Dopo Double Power 7 Speaker Replacement
Dopo Double Power 7 Speaker Replacement
Dopo Double Power 7 Speaker Replacement This guide will show how to replace the speaker.
Written By: mike pelosi
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 5
Dopo Double Power 7 Speaker Replacement
INTRODUCTION Purchasing a new or used speaker will be necessary if yours is broken. Since the Dopo Double Power 7 is not a very expensive or popular device, finding just the speaker for sale may be difficult. We suggest purchasing a used one with a functional speaker.
TOOLS: iFixit Opening Tools (1) Flush Wire Cutters (1)
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 5
Dopo Double Power 7 Speaker Replacement
Step 1 — Rear Panel
The rear panel is secured to the front case and can simply be pried apart without damage.
Carefully, wedge the plastic opening tool in-between the seam that separates both halves of the tablet.
Step 2
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 5
Dopo Double Power 7 Speaker Replacement
Step 3
Run the plastic opening tool along the seam looking for the clips and lift up on the rear panel.
The rear panel should come completely off.
Step 4
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 4 of 5
Dopo Double Power 7 Speaker Replacement
Step 5 — Speaker
Using wire cutters, cut the red and black wires connected to the speaker.
The speaker is magnetized and not permanently attached.
To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-24 10:23:09 PM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 5 of 5
Dopo Double Power 7 Speaker Replacement This guide will show how to replace the speaker.
Written By: mike pelosi
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 5
Dopo Double Power 7 Speaker Replacement
INTRODUCTION Purchasing a new or used speaker will be necessary if yours is broken. Since the Dopo Double Power 7 is not a very expensive or popular device, finding just the speaker for sale may be difficult. We suggest purchasing a used one with a functional speaker.
TOOLS: iFixit Opening Tools (1) Flush Wire Cutters (1)
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 5
Dopo Double Power 7 Speaker Replacement
Step 1 — Rear Panel
The rear panel is secured to the front case and can simply be pried apart without damage.
Carefully, wedge the plastic opening tool in-between the seam that separates both halves of the tablet.
Step 2
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 5
Dopo Double Power 7 Speaker Replacement
Step 3
Run the plastic opening tool along the seam looking for the clips and lift up on the rear panel.
The rear panel should come completely off.
Step 4
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 4 of 5
Dopo Double Power 7 Speaker Replacement
Step 5 — Speaker
Using wire cutters, cut the red and black wires connected to the speaker.
The speaker is magnetized and not permanently attached.
To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-24 10:23:09 PM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 5 of 5
