CorelDRAW 12/X3/X4
Epson SureColor T3200/3270/5200/5270/7200/7270 WinProfile Print Setup Guide: CorelDRAW 12/X3/X4 IMPORTANT: Before proceeding, ensure the correct Epson printer driver and SubliJet-E WinProfile have been installed. For assistance with profile installation, refer to the Installation and Configuration Guide. NOTE: Your screens and menus may differ depending on the version of software and operating system being used. However, the settings will be identical.
CorelDRAW Workspace Setup 1)
Open a New Document in CorelDRAW (see FIGURE 1).
FIGURE 1
2)
In the Menu Bar, click Tools > Color Management (see FIGURE 2).
A B
FIGURE 2
PAGE 1 of 5 >>
v20150122
SubliJet-E: Epson SC T3200/3270/5200/5270/7200/7270
WinProfile Print Setup Guide: CorelDRAW 12/X3/X4 3)
In the Color Management window that opens, match your settings to those shown below (see FIGURE 3).
Custom (Current settings not saved)
G
A
E
H
Sawgrass_ESCT-3200-5200-72003270-5270-7270_SJE_RGB_Win_v1.0
F D
B
C
I L
FIGURE 3
A. Click on the Import/Export “paper stack” icon (see FIGURE 3). This will open the Advanced Import/Export Settings window. Match your settings to those shown below: (see FIGURE 4)
a
b
c
d
FIGURE 4
e
a. Click the radio button for Always convert using b. Click the drop-down arrow and select Internal RGB - Fraser (1998) c. Click the radio button for Always embed using d. Click the drop-down arrow and select Internal RGB - Fraser (1998) e. Click OK to continue PAGE 2 of 5 >>
SubliJet-E: Epson SC T3200/3270/5200/5270/7200/7270
WinProfile Print Setup Guide: CorelDRAW 12/X3/X4 B. Click the drop-down arrow for composite printer and select Sawgrass_ESCT-3200-5200-72003270-5270-7270_SJE_RGB_Win_v1.0 (see FIGURE 3). NOTE: If the profile is not visible in the drop-down menu, try restarting CorelDRAW. If the profile is still missing after restarting the application, refer to the Installation and Configuration Guide. C. Click the drop-down arrow for monitor and select Generic Profile (see FIGURE 3). NOTE: For better accuracy select the profile for your particular computer monitor. If that profile is not already installed, check the website of your monitor manufacturer. D. Click the drop-down arrow for separations printer and select Generic offset separations profile (see FIGURE 3). E. Click the drop-down arrow for scanner/digital camera and select Generic profile (see FIGURE 3). NOTE: For better accuracy select the profile for your particular scanner/camera. If that profile is not already installed, check the website of your scanner/camera manufacturer. F. Click the drop-down arrow under the “three circles” icon and select Internal RGB - Fraser (1998) (see FIGURE 3). G. Click on the “three circles” icon (see FIGURE 3). This will open the Advanced Settings window. Match your settings to those shown below: (see FIGURE 5)
a b FIGURE 5
c
a. Rendering Intent: Perceptual b. Color Engine: Microsoft ICM CMM c. Click OK to continue. H. Set all Orange/Grey arrows as shown in FIGURE 3. To change the color of a particular arrow, simply click on the arrow to toggle back and forth. All need to be Orange. I. Lasty, click the radio button for RGB (see FIGURE 3).
PAGE 3 of 5 >>
SubliJet-E: Epson SC T3200/3270/5200/5270/7200/7270
WinProfile Print Setup Guide: CorelDRAW 12/X3/X4 J. Click the Save icon (see FIGURE 6).
FIGURE 6
K. This will open the Save Color Management Style window below (see FIGURE 7).
SAWGRASS
a b
FIGURE 7
a. Name your new color style for easy identification b. Click OK to continue L. Back in the color management window, click OK (see FIGURE 3).
Printing from CorelDRAW with the Epson SC-T3200/5200/7200 Series 4)
After opening or importing an image with the correct Color settings entered, you are now ready to print. In the Menu Bar, click File > Print. This will open the Print window. Select the Epson SC-T3200/5200/7200 Series printer in the dropdown (see FIGURE 8).
EPSON SC-T3200/5200/7200 Series EPSON SC-T3200 Series
FIGURE 8 PAGE 4 of 5 >>
SubliJet-E: Epson SC T3200/3270/5200/5270/7200/7270
WinProfile Print Setup Guide: CorelDRAW 12/X3/X4 5)
In the Print window, click the Misc tab and match your settings to those shown below (see FIGURE 9).
A (Sawgrass_ESCT-3200-5200-7200-3270-5270-7270_SJE_RGB_Win_v1.0 - Model unspecified)
B C
E
D
F G
I
FIGURE 9
H
A. Apply ICC profile: Check box and confirm the SubliJet profile that you selected B. Proofing options: Check Print vectors C. Proofing options: Check Print bitmaps D. Proofing options: Check Print text E. Click the radio button for Full color F. Output color bitmaps as: RGB G. Fountain steps: 256 H. Click Apply to save your changes I. Click Print when you are ready to print your image CorelDRAW setup is now complete. Be sure to select the Epson SC-T3200/5200/7200 Series each time you print. For the absolute latest information and updates on all products, materials, processes and/or procedures relative to all offerings by or through Sawgrass Technologies, Inc., refer to our website: www.sawgrassink.com
PAGE 5 of 5 >>
CorelDRAW Workspace Setup 1)
Open a New Document in CorelDRAW (see FIGURE 1).
FIGURE 1
2)
In the Menu Bar, click Tools > Color Management (see FIGURE 2).
A B
FIGURE 2
PAGE 1 of 5 >>
v20150122
SubliJet-E: Epson SC T3200/3270/5200/5270/7200/7270
WinProfile Print Setup Guide: CorelDRAW 12/X3/X4 3)
In the Color Management window that opens, match your settings to those shown below (see FIGURE 3).
Custom (Current settings not saved)
G
A
E
H
Sawgrass_ESCT-3200-5200-72003270-5270-7270_SJE_RGB_Win_v1.0
F D
B
C
I L
FIGURE 3
A. Click on the Import/Export “paper stack” icon (see FIGURE 3). This will open the Advanced Import/Export Settings window. Match your settings to those shown below: (see FIGURE 4)
a
b
c
d
FIGURE 4
e
a. Click the radio button for Always convert using b. Click the drop-down arrow and select Internal RGB - Fraser (1998) c. Click the radio button for Always embed using d. Click the drop-down arrow and select Internal RGB - Fraser (1998) e. Click OK to continue PAGE 2 of 5 >>
SubliJet-E: Epson SC T3200/3270/5200/5270/7200/7270
WinProfile Print Setup Guide: CorelDRAW 12/X3/X4 B. Click the drop-down arrow for composite printer and select Sawgrass_ESCT-3200-5200-72003270-5270-7270_SJE_RGB_Win_v1.0 (see FIGURE 3). NOTE: If the profile is not visible in the drop-down menu, try restarting CorelDRAW. If the profile is still missing after restarting the application, refer to the Installation and Configuration Guide. C. Click the drop-down arrow for monitor and select Generic Profile (see FIGURE 3). NOTE: For better accuracy select the profile for your particular computer monitor. If that profile is not already installed, check the website of your monitor manufacturer. D. Click the drop-down arrow for separations printer and select Generic offset separations profile (see FIGURE 3). E. Click the drop-down arrow for scanner/digital camera and select Generic profile (see FIGURE 3). NOTE: For better accuracy select the profile for your particular scanner/camera. If that profile is not already installed, check the website of your scanner/camera manufacturer. F. Click the drop-down arrow under the “three circles” icon and select Internal RGB - Fraser (1998) (see FIGURE 3). G. Click on the “three circles” icon (see FIGURE 3). This will open the Advanced Settings window. Match your settings to those shown below: (see FIGURE 5)
a b FIGURE 5
c
a. Rendering Intent: Perceptual b. Color Engine: Microsoft ICM CMM c. Click OK to continue. H. Set all Orange/Grey arrows as shown in FIGURE 3. To change the color of a particular arrow, simply click on the arrow to toggle back and forth. All need to be Orange. I. Lasty, click the radio button for RGB (see FIGURE 3).
PAGE 3 of 5 >>
SubliJet-E: Epson SC T3200/3270/5200/5270/7200/7270
WinProfile Print Setup Guide: CorelDRAW 12/X3/X4 J. Click the Save icon (see FIGURE 6).
FIGURE 6
K. This will open the Save Color Management Style window below (see FIGURE 7).
SAWGRASS
a b
FIGURE 7
a. Name your new color style for easy identification b. Click OK to continue L. Back in the color management window, click OK (see FIGURE 3).
Printing from CorelDRAW with the Epson SC-T3200/5200/7200 Series 4)
After opening or importing an image with the correct Color settings entered, you are now ready to print. In the Menu Bar, click File > Print. This will open the Print window. Select the Epson SC-T3200/5200/7200 Series printer in the dropdown (see FIGURE 8).
EPSON SC-T3200/5200/7200 Series EPSON SC-T3200 Series
FIGURE 8 PAGE 4 of 5 >>
SubliJet-E: Epson SC T3200/3270/5200/5270/7200/7270
WinProfile Print Setup Guide: CorelDRAW 12/X3/X4 5)
In the Print window, click the Misc tab and match your settings to those shown below (see FIGURE 9).
A (Sawgrass_ESCT-3200-5200-7200-3270-5270-7270_SJE_RGB_Win_v1.0 - Model unspecified)
B C
E
D
F G
I
FIGURE 9
H
A. Apply ICC profile: Check box and confirm the SubliJet profile that you selected B. Proofing options: Check Print vectors C. Proofing options: Check Print bitmaps D. Proofing options: Check Print text E. Click the radio button for Full color F. Output color bitmaps as: RGB G. Fountain steps: 256 H. Click Apply to save your changes I. Click Print when you are ready to print your image CorelDRAW setup is now complete. Be sure to select the Epson SC-T3200/5200/7200 Series each time you print. For the absolute latest information and updates on all products, materials, processes and/or procedures relative to all offerings by or through Sawgrass Technologies, Inc., refer to our website: www.sawgrassink.com
PAGE 5 of 5 >>
