. Cool air enters from below, runs up between the screen and the wall and exits out the top. FIRE DIMENSIONS SHOWING WETBACK FIXING LOCATIONS
370mm if flush with floor 105mm Wall to back of Pyroclassic IV
BACK TO WALL & NO SIDE WALLS
SPECIFICATIONS Dimensions: Weight: Fire chamber volume: Temperature: Maximum heat output: Useful heat output: Fuel consumption: Emission rate: Efficiency rate: Air control: Start up control: Cooktop area: Flue diameter:
L 650mm x W 455mm x H 625mm Approximately 140kg 20.8 litres 800˚C - 1100˚C (1500˚F - 2000˚F) >15kW 2kW - 8kW 1.1kg/hr 0.3g/kg (Dry and Wet) 74% space heating (Dry) 65.3% space heating with 18% water heating (Wet) Primary & secondary, fully automatic Manually adjustable Turboslide 0.26m² - 10mm thick plate 100mm standard (4”)
Pyroclassic IV side profile with wetback fixing heights
510 570
Freestanding model only. No insert available. WARRANTY: The ceramic firebox in the Pyroclassic IV is warranted for 15 years against defective material or workmanship, provided the fire is used and installed according to the manufacturer’s operating and installation instructions. All other items are warranted for 12 months. This warranty does not cover damage or failure caused by tampering, carelessness, abuse or misuse. NOTE: The warranty only applies to the original owner and cannot be transferred.
Disclaimer: +/- 2mm measurement variation.
THE PYROCLASSIC IV HAS BEEN TESTED TO THE FOLLOWING STANDARDS AS/NZS4012:1999 • AS/NZS4013:1999 • AS/NZS4012:2014 • AS/NZS4013:2014 AS/NZS2918:2001 • EN13240:2001 • A2:2004 • ECan authorisation: 121121 (Dry), 121122 (Wet)
PYROCLASSIC FIRES ARE A MEMBER OF THE NZHHA & AHHA
More than 30 years as the cleanest, most efficient wood fire in New Zealand.
www.pyroclassic.co.nz
PYROCLASSIC IV ACCESSORIES
Full Stainless Steel (standard)
Painted outlet cone with stainless steel flue
RECOMMENDED FLUE SYSTEMS To get the best performance from your Pyroclassic IV, we recommend that a tested and approved 100mm Eco Flue Kit with full flow vertical discharge cowl is used.
Painted outlet cone with painted flue lengths
What makes a Pyroclassic Fire so unique?
WOODBINS Lift your Pyroclassic IV to the perfect height for loading wood with one of our woodbins. Both options are reversible, one side for stacking wood and one as a storage draw for your tools and kindling, giving you ultimate flexibility. These are finished in a durable ripple black powder coat. Large Raised Hearth & Reversible Woodbin: A direct replacement for a traditional insulated tiled hearth, this woodbin meets all clearances required for a Pyroclassic IV. Dimensions: W 680mm x D 950mm x H 250mm
More than 30 years as the cleanest, most efficient wood fire in New Zealand.
Opt for our 3.7kW high output wetback for all your domestic hot water needs.
The only clean air approved wood fire to provide a genuine 12hr+ overnight burn, even with a wetback.
The 10mm steel top plate is perfect for cooking.
Forget fire bricks, the unique cylindrical ceramic fire chamber of the Pyroclassic IV retains heat like a kiln.
Radiant and convection heating.
All Pyroclassic Fires carry our 15 year ceramic firebox warranty.
Suitable for homes 100 - 200+m² depending on house type.
Mini Raised Table & Reversible Woodbin: Ideal for installations when a hearth is not required because the floor itself meets the standards for a non combustible floor. Dimensions: W 480mm x D 680mm x H 250mm
Our 3.7kW high output wetback uses an open grid format which increases the surface area of the wetback ensuring consistent hot water.
LOG RACK Enjoy the convenience of this stylish log rack. Finished in a durable ripple black powder coat.
High velocity heated room air
3.7kW optional wetback
Dimensions: W 800mm x H 1000mm x D 300mm
WALL SCREENS All wall screens are powder coated in our full colour range. Their use significantly reduces the minimum required safety distances. See the back of this brochure for more info.
Ash
Standard: W 550mm x H 800mm x D 25mm
Ceramic lining to maintain high combustion temperatures and heat storage
Cool room air drawn in
Make the most of your Pyroclassic cooktop with this handy oven, mitt and trivet set.
Sizes:
Gas and tar droplets
Firewood Turboslide start-up air supply
COOKTOP OVEN
Secondary air inlets and load limiter
Mixed hot air and gases
GET COLOURFUL
Visit our website to download the latest colour charts.
Cooking surface
Secondary air preheat to over 600ºC
Mamba Green
WETBACK
Hot flue gases: mainly carbon dioxide, water vapour and nitrogen
Primary air inlets
Sky Blue
The Pyroclassic IV is for lovers of colour! Choose from more than 100 colours, from bold and bright to classic neutrals. All panels are easily interchangeable so you can update your fire to match your home whenever you like.
HOW A PYROCLASSIC IV WORKS
Secondary combustion
Orange x15
Corner:
W 900mm x H 800mm x D 25mm (pair)
Custom: We can accommodate most sizes. Screens larger than 1m2 will incur additional charges from the standard custom price.
Min. cylinder wall temperature 600ºc required
BONUS ESSENTIALS KIT To say thank you for choosing Pyroclassic Fires, we include a FREE Pyroclassic Essentials Kit, valued at $115, with every fire! This set contains a rake and shovel, re-usable fire starters and moisture meter.
Please visit our website for more information www.pyroclassic.co.nz
900mm
B
C
H
900mm
I G
PARALLEL INSTALLATION WITH PROTECTED WALLS
Optional Pyro Combo Raised Hearth & Woodbin (H 250mm)
A
E
K E
J
CORNER INSTALLATION WITH PROTECTED WALLS
F
PYROCLASSIC IV WITH WALL SCREENS OR WITH NON COMBUSTIBLE WALLS
D
J
900mm
Optional Pyro Combo Raised Hearth & Woodbin (H 250mm)
F C
A
B
C
D
E
F
G
H
I
J
K
145mm
105mm
115mm
390mm
300mm
680mm
650mm
245mm
373mm
370mm
530mm
Colour has never been so hot.
Pyroclassic IV with combustible walls or unprotected walls
480mm
350mm
370mm
550mm
740mm
PYROCLASSIC INSULATING HEARTH
B
Unprotected Wall
480+mm
800mm
The Pyroclassic IV must sit on some form of insulating hearth. If the hearth is installed flush with a surrounding floor then it must have a minimum distance of 369mm from the front of the fire to the front edge of the hearth. The minimum width of the insulating hearth must be not less than 680mm with the Pyroclassic IV centred from each side of the hearth. If the hearth is raised, the floor protector area at the front can be reduced. For example, the Pyroclassic Raised Hearth & Woodbin is 250mm in height, which means the floor protector area at the front of the fire can be reduced. The Pyroclassic raised hearth is a powder coated steel construction and can be installed directly on to any combustible floor material.
With Pyroclassic standard wall screen 550mm wide
50mm
ALTERNATIVE INSULATING HEARTH 20+mm suitable insulated board with non combustible top, or masonry slab with a minimum thickness of 50mm. INSULATING HEARTH SURFACE HEIGHT FROM COMBUSTIBLE FLOOR
0mm
Height
15mm
25mm
40mm
MINIMUM DISTANCE IN FRONT OF PYROCLASSIC TO HEARTH FRONT EDGE E
Depth
370mm
345mm
320mm
300mm
WALL SCREENS Our wall screens will significantly reduce the minimum required safety distances. The side edges of the sheet metal are folded in (forming a right angle), creating a 25mm air gap. Combustible walls are protected from the hottest parts of the fire, which are the top plate and first sections of the flue. The open bottom edge of the screen sits 50mm below the top of the Pyroclassic IV and extends upwards. Cool air enters from below, runs up between the screen and the wall and exits out the top. FIRE DIMENSIONS SHOWING WETBACK FIXING LOCATIONS
370mm if flush with floor 105mm Wall to back of Pyroclassic IV
BACK TO WALL & NO SIDE WALLS
SPECIFICATIONS Dimensions: Weight: Fire chamber volume: Temperature: Maximum heat output: Useful heat output: Fuel consumption: Emission rate: Efficiency rate: Air control: Start up control: Cooktop area: Flue diameter:
L 650mm x W 455mm x H 625mm Approximately 140kg 20.8 litres 800˚C - 1100˚C (1500˚F - 2000˚F) >15kW 2kW - 8kW 1.1kg/hr 0.3g/kg (Dry and Wet) 74% space heating (Dry) 65.3% space heating with 18% water heating (Wet) Primary & secondary, fully automatic Manually adjustable Turboslide 0.26m² - 10mm thick plate 100mm standard (4”)
Pyroclassic IV side profile with wetback fixing heights
510 570
Freestanding model only. No insert available. WARRANTY: The ceramic firebox in the Pyroclassic IV is warranted for 15 years against defective material or workmanship, provided the fire is used and installed according to the manufacturer’s operating and installation instructions. All other items are warranted for 12 months. This warranty does not cover damage or failure caused by tampering, carelessness, abuse or misuse. NOTE: The warranty only applies to the original owner and cannot be transferred.
Disclaimer: +/- 2mm measurement variation.
THE PYROCLASSIC IV HAS BEEN TESTED TO THE FOLLOWING STANDARDS AS/NZS4012:1999 • AS/NZS4013:1999 • AS/NZS4012:2014 • AS/NZS4013:2014 AS/NZS2918:2001 • EN13240:2001 • A2:2004 • ECan authorisation: 121121 (Dry), 121122 (Wet)
PYROCLASSIC FIRES ARE A MEMBER OF THE NZHHA & AHHA
More than 30 years as the cleanest, most efficient wood fire in New Zealand.
www.pyroclassic.co.nz
PYROCLASSIC IV ACCESSORIES
Full Stainless Steel (standard)
Painted outlet cone with stainless steel flue
RECOMMENDED FLUE SYSTEMS To get the best performance from your Pyroclassic IV, we recommend that a tested and approved 100mm Eco Flue Kit with full flow vertical discharge cowl is used.
Painted outlet cone with painted flue lengths
What makes a Pyroclassic Fire so unique?
WOODBINS Lift your Pyroclassic IV to the perfect height for loading wood with one of our woodbins. Both options are reversible, one side for stacking wood and one as a storage draw for your tools and kindling, giving you ultimate flexibility. These are finished in a durable ripple black powder coat. Large Raised Hearth & Reversible Woodbin: A direct replacement for a traditional insulated tiled hearth, this woodbin meets all clearances required for a Pyroclassic IV. Dimensions: W 680mm x D 950mm x H 250mm
More than 30 years as the cleanest, most efficient wood fire in New Zealand.
Opt for our 3.7kW high output wetback for all your domestic hot water needs.
The only clean air approved wood fire to provide a genuine 12hr+ overnight burn, even with a wetback.
The 10mm steel top plate is perfect for cooking.
Forget fire bricks, the unique cylindrical ceramic fire chamber of the Pyroclassic IV retains heat like a kiln.
Radiant and convection heating.
All Pyroclassic Fires carry our 15 year ceramic firebox warranty.
Suitable for homes 100 - 200+m² depending on house type.
Mini Raised Table & Reversible Woodbin: Ideal for installations when a hearth is not required because the floor itself meets the standards for a non combustible floor. Dimensions: W 480mm x D 680mm x H 250mm
Our 3.7kW high output wetback uses an open grid format which increases the surface area of the wetback ensuring consistent hot water.
LOG RACK Enjoy the convenience of this stylish log rack. Finished in a durable ripple black powder coat.
High velocity heated room air
3.7kW optional wetback
Dimensions: W 800mm x H 1000mm x D 300mm
WALL SCREENS All wall screens are powder coated in our full colour range. Their use significantly reduces the minimum required safety distances. See the back of this brochure for more info.
Ash
Standard: W 550mm x H 800mm x D 25mm
Ceramic lining to maintain high combustion temperatures and heat storage
Cool room air drawn in
Make the most of your Pyroclassic cooktop with this handy oven, mitt and trivet set.
Sizes:
Gas and tar droplets
Firewood Turboslide start-up air supply
COOKTOP OVEN
Secondary air inlets and load limiter
Mixed hot air and gases
GET COLOURFUL
Visit our website to download the latest colour charts.
Cooking surface
Secondary air preheat to over 600ºC
Mamba Green
WETBACK
Hot flue gases: mainly carbon dioxide, water vapour and nitrogen
Primary air inlets
Sky Blue
The Pyroclassic IV is for lovers of colour! Choose from more than 100 colours, from bold and bright to classic neutrals. All panels are easily interchangeable so you can update your fire to match your home whenever you like.
HOW A PYROCLASSIC IV WORKS
Secondary combustion
Orange x15
Corner:
W 900mm x H 800mm x D 25mm (pair)
Custom: We can accommodate most sizes. Screens larger than 1m2 will incur additional charges from the standard custom price.
Min. cylinder wall temperature 600ºc required
BONUS ESSENTIALS KIT To say thank you for choosing Pyroclassic Fires, we include a FREE Pyroclassic Essentials Kit, valued at $115, with every fire! This set contains a rake and shovel, re-usable fire starters and moisture meter.
Please visit our website for more information www.pyroclassic.co.nz
