concerto⢠system - Architectural Components Group
CONCERTO SYSTEM ™
Series 100-500
The ACGI Concerto™ Wall System is comprised of a series of interchangeable aluminum extrusions with an assortment of reveal conditions. Custom extrusions are also available. The wall system makes it possible to combine most of ACGI’s perforated and solid panel series, such as Encore™ and Flat Panel. Curved panel applications are also available. Concerto™ Wall System is available in five interchangeable series: Series 100 includes various extrusions resulting in a recessed reveal and a variety of trim options. Series 200 extrusions extend to the face of the wall panel resulting in a framed panel system. Series 300 extrusions cover the edges of the panel but create a shallower reveal adding emphasis to the extrusion. Series 400 accentuates thinner architectural panels. The extrusions operate in conjunction with a Z-Clip mounting system to allow easy removal of panels for access. The resulting reveal is recessed to the depth of the panel thickness. Series 500 adds captured panel perimeter extensions.
SP-100 Spline
2
Concerto™ Wall System Series 100 shown with perforated panels and acoustical insulation.
4
3 WT-100 Extrusion
1 Furring Strip PT-100 Extrusion
Architectural Components Group, Inc.
(417) 869-6777
[email protected]
v2.0
v2.0
CONCERTO™ WALL SYSTEM The Concerto™ Wall System is comprised of a
The illustration below shows typical positions
combination of separate aluminum extrusions.
and applications of our extrusions, as well as,
These consist of wall trim and vertical splines,
optional designs. A variety of sizes, shapes,
inside and outside corner trim, and perimeter
and configurations can be easily incorporated
and base trim. A majority of our extrusions are
(including access columns). Please contact ACGI
interchangeable—enabling flexibility in the
or your ACGI Sales Representative for custom
design of any wall project.
applications or special project requirements.
Wall Trim & Spline (Reveal) Designs WT-100 1⁄8"–1⁄2"
1⁄8"–1⁄2"
WT-101 13⁄32"
1⁄2"–11⁄8"
PT-101 & MT-100
1⁄2"
WT-300
PT-202 & ST-688
WT-400 1⁄8"–1"
SP-100 1⁄8"–1"
Inside Corner Trim Designs PT-100 & PT-101
CT-302
WT-400
PT-200
PT-300
PT-400
Base Trim Designs PT-100
Architectural Components Group, Inc.
(417) 869-6777
PT-500
[email protected]
v2.0
Perimeter Trim Designs PT-100
PT-101
PT-102
PT-200
PT-201
PT-202
PT-101 & MT 100
PT-301
WT-400
PT-500
PT-501
PT-502
CT-303
CT-400
CT-500
Z-Clips (optional)
Outside Corner Trim Designs CT-101
Architectural Components Group, Inc.
CT-301
(417) 869-6777
[email protected]
v2.0
Concerto™ System — Aluminum Extrusions Standard Finishes
How To Spec It... Series Thickness
CW1-4824-C Width Black Brushed Bright Dip
Black Buffed Bright Dip
Black Etched
Stainless Brushed Bright Dip
Stainless Buffed Bright Dip
Stainless Etched
Clear Brushed Bright Dip
Height
What It Means... Concerto™ Series 100 48" x 24" panel with ¾" thickness (Please specify desired grain direction).
Clear Etched
LEED CREDIT MR 4.1, MR 4.2, MR 7, EQ 4.4 OPTIONAL TRIM ACGI offers a variety of moldings for perimeter, reveals, ceiling, and base. Trim can be finished to either match or complement the wall panel. FIRE RATING Solid wood finishes and veneer cores can be provided with a Class A fire rating [ASTM-E84]. DELIVERY, STORAGE & HANDLING Material must be stored and installed only in secured ambient environment (humidity range 25%–55%, temperature not to exceed 86°F). All windows, doors and wet-work must be complete before installation. Handle carefully to avoid damaging. WARRANTY All materials supplied by ACGI are guaranteed against manufacturing defects for one year. Wood stains and colorings can vary over time due to job site conditions and are therefore excluded from this warranty. The contractor shall warrant for one year all work from final acceptance of completed work. © 2012 Architectural Components Group, Inc. All Rights Reserved. Information provided is accurate at time of printing. ACGI reserves the right to modify any materials without further notification. All product applications are suggestion only. Always conform with local building codes and safety conditions. ACGI does not accept responsibility for the misuse or improper installation of products. Visit ACGIwood.com for more details. Printed in U.S.A.
Architectural Components Group, Inc.
(417) 869-6777
[email protected]
Series 100-500
The ACGI Concerto™ Wall System is comprised of a series of interchangeable aluminum extrusions with an assortment of reveal conditions. Custom extrusions are also available. The wall system makes it possible to combine most of ACGI’s perforated and solid panel series, such as Encore™ and Flat Panel. Curved panel applications are also available. Concerto™ Wall System is available in five interchangeable series: Series 100 includes various extrusions resulting in a recessed reveal and a variety of trim options. Series 200 extrusions extend to the face of the wall panel resulting in a framed panel system. Series 300 extrusions cover the edges of the panel but create a shallower reveal adding emphasis to the extrusion. Series 400 accentuates thinner architectural panels. The extrusions operate in conjunction with a Z-Clip mounting system to allow easy removal of panels for access. The resulting reveal is recessed to the depth of the panel thickness. Series 500 adds captured panel perimeter extensions.
SP-100 Spline
2
Concerto™ Wall System Series 100 shown with perforated panels and acoustical insulation.
4
3 WT-100 Extrusion
1 Furring Strip PT-100 Extrusion
Architectural Components Group, Inc.
(417) 869-6777
[email protected]
v2.0
v2.0
CONCERTO™ WALL SYSTEM The Concerto™ Wall System is comprised of a
The illustration below shows typical positions
combination of separate aluminum extrusions.
and applications of our extrusions, as well as,
These consist of wall trim and vertical splines,
optional designs. A variety of sizes, shapes,
inside and outside corner trim, and perimeter
and configurations can be easily incorporated
and base trim. A majority of our extrusions are
(including access columns). Please contact ACGI
interchangeable—enabling flexibility in the
or your ACGI Sales Representative for custom
design of any wall project.
applications or special project requirements.
Wall Trim & Spline (Reveal) Designs WT-100 1⁄8"–1⁄2"
1⁄8"–1⁄2"
WT-101 13⁄32"
1⁄2"–11⁄8"
PT-101 & MT-100
1⁄2"
WT-300
PT-202 & ST-688
WT-400 1⁄8"–1"
SP-100 1⁄8"–1"
Inside Corner Trim Designs PT-100 & PT-101
CT-302
WT-400
PT-200
PT-300
PT-400
Base Trim Designs PT-100
Architectural Components Group, Inc.
(417) 869-6777
PT-500
[email protected]
v2.0
Perimeter Trim Designs PT-100
PT-101
PT-102
PT-200
PT-201
PT-202
PT-101 & MT 100
PT-301
WT-400
PT-500
PT-501
PT-502
CT-303
CT-400
CT-500
Z-Clips (optional)
Outside Corner Trim Designs CT-101
Architectural Components Group, Inc.
CT-301
(417) 869-6777
[email protected]
v2.0
Concerto™ System — Aluminum Extrusions Standard Finishes
How To Spec It... Series Thickness
CW1-4824-C Width Black Brushed Bright Dip
Black Buffed Bright Dip
Black Etched
Stainless Brushed Bright Dip
Stainless Buffed Bright Dip
Stainless Etched
Clear Brushed Bright Dip
Height
What It Means... Concerto™ Series 100 48" x 24" panel with ¾" thickness (Please specify desired grain direction).
Clear Etched
LEED CREDIT MR 4.1, MR 4.2, MR 7, EQ 4.4 OPTIONAL TRIM ACGI offers a variety of moldings for perimeter, reveals, ceiling, and base. Trim can be finished to either match or complement the wall panel. FIRE RATING Solid wood finishes and veneer cores can be provided with a Class A fire rating [ASTM-E84]. DELIVERY, STORAGE & HANDLING Material must be stored and installed only in secured ambient environment (humidity range 25%–55%, temperature not to exceed 86°F). All windows, doors and wet-work must be complete before installation. Handle carefully to avoid damaging. WARRANTY All materials supplied by ACGI are guaranteed against manufacturing defects for one year. Wood stains and colorings can vary over time due to job site conditions and are therefore excluded from this warranty. The contractor shall warrant for one year all work from final acceptance of completed work. © 2012 Architectural Components Group, Inc. All Rights Reserved. Information provided is accurate at time of printing. ACGI reserves the right to modify any materials without further notification. All product applications are suggestion only. Always conform with local building codes and safety conditions. ACGI does not accept responsibility for the misuse or improper installation of products. Visit ACGIwood.com for more details. Printed in U.S.A.
Architectural Components Group, Inc.
(417) 869-6777
[email protected]
