Duplo EX2000 Installation
Duplo Express Sealer EX-2000
Installation Manual
Provided By
http://www.MyBinding.com
http://www.MyBindingBlog.com
Installation Instructions Ver.1
To ensure safe operation of the machine, the DUBINDER must be installed correctly. Read these instructions carefully before installing the unit.
WARNING ¡Use only the power cord that is provided among the accessories. Insert the power cord plug firmly into the socket, so that proper electrical contact is effected. aUse of any other power cord could result in imperfect grounding. If grounding is imperfect and electrical leakage occurs, fire or electric shock could result. ¡Do not place the machine in a humid or dusty area. It may cause a fire or electric shock.
CAUTION ¡Place the machine on a level surface. ¡Do not install the machine in a place exposed to direct sunlight or near heating equipment. ¡Do not use the machine in a place exposed to extremely high/low temperatures or strong vibration. ¡Do not plug the machine into an outlet with noise-generating equipment such as refrigerators and large-scale office equipment.
0. Machine dimensions 310 ( Sealer )
465 ( Sealer ) 703
288 ( Folder )
300
451 ( Folder )
¡Machine dimensions
625 750
( mm )
1. Unpacking Checks
Q4111
Unpacking Checks. 1
q Packages for 1 complete EXPRESS SEALER:
¡Packaged items
• 1 binder unit package ( product name: EX-2000 )
w
Unpack the various packages. IMPORTANT : Carry out unpacking in a place
that is safe for the work.
e
Contents checks for each package. No.
Item
Q'ty
q Folder
1
w Sealer
1
e Installation instructions
1
r Inspection tag
1
t Instruction manual
1
y Quarity control sheet
1
u Warranty form
1
i Power supply cord
1
o Support tray
1
!0 Folding tray 1
1
!1 Folding tray 2
1
!2 Turn guide
1
!3 Safety cover
1
!4 Stacker guides
2
!5 Stacker stopper
1
!6 Handle
1
!7 Screw (for fixing folder and sealer)
2
!1
!2
!0
!5
!3 !4
!6
!7 Q4112e
-2-
2. Assembly
Assembly. 2
q Install the sealer and peel off the tape. w Place the folder in the direction shown in the
y Insert the protrusion of the connector cover into the hole to mount with the screw removed in step r.
figure and peel off the tape.
Screw r
Folder
Connector cover Hole
Sealer
Q4105
Q4101
e Remove the screw to detach the connector cover.
u Insert the folding tray 1 to the pin.
Screw Folding tray 1 Pins
Connector cover Q4102
r Fit the eject roller (folder side) into the transport section (sealer side) and fix the sealer and folder with 2 screws. Screw
Eject roller
Q4106
i Insert the folding tray 2 to the pin.
Folder
Transport section
Folding tray 2
Screw
Pins
Sealer
Q4107
Q4103
t Connect the connectors of connection
o Mount the support tray.
cables as shown in the figure. Support tray
Connectors
Connector
Connector Q4104
Q4108
-3-
3. Power Switch ON
Assembly. 2
!0 Insert the shafts (on both sides of the safety
q Connect the plug of the “supplied power
cover) into the grooves.
supply cord ” to the “inlet” securely. DB-50 side
Safety cover
Female plug of the power supply cord Groove
Shaft
Inlet Q4109
!1 Open the stacker to mount the stacker
Q4A07
w Connect the other plug of the “supplied
guides and stacker stopper.
power supply cord ” to the “outlet” securely. Outlet
Stacker guides Stacker stopper
Male plug of the power supply cord
Outlet
Stacker
Q4A08
Q4110
WARNING ¡Power source: AC 115 V, 60 Hz ¡Plug the power supply cord into an outlet securely to prevent contact failure. ¡ Do not step on or press the power supply cord. It may cause accidents.
e Press the “ I ” side on the “power switch”.
Power switch: I side Q4A03
r Check the LCD display of the control panel. • The control panel must display normally. -4-
Q4-Y1050 2004.05
Installation Manual
Provided By
http://www.MyBinding.com
http://www.MyBindingBlog.com
Installation Instructions Ver.1
To ensure safe operation of the machine, the DUBINDER must be installed correctly. Read these instructions carefully before installing the unit.
WARNING ¡Use only the power cord that is provided among the accessories. Insert the power cord plug firmly into the socket, so that proper electrical contact is effected. aUse of any other power cord could result in imperfect grounding. If grounding is imperfect and electrical leakage occurs, fire or electric shock could result. ¡Do not place the machine in a humid or dusty area. It may cause a fire or electric shock.
CAUTION ¡Place the machine on a level surface. ¡Do not install the machine in a place exposed to direct sunlight or near heating equipment. ¡Do not use the machine in a place exposed to extremely high/low temperatures or strong vibration. ¡Do not plug the machine into an outlet with noise-generating equipment such as refrigerators and large-scale office equipment.
0. Machine dimensions 310 ( Sealer )
465 ( Sealer ) 703
288 ( Folder )
300
451 ( Folder )
¡Machine dimensions
625 750
( mm )
1. Unpacking Checks
Q4111
Unpacking Checks. 1
q Packages for 1 complete EXPRESS SEALER:
¡Packaged items
• 1 binder unit package ( product name: EX-2000 )
w
Unpack the various packages. IMPORTANT : Carry out unpacking in a place
that is safe for the work.
e
Contents checks for each package. No.
Item
Q'ty
q Folder
1
w Sealer
1
e Installation instructions
1
r Inspection tag
1
t Instruction manual
1
y Quarity control sheet
1
u Warranty form
1
i Power supply cord
1
o Support tray
1
!0 Folding tray 1
1
!1 Folding tray 2
1
!2 Turn guide
1
!3 Safety cover
1
!4 Stacker guides
2
!5 Stacker stopper
1
!6 Handle
1
!7 Screw (for fixing folder and sealer)
2
!1
!2
!0
!5
!3 !4
!6
!7 Q4112e
-2-
2. Assembly
Assembly. 2
q Install the sealer and peel off the tape. w Place the folder in the direction shown in the
y Insert the protrusion of the connector cover into the hole to mount with the screw removed in step r.
figure and peel off the tape.
Screw r
Folder
Connector cover Hole
Sealer
Q4105
Q4101
e Remove the screw to detach the connector cover.
u Insert the folding tray 1 to the pin.
Screw Folding tray 1 Pins
Connector cover Q4102
r Fit the eject roller (folder side) into the transport section (sealer side) and fix the sealer and folder with 2 screws. Screw
Eject roller
Q4106
i Insert the folding tray 2 to the pin.
Folder
Transport section
Folding tray 2
Screw
Pins
Sealer
Q4107
Q4103
t Connect the connectors of connection
o Mount the support tray.
cables as shown in the figure. Support tray
Connectors
Connector
Connector Q4104
Q4108
-3-
3. Power Switch ON
Assembly. 2
!0 Insert the shafts (on both sides of the safety
q Connect the plug of the “supplied power
cover) into the grooves.
supply cord ” to the “inlet” securely. DB-50 side
Safety cover
Female plug of the power supply cord Groove
Shaft
Inlet Q4109
!1 Open the stacker to mount the stacker
Q4A07
w Connect the other plug of the “supplied
guides and stacker stopper.
power supply cord ” to the “outlet” securely. Outlet
Stacker guides Stacker stopper
Male plug of the power supply cord
Outlet
Stacker
Q4A08
Q4110
WARNING ¡Power source: AC 115 V, 60 Hz ¡Plug the power supply cord into an outlet securely to prevent contact failure. ¡ Do not step on or press the power supply cord. It may cause accidents.
e Press the “ I ” side on the “power switch”.
Power switch: I side Q4A03
r Check the LCD display of the control panel. • The control panel must display normally. -4-
Q4-Y1050 2004.05
