Data Hub User manual - Race Data Systems
Data Hub User manual
www.aim-sportline.com
Data Hub 2 and 4 ways User manual Release 1.02
Index Chapter 1 – Data Hub: part numbers, optional and installation .................................... 4 1.1 – Part numbers ...................................................................................................................................... 4 1.2 – Optional ............................................................................................................................................... 4 1.3 – How to install Data Hub ..................................................................................................................... 4
Chapter 2 – How to use Data Hub .................................................................................... 5 2.1 – Two ways Data Hub............................................................................................................................ 5 2.2 – Four ways Data Hub ........................................................................................................................... 6
Appendix – Technical drawings ....................................................................................... 8
2 www.aim-sportline.com
Data Hub 2 and 4 ways User manual Release 1.02
Introduction Data Hub is the new CAN connections multiplier to interface AIM data loggers (MXL Pro/Pista, EVO3 Pro/Pista, EVO4, MyChron4) with its peripherals using one only cable and minimizing wiring overall. Data Hub is available in two versions. Two ways Data Hub with external power. Four ways Data Hub to allow the CAN connection of more peripherals. It is also possible to connect more Data Hub in sequence to increase the number of CAN peripherals connected (see chapter 2 for further information). Data Hub is waterproof IP65.
3 www.aim-sportline.com
Data Hub 2 and 4 ways User manual Release 1.02
0
Chapter 1 – Data Hub: part numbers, optional and installation
Data Hub is available in two versions shown here below: 2 ways and 4 ways.
3
1.1 – Part numbers
Two ways Data Hub:
X08HB2GK0
Four ways Data Hub is available with two different cables: • 4 ways Data Hub with 40 cm cable: • 4 ways Data Hub with 150 cm cable: 4
1.2 – Optional
4 Data Hub external power cable: 5
X08HUB010 X08HUB150
V02557020
1.3 – How to install Data Hub
All Data Hub have lateral installation holes: one for two ways and two for four ways. Please pay attention not to install the hub near to heat sources or source of electromagnetic interference.
4 www.aim-sportline.com
Data Hub 2 and 4 ways User manual Release 1.02
1
Chapter 2 – How to use Data Hub
The two Data Hub are recommended for different applications but the main difference between them is the availability in the two ways version of external power with free cables as shown here below.
Four ways Data Hub, on the contrary, need the proper optional cable for external power to be plugged in one of the 4 inputs. Please note: when installing Data Hub to connect an AIM logger to its external expansion modules, both devices must be OFF.
6
2.1 – Two ways Data Hub
Two ways Data Hub is recommended for those installations that need CAN line remotation or in case SmartyCam, the AIM on board camera, is connected to logger like EVO3 Pro or MXL Pro05 with old generation cables. In those situations SmartyCam is not powered by the logger and needs the external power to be connected to the two ways Data Hub. Below connections schemes show the two situation as well as cables part numbers. To know in which other connections a two ways Data Hub is needed refer to www.smartycam.com connections section.
Mychron4 – GPS Module – Data Key connection with two ways Data Hub.
5 www.aim-sportline.com
Data Hub 2 and 4 ways User manual Release 1.02
MXL Pro05 (with wiring V04.554.24) – SmartyCam connection with two ways Data Hub.
EVO3 Pro (with wiring V04.549.53) – SmartyCam connection with two ways Data Hub.
7
2.2 – Four ways Data Hub
Four ways Data Hub is recommended for those installations that need to increase the number of connected peripherals. Below schemes show connection of EVO3 Pro and MXL Pro05 with SmartyCam as well as part numbers of the needed cables. To know in which other connections a four ways Data Hub is needed refer to www.smartycam.com “Connections” section.
EVO3 Pro (with wiring V04.549.53) – SmartyCam connection with 4 ways Data Hub. External power cable (V02557020) is to be plugged in one of Data Hub four inputs because without an external battery connected to the vehicle master switch AIM logger cannot power SmartyCam too.
6 www.aim-sportline.com
Data Hub 2 and 4 ways User manual Release 1.02
EVO3 Pro (with wiring V04.549.53/A) – SmartyCam connection with 4 ways Data Hub. In the connection scheme here on the left SmartyCam is powered through the CAN connection cable.
MXL Pro05 (with wiring V04.554.24) – SmartyCam connection with 4 ways data hub. External power cable (V02557020), is to be connected to one of the four Data Hub input because without an external battery connected to the vehicle master switch AIM logger cannot power SmartyCam too.
MXL Pro05 (with wiring V04.554.24/A) – SmartyCam connection. In the connection scheme here on the left SmartyCam is powered through the CAN cable. The image here below shows a network with 4 ways Data Hub connected in sequence:
7 www.aim-sportline.com
Data Hub 2 and 4 ways User manual Release 1.02
Appendix – Technical drawings
N. rev. / Rev. N. Descrizione / Description
Firma / Signature
Contr. da / Ckd. by
Rif. / Ref.
Q.tà/Q.ty
Progettato da / Designed by
Material / Material Contr. da / Ckd. by
5 pins Binder female connector Solder termination view
4 2
black cable
red cable +VBext
3
5 1
1 2 3 4 5
5 pins female Binder connector pinout Position 3
CAN+ GND +Vb CAN+VBext
1 2 3 4 5
5 pins female Binder connector pinout Position 4
CAN+ GND +Vb CAN+VBext
5
Two ways Data Hub pinout
4
3
2
1
1 2 3 4 5
5 pins male Binder connector pinout
5 pins male Binder connector Solder termination view
Data / Date
CAN+ GND +Vb CAN+VBext
2
N. articolo / Item N. Approvato da / Approved by
Nome file / File name
Data / Date
Scala / Scale
Titolo / Title
Pinout Data Hub a due vie N. disegno / Drawing N.
Rev. / Rev.
Foglio / Sheet 1 of 1
Racing Data Power
8 www.aim-sportline.com
Rif. / Ref.
Q.tà/Q.ty
Progettato da / Designed by
Contr. da / Ckd. by
Approvato da / Approved by
Titolo / Title
Material / Material
Nome file / File name
N. disegno / Drawing N.
Racing Data Power
www.aim-sportline.com CAN+ GND +Vb CAN+VBext 1 2 3 4 5
CAN+ GND +Vb CAN+VBext
5 pins female Binder connector pinout Position 2
1 2 3 4 5
CAN+ GND +Vb CAN+VBext
5 pins female Binder connector pinout Position 3
1 2 3 4 5
CAN+ GND +Vb CAN+VBext
5 pins female Binder connector pinout Position 4
4
5 3
2
1
1 2 3 4 5
CAN+ GND +Vb CAN+VBext
5 pins male Binder connector pinout
5 pins male Binder connector Solder termination view
N. rev. / Rev. N. Descrizione / Description
1 2 3 4 5
5 pins female Binder connector pinout Position 1
5 pins Binder female connector Solder termination view
4 3
5
1 2
Four ways Data Hub pinout
Data Hub 2 and 4 ways User manual Release 1.02
Data / Date Firma / Signature
Data / Date
Rev. / Rev.
Contr. da / Ckd. by
N. articolo / Item N.
Scala / Scale
Pinout Data Hub a quattro vie
Foglio / Sheet
1 of 1
9
www.aim-sportline.com
Data Hub 2 and 4 ways User manual Release 1.02
Index Chapter 1 – Data Hub: part numbers, optional and installation .................................... 4 1.1 – Part numbers ...................................................................................................................................... 4 1.2 – Optional ............................................................................................................................................... 4 1.3 – How to install Data Hub ..................................................................................................................... 4
Chapter 2 – How to use Data Hub .................................................................................... 5 2.1 – Two ways Data Hub............................................................................................................................ 5 2.2 – Four ways Data Hub ........................................................................................................................... 6
Appendix – Technical drawings ....................................................................................... 8
2 www.aim-sportline.com
Data Hub 2 and 4 ways User manual Release 1.02
Introduction Data Hub is the new CAN connections multiplier to interface AIM data loggers (MXL Pro/Pista, EVO3 Pro/Pista, EVO4, MyChron4) with its peripherals using one only cable and minimizing wiring overall. Data Hub is available in two versions. Two ways Data Hub with external power. Four ways Data Hub to allow the CAN connection of more peripherals. It is also possible to connect more Data Hub in sequence to increase the number of CAN peripherals connected (see chapter 2 for further information). Data Hub is waterproof IP65.
3 www.aim-sportline.com
Data Hub 2 and 4 ways User manual Release 1.02
0
Chapter 1 – Data Hub: part numbers, optional and installation
Data Hub is available in two versions shown here below: 2 ways and 4 ways.
3
1.1 – Part numbers
Two ways Data Hub:
X08HB2GK0
Four ways Data Hub is available with two different cables: • 4 ways Data Hub with 40 cm cable: • 4 ways Data Hub with 150 cm cable: 4
1.2 – Optional
4 Data Hub external power cable: 5
X08HUB010 X08HUB150
V02557020
1.3 – How to install Data Hub
All Data Hub have lateral installation holes: one for two ways and two for four ways. Please pay attention not to install the hub near to heat sources or source of electromagnetic interference.
4 www.aim-sportline.com
Data Hub 2 and 4 ways User manual Release 1.02
1
Chapter 2 – How to use Data Hub
The two Data Hub are recommended for different applications but the main difference between them is the availability in the two ways version of external power with free cables as shown here below.
Four ways Data Hub, on the contrary, need the proper optional cable for external power to be plugged in one of the 4 inputs. Please note: when installing Data Hub to connect an AIM logger to its external expansion modules, both devices must be OFF.
6
2.1 – Two ways Data Hub
Two ways Data Hub is recommended for those installations that need CAN line remotation or in case SmartyCam, the AIM on board camera, is connected to logger like EVO3 Pro or MXL Pro05 with old generation cables. In those situations SmartyCam is not powered by the logger and needs the external power to be connected to the two ways Data Hub. Below connections schemes show the two situation as well as cables part numbers. To know in which other connections a two ways Data Hub is needed refer to www.smartycam.com connections section.
Mychron4 – GPS Module – Data Key connection with two ways Data Hub.
5 www.aim-sportline.com
Data Hub 2 and 4 ways User manual Release 1.02
MXL Pro05 (with wiring V04.554.24) – SmartyCam connection with two ways Data Hub.
EVO3 Pro (with wiring V04.549.53) – SmartyCam connection with two ways Data Hub.
7
2.2 – Four ways Data Hub
Four ways Data Hub is recommended for those installations that need to increase the number of connected peripherals. Below schemes show connection of EVO3 Pro and MXL Pro05 with SmartyCam as well as part numbers of the needed cables. To know in which other connections a four ways Data Hub is needed refer to www.smartycam.com “Connections” section.
EVO3 Pro (with wiring V04.549.53) – SmartyCam connection with 4 ways Data Hub. External power cable (V02557020) is to be plugged in one of Data Hub four inputs because without an external battery connected to the vehicle master switch AIM logger cannot power SmartyCam too.
6 www.aim-sportline.com
Data Hub 2 and 4 ways User manual Release 1.02
EVO3 Pro (with wiring V04.549.53/A) – SmartyCam connection with 4 ways Data Hub. In the connection scheme here on the left SmartyCam is powered through the CAN connection cable.
MXL Pro05 (with wiring V04.554.24) – SmartyCam connection with 4 ways data hub. External power cable (V02557020), is to be connected to one of the four Data Hub input because without an external battery connected to the vehicle master switch AIM logger cannot power SmartyCam too.
MXL Pro05 (with wiring V04.554.24/A) – SmartyCam connection. In the connection scheme here on the left SmartyCam is powered through the CAN cable. The image here below shows a network with 4 ways Data Hub connected in sequence:
7 www.aim-sportline.com
Data Hub 2 and 4 ways User manual Release 1.02
Appendix – Technical drawings
N. rev. / Rev. N. Descrizione / Description
Firma / Signature
Contr. da / Ckd. by
Rif. / Ref.
Q.tà/Q.ty
Progettato da / Designed by
Material / Material Contr. da / Ckd. by
5 pins Binder female connector Solder termination view
4 2
black cable
red cable +VBext
3
5 1
1 2 3 4 5
5 pins female Binder connector pinout Position 3
CAN+ GND +Vb CAN+VBext
1 2 3 4 5
5 pins female Binder connector pinout Position 4
CAN+ GND +Vb CAN+VBext
5
Two ways Data Hub pinout
4
3
2
1
1 2 3 4 5
5 pins male Binder connector pinout
5 pins male Binder connector Solder termination view
Data / Date
CAN+ GND +Vb CAN+VBext
2
N. articolo / Item N. Approvato da / Approved by
Nome file / File name
Data / Date
Scala / Scale
Titolo / Title
Pinout Data Hub a due vie N. disegno / Drawing N.
Rev. / Rev.
Foglio / Sheet 1 of 1
Racing Data Power
8 www.aim-sportline.com
Rif. / Ref.
Q.tà/Q.ty
Progettato da / Designed by
Contr. da / Ckd. by
Approvato da / Approved by
Titolo / Title
Material / Material
Nome file / File name
N. disegno / Drawing N.
Racing Data Power
www.aim-sportline.com CAN+ GND +Vb CAN+VBext 1 2 3 4 5
CAN+ GND +Vb CAN+VBext
5 pins female Binder connector pinout Position 2
1 2 3 4 5
CAN+ GND +Vb CAN+VBext
5 pins female Binder connector pinout Position 3
1 2 3 4 5
CAN+ GND +Vb CAN+VBext
5 pins female Binder connector pinout Position 4
4
5 3
2
1
1 2 3 4 5
CAN+ GND +Vb CAN+VBext
5 pins male Binder connector pinout
5 pins male Binder connector Solder termination view
N. rev. / Rev. N. Descrizione / Description
1 2 3 4 5
5 pins female Binder connector pinout Position 1
5 pins Binder female connector Solder termination view
4 3
5
1 2
Four ways Data Hub pinout
Data Hub 2 and 4 ways User manual Release 1.02
Data / Date Firma / Signature
Data / Date
Rev. / Rev.
Contr. da / Ckd. by
N. articolo / Item N.
Scala / Scale
Pinout Data Hub a quattro vie
Foglio / Sheet
1 of 1
9
