crown jewel - TRI-KES
upholstery
crown jewel WIDTH 54" (137 cm) CONTENTS 83% polyester, 17% cotton BACKING Acrylic FINISH Stain repellent ABRASION RESISTANCE ASTM D4157: 100,000 double rubs FIRE TEST
Cal TB 117: meets requirements UFAC/NFPA 260: Class I COLORFASTNESS
AATCC-8 Colorfastness to Wet & Dry Crocking: meets requirements Colorfastness to Water & Solvents: meets requirements AATCC-16 Colorfastness to Light: meets requirements, 40 hours TEAR STRENGTH ASTM D2261: meets requirements TENSILE STRENGTH ASTM D5034: meets requirements ADDITIONAL TESTS
ASTM D3511 Pilling: meets requirements ASTM D4034 Seam Slippage: meets requirements SPECIAL NOTE As with all velvets, shading and mottling are natural characteristics inherent to the beauty of the textile WARRANTY Material is warranted to be free of defects in workmanship for a period of one year. Materials comply with ACT Standards and are suitable for the intended use. CLEANING CODE S (solvent or dry cleaning products) ~ To prevent overall soiling, frequent vacuuming or light brushing to remove dust and grime is recommended. Spot clean using a mild water-free solvent or dry cleaning product. Clean only in a well ventilated room and avoid any product containing carbon tetrachloride which is highly toxic. Pretest small area before proceeding. CUSTOM COLORS AVAILABLE THIS FABRIC MEETS OR EXCEEDS ACT STANDARDS
ŃßøÍ
© 2013 Wall Source LLC
crown jewel WIDTH 54" (137 cm) CONTENTS 83% polyester, 17% cotton BACKING Acrylic FINISH Stain repellent ABRASION RESISTANCE ASTM D4157: 100,000 double rubs FIRE TEST
Cal TB 117: meets requirements UFAC/NFPA 260: Class I COLORFASTNESS
AATCC-8 Colorfastness to Wet & Dry Crocking: meets requirements Colorfastness to Water & Solvents: meets requirements AATCC-16 Colorfastness to Light: meets requirements, 40 hours TEAR STRENGTH ASTM D2261: meets requirements TENSILE STRENGTH ASTM D5034: meets requirements ADDITIONAL TESTS
ASTM D3511 Pilling: meets requirements ASTM D4034 Seam Slippage: meets requirements SPECIAL NOTE As with all velvets, shading and mottling are natural characteristics inherent to the beauty of the textile WARRANTY Material is warranted to be free of defects in workmanship for a period of one year. Materials comply with ACT Standards and are suitable for the intended use. CLEANING CODE S (solvent or dry cleaning products) ~ To prevent overall soiling, frequent vacuuming or light brushing to remove dust and grime is recommended. Spot clean using a mild water-free solvent or dry cleaning product. Clean only in a well ventilated room and avoid any product containing carbon tetrachloride which is highly toxic. Pretest small area before proceeding. CUSTOM COLORS AVAILABLE THIS FABRIC MEETS OR EXCEEDS ACT STANDARDS
ŃßøÍ
© 2013 Wall Source LLC
