DSI, Inc.
MSD Auto Reset Slurry Injector MSD Auto Reset Slurry Injector Dietrich
70 70
Dietrich Series Series 8 Inch Optional Cast Steel Specifications • • • • •
Chisel Point Sweep
Attaches to a 4” X 6” tool bar Auto reset with 1400# reset force 1-1/4” X 2” edge bent 5160 alloy steel shank 22 1/2” heavy duty spring coulter Cast steel Chisel Point Sweeps (featured on back page) • Wing drop, 3”, 3-1/2”, or 4” O.D. slurry tubes available • Separately replaceable sweeps & tubes
Designed for. . . • DURABILITY • PERFORMANCE • CONVENIENCE
NOT an ordinary injector!
New
• Designed for Minimum Soil Disturbance at higher speeds.
Specifica
• Sweep bolts to 1-1/4” x 2” edge bent alloy shank. Design Features Advantages • Attaches to 8•Inch Optional Cast Steel 1/2” thick chisel point sweep shank combined • 70° forward angled zerk for easier access • Only end of season shank pivot greasing Chisel Point Sweep • Auto reset w • Grease after spring & fall seasons to minimize with 62 degree swept back wings results in rust when not in use. 8 Inch Optional Cast Steel New Chisel Point Sweep • 1-1/4” x 2” • Designed for Minimum Soil Disturbance Chisel Pointcoulter Sweep-soil minimum disturbance and allows • Easy - No shallow tools required adjustment • Snap pin adjust No set screws at higher speeds. • Cast Steel C • No set screws rusted and broken off Specifications New Chisel placement of nutrients. • No shafts sliding down Point Sweep Sweep bolts 1-1/4” x 2” edge bent alloy shank. • Designed fortoMinimum Soil Disturbance • Hi Chrome •Specifications to 4” x 6” tool barcoulter depth to • Attaches New heavier spring maintains • New 800# coulter down pressure spring assembly at higher speeds. • Most 1/2”New thick chisel point point sweep shank combined chisel sweep hard soil. prevent residue hair pinning • others range from 200 - 350# down pressure penetrates • Auto reset with 1400# reset force • Hard surfac with 62 degree swept back wings results inshank. • Sweep bolts to 1-1/4” x 2” edge bent alloy • 1-1/4” x 2” edge bent 5160 Alloy Steel Shank • Attaches Larger 22-1/2” blade O.D. slur • 22-1/2” diameter - Not 20” Chrome tip is supported by the casting minimum soil coulter disturbance and allows shallow •steel to 4”diameter x 6” tip. tool barprovides better • 3” • Cast Steel Chisel Point Sweep • 1/2” thick chisel point sweep shank combined cutting action through tough GMO residue than 20” placement of nutrients. • Auto reset with 1400# reset force • Hi Chrome Cast Tip with 62 degree swept back wings results in • Separately r 1-1/4” x8”2”trip edge bent 5160 Alloy Steel Shank Provides clearance • • • Auto reset - Not spring bundle Provides for maximum nutrient ••• uptake New chisel point sweep penetrates hard soil. Hard surfaced sweeps and much more resistance minimum soil disturbance and allows shallow to floating. pressure plus benefits of lower • Cast Steel 1400# Chiseltrip Point Sweep • 22 1/2 inch Chrome tipofisnutrients. supported by the steel casting tip. • 3” O.D. slurry placement force at full trip. tube in aerobic zone. • Hi Chrome Cast Tip • Separately replaceable sweeps and tubes • New Provides forpoint maximum nutrient uptake chisel - 8” Low R • Hard surfacedthan sweeps 250% X 2”spring flat • 1-1/4” X 2” edge bentsweep shankspenetrates - Not 1” X 2” hard soil. •• 22 1/2stronger inch heavy 1” duty coulter in aerobic zone. is supported by the steel casting tip. 1” XO.D. 2” flatslurry shank tube does not maintain constant sweep •• 3” •Chrome Newtip Heavier Coulter Spring -angle 8” Low Sweeps • Separately due toRate deflection in variable replaceable sweepssoil andconditions. tubes- 8” Hi Rate • Provides New Heavier Coulter Spring for maximum nutrient uptake - 8” Hi Rate Sweeps •• 22 1/2 inchshallow heavyoperation duty spring coulter resulting in fuel • • • Narrow 1/2”1/2” sweep shank Large 22 1/2” coulters - 12” Hi Ra in aerobic zone. Large 22 coulters to slice through to slice through -This 12”allows Hi Rate Sweeps -savings. Most tillage apparatus will require 100% Sweeps lift the soil less than 1-1/4” 8” Low Rate Sweeps heavyHeavier residue.Coulter Spring -more horsepower when operated 50% deeper. • New heavy residue. 8” Hi Rate Sweeps US Patents 5865131 • 6973884 • 8544395 • Other Patents Pending
• Convenient – no tools required – wire pin
Large 22 special 1/2” coulters to slice through • • Hi carbon, bar quality, cast steel chisel adjust colters. heavysweep residue. point with front hi chrome casting and heavy, abrasion-resistant hard surfacing on the wings
12”breakage Hi Sweeps USRate Patents 5865131 • 6973884 • -Less • Longer wear Other Patents Pending • Lower cost per acre
• Convenient – no tools required – wire pin • Convenient – no tools required – wire pin US Patents 5865131 adjust colters. • Prevents hose damage • Tube pivot adjust colters.
DSI, Inc.
417 State Highway 117 Goodfield, IL Ph. 309 965-5110 417 State Highway 117 Goodfield, IL Ph. 309 965-5110
DSI, Inc.
DSI, Inc.
• 6973884 Other Patents Pending
Mailing Address: 250 County Rd. 1425E Goodfield, IL 61742 Mailing Address: 250 County Rd. 1425E Goodfield, IL 61742
417 State Highway 117
US Pa
www.dsiag.com www.dsiag.com
Mailing Address:
The Dietrich Slurry Injector and
Soil Fertility Stratification Soil Fertility and Plant Nutrients • Minimum Tillage causes soil fertility to be high in the top 3” of soil and low at deeper depths. • Each year the nutrients from the previous year’s crop residue are mixed mostly in the top 3” of soil. • Spreading with disc incorporators or rotary injectors results in more fertility in the top 3”. • Between summer rains, quite often, the top 3” of soil is dry and the plant is unable to use this area of high fertility.
Field Tests • Various field tests have often shown deep placement of plant nutrients substantially increases yields, compared to surface application.
Conclusion • With injection 5” - 6” deep, a substantial amount of nutrients are available between summer rains. • All Agronomists agree nutrients should be placed in the Green Zone (5”-6” depth) for maximum yield. Spring Rains
Between Summer Rains
0” -
Soil Depth
1” 2” -
0” - 3” depth High Fertility Area Adequate Moisture Plant Nutrients From This Area
0” - 3” depth High Fertility Area Dry
3” 4” 5” 6”
3” - 6” depth Low Fertility Area Adequate Moisture
3” - 6” depth Low Fertility Area Adequate Moisture 5” - 6” depth - target injection zone Plant Nutrients From This Area
The top 6” of soil depth is generally considered the aerobic zone - i.e. the zone with oxygen.
Below 6” of soil depth is called the anaerobic zone because of the lack of oxygen. Plant Nutrients are more available in the top 6” of soil because a much greater amount of oxygen is present in the soil. The oxygen in the aerobic zone also helps break down the nutrients in animal waste to become available to the plants. Placing the nutrients in the 5”- 6” depth rather than the surface has several benefits. 1.
Plants cannot take up nutrients in dry soil. As soon as the surface soil dries, the nutrients are not available.
2.
Nitrogen does not escape to the atmosphere.
3.
Nutrients are not lost to erosion.
4.
Less weed pressure - High surface fertility promotes weed germination.
Each 1,000 gallons of Grow-Finish Hog Manure contains approximately:
Each 1,000 gallons of Dairy Manure contains approximately: Cost per lb.
Cost per lb. * 45 lbs. of Nitrogen 38 lbs. of Phosphorus 30 lbs. of Potassium
.56 .38 .39
Total Value per 1,000 gal:
$25.20 $14.44 $11.70
* 35 lbs. of Nitrogen 15 lbs. of Phosphorus 26 lbs. of Potassium
.56 .38 .39
$51.34
Total Value per 1,000 gal:
* Not all nitrogen is available during the first growing season. Amount available varies according to climate and location. * Commercial Fertilizer Prices change frequently.
For More Information Please Visit www.dsiag.com
25 Wave Conical Blade • Optional shallow form conical blade for sweep injecting in corn on corn conditions • Clears a pathway ahead of the sweep Patents Pending
$19.60 $ 5.70 $10.14 $35.44
THE COMPLETE DIETRICH CONICAL BLADE ROTARY/SWEEP INJECTION SYSTEM FOLLOWED BY THE DIETRICH SLURRY CLOZR Patents Pending
MSD Auto Reset Slurry Injector Dietrich Series 8 Inch Optional Cast Steel
70
Chisel Point Sweep
New
• Designed for Minimum Soil Disturbance at higher speeds. • Sweep bolts to 1-1/4” x 2” edge bent alloy shank.
Specifica
This complete injection system includes the Dietrich Series 70 Assembly with 800# Down Pressure Coulter Assy, Coulter Mount, 13 Wave Swivel Conical Blade, 4” Rotary Injection Discharge Tube & Bracket, your choice of Chisel Point Sweep & Discharge Tube, & the Dietrich Clozr with choice of Notched Blades.
• Attaches to • 1/2” thick chisel point sweep shank combined • Auto reset w The vertical tillage industry doesswept not yet know whatwings the maximum gallonsin per acre will be in wet soil condiwith 62 degree back results 88 Inch Cast Steel tions. Wet soil tends have a plastic characteristic. This condition creates minimal cavity size plus soil Inch Optional Optional Castto Steel • wet 1-1/4” x 2” Point doesChisel not soak upSweep excesssoil liquid.disturbance and allows shallow minimum Chisel Point Sweep • Cast Steel C To getplacement a better perspective the liquid volume, imagine a circle of liquidChisel 3.8” in diameter be created in the New Pointwill Sweep ofofnutrients. •direction for Soil Disturbance of travel at a 10,000 GPA rate. At 5,000 GPA the circle of liquid is 2.7” in diameter. Now it•is possible • Designed Designed for Minimum Minimum Soil Disturbance Hi Chrome to at inject up to 15,000 gallons or more per acre in any soil condition using Rotary Injection for lower gallons per higher speeds. at higher speeds. Specifications • and New sweep penetrates soil.that limit gallons •perHard surfac acre easilychisel convert topoint Sweep Injection for wet or compactedhard soil conditions acre. •• Sweep Sweep bolts bolts to to 1-1/4” 1-1/4” xx 2” 2” edge edge bent bent alloy alloy shank. shank. Chrome tip sweep is supported by the •steel casting to tool • 3” O.D. slur • Attaches Attaches to 4” 4” xx 6” 6”tip. tool bar bar •• 1/2” combined • thick Easy chisel change oversweep in theshank field between Sweep & Rotary Injection 1/2” thick chisel point point shank combined •• Auto reset with 1400# reset force Auto reset with 1400# reset force with 62 swept back results in with 62 degree degreeSwivel sweptConical back wings wings results in slot for nutrient • Separately r • Provides 13 Wave Blade to widen placement ••uptake 1-1/4” xx 2” 1-1/4” 2” edge edge bent bent 5160 5160 Alloy Alloy Steel Steel Shank Shank •minimum for maximum nutrient soil disturbance and allows shallow minimum soil disturbance and allows shallow •• Cast Steel Sweep Cast Steel Chisel Point Point Sweep • Unique Conical Coulter Blade enters the soil Chisel parallel to the direction of • travel 22 1/2 inch placement of nutrients. placement ofSwivel-mounted nutrients. inandaerobic zone. •• Hi Chrome Cast Hidepth Chrome Cast Tip Tip for maximum gallons exits moving soil laterally resulting in maximum penetration •• New point hard - 8” Low R •• Hard sweeps New chisel chisel point sweep sweep penetrates hard soil. soil. per acre. Does notpenetrates create excessive side load on mounting or tank. Hard surfaced surfaced sweeps tip is by the tip. •• 3” Chrome tip Heavier is supported supported by the steel steel casting casting tip. 3” O.D. O.D. slurry slurry tube tube •Chrome Coulter Spring • New Individual depth adjustment - 8” Hi Rate •• Separately Separately replaceable replaceable sweeps sweeps and and tubes tubes •• Provides for maximum nutrient uptake Provides for maximum nutrient uptake Option to run Coulters deeper behind tank tires in•• muddy conditions 22 heavy 22 1/2 1/2 inch inch heavy duty duty spring spring coulter coulter - 12” Hi Ra •inin• aerobic Large 22 1/2” coulters to slice through zone. aerobic zone. -- 8” 8” Low Low Rate Rate Sweeps Sweeps • Designed for speeds up to 8 MPH •• New Heavier Spring heavy residue. New Heavier Coulter Coulter Spring -- 8” Hi Sweeps 8”Point Hi Rate Rate Sweeps • Available 8” Low Rate, 8” Hi Rate, or 12” Hi Rate Chisel Sweeps depending on your desired •• Large 22 coulters -- 12” Largegallons 22 1/2” 1/2”per coulters to slice slice through through 12” Hi Hi Rate Rate Sweeps Sweeps acre. to heavy heavy residue. residue. • Wing drop or 3”, 3-1/2”, or 4” OD Tube available on all Chisel Point Sweeps •• Convenient Convenient –– no no tools tools required required –– wire wire pin pin Patents •• 6973884 US Patents 5865131 6973884 • 4” Rotary Injection Discharge Tube & Bracket for use withUS 2-1/2” & 3”5865131 hoses adjust colters. adjust colters. Other Other Patents Patents Pending Pending
• Convenient – no tools required – wire pin adjust colters.
DSI, Inc.
DSI, Inc.
417 417 State State Highway Highway 117 117 Goodfield, IL Goodfield, IL Ph. Ph. 309 309 965-5110 965-5110
Mailing Mailing Address: Address: 250 County 250 County Rd. Rd. 1425E 1425E Goodfield, Goodfield, IL IL 61742 61742
417 State Highway 117
US Pa
01/08/14
www.dsiag.com
Mailing Address:
DIETRICH SLURRY CLOZR MSD Auto Reset Slurry Injector
Patents Pending
Designed to be used continuously as part of the Dietrich Dietrich Conical Blade Rotary/Sweep Injection System or as desired Series with the Cast Dietrich 8 Inch Optional Steel AR Slurry Sweep Injector
70
Chisel Point Sweep
New
• Designed for Minimum Soil Disturbance at higher speeds. • Sweep bolts to 1-1/4” x 2” edge bent alloy shank.
Specifica
• Attaches to • 1/2” thick chisel point sweep shank combined • Auto reset w with 62 degree swept back wings results in 88 Inch Inch Optional Optional Cast Cast Steel Steel • 1-1/4” x 2” Chisel Point Sweep Chisel Point Sweep soil disturbance and allows shallow minimum * Shown with spherical notched blades and * Shown with spherical notched blades • Cast Steel C New Chisel Point Sweep 4” Rotary Injection Discharge Tube & Bracket and 8” Hi Rate Chisel Sweep & 3” Tube New Chisel Point Sweep placement of nutrients. •• Designed Designed for for Minimum Minimum Soil Soil Disturbance Disturbance • Hi Chrome at higher speeds. Specifications at higher speeds. Specifications • New chisel point sweep penetrates hard soil. • Hard surfac •• Sweep Sweep bolts bolts to to 1-1/4” 1-1/4” xx 2” 2” edge edge bent bent alloy alloy shank. shank. ••steel Attaches to tool Chrome tiptosweep isshank supported by the casting Attaches to 4” 4” xx 6” 6” tip. tool bar bar • 3” O.D. slur •• 1/2” chisel shank • Clamps forcombined improved residue flow 1/2” thick thick chisel point point sweep shank combined •• Auto reset with 1400# reset force Auto reset with 1400# reset force with with 62 62 degree degree swept swept back back wings wings results results in in 1-1/4” • Shank Separately r 1-1/4” xx 2” 2” edge edge bent bent 5160 5160 Alloy Alloy Steel Steel Shank soil disturbance and allows • Vertically adjustable •minimum Provides for maximum nutrient •••uptake minimum soil disturbance and allows shallow shallow • Cast Cast Steel Steel Chisel Chisel Point Point Sweep Sweep placement of nutrients. • 22 1/2 inch placement of nutrients. • Hi Chrome Cast Tip in• aerobic zone. • Hi Chrome Cast Tip Larger spindle than anhydrous ammonia sealers •• New •• Hard New chisel chisel point point sweep sweep penetrates penetrates hard hard soil. soil. - 8” Low R Hard surfaced surfaced sweeps sweeps Chrome tip is supported by the steel casting tip. • 3” O.D. slurry tube • Square holes for carriage bolts to prevent rounding when adjusting is supported by the steel casting tip. • 3” O.D. slurry tube •Chrome Newtip Heavier Coulter Spring • • Separately Separately replaceable replaceable sweeps sweeps and and tubes tubes- 8” Hi Rate •• Provides for maximum nutrient uptake Provides for maximum nutrient uptake • High for durability •• 22 22 1/2 1/2 inch inch heavy heavy duty duty spring spring coulter coulter - 12” Hi Ra zone. •inin aerobic Large 22tensile 1/2” steel coulters to slice through aerobic zone. -- 8” Low Rate Sweeps 8” Low Rate Sweeps • Choice ofSpring 18” spherical or new flat notched blades •• New Heavier Coulter -- 8” Newheavy Heavier Coulter Spring residue. 8” Hi Hi Rate Rate Sweeps Sweeps •• Large 1/2” coulters -- 12” Large 22 1/2” coulters to to slice slice through 12” Hi Hi Rate Rate Sweeps Sweeps • 22 Substantial rockthrough clearance heavy residue. heavy residue. • Grease zerks for rust prevention when notUSinPatents use 5865131 • 6973884 •• Convenient Convenient –– no no tools tools required required –– wire wire pin pin US Patents 5865131 • 6973884 adjust adjust colters. colters. Other Patents Other Patents Pending Pending
• Convenient – no tools required – wire pin adjust colters.
DSI, Inc.
DSI, Inc.
417 417 State State Highway Highway 117 117 Goodfield, Goodfield, IL IL Ph. Ph. 309 309 965-5110 965-5110
Mailing Mailing Address: Address: 250 250 County County Rd. Rd. 1425E 1425E Goodfield, IL 61742 Goodfield, IL 61742
417 State Highway 117
US Pa 01/08/14
www.dsiag.com
Mailing Address:
Dietrich Series 70 Chisel Point Sweeps
Dietrich Series 70 Chisel Point Sweeps 8” LOW RATE SWEEP
• Shown with standard 3” tube • 8” wing width •
Designed for hi speed (5 – 8 mph) and lower rates (2,500 – 5,000 gallons per acre) to meet the E.P.A. Phosphorus Rules.
• Lifts the soil less than 1” • Vertical shank portion is 1/2” thick • The 8” Low Rate Sweep moves less soil, allowing higher speeds at low rates.
12” HI RATE SWEEP
8” HI RATE SWEEP
• Shown with optional 3-1/2” tube and clip (2-1/2” hose fits inside)
• Shown with optional 4” tube and clip (3” hose fits inside)
• 8” wing width
• 12” wing width
• Designed for higher rates (5,000 – 10,000 gallons per acre)
• Designed for higher rates (10,000 – 15,000 plus gallons per acre; 20,000 gal. optional)
• Lifts the soil less than 1-1/4”
• Lifts the soil less than 1-1/4”
•
Vertical portion is 1” thick at the lower rear to create a wider slot to facilitate the filling of the soil cavity created by the wings.
•
Vertical portion is 1” thick at the lower rear to create a wider slot to facilitate the filling of the soil cavity created by the wings.
•
The 8” hi rate sweep parts the soil more and creates a larger soil cavity than the 8” low rate sweep to contain the liquid.
•
The 12” hi rate sweep parts the soil more and creates a larger soil cavity than the 8” hi rate sweep to contain the liquid.
Design Features (Series 70 Sweeps) • Series 70 Chisel Point Sweeps are designed to penetrate frozen soil. • 1/2” thick Chisel Point Sweep shank combined with 62 degree swept back wings results in minimum soil disturbance and allows shallow placement of nutrients. • The sweeps are designed with thin Vertical Portion Hi Carbon steel to minimize soil disturbance at high speeds. • To prevent breakage, the sweeps are attached to a 1-1/4” X 2” edge bent alloy steel shank to allow side movements when striking rocks. • Standard 3” or optional 3-1/2” & 4” OD tubes with clip available on all sweep sizes.
US Patents 5865131
6973884
8544395
Other Patents Pending
Wing Drop Tube • Option for sweep injecting
• Fits both
2-1/2” & 3” Hoses
• Enhanced
plug-free performance 01/08/14
70 70
Dietrich Series Series 8 Inch Optional Cast Steel Specifications • • • • •
Chisel Point Sweep
Attaches to a 4” X 6” tool bar Auto reset with 1400# reset force 1-1/4” X 2” edge bent 5160 alloy steel shank 22 1/2” heavy duty spring coulter Cast steel Chisel Point Sweeps (featured on back page) • Wing drop, 3”, 3-1/2”, or 4” O.D. slurry tubes available • Separately replaceable sweeps & tubes
Designed for. . . • DURABILITY • PERFORMANCE • CONVENIENCE
NOT an ordinary injector!
New
• Designed for Minimum Soil Disturbance at higher speeds.
Specifica
• Sweep bolts to 1-1/4” x 2” edge bent alloy shank. Design Features Advantages • Attaches to 8•Inch Optional Cast Steel 1/2” thick chisel point sweep shank combined • 70° forward angled zerk for easier access • Only end of season shank pivot greasing Chisel Point Sweep • Auto reset w • Grease after spring & fall seasons to minimize with 62 degree swept back wings results in rust when not in use. 8 Inch Optional Cast Steel New Chisel Point Sweep • 1-1/4” x 2” • Designed for Minimum Soil Disturbance Chisel Pointcoulter Sweep-soil minimum disturbance and allows • Easy - No shallow tools required adjustment • Snap pin adjust No set screws at higher speeds. • Cast Steel C • No set screws rusted and broken off Specifications New Chisel placement of nutrients. • No shafts sliding down Point Sweep Sweep bolts 1-1/4” x 2” edge bent alloy shank. • Designed fortoMinimum Soil Disturbance • Hi Chrome •Specifications to 4” x 6” tool barcoulter depth to • Attaches New heavier spring maintains • New 800# coulter down pressure spring assembly at higher speeds. • Most 1/2”New thick chisel point point sweep shank combined chisel sweep hard soil. prevent residue hair pinning • others range from 200 - 350# down pressure penetrates • Auto reset with 1400# reset force • Hard surfac with 62 degree swept back wings results inshank. • Sweep bolts to 1-1/4” x 2” edge bent alloy • 1-1/4” x 2” edge bent 5160 Alloy Steel Shank • Attaches Larger 22-1/2” blade O.D. slur • 22-1/2” diameter - Not 20” Chrome tip is supported by the casting minimum soil coulter disturbance and allows shallow •steel to 4”diameter x 6” tip. tool barprovides better • 3” • Cast Steel Chisel Point Sweep • 1/2” thick chisel point sweep shank combined cutting action through tough GMO residue than 20” placement of nutrients. • Auto reset with 1400# reset force • Hi Chrome Cast Tip with 62 degree swept back wings results in • Separately r 1-1/4” x8”2”trip edge bent 5160 Alloy Steel Shank Provides clearance • • • Auto reset - Not spring bundle Provides for maximum nutrient ••• uptake New chisel point sweep penetrates hard soil. Hard surfaced sweeps and much more resistance minimum soil disturbance and allows shallow to floating. pressure plus benefits of lower • Cast Steel 1400# Chiseltrip Point Sweep • 22 1/2 inch Chrome tipofisnutrients. supported by the steel casting tip. • 3” O.D. slurry placement force at full trip. tube in aerobic zone. • Hi Chrome Cast Tip • Separately replaceable sweeps and tubes • New Provides forpoint maximum nutrient uptake chisel - 8” Low R • Hard surfacedthan sweeps 250% X 2”spring flat • 1-1/4” X 2” edge bentsweep shankspenetrates - Not 1” X 2” hard soil. •• 22 1/2stronger inch heavy 1” duty coulter in aerobic zone. is supported by the steel casting tip. 1” XO.D. 2” flatslurry shank tube does not maintain constant sweep •• 3” •Chrome Newtip Heavier Coulter Spring -angle 8” Low Sweeps • Separately due toRate deflection in variable replaceable sweepssoil andconditions. tubes- 8” Hi Rate • Provides New Heavier Coulter Spring for maximum nutrient uptake - 8” Hi Rate Sweeps •• 22 1/2 inchshallow heavyoperation duty spring coulter resulting in fuel • • • Narrow 1/2”1/2” sweep shank Large 22 1/2” coulters - 12” Hi Ra in aerobic zone. Large 22 coulters to slice through to slice through -This 12”allows Hi Rate Sweeps -savings. Most tillage apparatus will require 100% Sweeps lift the soil less than 1-1/4” 8” Low Rate Sweeps heavyHeavier residue.Coulter Spring -more horsepower when operated 50% deeper. • New heavy residue. 8” Hi Rate Sweeps US Patents 5865131 • 6973884 • 8544395 • Other Patents Pending
• Convenient – no tools required – wire pin
Large 22 special 1/2” coulters to slice through • • Hi carbon, bar quality, cast steel chisel adjust colters. heavysweep residue. point with front hi chrome casting and heavy, abrasion-resistant hard surfacing on the wings
12”breakage Hi Sweeps USRate Patents 5865131 • 6973884 • -Less • Longer wear Other Patents Pending • Lower cost per acre
• Convenient – no tools required – wire pin • Convenient – no tools required – wire pin US Patents 5865131 adjust colters. • Prevents hose damage • Tube pivot adjust colters.
DSI, Inc.
417 State Highway 117 Goodfield, IL Ph. 309 965-5110 417 State Highway 117 Goodfield, IL Ph. 309 965-5110
DSI, Inc.
DSI, Inc.
• 6973884 Other Patents Pending
Mailing Address: 250 County Rd. 1425E Goodfield, IL 61742 Mailing Address: 250 County Rd. 1425E Goodfield, IL 61742
417 State Highway 117
US Pa
www.dsiag.com www.dsiag.com
Mailing Address:
The Dietrich Slurry Injector and
Soil Fertility Stratification Soil Fertility and Plant Nutrients • Minimum Tillage causes soil fertility to be high in the top 3” of soil and low at deeper depths. • Each year the nutrients from the previous year’s crop residue are mixed mostly in the top 3” of soil. • Spreading with disc incorporators or rotary injectors results in more fertility in the top 3”. • Between summer rains, quite often, the top 3” of soil is dry and the plant is unable to use this area of high fertility.
Field Tests • Various field tests have often shown deep placement of plant nutrients substantially increases yields, compared to surface application.
Conclusion • With injection 5” - 6” deep, a substantial amount of nutrients are available between summer rains. • All Agronomists agree nutrients should be placed in the Green Zone (5”-6” depth) for maximum yield. Spring Rains
Between Summer Rains
0” -
Soil Depth
1” 2” -
0” - 3” depth High Fertility Area Adequate Moisture Plant Nutrients From This Area
0” - 3” depth High Fertility Area Dry
3” 4” 5” 6”
3” - 6” depth Low Fertility Area Adequate Moisture
3” - 6” depth Low Fertility Area Adequate Moisture 5” - 6” depth - target injection zone Plant Nutrients From This Area
The top 6” of soil depth is generally considered the aerobic zone - i.e. the zone with oxygen.
Below 6” of soil depth is called the anaerobic zone because of the lack of oxygen. Plant Nutrients are more available in the top 6” of soil because a much greater amount of oxygen is present in the soil. The oxygen in the aerobic zone also helps break down the nutrients in animal waste to become available to the plants. Placing the nutrients in the 5”- 6” depth rather than the surface has several benefits. 1.
Plants cannot take up nutrients in dry soil. As soon as the surface soil dries, the nutrients are not available.
2.
Nitrogen does not escape to the atmosphere.
3.
Nutrients are not lost to erosion.
4.
Less weed pressure - High surface fertility promotes weed germination.
Each 1,000 gallons of Grow-Finish Hog Manure contains approximately:
Each 1,000 gallons of Dairy Manure contains approximately: Cost per lb.
Cost per lb. * 45 lbs. of Nitrogen 38 lbs. of Phosphorus 30 lbs. of Potassium
.56 .38 .39
Total Value per 1,000 gal:
$25.20 $14.44 $11.70
* 35 lbs. of Nitrogen 15 lbs. of Phosphorus 26 lbs. of Potassium
.56 .38 .39
$51.34
Total Value per 1,000 gal:
* Not all nitrogen is available during the first growing season. Amount available varies according to climate and location. * Commercial Fertilizer Prices change frequently.
For More Information Please Visit www.dsiag.com
25 Wave Conical Blade • Optional shallow form conical blade for sweep injecting in corn on corn conditions • Clears a pathway ahead of the sweep Patents Pending
$19.60 $ 5.70 $10.14 $35.44
THE COMPLETE DIETRICH CONICAL BLADE ROTARY/SWEEP INJECTION SYSTEM FOLLOWED BY THE DIETRICH SLURRY CLOZR Patents Pending
MSD Auto Reset Slurry Injector Dietrich Series 8 Inch Optional Cast Steel
70
Chisel Point Sweep
New
• Designed for Minimum Soil Disturbance at higher speeds. • Sweep bolts to 1-1/4” x 2” edge bent alloy shank.
Specifica
This complete injection system includes the Dietrich Series 70 Assembly with 800# Down Pressure Coulter Assy, Coulter Mount, 13 Wave Swivel Conical Blade, 4” Rotary Injection Discharge Tube & Bracket, your choice of Chisel Point Sweep & Discharge Tube, & the Dietrich Clozr with choice of Notched Blades.
• Attaches to • 1/2” thick chisel point sweep shank combined • Auto reset w The vertical tillage industry doesswept not yet know whatwings the maximum gallonsin per acre will be in wet soil condiwith 62 degree back results 88 Inch Cast Steel tions. Wet soil tends have a plastic characteristic. This condition creates minimal cavity size plus soil Inch Optional Optional Castto Steel • wet 1-1/4” x 2” Point doesChisel not soak upSweep excesssoil liquid.disturbance and allows shallow minimum Chisel Point Sweep • Cast Steel C To getplacement a better perspective the liquid volume, imagine a circle of liquidChisel 3.8” in diameter be created in the New Pointwill Sweep ofofnutrients. •direction for Soil Disturbance of travel at a 10,000 GPA rate. At 5,000 GPA the circle of liquid is 2.7” in diameter. Now it•is possible • Designed Designed for Minimum Minimum Soil Disturbance Hi Chrome to at inject up to 15,000 gallons or more per acre in any soil condition using Rotary Injection for lower gallons per higher speeds. at higher speeds. Specifications • and New sweep penetrates soil.that limit gallons •perHard surfac acre easilychisel convert topoint Sweep Injection for wet or compactedhard soil conditions acre. •• Sweep Sweep bolts bolts to to 1-1/4” 1-1/4” xx 2” 2” edge edge bent bent alloy alloy shank. shank. Chrome tip sweep is supported by the •steel casting to tool • 3” O.D. slur • Attaches Attaches to 4” 4” xx 6” 6”tip. tool bar bar •• 1/2” combined • thick Easy chisel change oversweep in theshank field between Sweep & Rotary Injection 1/2” thick chisel point point shank combined •• Auto reset with 1400# reset force Auto reset with 1400# reset force with 62 swept back results in with 62 degree degreeSwivel sweptConical back wings wings results in slot for nutrient • Separately r • Provides 13 Wave Blade to widen placement ••uptake 1-1/4” xx 2” 1-1/4” 2” edge edge bent bent 5160 5160 Alloy Alloy Steel Steel Shank Shank •minimum for maximum nutrient soil disturbance and allows shallow minimum soil disturbance and allows shallow •• Cast Steel Sweep Cast Steel Chisel Point Point Sweep • Unique Conical Coulter Blade enters the soil Chisel parallel to the direction of • travel 22 1/2 inch placement of nutrients. placement ofSwivel-mounted nutrients. inandaerobic zone. •• Hi Chrome Cast Hidepth Chrome Cast Tip Tip for maximum gallons exits moving soil laterally resulting in maximum penetration •• New point hard - 8” Low R •• Hard sweeps New chisel chisel point sweep sweep penetrates hard soil. soil. per acre. Does notpenetrates create excessive side load on mounting or tank. Hard surfaced surfaced sweeps tip is by the tip. •• 3” Chrome tip Heavier is supported supported by the steel steel casting casting tip. 3” O.D. O.D. slurry slurry tube tube •Chrome Coulter Spring • New Individual depth adjustment - 8” Hi Rate •• Separately Separately replaceable replaceable sweeps sweeps and and tubes tubes •• Provides for maximum nutrient uptake Provides for maximum nutrient uptake Option to run Coulters deeper behind tank tires in•• muddy conditions 22 heavy 22 1/2 1/2 inch inch heavy duty duty spring spring coulter coulter - 12” Hi Ra •inin• aerobic Large 22 1/2” coulters to slice through zone. aerobic zone. -- 8” 8” Low Low Rate Rate Sweeps Sweeps • Designed for speeds up to 8 MPH •• New Heavier Spring heavy residue. New Heavier Coulter Coulter Spring -- 8” Hi Sweeps 8”Point Hi Rate Rate Sweeps • Available 8” Low Rate, 8” Hi Rate, or 12” Hi Rate Chisel Sweeps depending on your desired •• Large 22 coulters -- 12” Largegallons 22 1/2” 1/2”per coulters to slice slice through through 12” Hi Hi Rate Rate Sweeps Sweeps acre. to heavy heavy residue. residue. • Wing drop or 3”, 3-1/2”, or 4” OD Tube available on all Chisel Point Sweeps •• Convenient Convenient –– no no tools tools required required –– wire wire pin pin Patents •• 6973884 US Patents 5865131 6973884 • 4” Rotary Injection Discharge Tube & Bracket for use withUS 2-1/2” & 3”5865131 hoses adjust colters. adjust colters. Other Other Patents Patents Pending Pending
• Convenient – no tools required – wire pin adjust colters.
DSI, Inc.
DSI, Inc.
417 417 State State Highway Highway 117 117 Goodfield, IL Goodfield, IL Ph. Ph. 309 309 965-5110 965-5110
Mailing Mailing Address: Address: 250 County 250 County Rd. Rd. 1425E 1425E Goodfield, Goodfield, IL IL 61742 61742
417 State Highway 117
US Pa
01/08/14
www.dsiag.com
Mailing Address:
DIETRICH SLURRY CLOZR MSD Auto Reset Slurry Injector
Patents Pending
Designed to be used continuously as part of the Dietrich Dietrich Conical Blade Rotary/Sweep Injection System or as desired Series with the Cast Dietrich 8 Inch Optional Steel AR Slurry Sweep Injector
70
Chisel Point Sweep
New
• Designed for Minimum Soil Disturbance at higher speeds. • Sweep bolts to 1-1/4” x 2” edge bent alloy shank.
Specifica
• Attaches to • 1/2” thick chisel point sweep shank combined • Auto reset w with 62 degree swept back wings results in 88 Inch Inch Optional Optional Cast Cast Steel Steel • 1-1/4” x 2” Chisel Point Sweep Chisel Point Sweep soil disturbance and allows shallow minimum * Shown with spherical notched blades and * Shown with spherical notched blades • Cast Steel C New Chisel Point Sweep 4” Rotary Injection Discharge Tube & Bracket and 8” Hi Rate Chisel Sweep & 3” Tube New Chisel Point Sweep placement of nutrients. •• Designed Designed for for Minimum Minimum Soil Soil Disturbance Disturbance • Hi Chrome at higher speeds. Specifications at higher speeds. Specifications • New chisel point sweep penetrates hard soil. • Hard surfac •• Sweep Sweep bolts bolts to to 1-1/4” 1-1/4” xx 2” 2” edge edge bent bent alloy alloy shank. shank. ••steel Attaches to tool Chrome tiptosweep isshank supported by the casting Attaches to 4” 4” xx 6” 6” tip. tool bar bar • 3” O.D. slur •• 1/2” chisel shank • Clamps forcombined improved residue flow 1/2” thick thick chisel point point sweep shank combined •• Auto reset with 1400# reset force Auto reset with 1400# reset force with with 62 62 degree degree swept swept back back wings wings results results in in 1-1/4” • Shank Separately r 1-1/4” xx 2” 2” edge edge bent bent 5160 5160 Alloy Alloy Steel Steel Shank soil disturbance and allows • Vertically adjustable •minimum Provides for maximum nutrient •••uptake minimum soil disturbance and allows shallow shallow • Cast Cast Steel Steel Chisel Chisel Point Point Sweep Sweep placement of nutrients. • 22 1/2 inch placement of nutrients. • Hi Chrome Cast Tip in• aerobic zone. • Hi Chrome Cast Tip Larger spindle than anhydrous ammonia sealers •• New •• Hard New chisel chisel point point sweep sweep penetrates penetrates hard hard soil. soil. - 8” Low R Hard surfaced surfaced sweeps sweeps Chrome tip is supported by the steel casting tip. • 3” O.D. slurry tube • Square holes for carriage bolts to prevent rounding when adjusting is supported by the steel casting tip. • 3” O.D. slurry tube •Chrome Newtip Heavier Coulter Spring • • Separately Separately replaceable replaceable sweeps sweeps and and tubes tubes- 8” Hi Rate •• Provides for maximum nutrient uptake Provides for maximum nutrient uptake • High for durability •• 22 22 1/2 1/2 inch inch heavy heavy duty duty spring spring coulter coulter - 12” Hi Ra zone. •inin aerobic Large 22tensile 1/2” steel coulters to slice through aerobic zone. -- 8” Low Rate Sweeps 8” Low Rate Sweeps • Choice ofSpring 18” spherical or new flat notched blades •• New Heavier Coulter -- 8” Newheavy Heavier Coulter Spring residue. 8” Hi Hi Rate Rate Sweeps Sweeps •• Large 1/2” coulters -- 12” Large 22 1/2” coulters to to slice slice through 12” Hi Hi Rate Rate Sweeps Sweeps • 22 Substantial rockthrough clearance heavy residue. heavy residue. • Grease zerks for rust prevention when notUSinPatents use 5865131 • 6973884 •• Convenient Convenient –– no no tools tools required required –– wire wire pin pin US Patents 5865131 • 6973884 adjust adjust colters. colters. Other Patents Other Patents Pending Pending
• Convenient – no tools required – wire pin adjust colters.
DSI, Inc.
DSI, Inc.
417 417 State State Highway Highway 117 117 Goodfield, Goodfield, IL IL Ph. Ph. 309 309 965-5110 965-5110
Mailing Mailing Address: Address: 250 250 County County Rd. Rd. 1425E 1425E Goodfield, IL 61742 Goodfield, IL 61742
417 State Highway 117
US Pa 01/08/14
www.dsiag.com
Mailing Address:
Dietrich Series 70 Chisel Point Sweeps
Dietrich Series 70 Chisel Point Sweeps 8” LOW RATE SWEEP
• Shown with standard 3” tube • 8” wing width •
Designed for hi speed (5 – 8 mph) and lower rates (2,500 – 5,000 gallons per acre) to meet the E.P.A. Phosphorus Rules.
• Lifts the soil less than 1” • Vertical shank portion is 1/2” thick • The 8” Low Rate Sweep moves less soil, allowing higher speeds at low rates.
12” HI RATE SWEEP
8” HI RATE SWEEP
• Shown with optional 3-1/2” tube and clip (2-1/2” hose fits inside)
• Shown with optional 4” tube and clip (3” hose fits inside)
• 8” wing width
• 12” wing width
• Designed for higher rates (5,000 – 10,000 gallons per acre)
• Designed for higher rates (10,000 – 15,000 plus gallons per acre; 20,000 gal. optional)
• Lifts the soil less than 1-1/4”
• Lifts the soil less than 1-1/4”
•
Vertical portion is 1” thick at the lower rear to create a wider slot to facilitate the filling of the soil cavity created by the wings.
•
Vertical portion is 1” thick at the lower rear to create a wider slot to facilitate the filling of the soil cavity created by the wings.
•
The 8” hi rate sweep parts the soil more and creates a larger soil cavity than the 8” low rate sweep to contain the liquid.
•
The 12” hi rate sweep parts the soil more and creates a larger soil cavity than the 8” hi rate sweep to contain the liquid.
Design Features (Series 70 Sweeps) • Series 70 Chisel Point Sweeps are designed to penetrate frozen soil. • 1/2” thick Chisel Point Sweep shank combined with 62 degree swept back wings results in minimum soil disturbance and allows shallow placement of nutrients. • The sweeps are designed with thin Vertical Portion Hi Carbon steel to minimize soil disturbance at high speeds. • To prevent breakage, the sweeps are attached to a 1-1/4” X 2” edge bent alloy steel shank to allow side movements when striking rocks. • Standard 3” or optional 3-1/2” & 4” OD tubes with clip available on all sweep sizes.
US Patents 5865131
6973884
8544395
Other Patents Pending
Wing Drop Tube • Option for sweep injecting
• Fits both
2-1/2” & 3” Hoses
• Enhanced
plug-free performance 01/08/14
