Compact Excavators - Bobcat.eu
430 435
Compact Excavators
| 1
Improve your swing... and your drive Contractors... Landscapers... Utilities... Rental Operators... The Bobcat 430 and 435 are the world’s first compact excavators with Zero Tail Swing (ZTS) and the FastTrack™ drive system — and they’re ready to take on the biggest challenges you can throw at them!
Load-sensing An axial piston pump with load-sensing in combination with a load-independent flow division system enables simultaneous, independent control of all movements.
2 |
Optional long dipperstick The longer dipperstick reaches farther from one spot to do more work without repositioning the machine. The extra reach, combined with a higher dump height, also makes loading trucks faster and easier.
430 Long Dipperstick Option
435 Long Dipperstick Option
The long dipperstick version of the 430 gives you an additional 305
The long dipperstick on the 435 extends
mm of reach and 178 mm of dump height, resulting in a maximum
reach by 317 mm and dump height by 242
reach of 5395 mm, and a maximum dump height of 3305 mm.
mm, providing a maximum reach of 5961 mm, and a maximum dump height of 3889 mm.
| 3
Compact and Versatile Zero Tail Swing Many competing excavators offer Zero Tail Swing, but the 430 and 435 take the concept to the next level. Not only does the rear of the machine stay within the excavator’s width, so does the front end — the machine’s left and right front corners! This design decreases the chances of accidentally striking buildings or trees during operation, And no damage to the machine or surrounding objects means lower operating costs!
Zero Tail Swing gives you 320 degrees of unrestricted Rotation
Tight Spaces — No Problem Bobcat Zero Tail Swing also permits easier spoil placement in tight quarters. If necessary, the operator can slew completely around and dump spoil behind the machine. The Bobcat ZTS design allows a zero radius swing range of 320 degrees. This makes the 430/435 ideal for jobsites where manoeuvrability in small spaces is a must.
FastTrack™ Drive System With the innovative FastTrack system, dedicated axial piston pumps power the travel motors to give you jobsite advantages that competing machines can’t even come close to. Smooth, precise turns, maximum torque control, unmatched travel speed. In fact, the travel speed of the 430/435 FastTrack is nearly twice the speed of the nearest competitor. You can move the 430 and 435 FastTrack much faster within and between jobsites. Low-range speeds eliminate the need to shift between speed ranges on most backfilling projects. The 430/435 FastTrack grade, doze and backfill faster than other machines. And because you have more predictable control of the drive system, loading and unloading trailers is also much easier.
4 |
Features that make the difference Dual-Cylinder Dozer Blade with Float
Operator Comfort
How’s this for standard equipment? The versatile dozer blade is not
The spacious cab provides plenty of head
only invaluable for backfilling, dozing and leveling, it also serves as a
room, leg room and elbow room for even
stabilizer and improves lift capacity when lifting loads over the front
the biggest operators. A wide door opening
of the excavator.
allows easy entry and exit.
Impressive Digging Force
Serviceability
The 430 and 435 deliver plenty of power for bigger jobs — excavation,
Access to machine components for routine
trenching, demolition, material handling — and an exceptional
maintenance and service is exceptional
digging force!
because of the swing-open rear tailgate and flip-up side access hood.
Thumb-Control Auxiliary Hydraulic System
Advanced steering system
A Bobcat exclusive. Variable flow, continuous flow, direction of flow:
Tracks distribute the machine’s weight over
all auxiliary hydraulic functions are controlled by two convenient
a large area, reducing ground pressure and
switches on the right joystick.
minimizing damage to lawns and other
• Flow rate adjusts from zero to full flow.
surfaces. Tracks also allow the excavator to
• Variable flow for precision control of attachments.
perform where rubber-tired machines bog
• For continuous flow, the operator does not have to constantly press
down. The result — more working days per
or hold a control mechanism.
year. Cab Height The 430 is less than 2450 mm high, a critical limit for transportation.
| 5
Dimensions & Working range 430
Working range 430 5229 5097
4925 3754
2365 186° 121°
3522
1522
1200
27°
1801
392
1669
3066
4571
3125
546
2175
2258
Working range 430 long arm 2393
5507 5395
2426 186° 4755
121° 3520
3305 1500
27°
320 1780 3366
534
2604
Working range 435
435
5757 5611
5258 2428
4023
183° 123°
3970 1644
5346 3649
128° 26°
1932
442
1843
534 2568
3420
2496
Working range 435 long arm 2541
2553
6096 5961
183° 123° 400
3970
128°
5588 3889
²
26°
1930
534 3772
All dimensions in mm.
6 |
2883
Specifications 430
430 FastTrack™
435
3640 kg
4788 kg
435 FastTrack™
Weights Operating weight with ROPS canopy Additional weight for cab with heater Additional weight for cab with HVAC Additional weight for steel tracks Additional weight for long dipperstick
3584 kg
4788 kg
138 kg 161 kg 45 kg 106 kg
138 kg 161 kg 33 kg 112 kg
Kubota / V2203-M-DI-E2B-BC-1 Diesel / Liquid 31.9 kW 144.2 Nm 4 2.2 l 87.0 mm / 92.4 mm 12 V — 90 A — open frame with internal regulator 12 V — gear reduction type — 2.0 kW
Kubota / V2003-M-DI-TE2B-BC-1 Diesel / Liquid 36.5 kW 169.6 Nm 4 2.0 l 83.0 mm / 92.4 mm 12 V — 90 A — open frame with internal regulator 12 V — gear reduction type — 2.0 kW
Engine Make / model Fuel / Cooling Maximum power at 2400 RPM (DIN 70020) Maximum torque (SAE J1349 Gross) Number of cylinder Displacement Bore / Stroke Alternator Starter
Controls Steering
Direction and speed controlled by two pilot-operated hand levers or foot pedals
Hydraulic System Pump type Piston pump capacity Gear pump capacity Auxiliary flow Control valve
Dual-outlet variable displacement piston with gear pumps 76.4 l/min 2 x 38.2 l/min 28.8 l/min 29.0 l/min 62.1 l/min 62.1 l/min Eight-spool, individually compensated type, closed centre
Piston pump with pressure compensating, load sensing and torque limiter controls, external gear pump 112.5 l/min 112.5 l/min 35.2 l/min 35.2 l/min 75.0 l/min 75,0 l/min Nine-spool, individually compensated type, closed centre
17099 N 14719 N 30541 N 37800 N
23406 N 20128 N 35105 N 46657 N
Digging force, standard dipperstick Digging force, long dipperstick Digging force, bucket Drawbar pull Ground pressure with standard dipperstick and rubber tracks Ground pressure with standard dipperstick and steel tracks Ground pressure with long dipperstick and rubber tracks Ground pressure with long dipperstick and steel tracks Travel speed, low range Travel speed, high range Maximum digging depth, standard dipperstick Maximum digging depth, long dipperstick
28.5 kPa
29.0 kPa
-
-
29.5 kPa
29.4 kPa
-
-
29.6 kPa
29.9 kPa
-
-
30.0 kPa
30.2 kPa
-
-
2.4 km/h 4.7 km/h
4.2 km/h 8.0 km/h
2.9 km/h 4.8 km/h
4.5 km/h 8.7 km/h
3066 mm 3366 mm
3420 mm 3772 mm
90° 50° Single row shear-type ball bearings with internal gear Orbit motor connected to a planetary drive 8.8 RPM
90° 50° Single row shear-type ball bearings with internal gear Radial piston motor with brake 9.3 RPM
320 mm 1 top, 5 bottom 30°
400 mm 1 top, 5 bottom 30°
Slew System Boom swing, left Boom swing, right Slew circle Slew drive Slew rate
Traction Track width Number of track rollers per side Gradeability
Brakes Travel brake Slew brake
Spring applied, hydraulically released, multi-disk brake Hydraulic lock on motor and pin lock
Fluid Capacities Cooling system Engine lubrication plus oil filter Fuel reservoir Hydraulic reservoir Hydraulic system with bucket and dipper cylinder retracted, bucket on the ground, and blade down
17.0 l 7.1 l 67.4 l 36.7 l
36.0 l 7.1 l 67.4 l 29.9 l
51.1 l
54.2 l
| 7
Specifications and design are subject to change without notice. Pictures of Bobcat units may show other than standard equipment.
Performance
Bobcat EMEA Drève Richelle 167 B-1410 Waterloo, Belgium
8 | www.bobcat.eu
©2008 Bobcat EMEA 4471390-EN (02-08)
PEFC/07-31-77
Compact Excavators
| 1
Improve your swing... and your drive Contractors... Landscapers... Utilities... Rental Operators... The Bobcat 430 and 435 are the world’s first compact excavators with Zero Tail Swing (ZTS) and the FastTrack™ drive system — and they’re ready to take on the biggest challenges you can throw at them!
Load-sensing An axial piston pump with load-sensing in combination with a load-independent flow division system enables simultaneous, independent control of all movements.
2 |
Optional long dipperstick The longer dipperstick reaches farther from one spot to do more work without repositioning the machine. The extra reach, combined with a higher dump height, also makes loading trucks faster and easier.
430 Long Dipperstick Option
435 Long Dipperstick Option
The long dipperstick version of the 430 gives you an additional 305
The long dipperstick on the 435 extends
mm of reach and 178 mm of dump height, resulting in a maximum
reach by 317 mm and dump height by 242
reach of 5395 mm, and a maximum dump height of 3305 mm.
mm, providing a maximum reach of 5961 mm, and a maximum dump height of 3889 mm.
| 3
Compact and Versatile Zero Tail Swing Many competing excavators offer Zero Tail Swing, but the 430 and 435 take the concept to the next level. Not only does the rear of the machine stay within the excavator’s width, so does the front end — the machine’s left and right front corners! This design decreases the chances of accidentally striking buildings or trees during operation, And no damage to the machine or surrounding objects means lower operating costs!
Zero Tail Swing gives you 320 degrees of unrestricted Rotation
Tight Spaces — No Problem Bobcat Zero Tail Swing also permits easier spoil placement in tight quarters. If necessary, the operator can slew completely around and dump spoil behind the machine. The Bobcat ZTS design allows a zero radius swing range of 320 degrees. This makes the 430/435 ideal for jobsites where manoeuvrability in small spaces is a must.
FastTrack™ Drive System With the innovative FastTrack system, dedicated axial piston pumps power the travel motors to give you jobsite advantages that competing machines can’t even come close to. Smooth, precise turns, maximum torque control, unmatched travel speed. In fact, the travel speed of the 430/435 FastTrack is nearly twice the speed of the nearest competitor. You can move the 430 and 435 FastTrack much faster within and between jobsites. Low-range speeds eliminate the need to shift between speed ranges on most backfilling projects. The 430/435 FastTrack grade, doze and backfill faster than other machines. And because you have more predictable control of the drive system, loading and unloading trailers is also much easier.
4 |
Features that make the difference Dual-Cylinder Dozer Blade with Float
Operator Comfort
How’s this for standard equipment? The versatile dozer blade is not
The spacious cab provides plenty of head
only invaluable for backfilling, dozing and leveling, it also serves as a
room, leg room and elbow room for even
stabilizer and improves lift capacity when lifting loads over the front
the biggest operators. A wide door opening
of the excavator.
allows easy entry and exit.
Impressive Digging Force
Serviceability
The 430 and 435 deliver plenty of power for bigger jobs — excavation,
Access to machine components for routine
trenching, demolition, material handling — and an exceptional
maintenance and service is exceptional
digging force!
because of the swing-open rear tailgate and flip-up side access hood.
Thumb-Control Auxiliary Hydraulic System
Advanced steering system
A Bobcat exclusive. Variable flow, continuous flow, direction of flow:
Tracks distribute the machine’s weight over
all auxiliary hydraulic functions are controlled by two convenient
a large area, reducing ground pressure and
switches on the right joystick.
minimizing damage to lawns and other
• Flow rate adjusts from zero to full flow.
surfaces. Tracks also allow the excavator to
• Variable flow for precision control of attachments.
perform where rubber-tired machines bog
• For continuous flow, the operator does not have to constantly press
down. The result — more working days per
or hold a control mechanism.
year. Cab Height The 430 is less than 2450 mm high, a critical limit for transportation.
| 5
Dimensions & Working range 430
Working range 430 5229 5097
4925 3754
2365 186° 121°
3522
1522
1200
27°
1801
392
1669
3066
4571
3125
546
2175
2258
Working range 430 long arm 2393
5507 5395
2426 186° 4755
121° 3520
3305 1500
27°
320 1780 3366
534
2604
Working range 435
435
5757 5611
5258 2428
4023
183° 123°
3970 1644
5346 3649
128° 26°
1932
442
1843
534 2568
3420
2496
Working range 435 long arm 2541
2553
6096 5961
183° 123° 400
3970
128°
5588 3889
²
26°
1930
534 3772
All dimensions in mm.
6 |
2883
Specifications 430
430 FastTrack™
435
3640 kg
4788 kg
435 FastTrack™
Weights Operating weight with ROPS canopy Additional weight for cab with heater Additional weight for cab with HVAC Additional weight for steel tracks Additional weight for long dipperstick
3584 kg
4788 kg
138 kg 161 kg 45 kg 106 kg
138 kg 161 kg 33 kg 112 kg
Kubota / V2203-M-DI-E2B-BC-1 Diesel / Liquid 31.9 kW 144.2 Nm 4 2.2 l 87.0 mm / 92.4 mm 12 V — 90 A — open frame with internal regulator 12 V — gear reduction type — 2.0 kW
Kubota / V2003-M-DI-TE2B-BC-1 Diesel / Liquid 36.5 kW 169.6 Nm 4 2.0 l 83.0 mm / 92.4 mm 12 V — 90 A — open frame with internal regulator 12 V — gear reduction type — 2.0 kW
Engine Make / model Fuel / Cooling Maximum power at 2400 RPM (DIN 70020) Maximum torque (SAE J1349 Gross) Number of cylinder Displacement Bore / Stroke Alternator Starter
Controls Steering
Direction and speed controlled by two pilot-operated hand levers or foot pedals
Hydraulic System Pump type Piston pump capacity Gear pump capacity Auxiliary flow Control valve
Dual-outlet variable displacement piston with gear pumps 76.4 l/min 2 x 38.2 l/min 28.8 l/min 29.0 l/min 62.1 l/min 62.1 l/min Eight-spool, individually compensated type, closed centre
Piston pump with pressure compensating, load sensing and torque limiter controls, external gear pump 112.5 l/min 112.5 l/min 35.2 l/min 35.2 l/min 75.0 l/min 75,0 l/min Nine-spool, individually compensated type, closed centre
17099 N 14719 N 30541 N 37800 N
23406 N 20128 N 35105 N 46657 N
Digging force, standard dipperstick Digging force, long dipperstick Digging force, bucket Drawbar pull Ground pressure with standard dipperstick and rubber tracks Ground pressure with standard dipperstick and steel tracks Ground pressure with long dipperstick and rubber tracks Ground pressure with long dipperstick and steel tracks Travel speed, low range Travel speed, high range Maximum digging depth, standard dipperstick Maximum digging depth, long dipperstick
28.5 kPa
29.0 kPa
-
-
29.5 kPa
29.4 kPa
-
-
29.6 kPa
29.9 kPa
-
-
30.0 kPa
30.2 kPa
-
-
2.4 km/h 4.7 km/h
4.2 km/h 8.0 km/h
2.9 km/h 4.8 km/h
4.5 km/h 8.7 km/h
3066 mm 3366 mm
3420 mm 3772 mm
90° 50° Single row shear-type ball bearings with internal gear Orbit motor connected to a planetary drive 8.8 RPM
90° 50° Single row shear-type ball bearings with internal gear Radial piston motor with brake 9.3 RPM
320 mm 1 top, 5 bottom 30°
400 mm 1 top, 5 bottom 30°
Slew System Boom swing, left Boom swing, right Slew circle Slew drive Slew rate
Traction Track width Number of track rollers per side Gradeability
Brakes Travel brake Slew brake
Spring applied, hydraulically released, multi-disk brake Hydraulic lock on motor and pin lock
Fluid Capacities Cooling system Engine lubrication plus oil filter Fuel reservoir Hydraulic reservoir Hydraulic system with bucket and dipper cylinder retracted, bucket on the ground, and blade down
17.0 l 7.1 l 67.4 l 36.7 l
36.0 l 7.1 l 67.4 l 29.9 l
51.1 l
54.2 l
| 7
Specifications and design are subject to change without notice. Pictures of Bobcat units may show other than standard equipment.
Performance
Bobcat EMEA Drève Richelle 167 B-1410 Waterloo, Belgium
8 | www.bobcat.eu
©2008 Bobcat EMEA 4471390-EN (02-08)
PEFC/07-31-77
