CXB3590 LED - Cree, Inc
Cree® XLamp® CXB3590 LED
CLD-DS126 Rev 0F
Product family data sheet
Product Description
features
Table of Contents
The XLamp® CXB3590 LED Array is
• 30‑mm optical source
Characteristics................................................2
the brightest member of the second
• Mechanical and optical design
Operating Limits..............................................3
generation of the CXA family that
consistent with CXA35 LED
delivers up to 30% higher efficacy and up to 20% higher lumens than the first generation in the same LES. The higher performance second generation CXA LED Arrays provide a drop-in performance
upgrade
to
existing
• Available in 70-, 80- and 90-minimum CRI options • Cree EasyWhite 2-, 3‑ and 5-step ®
binning • Forward voltage options: 36‑V class & 72‑V class
Flux Characteristics, EasyWhite® Order Codes and Bins - 36 V.....................................4 Flux Characteristics, EasyWhite® Order Codes and Bins - 72 V.....................................6 Relative Spectral Power Distribution.............8 Electrical Characteristics................................9 Relative Luminous Flux.................................10
CXA LED designs to shorten product
• 85 °C binning and characterization
Typical Spatial Distribution...........................12
development time. Available in 2‑step,
• Extremely uniform color over
Performance Groups - Brightness...............12
3‑step and 5‑step EasyWhite
®
bins,
viewing angle
Performance Groups - Chromaticity............13
the CXB3590 LED delivers high lumen
• Top-side solder connections
Cree EasyWhite® Bins Plotted on the
output and high efficacy in a single,
• Thermocouple attach point
1931 CIE Curve..............................................14
easy-to-use package that eliminates the
• NEMA SSL-3 2011 standard flux
Bin and Order Code Formats........................15
need for reflow soldering. The CX Family LED Design Guide provides basic information on the
bins
Mechanical Dimensions...............................15
• RoHS- and REACh‑compliant
Thermal Design.............................................16
• UL® recognized component
Notes.............................................................18
(E349212)
Packaging......................................................19
requirements to use the CXB3590 LED
www.cree.com/Xlamp
successfully in luminaire designs.
Copyright © 2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 1
XLamp ® CXB3590 LED
Characteristics Characteristics Viewing angle (FWHM) ESD withstand voltage (HBM per Mil-Std-883D)
Unit degrees
Minimum
Typical
Maximum
115
V
8000
DC forward current (36 V)
mA
3600*
DC forward current (72 V)
mA
1800*
Reverse current (36 V, 72 V )
mA
0.1
Forward voltage (36 V, @ 2400 mA, Tj = 85 °C)
V
36
39
Forward voltage (72 V, @ 1200 mA, Tj = 85 °C)
V
72
78
*
Refer to the Operating Limits section.
Copyright © 2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
2
XLamp ® CXB3590 LED
Operating Limits The maximum current rating of the CXB3590 is dependent on the case temperature (Tc) when the LED has reached thermal equilibrium under steady-state operation. The graphs shown below assume that the system design employs good thermal management (thermal interface material and heat sink) and may vary when poor thermal management is employed. Please refer to the Mechanical Dimensions section on page 15 for the location of the Tc measurement point. 4000 3600 3200 2800
If (mA)
2400
36 V
2000 1600
1200 800 400 0
0
25
50
75
100
125
150
Case Temperature (°C)
CXB3590 2000 1800 1600 1400
If (mA)
1200
72 V
1000 800
600 400 200 0
0
25
50
75
100
125
150
Case Temperature (°C)
Copyright © 2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
3
XLamp ® CXB3590 LED
Flux Characteristics, EasyWhite® Order Codes and Bins - 36 V (If = 2400 mA, TJ = 85 °C) The following table provides order codes for XLamp CXB3590 LEDs. For a complete description of the order code nomenclature, please see the Bin and Order Code Formats section (page 15).
Nominal CCT
CRI* Min
70
Minimum Luminous Flux Typ
Group
Flux (lm) Flux (lm) @ 85 °C @ 25 °C**
CD
12,000
13,237
DB
13,000
14,340
CB
11,000
12,134
2-Step Group
Order Code
3-Step Group
Order Code
---
5-Step Group
65E
6500 K 80
70
5700 K
80
90
70
5000 K
80
90
---
65E
Order Code CXB3590-0000000N0BCD65E CXB3590-0000000N0BDB65E CXB3590-0000000N0HCB65E
CD
12,000
13,237
CXB3590-0000000N0HCD65E
CD
12,000
13,237
CXB3590-0000000N0BCD57E
DB
13,000
14,340
CXB3590-0000000N0BDB57E
CB
11,000
12,134
CXB3590-0000000N0HCB57E
CD
12,000
13,237
BD
10,000
11,031
---
57E
---
57E
92
57G CB
11,000
12,134
CD
12,000
13,237
DB
13,000
14,340
CB
11,000
12,134
CXB3590-0000000N0UBD57G CXB3590-0000000N0UCB57G
---
50E
---
50G
CXB3590-0000000N0HCB50G
CD
12,000
13,237
CXB3590-0000000N0HCD50G
BD
10,000
11,031
CXB3590-0000000N0UBD50G
CB
11,000
12,134
92
50G
CXB3590-0000000N0HCD57E
50E
CXB3590-0000000N0BCD50E CXB3590-0000000N0BDB50E CXB3590-0000000N0HCB50E CXB3590-0000000N0HCD50E
CXB3590-0000000N0UCB50G
Notes • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. See the Measurements section (page 18). • Cree XLamp CXB3590 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * For 80 CRI minimum LEDs, CRI R9 minimum is 0 with a ±2 tolerance. For 90 CRI minimum LEDs, CRI R9 typical is 60. ** Flux values @ 25 °C are calculated and for reference only.
Copyright © 2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
4
XLamp ® CXB3590 LED
Flux Characteristics, EasyWhite® Order Codes and Bins - 36 V (If = 2400 mA, TJ = 85 °C) - Continued Nominal CCT
CRI*
Minimum Luminous Flux
Min
Typ
70
---
Group CD
4000 K
80
90
80
Flux (lm) Flux (lm) @ 85 °C @ 25 °C** 12,000
2-Step Group
80
80
DB
13,000
14,340
CB
11,000
12,134
CD
12,000
13,237
CXB3590-0000000N0HCD40H
BB
9,500
10,479
CXB3590-0000000N0UBB40H
BD
10,000
11,031
CB
11,000
12,134
---
40H
92
40H
---
35H
CXB3590-0000000N0HCB40H
CXB3590-0000000N0UBD40H CXB3590-0000000N0HCB35H
CD
12,000
13,237
CXB3590-0000000N0HCD35H
BB
9,500
10,479
CXB3590-0000000N0UBB35H
BD
10,000
11,031
BD
10,000
11,031
92
35H
---
30H
CXB3590-0000000N0UBD35H CXB3590-0000000N0HBD30H
CB
11,000
12,134
CXB3590-0000000N0HCB30H
BB
9,500
10,479
CXB3590-0000000N0UBB30H
BD
10,000
11,031
CXB3590-0000000N0UBD30H
BD
10,000
11,031
CXB3590-0000000N0HBD27H
CB
11,000
12,134
AD
9,000
9,928
92
30H
---
27H
2700 K 90
Order Code
Group
40E
3000 K 90
Group
5-Step
13,237
3500 K 90
Order Code
3-Step
92
27H BB
9,500
10,479
CXB3590-0000000N0HCB27H CXB3590-0000000N0UAD27H CXB3590-0000000N0UBB27H
40G
40G
35G
35G
30G
30G
27G
27G
Order Code CXB3590-0000000N0BCD40E CXB3590-0000000N0BDB40E
CXB3590-0000000N0HCB40G CXB3590-0000000N0HCD40G CXB3590-0000000N0UBB40G CXB3590-0000000N0UBD40G CXB3590-0000000N0HCB35G CXB3590-0000000N0HCD35G CXB3590-0000000N0UBB35G CXB3590-0000000N0UBD35G CXB3590-0000000N0HBD30G CXB3590-0000000N0HCB30G CXB3590-0000000N0UBB30G CXB3590-0000000N0UBD30G CXB3590-0000000N0HBD27G CXB3590-0000000N0HCB27G CXB3590-0000000N0UAD27G CXB3590-0000000N0UBB27G
Notes • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. See the Measurements section (page 18). • Cree XLamp CXB3590 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * For 80 CRI minimum LEDs, CRI R9 minimum is 0 with a ±2 tolerance. For 90 CRI minimum LEDs, CRI R9 typical is 60. ** Flux values @ 25 °C are calculated and for reference only.
Copyright © 2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
5
XLamp ® CXB3590 LED
Flux Characteristics, EasyWhite® Order Codes and Bins - 72 V (If = 1200 mA, TJ = 85 °C) The following table provides order codes for XLamp CXB3590 LEDs. For a complete description of the order code nomenclature, please see the Bin and Order Code Formats section (page 15).
Nominal CCT
CRI* Min
70
Minimum Luminous Flux Typ
Group
Flux (lm) Flux (lm) @ 85 °C @ 25 °C**
CD
12,000
13,237
DB
13,000
14,340
CB
11,000
12,134
2-Step Group
Order Code
3-Step Group
Order Code
---
5-Step Group
65E
6500 K 80
70
5700 K
80
90
70
5000 K
80
90
---
65E
Order Code CXB3590-0000000R0BCD65E CXB3590-0000000R0BDB65E CXB3590-0000000R0HCB65E
CD
12,000
13,237
CXB3590-0000000R0HCD65E
CD
12,000
13,237
CXB3590-0000000R0BCD57E
DB
13,000
14,340
CXB3590-0000000R0BDB57E
CB
11,000
12,134
CXB3590-0000000R0HCB57E
CD
12,000
13,237
BD
10,000
11,031
---
57E
---
57E
92
57G CB
11,000
12,134
CD
12,000
13,237
DB
13,000
14,340
CB
11,000
12,134
CXB3590-0000000R0UBD57G CXB3590-0000000R0UCB57G
---
50E
---
50G
CXB3590-0000000R0HCB50G
CD
12,000
13,237
CXB3590-0000000R0HCD50G
BD
10,000
11,031
CXB3590-0000000R0UBD50G
CB
11,000
12,134
92
50G
CXB3590-0000000R0HCD57E
50E
CXB3590-0000000R0BCD50E CXB3590-0000000R0BDB50E CXB3590-0000000R0HCB50E CXB3590-0000000R0HCD50E
CXB3590-0000000R0UCB50G
Notes • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. See the Measurements section (page 18). • Cree XLamp CXB3590 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * For 80 CRI minimum LEDs, CRI R9 minimum is 0 with a ±2 tolerance. For 90 CRI minimum LEDs, CRI R9 typical is 60. ** Flux values @ 25 °C are calculated and for reference only.
Copyright © 2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
6
XLamp ® CXB3590 LED
Flux Characteristics, EasyWhite® Order Codes and Bins - 72 V (If = 1200 mA, TJ = 85 °C) - Continued Nominal CCT
CRI*
Minimum Luminous Flux
Min
Typ
70
---
Group CD
4000 K
80
90
80
Flux (lm) Flux (lm) @ 85 °C @ 25 °C** 12,000
2-Step Group
80
80
DB
13,000
14,340
CB
11,000
12,134
CD
12,000
13,237
CXB3590-0000000R0HCD40H
BB
9,500
10,479
CXB3590-0000000R0UBB40H
BD
10,000
11,031
CB
11,000
12,134
---
40H
92
40H
---
35H
CXB3590-0000000R0HCB40H
CXB3590-0000000R0UBD40H CXB3590-0000000R0HCB35H
CD
12,000
13,237
CXB3590-0000000R0HCD35H
BB
9,500
10,479
CXB3590-0000000R0UBB35H
BD
10,000
11,031
BD
10,000
11,031
92
35H
---
30H
CXB3590-0000000R0UBD35H CXB3590-0000000R0HBD30H
CB
11,000
12,134
CXB3590-0000000R0HCB30H
BB
9,500
10,479
CXB3590-0000000R0UBB30H
BD
10,000
11,031
CXB3590-0000000R0UBD30H
BD
10,000
11,031
CXB3590-0000000R0HBD27H
CB
11,000
12,134
AD
9,000
9,928
92
30H
---
27H
2700 K 90
Order Code
Group
40E
3000 K 90
Group
5-Step
13,237
3500 K 90
Order Code
3-Step
92
27H BB
9,500
10,479
CXB3590-0000000R0HCB27H CXB3590-0000000R0UAD27H CXB3590-0000000R0UBB27H
40G
40G
35G
35G
30G
30G
27G
27G
Order Code CXB3590-0000000R0BCD40E CXB3590-0000000R0BDB40E
CXB3590-0000000R0HCB40G CXB3590-0000000R0HCD40G CXB3590-0000000R0UBB40G CXB3590-0000000R0UBD40G CXB3590-0000000R0HCB35G CXB3590-0000000R0HCD35G CXB3590-0000000R0UBB35G CXB3590-0000000R0UBD35G CXB3590-0000000R0HBD30G CXB3590-0000000R0HCB30G CXB3590-0000000R0UBB30G CXB3590-0000000R0UBD30G CXB3590-0000000R0HBD27G CXB3590-0000000R0HCB27G CXB3590-0000000R0UAD27G CXB3590-0000000R0UBB27G
Notes • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. See the Measurements section (page 18). • Cree XLamp CXB3590 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * For 80 CRI minimum LEDs, CRI R9 minimum is 0 with a ±2 tolerance. For 90 CRI minimum LEDs, CRI R9 typical is 60. ** Flux values @ 25 °C are calculated and for reference only.
Copyright © 2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
7
XLamp ® CXB3590 LED
Relative Spectral Power Distribution
Relative Spectral Power Distribution
The following graph is the result of a series of pulsed measurements at 2400 mA for the 36-V CXB3590 and 1200 mA for the 72‑V CXB3590 and TJ = 85 °C. 100%
Relative Spectral Power
90% 80% 70% 60%
5000 K, 70 CRI
50%
4000 K, 70 CRI
40%
3000 K, 80 CRI
30%
3000 K, 90 CRI
20% 10% 0%
380
430
480
530
580
630
680
730
780
Wavelength (nm)
Copyright © 2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
8
XLamp ® CXB3590 LED
Electrical Characteristics The following graph is the result of a series of steady-state measurements. 38.5 38.0
36 V
37.5
Voltage (V)
37.0
Tc = 25 °C
36.5
Tc = 55 °C
36.0
Tc = 85 °C
35.5
Tc = 105 °C
35.0 34.5 34.0 33.5 1400
1600
1800
2000
2200
2400
2600
2800
3000
3200
3400
3600
Current (mA)
77 76
72 V
75
Voltage (V)
74
Tc = 25 °C
73
Tc = 55 °C
72
Tc = 85 °C
71
Tc = 105 °C
70 69 68 67
700
800
900
1000
1100
1200
1300
1400
1500
1600
1700
1800
Current (mA)
Copyright © 2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
9
XLamp ® CXB3590 LED
Relative Luminous Flux The relative luminous flux values provided below are the ratio of: • Measurements of CXB3590 at steady-state operation at the given conditions, divided by • Flux measured during binning, which is a pulsed measurement at 2400 mA at TJ = 85 °C for the 36‑V CXB3590. Using the 36-V CXB3590 LED as an example, at steady-state operation of Tc = 25 °C, IF = 2800 mA, the relative luminous flux ratio is 120% in the chart below. A CXB3590 LED that measures 11,000 lm during binning will deliver 13,200 lm (11,000 * 1.2) at steady-state operation of Tc = 25 °C, IF = 2800 mA. 150%
36 V
Relative Luminous Flux
120%
Tc = 25 °C
90%
Tc = 55 °C Tc = 85 °C
60%
Tc = 105 °C
30%
0% 1400
1600
1800
2000
2200
2400
2600
2800
3000
3200
3400
3600
Current (mA)
Copyright © 2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
10
XLamp ® CXB3590 LED
Relative Luminous Flux - Continued The relative luminous flux values provided below are the ratio of: • Measurements of CXB3590 at steady-state operation at the given conditions, divided by • Flux measured during binning, which is a pulsed measurement at 1200 mA at TJ = 85 °C for the 72‑V CXB3590. Using the 72-V CXB3590 LED as an example, at steady-state operation of Tc = 25 °C, IF = 1400 mA, the relative luminous flux ratio is 120% in the chart below. A CXB3590 LED that measures 11,000 lm during binning will deliver 13,200 lm (11,000 * 1.2) at steady-state operation of Tc = 25 °C, IF = 1400 mA.
Relative Luminous Flux
150%
72 V
120%
Tc = 25 °C
90%
Tc = 55 °C Tc = 85 °C
60%
Tc = 105 °C
30%
0%
700
800
900
1000
1100
1200
1300
1400
1500
1600
1700
1800
Current (mA)
Copyright © 2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
11
XLamp ® CXB3590 LED
Far Field
Typical Spatial Distribution 100%
Relative Luminous Intensity
80%
60%
40%
20%
-90
-70
-50
-30
-10
0%
10
30
50
70
90
Angle (º)
Performance Groups - Brightness (36 V, If = 2400 mA; 72 V, If = 1200 mA, Tj = 85 °C) XLamp CXB3590 LEDs are tested for luminous flux and placed into one of the following bins. Group Code
Minimum Luminous Flux
Maximum Luminous Flux
AD
9,000
9,500
BB
9,500
10,000
BD
10,000
11,000
CB
11,000
12,000
CD
12,000
13,000
DB
13,000
14,000
DD
14,000
15,000
Copyright © 2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
12
XLamp ® CXB3590 LED
Performance Groups - Chromaticity (Tj = 85 °C) XLamp CXB3590 LEDs are tested for chromaticity and placed into one of the regions defined by the following bounding coordinates. EasyWhite Color Temperatures – 2-Step Code
40H
35H
30H
27H
CCT
4000 K
3500 K
3000 K
2700 K
x
y
0.3777
0.3739
0.3797
0.3816
0.3861
0.3855
0.3838
0.3777
0.4022
0.3858
0.4053
0.3942
0.4125
0.3977
0.4091
0.3891
0.4287
0.3975
0.4328
0.4064
0.4390
0.4086
0.4347
0.3996
0.4524
0.4048
0.4574
0.4140
0.4633
0.4154
0.4581
0.4062
EasyWhite Color Temperatures – 3-Step Ellipse Center Point
Major Axis
Minor Axis
x
y
a
b
Rotation Angle (°)
6500 K
0.3123
0.3282
0.00666
0.00330
61.0
5700 K
0.3287
0.3417
0.00738
0.00360
72.0
50G
5000 K
0.3447
0.3553
0.00840
0.00312
65.0
40G
4000 K
0.3818
0.3797
0.00939
0.00402
53.7
35G
3500 K
0.4073
0.3917
0.00927
0.00414
54.0
30G
3000 K
0.4338
0.4030
0.00834
0.00408
53.2
27G
2700 K
0.4577
0.4099
0.00834
0.00420
48.5
Major Axis
Minor Axis
y
a
b
Rotation Angle (°)
Bin Code
CCT
65G 57G
EasyWhite Color Temperatures – 5-Step Ellipse Bin Code
CCT
Center Point x
65E
6500 K
0.3123
0.3282
0.01110
0.00550
61.0
57E
5700 K
0.3287
0.3417
0.01230
0.00600
72.0
50E
5000 K
0.3447
0.3553
0.01400
0.00520
65.0
40E
4000 K
0.3818
0.3797
0.01565
0.00670
53.7
Copyright © 2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
13
XLamp ® CXB3590 LED
Cree EasyWhite® Bins Plotted on the 1931 CIE Curve 0.44
2700 K
ANSI C78.377 Quadrangle 0.43
3000 K
EasyWhite 5-step EasyWhite 3-step
0.42
3500 K
EasyWhite 2-step
0.41
4000 K 0.40
4500 K
CCy
0.39
5000 K
0.38
0.37
5700 K
0.36
6500 K
0.35
0.34 0.33 0.32
0.48
0.47
0.46
0.45
0.44
0.43
0.42
0.41
0.40
0.39
0.38
0.37
0.36
0.35
0.34
0.33
0.32
0.31
0.30
0.29
0.31
CCx
Copyright © 2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
14
XLamp ® CXB3590 LED
Bin and Order Code Formats Bin codes and order codes are configured as follows: Order Code Bin Code
Series = CXA35
Series = CXA35
Internal code
Chromaticity bin
CRI Specification 0 = Standard CRI H = 80 min CRI U = 90 min CRI Y = 93 min CRI
Vf class N0 = 36-V class R0 = 72-V class Internal code
SSSSSCC-HHHH-HHHGGRNNNNN
SSSSSCC-WWW-FF-GGR-AAAAA Kit code 6
Vf class N0 = 36-V class R0 = 72-V class
5
CRI Specification 3 B = 70 min CRI H = 80 min CRI U = 90 min CRI Y = 93 min CRI
4
NOTICE CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION CONTAINED WITHIN ARE THE PROPRIETARY AND CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT OF CREE INC.
Performance class
D
REV
Flux bin Performance class
Mechanical Dimensions Dimensions are in mm.
34.85 ±0.2
Tolerances unless otherwise specified: ±.13
15.764 4.0
C
Tc 1.300
12.16
1.15 ± 0.15
x° ±1° 4.0
15.902
14.25
34.85 ±0.2
B
30.00 ±0.2 15.902 32.00 ±0.2 4.0
4.0
0.55 ± 0.1
15.764 A
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN INCHES Copyright © 2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks ofAFTER Cree, Inc. AND FINISH. TOLERANCE UNLESS SPECIFIED: UL® and the UR logo are registered trademarks of UL LLC. .XX ± .01 TOLERANCE UNLESS OTHERWISE SPECIFIED: .XXX ± .005 DIMENSIONS ARE IN MM X° ± .5 ° THIRD ANGLE PROJECTION 15 .X ± .10 FOR SHEET METAL PARTS ONLY .X ± .06 .XX ± .03 .XX ± .03 .XXX ± .010 .XXX ± .010
DRAWN BY
D. CRONIN CHECK
APPROVED
MATERIAL
FINAL PROTECTIVE FIN
XLamp ® CXB3590 LED
Thermal Design The CXB family of LED arrays can include over a hundred different LED die inside one package, and thus over a hundred different junction temperatures (TJ). Cree has intentionally removed junction-temperature-based operating limits and replaced the commonplace maximum TJ calculations with maximum ratings based on forward current (IF) and case temperature (Tc). No additional calculations are required to ensure the CXB LED is being operated within its designed limits. Please refer to page 22 for the Operating Limit specification. There is no need to calculate for TJ inside the package, as the thermal management design process, specifically from solder point (TSP) to ambient (Ta), remains identical to any other LED component. For more information on thermal management of Cree XLamp LEDs, please refer to the Thermal Management application note. For CXB soldering recommendations and more information on thermal interface materials (TIM) and connection methods, please refer to the Cree XLamp CX Family LEDs soldering and handling document. The CX Family LED Design Guide provides basic information on the requirements to use Cree XLamp CXB LEDs successfully in luminaire designs. To keep the CXB3590 LED at or below the maximum rated Tc, the case to ambient temperature thermal resistance (R_c-a) must be at or below the maximum R_c-a value shown on the following graph, depending on the operating environment. The y‑axis in each graph is a base 10 logarithmic scale. As the figure at right shows, the R_c-a value is the sum of the thermal resistance of the TIM (R_tim)
R_j-c
R_j-c
Tc
Tc
R_tim R_c-a
plus the thermal resistance of the heat sink (R_hs).
R_hs Ta
Ta
Maximum R_c-a
100.00
36 V
10.00
Ta = 25 °C Ta = 55 °C
1.00
Ta = 85 °C Ta = 105 °C
0.10
0.01
400
800
1200
1600
2000
2400
2800
3200
3600
Current (mA)
Copyright © 2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
16
XLamp ® CXB3590 LED
CXA3590 Thermal Design - Continued
Maximum R_c-a
100.00
72 V
10.00
Ta = 25 °C Ta = 55 °C
1.00
Ta = 85 °C Ta = 105 °C
0.10
0.01
200
400
600
800
1000
1200
1400
1600
1800
Current (mA)
Copyright © 2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
17
XLamp ® CXB3590 LED
Notes Measurements The luminous flux, radiant power, chromaticity and CRI measurements in this document are binning specifications only and solely represent product measurements as of the date of shipment. These measurements will change over time based on a number of factors that are not within Cree’s control and are not intended or provided as operational specifications for the products. Calculated values are provided for informational purposes only and are not intended as specifications.
Pre‑Release Qualification Testing Please read the LED Reliability Overview for details of the qualification process Cree applies to ensure long-term reliability for XLamp LEDs and details of Cree’s pre-release qualification testing for XLamp LEDs.
Lumen Maintenance Cree now uses standardized IES LM-80-08 and TM-21-11 methods for collecting long-term data and extrapolating LED lumen maintenance. For information on the specific LM-80 data sets available for this LED, refer to the public LM-80 results document. Please read the Long-Term Lumen Maintenance application note for more details on Cree’s lumen maintenance testing and forecasting. Please read the Thermal Management application note for details on how thermal design, ambient temperature, and drive current affect the LED junction temperature.
RoHS Compliance The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree representative or from the Product Documentation sections of www.cree.com.
REACh Compliance REACh substances of very high concern (SVHCs) information is available for this product. Since the European Chemical Agency (ECHA) has published notice of their intent to frequently revise the SVHC listing for the foreseeable future, please contact a Cree representative to insure you get the most up-to-date REACh Declaration. REACh banned substance information (REACh Article 67) is also available upon request.
UL® Recognized Component Level 4 enclosure consideration. The LED package or a portion thereof has been investigated as a fire and electrical enclosure per ANSI/ UL 8750.
Vision Advisory WARNING: Do not look at an exposed lamp in operation. Eye injury can result. For more information about LEDs and eye safety, please refer to the LED Eye Safety application note.
Copyright © 2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
18
XLamp ® CXB3590 LED
Packaging Cree CXB3590 LEDs are packaged in trays of 10. Five trays are sealed in an anti-static bag and placed inside a carton, for a total of 50 LEDs per carton. Each carton contains 50 LEDs from the same performance bin.
6
5
4
3
Dimensions are in inches.
2
1
REVISONS
TICE HIS PLOT AND THE INFORMATION E THE PROPRIETARY AND ATION OF CREE, INC. THIS PLOT EPRODUCED OR DISCLOSED TO ANY ON WITHOUTTHE WRITTEN CONSENT
7.500
5
Tolerances: ±.13 DESCRIPTION
REV
7.500 R .375
4
BY
DATE
APP'D
x° ±1° 3
2
R.375
1
NSENT
1.59 1.59
5.875 R .375 8.125 8.125
.875
LABEL WITH CREE BIN CODE, QUANTITY, LOT # LABEL WITH CREE BIN CODE, QTY, LOT #
0.38
1.59 1.59
LABEL ABELPATENT IS LOCATED TED ONOF UNDERSIDE ERSIDE COVER OF COVER
BAG
PATENT LABEL IS LOCATED ON UNDERSIDE OF CARTON
ITH CREE BIN ANTITY, LOT #
.875
BAG
BAG
.38
EL IS LOCATED IDE OF COVER
LABEL WITH CREE BIN CODE, QUANTITY, LOT # LABEL WITH CREE BIN CODE, QTY, LOT #
LABEL WITH CREE BIN UNLESS OTHERWISE SPECIFIED CODE, QUANTITY, LOT #
LABEL WITH CREE BIN CODE, QUANTITY, LOT #
TH CREE BIN ANTITY, LOT #
THIRD ANGLE PROJECTION
LABEL WITH CREE BIN CODE, QTY, LOT #
DIMENSIONS ARE IN INCHES AND AFTER FINISH. TOLERANCE UNLESS SPECIFIED: .XX ± .01 .XXX ± .005 X° ± .5 ° FOR SHEET METAL PARTS ONLY .X ± .06 .XX ± .03 .XXX ± .010 X° ± .5 ° SURFACE FINISH:
6
5
4
D. CRONIN
APPROVED
DATE
THIRD ANGLE PROJECTION
Phone (919) 313-5300 Fax (919) 313-5558 TITLE
LE3501 MARKETING SPEC
MATERIAL
SIZE FINAL PROTECTIVE FINISH SCALE
63
C
DRAWING NO.
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN CHECK MILLIMETERS & BEFORE FINISH. notice. TOLERANCE Cree®, the CreeSPECIFIED: logo, XLamp® and UNLESS .X ± .XX ± .XXX ± X° ±
0.1 .05 .005 1 °
FOR SHEET METAL PARTS ONLY .X ± .06
A
SHEET
3.000
OF
DATE
4600 Silicon Drive Durham, N.C 27703
DATE
®
Phone (919) 361-4770 Fax (919) 313-5303
DATE TITLE
CXA15XX_DATASHEET 19
MATERIAL
SIZE FINAL PROTECTIVE FINISH
2
1
EasyWhite are registered trademarks of Cree, Inc.
APPROVED
REV.
LE3501
2
DRAWN BY
Copyright © 2015 Cree, Inc. All rights reserved. The information in this document is subject to change without UL® and the UR logo are registered trademarks of UL LLC.
4600 Silicon Drive Durham, N.C 27703
7/30/13 DATE
3
L WITH CREE BIN QUANTITY, LOT #
DATE
DRAWN BY
CHECK
DRAWING NO.
CXA15XX_DATASHEET_BAG2013
CLD-DS126 Rev 0F
Product family data sheet
Product Description
features
Table of Contents
The XLamp® CXB3590 LED Array is
• 30‑mm optical source
Characteristics................................................2
the brightest member of the second
• Mechanical and optical design
Operating Limits..............................................3
generation of the CXA family that
consistent with CXA35 LED
delivers up to 30% higher efficacy and up to 20% higher lumens than the first generation in the same LES. The higher performance second generation CXA LED Arrays provide a drop-in performance
upgrade
to
existing
• Available in 70-, 80- and 90-minimum CRI options • Cree EasyWhite 2-, 3‑ and 5-step ®
binning • Forward voltage options: 36‑V class & 72‑V class
Flux Characteristics, EasyWhite® Order Codes and Bins - 36 V.....................................4 Flux Characteristics, EasyWhite® Order Codes and Bins - 72 V.....................................6 Relative Spectral Power Distribution.............8 Electrical Characteristics................................9 Relative Luminous Flux.................................10
CXA LED designs to shorten product
• 85 °C binning and characterization
Typical Spatial Distribution...........................12
development time. Available in 2‑step,
• Extremely uniform color over
Performance Groups - Brightness...............12
3‑step and 5‑step EasyWhite
®
bins,
viewing angle
Performance Groups - Chromaticity............13
the CXB3590 LED delivers high lumen
• Top-side solder connections
Cree EasyWhite® Bins Plotted on the
output and high efficacy in a single,
• Thermocouple attach point
1931 CIE Curve..............................................14
easy-to-use package that eliminates the
• NEMA SSL-3 2011 standard flux
Bin and Order Code Formats........................15
need for reflow soldering. The CX Family LED Design Guide provides basic information on the
bins
Mechanical Dimensions...............................15
• RoHS- and REACh‑compliant
Thermal Design.............................................16
• UL® recognized component
Notes.............................................................18
(E349212)
Packaging......................................................19
requirements to use the CXB3590 LED
www.cree.com/Xlamp
successfully in luminaire designs.
Copyright © 2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 1
XLamp ® CXB3590 LED
Characteristics Characteristics Viewing angle (FWHM) ESD withstand voltage (HBM per Mil-Std-883D)
Unit degrees
Minimum
Typical
Maximum
115
V
8000
DC forward current (36 V)
mA
3600*
DC forward current (72 V)
mA
1800*
Reverse current (36 V, 72 V )
mA
0.1
Forward voltage (36 V, @ 2400 mA, Tj = 85 °C)
V
36
39
Forward voltage (72 V, @ 1200 mA, Tj = 85 °C)
V
72
78
*
Refer to the Operating Limits section.
Copyright © 2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
2
XLamp ® CXB3590 LED
Operating Limits The maximum current rating of the CXB3590 is dependent on the case temperature (Tc) when the LED has reached thermal equilibrium under steady-state operation. The graphs shown below assume that the system design employs good thermal management (thermal interface material and heat sink) and may vary when poor thermal management is employed. Please refer to the Mechanical Dimensions section on page 15 for the location of the Tc measurement point. 4000 3600 3200 2800
If (mA)
2400
36 V
2000 1600
1200 800 400 0
0
25
50
75
100
125
150
Case Temperature (°C)
CXB3590 2000 1800 1600 1400
If (mA)
1200
72 V
1000 800
600 400 200 0
0
25
50
75
100
125
150
Case Temperature (°C)
Copyright © 2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
3
XLamp ® CXB3590 LED
Flux Characteristics, EasyWhite® Order Codes and Bins - 36 V (If = 2400 mA, TJ = 85 °C) The following table provides order codes for XLamp CXB3590 LEDs. For a complete description of the order code nomenclature, please see the Bin and Order Code Formats section (page 15).
Nominal CCT
CRI* Min
70
Minimum Luminous Flux Typ
Group
Flux (lm) Flux (lm) @ 85 °C @ 25 °C**
CD
12,000
13,237
DB
13,000
14,340
CB
11,000
12,134
2-Step Group
Order Code
3-Step Group
Order Code
---
5-Step Group
65E
6500 K 80
70
5700 K
80
90
70
5000 K
80
90
---
65E
Order Code CXB3590-0000000N0BCD65E CXB3590-0000000N0BDB65E CXB3590-0000000N0HCB65E
CD
12,000
13,237
CXB3590-0000000N0HCD65E
CD
12,000
13,237
CXB3590-0000000N0BCD57E
DB
13,000
14,340
CXB3590-0000000N0BDB57E
CB
11,000
12,134
CXB3590-0000000N0HCB57E
CD
12,000
13,237
BD
10,000
11,031
---
57E
---
57E
92
57G CB
11,000
12,134
CD
12,000
13,237
DB
13,000
14,340
CB
11,000
12,134
CXB3590-0000000N0UBD57G CXB3590-0000000N0UCB57G
---
50E
---
50G
CXB3590-0000000N0HCB50G
CD
12,000
13,237
CXB3590-0000000N0HCD50G
BD
10,000
11,031
CXB3590-0000000N0UBD50G
CB
11,000
12,134
92
50G
CXB3590-0000000N0HCD57E
50E
CXB3590-0000000N0BCD50E CXB3590-0000000N0BDB50E CXB3590-0000000N0HCB50E CXB3590-0000000N0HCD50E
CXB3590-0000000N0UCB50G
Notes • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. See the Measurements section (page 18). • Cree XLamp CXB3590 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * For 80 CRI minimum LEDs, CRI R9 minimum is 0 with a ±2 tolerance. For 90 CRI minimum LEDs, CRI R9 typical is 60. ** Flux values @ 25 °C are calculated and for reference only.
Copyright © 2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
4
XLamp ® CXB3590 LED
Flux Characteristics, EasyWhite® Order Codes and Bins - 36 V (If = 2400 mA, TJ = 85 °C) - Continued Nominal CCT
CRI*
Minimum Luminous Flux
Min
Typ
70
---
Group CD
4000 K
80
90
80
Flux (lm) Flux (lm) @ 85 °C @ 25 °C** 12,000
2-Step Group
80
80
DB
13,000
14,340
CB
11,000
12,134
CD
12,000
13,237
CXB3590-0000000N0HCD40H
BB
9,500
10,479
CXB3590-0000000N0UBB40H
BD
10,000
11,031
CB
11,000
12,134
---
40H
92
40H
---
35H
CXB3590-0000000N0HCB40H
CXB3590-0000000N0UBD40H CXB3590-0000000N0HCB35H
CD
12,000
13,237
CXB3590-0000000N0HCD35H
BB
9,500
10,479
CXB3590-0000000N0UBB35H
BD
10,000
11,031
BD
10,000
11,031
92
35H
---
30H
CXB3590-0000000N0UBD35H CXB3590-0000000N0HBD30H
CB
11,000
12,134
CXB3590-0000000N0HCB30H
BB
9,500
10,479
CXB3590-0000000N0UBB30H
BD
10,000
11,031
CXB3590-0000000N0UBD30H
BD
10,000
11,031
CXB3590-0000000N0HBD27H
CB
11,000
12,134
AD
9,000
9,928
92
30H
---
27H
2700 K 90
Order Code
Group
40E
3000 K 90
Group
5-Step
13,237
3500 K 90
Order Code
3-Step
92
27H BB
9,500
10,479
CXB3590-0000000N0HCB27H CXB3590-0000000N0UAD27H CXB3590-0000000N0UBB27H
40G
40G
35G
35G
30G
30G
27G
27G
Order Code CXB3590-0000000N0BCD40E CXB3590-0000000N0BDB40E
CXB3590-0000000N0HCB40G CXB3590-0000000N0HCD40G CXB3590-0000000N0UBB40G CXB3590-0000000N0UBD40G CXB3590-0000000N0HCB35G CXB3590-0000000N0HCD35G CXB3590-0000000N0UBB35G CXB3590-0000000N0UBD35G CXB3590-0000000N0HBD30G CXB3590-0000000N0HCB30G CXB3590-0000000N0UBB30G CXB3590-0000000N0UBD30G CXB3590-0000000N0HBD27G CXB3590-0000000N0HCB27G CXB3590-0000000N0UAD27G CXB3590-0000000N0UBB27G
Notes • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. See the Measurements section (page 18). • Cree XLamp CXB3590 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * For 80 CRI minimum LEDs, CRI R9 minimum is 0 with a ±2 tolerance. For 90 CRI minimum LEDs, CRI R9 typical is 60. ** Flux values @ 25 °C are calculated and for reference only.
Copyright © 2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
5
XLamp ® CXB3590 LED
Flux Characteristics, EasyWhite® Order Codes and Bins - 72 V (If = 1200 mA, TJ = 85 °C) The following table provides order codes for XLamp CXB3590 LEDs. For a complete description of the order code nomenclature, please see the Bin and Order Code Formats section (page 15).
Nominal CCT
CRI* Min
70
Minimum Luminous Flux Typ
Group
Flux (lm) Flux (lm) @ 85 °C @ 25 °C**
CD
12,000
13,237
DB
13,000
14,340
CB
11,000
12,134
2-Step Group
Order Code
3-Step Group
Order Code
---
5-Step Group
65E
6500 K 80
70
5700 K
80
90
70
5000 K
80
90
---
65E
Order Code CXB3590-0000000R0BCD65E CXB3590-0000000R0BDB65E CXB3590-0000000R0HCB65E
CD
12,000
13,237
CXB3590-0000000R0HCD65E
CD
12,000
13,237
CXB3590-0000000R0BCD57E
DB
13,000
14,340
CXB3590-0000000R0BDB57E
CB
11,000
12,134
CXB3590-0000000R0HCB57E
CD
12,000
13,237
BD
10,000
11,031
---
57E
---
57E
92
57G CB
11,000
12,134
CD
12,000
13,237
DB
13,000
14,340
CB
11,000
12,134
CXB3590-0000000R0UBD57G CXB3590-0000000R0UCB57G
---
50E
---
50G
CXB3590-0000000R0HCB50G
CD
12,000
13,237
CXB3590-0000000R0HCD50G
BD
10,000
11,031
CXB3590-0000000R0UBD50G
CB
11,000
12,134
92
50G
CXB3590-0000000R0HCD57E
50E
CXB3590-0000000R0BCD50E CXB3590-0000000R0BDB50E CXB3590-0000000R0HCB50E CXB3590-0000000R0HCD50E
CXB3590-0000000R0UCB50G
Notes • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. See the Measurements section (page 18). • Cree XLamp CXB3590 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * For 80 CRI minimum LEDs, CRI R9 minimum is 0 with a ±2 tolerance. For 90 CRI minimum LEDs, CRI R9 typical is 60. ** Flux values @ 25 °C are calculated and for reference only.
Copyright © 2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
6
XLamp ® CXB3590 LED
Flux Characteristics, EasyWhite® Order Codes and Bins - 72 V (If = 1200 mA, TJ = 85 °C) - Continued Nominal CCT
CRI*
Minimum Luminous Flux
Min
Typ
70
---
Group CD
4000 K
80
90
80
Flux (lm) Flux (lm) @ 85 °C @ 25 °C** 12,000
2-Step Group
80
80
DB
13,000
14,340
CB
11,000
12,134
CD
12,000
13,237
CXB3590-0000000R0HCD40H
BB
9,500
10,479
CXB3590-0000000R0UBB40H
BD
10,000
11,031
CB
11,000
12,134
---
40H
92
40H
---
35H
CXB3590-0000000R0HCB40H
CXB3590-0000000R0UBD40H CXB3590-0000000R0HCB35H
CD
12,000
13,237
CXB3590-0000000R0HCD35H
BB
9,500
10,479
CXB3590-0000000R0UBB35H
BD
10,000
11,031
BD
10,000
11,031
92
35H
---
30H
CXB3590-0000000R0UBD35H CXB3590-0000000R0HBD30H
CB
11,000
12,134
CXB3590-0000000R0HCB30H
BB
9,500
10,479
CXB3590-0000000R0UBB30H
BD
10,000
11,031
CXB3590-0000000R0UBD30H
BD
10,000
11,031
CXB3590-0000000R0HBD27H
CB
11,000
12,134
AD
9,000
9,928
92
30H
---
27H
2700 K 90
Order Code
Group
40E
3000 K 90
Group
5-Step
13,237
3500 K 90
Order Code
3-Step
92
27H BB
9,500
10,479
CXB3590-0000000R0HCB27H CXB3590-0000000R0UAD27H CXB3590-0000000R0UBB27H
40G
40G
35G
35G
30G
30G
27G
27G
Order Code CXB3590-0000000R0BCD40E CXB3590-0000000R0BDB40E
CXB3590-0000000R0HCB40G CXB3590-0000000R0HCD40G CXB3590-0000000R0UBB40G CXB3590-0000000R0UBD40G CXB3590-0000000R0HCB35G CXB3590-0000000R0HCD35G CXB3590-0000000R0UBB35G CXB3590-0000000R0UBD35G CXB3590-0000000R0HBD30G CXB3590-0000000R0HCB30G CXB3590-0000000R0UBB30G CXB3590-0000000R0UBD30G CXB3590-0000000R0HBD27G CXB3590-0000000R0HCB27G CXB3590-0000000R0UAD27G CXB3590-0000000R0UBB27G
Notes • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. See the Measurements section (page 18). • Cree XLamp CXB3590 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * For 80 CRI minimum LEDs, CRI R9 minimum is 0 with a ±2 tolerance. For 90 CRI minimum LEDs, CRI R9 typical is 60. ** Flux values @ 25 °C are calculated and for reference only.
Copyright © 2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
7
XLamp ® CXB3590 LED
Relative Spectral Power Distribution
Relative Spectral Power Distribution
The following graph is the result of a series of pulsed measurements at 2400 mA for the 36-V CXB3590 and 1200 mA for the 72‑V CXB3590 and TJ = 85 °C. 100%
Relative Spectral Power
90% 80% 70% 60%
5000 K, 70 CRI
50%
4000 K, 70 CRI
40%
3000 K, 80 CRI
30%
3000 K, 90 CRI
20% 10% 0%
380
430
480
530
580
630
680
730
780
Wavelength (nm)
Copyright © 2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
8
XLamp ® CXB3590 LED
Electrical Characteristics The following graph is the result of a series of steady-state measurements. 38.5 38.0
36 V
37.5
Voltage (V)
37.0
Tc = 25 °C
36.5
Tc = 55 °C
36.0
Tc = 85 °C
35.5
Tc = 105 °C
35.0 34.5 34.0 33.5 1400
1600
1800
2000
2200
2400
2600
2800
3000
3200
3400
3600
Current (mA)
77 76
72 V
75
Voltage (V)
74
Tc = 25 °C
73
Tc = 55 °C
72
Tc = 85 °C
71
Tc = 105 °C
70 69 68 67
700
800
900
1000
1100
1200
1300
1400
1500
1600
1700
1800
Current (mA)
Copyright © 2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
9
XLamp ® CXB3590 LED
Relative Luminous Flux The relative luminous flux values provided below are the ratio of: • Measurements of CXB3590 at steady-state operation at the given conditions, divided by • Flux measured during binning, which is a pulsed measurement at 2400 mA at TJ = 85 °C for the 36‑V CXB3590. Using the 36-V CXB3590 LED as an example, at steady-state operation of Tc = 25 °C, IF = 2800 mA, the relative luminous flux ratio is 120% in the chart below. A CXB3590 LED that measures 11,000 lm during binning will deliver 13,200 lm (11,000 * 1.2) at steady-state operation of Tc = 25 °C, IF = 2800 mA. 150%
36 V
Relative Luminous Flux
120%
Tc = 25 °C
90%
Tc = 55 °C Tc = 85 °C
60%
Tc = 105 °C
30%
0% 1400
1600
1800
2000
2200
2400
2600
2800
3000
3200
3400
3600
Current (mA)
Copyright © 2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
10
XLamp ® CXB3590 LED
Relative Luminous Flux - Continued The relative luminous flux values provided below are the ratio of: • Measurements of CXB3590 at steady-state operation at the given conditions, divided by • Flux measured during binning, which is a pulsed measurement at 1200 mA at TJ = 85 °C for the 72‑V CXB3590. Using the 72-V CXB3590 LED as an example, at steady-state operation of Tc = 25 °C, IF = 1400 mA, the relative luminous flux ratio is 120% in the chart below. A CXB3590 LED that measures 11,000 lm during binning will deliver 13,200 lm (11,000 * 1.2) at steady-state operation of Tc = 25 °C, IF = 1400 mA.
Relative Luminous Flux
150%
72 V
120%
Tc = 25 °C
90%
Tc = 55 °C Tc = 85 °C
60%
Tc = 105 °C
30%
0%
700
800
900
1000
1100
1200
1300
1400
1500
1600
1700
1800
Current (mA)
Copyright © 2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
11
XLamp ® CXB3590 LED
Far Field
Typical Spatial Distribution 100%
Relative Luminous Intensity
80%
60%
40%
20%
-90
-70
-50
-30
-10
0%
10
30
50
70
90
Angle (º)
Performance Groups - Brightness (36 V, If = 2400 mA; 72 V, If = 1200 mA, Tj = 85 °C) XLamp CXB3590 LEDs are tested for luminous flux and placed into one of the following bins. Group Code
Minimum Luminous Flux
Maximum Luminous Flux
AD
9,000
9,500
BB
9,500
10,000
BD
10,000
11,000
CB
11,000
12,000
CD
12,000
13,000
DB
13,000
14,000
DD
14,000
15,000
Copyright © 2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
12
XLamp ® CXB3590 LED
Performance Groups - Chromaticity (Tj = 85 °C) XLamp CXB3590 LEDs are tested for chromaticity and placed into one of the regions defined by the following bounding coordinates. EasyWhite Color Temperatures – 2-Step Code
40H
35H
30H
27H
CCT
4000 K
3500 K
3000 K
2700 K
x
y
0.3777
0.3739
0.3797
0.3816
0.3861
0.3855
0.3838
0.3777
0.4022
0.3858
0.4053
0.3942
0.4125
0.3977
0.4091
0.3891
0.4287
0.3975
0.4328
0.4064
0.4390
0.4086
0.4347
0.3996
0.4524
0.4048
0.4574
0.4140
0.4633
0.4154
0.4581
0.4062
EasyWhite Color Temperatures – 3-Step Ellipse Center Point
Major Axis
Minor Axis
x
y
a
b
Rotation Angle (°)
6500 K
0.3123
0.3282
0.00666
0.00330
61.0
5700 K
0.3287
0.3417
0.00738
0.00360
72.0
50G
5000 K
0.3447
0.3553
0.00840
0.00312
65.0
40G
4000 K
0.3818
0.3797
0.00939
0.00402
53.7
35G
3500 K
0.4073
0.3917
0.00927
0.00414
54.0
30G
3000 K
0.4338
0.4030
0.00834
0.00408
53.2
27G
2700 K
0.4577
0.4099
0.00834
0.00420
48.5
Major Axis
Minor Axis
y
a
b
Rotation Angle (°)
Bin Code
CCT
65G 57G
EasyWhite Color Temperatures – 5-Step Ellipse Bin Code
CCT
Center Point x
65E
6500 K
0.3123
0.3282
0.01110
0.00550
61.0
57E
5700 K
0.3287
0.3417
0.01230
0.00600
72.0
50E
5000 K
0.3447
0.3553
0.01400
0.00520
65.0
40E
4000 K
0.3818
0.3797
0.01565
0.00670
53.7
Copyright © 2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
13
XLamp ® CXB3590 LED
Cree EasyWhite® Bins Plotted on the 1931 CIE Curve 0.44
2700 K
ANSI C78.377 Quadrangle 0.43
3000 K
EasyWhite 5-step EasyWhite 3-step
0.42
3500 K
EasyWhite 2-step
0.41
4000 K 0.40
4500 K
CCy
0.39
5000 K
0.38
0.37
5700 K
0.36
6500 K
0.35
0.34 0.33 0.32
0.48
0.47
0.46
0.45
0.44
0.43
0.42
0.41
0.40
0.39
0.38
0.37
0.36
0.35
0.34
0.33
0.32
0.31
0.30
0.29
0.31
CCx
Copyright © 2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
14
XLamp ® CXB3590 LED
Bin and Order Code Formats Bin codes and order codes are configured as follows: Order Code Bin Code
Series = CXA35
Series = CXA35
Internal code
Chromaticity bin
CRI Specification 0 = Standard CRI H = 80 min CRI U = 90 min CRI Y = 93 min CRI
Vf class N0 = 36-V class R0 = 72-V class Internal code
SSSSSCC-HHHH-HHHGGRNNNNN
SSSSSCC-WWW-FF-GGR-AAAAA Kit code 6
Vf class N0 = 36-V class R0 = 72-V class
5
CRI Specification 3 B = 70 min CRI H = 80 min CRI U = 90 min CRI Y = 93 min CRI
4
NOTICE CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION CONTAINED WITHIN ARE THE PROPRIETARY AND CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT OF CREE INC.
Performance class
D
REV
Flux bin Performance class
Mechanical Dimensions Dimensions are in mm.
34.85 ±0.2
Tolerances unless otherwise specified: ±.13
15.764 4.0
C
Tc 1.300
12.16
1.15 ± 0.15
x° ±1° 4.0
15.902
14.25
34.85 ±0.2
B
30.00 ±0.2 15.902 32.00 ±0.2 4.0
4.0
0.55 ± 0.1
15.764 A
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN INCHES Copyright © 2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks ofAFTER Cree, Inc. AND FINISH. TOLERANCE UNLESS SPECIFIED: UL® and the UR logo are registered trademarks of UL LLC. .XX ± .01 TOLERANCE UNLESS OTHERWISE SPECIFIED: .XXX ± .005 DIMENSIONS ARE IN MM X° ± .5 ° THIRD ANGLE PROJECTION 15 .X ± .10 FOR SHEET METAL PARTS ONLY .X ± .06 .XX ± .03 .XX ± .03 .XXX ± .010 .XXX ± .010
DRAWN BY
D. CRONIN CHECK
APPROVED
MATERIAL
FINAL PROTECTIVE FIN
XLamp ® CXB3590 LED
Thermal Design The CXB family of LED arrays can include over a hundred different LED die inside one package, and thus over a hundred different junction temperatures (TJ). Cree has intentionally removed junction-temperature-based operating limits and replaced the commonplace maximum TJ calculations with maximum ratings based on forward current (IF) and case temperature (Tc). No additional calculations are required to ensure the CXB LED is being operated within its designed limits. Please refer to page 22 for the Operating Limit specification. There is no need to calculate for TJ inside the package, as the thermal management design process, specifically from solder point (TSP) to ambient (Ta), remains identical to any other LED component. For more information on thermal management of Cree XLamp LEDs, please refer to the Thermal Management application note. For CXB soldering recommendations and more information on thermal interface materials (TIM) and connection methods, please refer to the Cree XLamp CX Family LEDs soldering and handling document. The CX Family LED Design Guide provides basic information on the requirements to use Cree XLamp CXB LEDs successfully in luminaire designs. To keep the CXB3590 LED at or below the maximum rated Tc, the case to ambient temperature thermal resistance (R_c-a) must be at or below the maximum R_c-a value shown on the following graph, depending on the operating environment. The y‑axis in each graph is a base 10 logarithmic scale. As the figure at right shows, the R_c-a value is the sum of the thermal resistance of the TIM (R_tim)
R_j-c
R_j-c
Tc
Tc
R_tim R_c-a
plus the thermal resistance of the heat sink (R_hs).
R_hs Ta
Ta
Maximum R_c-a
100.00
36 V
10.00
Ta = 25 °C Ta = 55 °C
1.00
Ta = 85 °C Ta = 105 °C
0.10
0.01
400
800
1200
1600
2000
2400
2800
3200
3600
Current (mA)
Copyright © 2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
16
XLamp ® CXB3590 LED
CXA3590 Thermal Design - Continued
Maximum R_c-a
100.00
72 V
10.00
Ta = 25 °C Ta = 55 °C
1.00
Ta = 85 °C Ta = 105 °C
0.10
0.01
200
400
600
800
1000
1200
1400
1600
1800
Current (mA)
Copyright © 2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
17
XLamp ® CXB3590 LED
Notes Measurements The luminous flux, radiant power, chromaticity and CRI measurements in this document are binning specifications only and solely represent product measurements as of the date of shipment. These measurements will change over time based on a number of factors that are not within Cree’s control and are not intended or provided as operational specifications for the products. Calculated values are provided for informational purposes only and are not intended as specifications.
Pre‑Release Qualification Testing Please read the LED Reliability Overview for details of the qualification process Cree applies to ensure long-term reliability for XLamp LEDs and details of Cree’s pre-release qualification testing for XLamp LEDs.
Lumen Maintenance Cree now uses standardized IES LM-80-08 and TM-21-11 methods for collecting long-term data and extrapolating LED lumen maintenance. For information on the specific LM-80 data sets available for this LED, refer to the public LM-80 results document. Please read the Long-Term Lumen Maintenance application note for more details on Cree’s lumen maintenance testing and forecasting. Please read the Thermal Management application note for details on how thermal design, ambient temperature, and drive current affect the LED junction temperature.
RoHS Compliance The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree representative or from the Product Documentation sections of www.cree.com.
REACh Compliance REACh substances of very high concern (SVHCs) information is available for this product. Since the European Chemical Agency (ECHA) has published notice of their intent to frequently revise the SVHC listing for the foreseeable future, please contact a Cree representative to insure you get the most up-to-date REACh Declaration. REACh banned substance information (REACh Article 67) is also available upon request.
UL® Recognized Component Level 4 enclosure consideration. The LED package or a portion thereof has been investigated as a fire and electrical enclosure per ANSI/ UL 8750.
Vision Advisory WARNING: Do not look at an exposed lamp in operation. Eye injury can result. For more information about LEDs and eye safety, please refer to the LED Eye Safety application note.
Copyright © 2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
18
XLamp ® CXB3590 LED
Packaging Cree CXB3590 LEDs are packaged in trays of 10. Five trays are sealed in an anti-static bag and placed inside a carton, for a total of 50 LEDs per carton. Each carton contains 50 LEDs from the same performance bin.
6
5
4
3
Dimensions are in inches.
2
1
REVISONS
TICE HIS PLOT AND THE INFORMATION E THE PROPRIETARY AND ATION OF CREE, INC. THIS PLOT EPRODUCED OR DISCLOSED TO ANY ON WITHOUTTHE WRITTEN CONSENT
7.500
5
Tolerances: ±.13 DESCRIPTION
REV
7.500 R .375
4
BY
DATE
APP'D
x° ±1° 3
2
R.375
1
NSENT
1.59 1.59
5.875 R .375 8.125 8.125
.875
LABEL WITH CREE BIN CODE, QUANTITY, LOT # LABEL WITH CREE BIN CODE, QTY, LOT #
0.38
1.59 1.59
LABEL ABELPATENT IS LOCATED TED ONOF UNDERSIDE ERSIDE COVER OF COVER
BAG
PATENT LABEL IS LOCATED ON UNDERSIDE OF CARTON
ITH CREE BIN ANTITY, LOT #
.875
BAG
BAG
.38
EL IS LOCATED IDE OF COVER
LABEL WITH CREE BIN CODE, QUANTITY, LOT # LABEL WITH CREE BIN CODE, QTY, LOT #
LABEL WITH CREE BIN UNLESS OTHERWISE SPECIFIED CODE, QUANTITY, LOT #
LABEL WITH CREE BIN CODE, QUANTITY, LOT #
TH CREE BIN ANTITY, LOT #
THIRD ANGLE PROJECTION
LABEL WITH CREE BIN CODE, QTY, LOT #
DIMENSIONS ARE IN INCHES AND AFTER FINISH. TOLERANCE UNLESS SPECIFIED: .XX ± .01 .XXX ± .005 X° ± .5 ° FOR SHEET METAL PARTS ONLY .X ± .06 .XX ± .03 .XXX ± .010 X° ± .5 ° SURFACE FINISH:
6
5
4
D. CRONIN
APPROVED
DATE
THIRD ANGLE PROJECTION
Phone (919) 313-5300 Fax (919) 313-5558 TITLE
LE3501 MARKETING SPEC
MATERIAL
SIZE FINAL PROTECTIVE FINISH SCALE
63
C
DRAWING NO.
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN CHECK MILLIMETERS & BEFORE FINISH. notice. TOLERANCE Cree®, the CreeSPECIFIED: logo, XLamp® and UNLESS .X ± .XX ± .XXX ± X° ±
0.1 .05 .005 1 °
FOR SHEET METAL PARTS ONLY .X ± .06
A
SHEET
3.000
OF
DATE
4600 Silicon Drive Durham, N.C 27703
DATE
®
Phone (919) 361-4770 Fax (919) 313-5303
DATE TITLE
CXA15XX_DATASHEET 19
MATERIAL
SIZE FINAL PROTECTIVE FINISH
2
1
EasyWhite are registered trademarks of Cree, Inc.
APPROVED
REV.
LE3501
2
DRAWN BY
Copyright © 2015 Cree, Inc. All rights reserved. The information in this document is subject to change without UL® and the UR logo are registered trademarks of UL LLC.
4600 Silicon Drive Durham, N.C 27703
7/30/13 DATE
3
L WITH CREE BIN QUANTITY, LOT #
DATE
DRAWN BY
CHECK
DRAWING NO.
CXA15XX_DATASHEET_BAG2013
