ct10 datasheet_Final.qxp
CT10
Wide-Dispersion Speaker for 8” Installations Recommended Installations: • Suspended ceilings • Wood or metal stud ceilings • Soffits • Retrofit into almost all standard 8” speaker openings
Recommended Environment: • Indoor or weather-protected outdoor
Recommended Accessories: • PBB8-10 Backcan • UMB8-10 Universal mounting bracket • ECS8-10 Enclosure compensation module
HIGH QUALITY, WIDE DISPERSION LOUDSPEAKER
Installation Example: PBB8-10 Backcan (w/hang straps) UMB8-10 Universal Mounting Bracket
The Sound Advance® CT10 is a unique, extended bandwidth, wide-dispersion planar loudspeaker designed for use in commercial installations. Concealed mounting hardware results in a more discreet appearance than conventonal speakers. Patented Planar Diaphragm Technology™ allows a CT10 that has been properly installed in a ceiling boundary to radiate sound in a 140° hemispherical pattern with smooth, even coverage. This dispersion characteristic allows CT10 speakers to be spaced farther apart than narrow-dispersion conventional speakers, reducing the total quantity of loudspeakers required in almost any installation. The CT10 is generally mounted into wood or metal stud ceilings or suspended ceiling tile systems, and will retrofit into almost all existing standard 8” diameter speaker openings. Mounting is by torsion springs, and optional tile bridge and backcan mounting accessories are available. An optional enclosure compensation module is also available, to restore bass performance when the CT10 is installed in a backcan. The flat Expanded Polystyrene® [EPS] loudspeaker surface may be finished with water soluble materials such as latex paints to match almost any decor or color requirement using conventional brush-on, roller or airless spray application systems.
CT10 Speaker
The CT10 is transformer-coupled, with the following taps: 0.5W, 1W, 2W, 4W, 8W, 16W, and 8-ohm bypass.
Warranty: Sound Advance® warrantees the CT10 to be free of any defect in material of workmanship for a period of 5 years from the date of purchase. During the warranty period, Sound Advance will repair or replace (at its option) all such defects without charge for parts or labor, if returned prepaid to the proper Sound Advance service facility, together with the original sales receipt or other proof of purchase. The unit will be returned prepaid.
CT10
Wide-Dispersion Speaker for 8” Installations Polar Response: 50dB 90°
40dB
30dB
20dB
10dB
0dB
500Hz
0dB
10dB
20dB
30dB
40dB
30dB
20dB
10dB
0dB
2kHz
0dB
10dB
20dB
30dB
40dB
50dB
50dB 90°
270°
0dB
8kHz
0dB
10dB
20dB
0dB
40dB
30dB
20dB
40dB
60°
10dB
0dB
4kHz
0dB
10dB
20dB
30dB
40dB
50dB 90°
50dB
40dB
50dB 270°
300°
330°
4kHz
30dB
20dB
10dB
0dB
16kHz
0dB
10dB
20dB
30dB
40dB
300°
8kHz
50 25
50 dB
40
40
30
30
20
20
10
10
0
0 100
200
500
1kHz
Driver System:
0.82 lb (0.37 kg) Magnet with 1.02” (26mm) voice coil
Frequency Response:
80Hz – 15kHz ±4dB
Power Rating:
20 Watts RMS as per EIA Standard RS-426-A
Pressure Sensitivity:
94dB, 1W/1m
Maximum Output:
106dB @ 1 meter
2
5
10
20kHz
Measured in an Infinite Baffle Enclosure
8 ohms nominal; 5.5 ohms minimum
Transformer:
Primary Voltage — 70.7 Volts Primary Taps — 0.5, 1, 2, 4, 8, 16 Watts; 8 ohm bypass
Dimensions (Dia x D):
13” x 23/8” (330mm x 60mm)
16kHz
0°
dB
50
125 in2 (806.5cm2) Planar Diaphragm (fits standard 8” diameter speaker openings)
330°
On-Axis Frequency Response:
20 Hz
Radiating Surface:
System Impedance:
50dB 270°
60°
30°
330°
50dB
1kHz
0°
300°
0°
40dB
270°
30°
30dB
30dB
20dB
60°
270°
30°
10dB
330°
2kHz
0°
1kHz
300°
330°
10dB
0dB
0°
300°
20dB
10dB
500Hz
30°
30dB
20dB
30°
60°
40dB
30dB
330° 0°
40dB
40dB
60°
300°
30°
50dB 90°
50dB 90°
270°
60°
50dB 90°
Performance Specifications:
50dB
Product Weight:
4.3 lbs. (1.9kg) each
Shipping Weight:
6 lbs. (2.73kg) each
Architects and Engineers Specification: The loudspeaker shall be a full-range device, producing frequencies from 80Hz to 15kHz in both horizontal and vertical planes. Total radiating surface shall be 125 in2 (806.5cm2). The high-frequency dispersion shall be at least 140° up to 15kHz in both horizontal and vertical planes. The loudspeaker shall have a sensitivity of 94dB (1W/1m) with a power rating of 20 watts RMS according to EIA standard RS-426-A. The loudspeaker shall have an exterior frame constructed of stamped steel, with a powder-coated white enamel finish, measuring 13” (330mm) in diameter and a total unit depth of 23/8” (60mm) - not including backcan. Torsion spring mounting facilities shall be concealed from view of the installed speaker. The complete unit shall weigh no more than 4.3 lbs. (1.9kg). The loudspeaker shall be the Sound Advance CT10 or equivalent.
Optional accessories:
212 Avenida Fabricante San Clemente, CA 92672 (800) 592-4644 • (949) 492-5449 FAX: (949) 361-5151
PBB8-10:
Backcan for ducted air return ceilings 12¼” Dia x 4¼” D (311mm x 106mm); 10¼” Cutout Dia (260mm) 1.7 lb (0.7kg)
UMB8-10:
Universal mounting bracket for solid or suspended ceilings 2.7 lb (1.23kg)
ECS8-10:
Line-level enclosure compensation module for installations using the PBB8-10 backcan
www.soundadvance.com ©2006 Sound Advance. All Rights Reserved. Sound Advance and Planar Diaphragm Technology are trademarks or registered trademarks of Dana Innovations. Specifications subject to change without notice. For the latest Sound Advance product information please go to 05/06 www.soundadvance.com
Wide-Dispersion Speaker for 8” Installations Recommended Installations: • Suspended ceilings • Wood or metal stud ceilings • Soffits • Retrofit into almost all standard 8” speaker openings
Recommended Environment: • Indoor or weather-protected outdoor
Recommended Accessories: • PBB8-10 Backcan • UMB8-10 Universal mounting bracket • ECS8-10 Enclosure compensation module
HIGH QUALITY, WIDE DISPERSION LOUDSPEAKER
Installation Example: PBB8-10 Backcan (w/hang straps) UMB8-10 Universal Mounting Bracket
The Sound Advance® CT10 is a unique, extended bandwidth, wide-dispersion planar loudspeaker designed for use in commercial installations. Concealed mounting hardware results in a more discreet appearance than conventonal speakers. Patented Planar Diaphragm Technology™ allows a CT10 that has been properly installed in a ceiling boundary to radiate sound in a 140° hemispherical pattern with smooth, even coverage. This dispersion characteristic allows CT10 speakers to be spaced farther apart than narrow-dispersion conventional speakers, reducing the total quantity of loudspeakers required in almost any installation. The CT10 is generally mounted into wood or metal stud ceilings or suspended ceiling tile systems, and will retrofit into almost all existing standard 8” diameter speaker openings. Mounting is by torsion springs, and optional tile bridge and backcan mounting accessories are available. An optional enclosure compensation module is also available, to restore bass performance when the CT10 is installed in a backcan. The flat Expanded Polystyrene® [EPS] loudspeaker surface may be finished with water soluble materials such as latex paints to match almost any decor or color requirement using conventional brush-on, roller or airless spray application systems.
CT10 Speaker
The CT10 is transformer-coupled, with the following taps: 0.5W, 1W, 2W, 4W, 8W, 16W, and 8-ohm bypass.
Warranty: Sound Advance® warrantees the CT10 to be free of any defect in material of workmanship for a period of 5 years from the date of purchase. During the warranty period, Sound Advance will repair or replace (at its option) all such defects without charge for parts or labor, if returned prepaid to the proper Sound Advance service facility, together with the original sales receipt or other proof of purchase. The unit will be returned prepaid.
CT10
Wide-Dispersion Speaker for 8” Installations Polar Response: 50dB 90°
40dB
30dB
20dB
10dB
0dB
500Hz
0dB
10dB
20dB
30dB
40dB
30dB
20dB
10dB
0dB
2kHz
0dB
10dB
20dB
30dB
40dB
50dB
50dB 90°
270°
0dB
8kHz
0dB
10dB
20dB
0dB
40dB
30dB
20dB
40dB
60°
10dB
0dB
4kHz
0dB
10dB
20dB
30dB
40dB
50dB 90°
50dB
40dB
50dB 270°
300°
330°
4kHz
30dB
20dB
10dB
0dB
16kHz
0dB
10dB
20dB
30dB
40dB
300°
8kHz
50 25
50 dB
40
40
30
30
20
20
10
10
0
0 100
200
500
1kHz
Driver System:
0.82 lb (0.37 kg) Magnet with 1.02” (26mm) voice coil
Frequency Response:
80Hz – 15kHz ±4dB
Power Rating:
20 Watts RMS as per EIA Standard RS-426-A
Pressure Sensitivity:
94dB, 1W/1m
Maximum Output:
106dB @ 1 meter
2
5
10
20kHz
Measured in an Infinite Baffle Enclosure
8 ohms nominal; 5.5 ohms minimum
Transformer:
Primary Voltage — 70.7 Volts Primary Taps — 0.5, 1, 2, 4, 8, 16 Watts; 8 ohm bypass
Dimensions (Dia x D):
13” x 23/8” (330mm x 60mm)
16kHz
0°
dB
50
125 in2 (806.5cm2) Planar Diaphragm (fits standard 8” diameter speaker openings)
330°
On-Axis Frequency Response:
20 Hz
Radiating Surface:
System Impedance:
50dB 270°
60°
30°
330°
50dB
1kHz
0°
300°
0°
40dB
270°
30°
30dB
30dB
20dB
60°
270°
30°
10dB
330°
2kHz
0°
1kHz
300°
330°
10dB
0dB
0°
300°
20dB
10dB
500Hz
30°
30dB
20dB
30°
60°
40dB
30dB
330° 0°
40dB
40dB
60°
300°
30°
50dB 90°
50dB 90°
270°
60°
50dB 90°
Performance Specifications:
50dB
Product Weight:
4.3 lbs. (1.9kg) each
Shipping Weight:
6 lbs. (2.73kg) each
Architects and Engineers Specification: The loudspeaker shall be a full-range device, producing frequencies from 80Hz to 15kHz in both horizontal and vertical planes. Total radiating surface shall be 125 in2 (806.5cm2). The high-frequency dispersion shall be at least 140° up to 15kHz in both horizontal and vertical planes. The loudspeaker shall have a sensitivity of 94dB (1W/1m) with a power rating of 20 watts RMS according to EIA standard RS-426-A. The loudspeaker shall have an exterior frame constructed of stamped steel, with a powder-coated white enamel finish, measuring 13” (330mm) in diameter and a total unit depth of 23/8” (60mm) - not including backcan. Torsion spring mounting facilities shall be concealed from view of the installed speaker. The complete unit shall weigh no more than 4.3 lbs. (1.9kg). The loudspeaker shall be the Sound Advance CT10 or equivalent.
Optional accessories:
212 Avenida Fabricante San Clemente, CA 92672 (800) 592-4644 • (949) 492-5449 FAX: (949) 361-5151
PBB8-10:
Backcan for ducted air return ceilings 12¼” Dia x 4¼” D (311mm x 106mm); 10¼” Cutout Dia (260mm) 1.7 lb (0.7kg)
UMB8-10:
Universal mounting bracket for solid or suspended ceilings 2.7 lb (1.23kg)
ECS8-10:
Line-level enclosure compensation module for installations using the PBB8-10 backcan
www.soundadvance.com ©2006 Sound Advance. All Rights Reserved. Sound Advance and Planar Diaphragm Technology are trademarks or registered trademarks of Dana Innovations. Specifications subject to change without notice. For the latest Sound Advance product information please go to 05/06 www.soundadvance.com
