DP6A 10Gig, DP6 PLUS & DP5e Patch Panels - Panduit
DP6A 10Gig, DP6 PLUS & DP5e Patch Panels Part Numbers: DP24*88TGY, DP48*88TGY, DPA24*88TGY, DPA48*88TGY, DPKR24**88TG, DPKR48**88TG, DPKA485E88TG
INSTALLATION INSTRUCTIONS
© Panduit Corp. 2012
PN379F
Back 24-Port Angled
Front
24-Port Straight
48-Port Angled
48-Port Straight
2
1
T568B
T568A
CWST 1.5" (38.1mm)
OR
OR
Trim pair separator and/or pull string if present.
3
Option 1
(T568B shown)
T568 BA BA
Option 2
4
PDT110 Tool
(T568B shown)
T568 BA BA
Do not untwist more then 1/8" from the IDC tower
5
6 T568 BA BA
T568 BA BA
(T568B shown)
(T568B shown) * Denotes “6X” for DP6A 10Gig, “6” for DP6 PLUS and “5E” for DP5e Patch Panels. ** Denotes “6” for DP6 PLUS and “5E” for DP5e Patch Panels.
Note: Part numbers with “K” and “KR” include a label kit and strain relief bar.
For Technical Support: www.panduit.com/resources/install_maintain.asp Page 1 of 2
INSTALLATION INSTRUCTIONS
© Panduit Corp. 2012
PN379F
8
7
RECOMMENDED CABLE ROUTING Angled Panels
Straight Panels Optional Strain Relief Bar
B
B
Cable Management A
A
Recommended cable routing for angled panel terminated ports. Terminate cables in the direction from A to B as indicated above.
Jack Module Removal
Depress latch on module
Recommended cable routing for straight panel terminated ports.
2 3
COLOR-CODED WIRE POSITIONS
1 Pin T568B outs WHITE/BLUE T1 5 BLUE R1 4 WHITE/GREEN T3 3 GREEN R3 6 1 WHITE/ORANGE T2 ORANGE R2 2 WHITE/BROWN T4 7 BROWN R4 8
4
Jack Module Installation
Pin outs 1
8
Pin T568A outs 5 WHITE/BLUE T1 4 BLUE R1 1 WHITE/GREEN T2 2 GREEN R2 3 WHITE/ORANGE T3 6 ORANGE R3 7 WHITE/BROWN T4 BROWN 8 R4
Notes: 1. DP6A 10Gig Patch Panels can terminate most 22-26 AWG solid or stranded wire with a .050" (1.27mm) max. o.d., either PVC or Plenum rated. 2. Never install wire into a slot previously used for a larger gauge wire. 3. Never install communications wiring during a lightning storm. 4. Never install communications wiring in wet locations unless the module is specifically designed for use in wet locations. 5. Never touch uninsulated communications wiring or terminals unless the communication line has been disconnected at the network interface. 6. Use caution when installing or modifying communication wiring. E-mail: [email protected]
For Instructions in Local Languages and Technical Support: www.panduit.com/resources/install_maintain.asp
www.panduit.com Page 2 of 2
Phone: 866-405-6654
INSTALLATION INSTRUCTIONS
© Panduit Corp. 2012
PN379F
Back 24-Port Angled
Front
24-Port Straight
48-Port Angled
48-Port Straight
2
1
T568B
T568A
CWST 1.5" (38.1mm)
OR
OR
Trim pair separator and/or pull string if present.
3
Option 1
(T568B shown)
T568 BA BA
Option 2
4
PDT110 Tool
(T568B shown)
T568 BA BA
Do not untwist more then 1/8" from the IDC tower
5
6 T568 BA BA
T568 BA BA
(T568B shown)
(T568B shown) * Denotes “6X” for DP6A 10Gig, “6” for DP6 PLUS and “5E” for DP5e Patch Panels. ** Denotes “6” for DP6 PLUS and “5E” for DP5e Patch Panels.
Note: Part numbers with “K” and “KR” include a label kit and strain relief bar.
For Technical Support: www.panduit.com/resources/install_maintain.asp Page 1 of 2
INSTALLATION INSTRUCTIONS
© Panduit Corp. 2012
PN379F
8
7
RECOMMENDED CABLE ROUTING Angled Panels
Straight Panels Optional Strain Relief Bar
B
B
Cable Management A
A
Recommended cable routing for angled panel terminated ports. Terminate cables in the direction from A to B as indicated above.
Jack Module Removal
Depress latch on module
Recommended cable routing for straight panel terminated ports.
2 3
COLOR-CODED WIRE POSITIONS
1 Pin T568B outs WHITE/BLUE T1 5 BLUE R1 4 WHITE/GREEN T3 3 GREEN R3 6 1 WHITE/ORANGE T2 ORANGE R2 2 WHITE/BROWN T4 7 BROWN R4 8
4
Jack Module Installation
Pin outs 1
8
Pin T568A outs 5 WHITE/BLUE T1 4 BLUE R1 1 WHITE/GREEN T2 2 GREEN R2 3 WHITE/ORANGE T3 6 ORANGE R3 7 WHITE/BROWN T4 BROWN 8 R4
Notes: 1. DP6A 10Gig Patch Panels can terminate most 22-26 AWG solid or stranded wire with a .050" (1.27mm) max. o.d., either PVC or Plenum rated. 2. Never install wire into a slot previously used for a larger gauge wire. 3. Never install communications wiring during a lightning storm. 4. Never install communications wiring in wet locations unless the module is specifically designed for use in wet locations. 5. Never touch uninsulated communications wiring or terminals unless the communication line has been disconnected at the network interface. 6. Use caution when installing or modifying communication wiring. E-mail: [email protected]
For Instructions in Local Languages and Technical Support: www.panduit.com/resources/install_maintain.asp
www.panduit.com Page 2 of 2
Phone: 866-405-6654
