cook chill vertical tumble chillers - Cleveland Range
Project ________________________________ Item __________________________________ Quantity _______________________________ FCSI Section ____________________________
COOK CHILL SYSTEMS
Approval _______________________________ Date __________________________________
COOK CHILL VERTICAL TUMBLE CHILLERS
MODELS:
c P-TC-220 c P-TC-320
Cleveland Standard Features ■ Load capacity for up to 220 or 320 gallons of packaged product. ■ All stainless steel construction throughout ■ Touch screen user interface for: ● Start/Stop ● Chill Cycle rotation ● Oscillation mode ● Cleaning cycle ● Digital temperature display ● 99-minute digital countdown timer ● Cycle completion light ■ Fully-insulated, large stainless steel, perforated rotating drum
51” or 65” diameter by 43” long, driven by a Eurodrive motor at 7 RPM. ■ Heavy-duty front loading door with water tight seal and automatic safety lock. ■ Angled loading chute. ■ Full drum rotation or oscillation mode for delicate products.
Model P-TC-220 shown with optional Re-use Tank, left-hand controls and right-hand door hinge
■ Pre-piped, efficient built-in “plate type heat-exchanger” with backflush cleaning feature. ■ Pre-piped, built-in 1 1/2 HP water circulation pump. ■ Large in-line basket strainer for chilled water loop to protect heatexchanger. ■ Automatic water fill with level settings for full and half product load. ■ Air powered solenoid valves. ■ Automatic dispenser for sanitizing solution. ■ Hot water connection for drum cleaning (No steam hookup required). ■ Pre-piped for single point connections to utilities. ■ Available with left or right hand operating controls.
Short Form Specifications Shall be CLEVELAND Model P-TC-___, COOK CHILL VERTICAL TUMBLE CHILLER; All stainless steel construction; capacity for up to ___ gallons of product load; fully-insulated ___” diameter by 43” long perforated drum; built-in plate heat-exchanger; automatic dispenser for sanitizing solution; solid state controls for full drum rotation; oscillation mode; cleaning cycle; digital temperature display; countdown timer; two water level set points; hot water for cleaning. (No steam hook-up required.)
■ Available with left or right door hinging ■ Accepted for use in USDA inspected facilities.
Condensing Units for Ice Builders
■ NSF/ANSI Standard 169 approved.
Ice Water Control Panel Lockable cover over controls
Options & Accessories
Chart Recorder
Stainless steel chilled water re-use tank, mounted on top of machine for space savings.
Flow Meter for chilled water loop
Product landing table Conveyor for automatic product loading
Large Size Strainer 208/3/60; 240/3/60 & 460/3/60 electric voltages 380/3/50 or 575/3/60 export voltages Glycol loops with air-cooled condensing units
Right hand controls (left hand door hinge)
SECT.
Ice Builders
18301 St. Clair Street
Tel: 1-216-481-4900
Cleveland, Ohio, U.S.A. 44110
Fax: 1-216-481-3782
Web Site: www.ClevelandRange.com
XIV PAGE 29
CLE_6043A 0716
4"
L M
MINIMUM CLEARANCE
ELECTRICAL BOX
FRONT 60” REAR 24” SIDE* 12” * 36” for electrical access on one side
STRAINER
8" RECOMMENDED FLOOR SINK
Ø5"
Ø5/8"
Ø3 7/8"
F G
FLOOR FLANGE DETAIL
H
PLAN VIEW WATER RE-USE TANK (OPTIONAL)
J
CONTROL PANEL
CONTROL POWER OFF ON
B D
CW
HW
C
A
E
A
D K
BACK VIEW
FRONT VIEW
SPECIFY LEFT OR RIGHT HAND DOOR HINGING
DIMENSIONS MODEL
A
B
C
D
F
E
H
G
J
K
L
M
P-TC-220
98"
84"
63"
77"
53-1/2"
82"
107"
115"
64"
62"
80"
35"
P-TC-320
109"
95"
63"
88"
62"
90"
116"
131"
80"
78"
88"
49"
Shipping Weight
Crate Size
UTILITY CONNECTIONS
MODEL
COOLING FLUID IN*
HOT WATER COOLING COLD BACK FLUID POTABLE FLUSH IN RETURN* WATER CW
P-TC-220 P-TC-320
1 1/2" NPT 1 1/2" NPT 75 GPM 2" NPT 80 GPM
2" NPT
BF1
AIR INLET
TANK DRAIN
A
D
ELECTRICAL 208V 460V 3PH-60Hz 3PH-60Hz
Approximate
1" NPT 30 GPM
1" NPT 1/2" 1 1/2" 25 GPM 1 CFM/65 PSI 30 GMP
17 AMP
9 AMP
WITH RE-USE TANK 5,000 lbs 70"W x 132"L x 86"H WITHOUT RE-USE TANK 4,800 lbs 68"W x 120"L x 86"H
1" NPT 30 GPM
1" NPT 1 1/2" 1/2" 25 GPM 1 CFM/65 PSI 30 GMP
28 AMP
9 AMP
WITH RE-USE TANK 7,500 lbs 86"W x 135"L x 99"H WITHOUT RE-USE TANK 7,300 lbs 86"W x 135"L x 99"H
* Cooling fluid can be a chilled glycol solution or chilled water from an ice builder. * Flow meter REQUIRED ON COOLING FLUID RETURN LINE. NOTE: 1. All designs, specifications and dimensions subject to change without notice. 2. The pressure drop is 12-15 PSI for steam and cooling fluid passing thru the Tumble Chiller. Cleveland Range reserves right of design improvement or modification, as warranted.
(NOT TO SCALE)
SECT.
XIV PAGE 30 CLE_6043A 0716 Litho in USA
COOK CHILL SYSTEMS
Approval _______________________________ Date __________________________________
COOK CHILL VERTICAL TUMBLE CHILLERS
MODELS:
c P-TC-220 c P-TC-320
Cleveland Standard Features ■ Load capacity for up to 220 or 320 gallons of packaged product. ■ All stainless steel construction throughout ■ Touch screen user interface for: ● Start/Stop ● Chill Cycle rotation ● Oscillation mode ● Cleaning cycle ● Digital temperature display ● 99-minute digital countdown timer ● Cycle completion light ■ Fully-insulated, large stainless steel, perforated rotating drum
51” or 65” diameter by 43” long, driven by a Eurodrive motor at 7 RPM. ■ Heavy-duty front loading door with water tight seal and automatic safety lock. ■ Angled loading chute. ■ Full drum rotation or oscillation mode for delicate products.
Model P-TC-220 shown with optional Re-use Tank, left-hand controls and right-hand door hinge
■ Pre-piped, efficient built-in “plate type heat-exchanger” with backflush cleaning feature. ■ Pre-piped, built-in 1 1/2 HP water circulation pump. ■ Large in-line basket strainer for chilled water loop to protect heatexchanger. ■ Automatic water fill with level settings for full and half product load. ■ Air powered solenoid valves. ■ Automatic dispenser for sanitizing solution. ■ Hot water connection for drum cleaning (No steam hookup required). ■ Pre-piped for single point connections to utilities. ■ Available with left or right hand operating controls.
Short Form Specifications Shall be CLEVELAND Model P-TC-___, COOK CHILL VERTICAL TUMBLE CHILLER; All stainless steel construction; capacity for up to ___ gallons of product load; fully-insulated ___” diameter by 43” long perforated drum; built-in plate heat-exchanger; automatic dispenser for sanitizing solution; solid state controls for full drum rotation; oscillation mode; cleaning cycle; digital temperature display; countdown timer; two water level set points; hot water for cleaning. (No steam hook-up required.)
■ Available with left or right door hinging ■ Accepted for use in USDA inspected facilities.
Condensing Units for Ice Builders
■ NSF/ANSI Standard 169 approved.
Ice Water Control Panel Lockable cover over controls
Options & Accessories
Chart Recorder
Stainless steel chilled water re-use tank, mounted on top of machine for space savings.
Flow Meter for chilled water loop
Product landing table Conveyor for automatic product loading
Large Size Strainer 208/3/60; 240/3/60 & 460/3/60 electric voltages 380/3/50 or 575/3/60 export voltages Glycol loops with air-cooled condensing units
Right hand controls (left hand door hinge)
SECT.
Ice Builders
18301 St. Clair Street
Tel: 1-216-481-4900
Cleveland, Ohio, U.S.A. 44110
Fax: 1-216-481-3782
Web Site: www.ClevelandRange.com
XIV PAGE 29
CLE_6043A 0716
4"
L M
MINIMUM CLEARANCE
ELECTRICAL BOX
FRONT 60” REAR 24” SIDE* 12” * 36” for electrical access on one side
STRAINER
8" RECOMMENDED FLOOR SINK
Ø5"
Ø5/8"
Ø3 7/8"
F G
FLOOR FLANGE DETAIL
H
PLAN VIEW WATER RE-USE TANK (OPTIONAL)
J
CONTROL PANEL
CONTROL POWER OFF ON
B D
CW
HW
C
A
E
A
D K
BACK VIEW
FRONT VIEW
SPECIFY LEFT OR RIGHT HAND DOOR HINGING
DIMENSIONS MODEL
A
B
C
D
F
E
H
G
J
K
L
M
P-TC-220
98"
84"
63"
77"
53-1/2"
82"
107"
115"
64"
62"
80"
35"
P-TC-320
109"
95"
63"
88"
62"
90"
116"
131"
80"
78"
88"
49"
Shipping Weight
Crate Size
UTILITY CONNECTIONS
MODEL
COOLING FLUID IN*
HOT WATER COOLING COLD BACK FLUID POTABLE FLUSH IN RETURN* WATER CW
P-TC-220 P-TC-320
1 1/2" NPT 1 1/2" NPT 75 GPM 2" NPT 80 GPM
2" NPT
BF1
AIR INLET
TANK DRAIN
A
D
ELECTRICAL 208V 460V 3PH-60Hz 3PH-60Hz
Approximate
1" NPT 30 GPM
1" NPT 1/2" 1 1/2" 25 GPM 1 CFM/65 PSI 30 GMP
17 AMP
9 AMP
WITH RE-USE TANK 5,000 lbs 70"W x 132"L x 86"H WITHOUT RE-USE TANK 4,800 lbs 68"W x 120"L x 86"H
1" NPT 30 GPM
1" NPT 1 1/2" 1/2" 25 GPM 1 CFM/65 PSI 30 GMP
28 AMP
9 AMP
WITH RE-USE TANK 7,500 lbs 86"W x 135"L x 99"H WITHOUT RE-USE TANK 7,300 lbs 86"W x 135"L x 99"H
* Cooling fluid can be a chilled glycol solution or chilled water from an ice builder. * Flow meter REQUIRED ON COOLING FLUID RETURN LINE. NOTE: 1. All designs, specifications and dimensions subject to change without notice. 2. The pressure drop is 12-15 PSI for steam and cooling fluid passing thru the Tumble Chiller. Cleveland Range reserves right of design improvement or modification, as warranted.
(NOT TO SCALE)
SECT.
XIV PAGE 30 CLE_6043A 0716 Litho in USA
