ecr elr 17256 assembly
Parts List San Diego, CA 92110 USA www.ecr4kids.com
BEFORE ASSEMBLING, MAKE SURE YOU HAVE ALL THE PARTS Left &Right Left & Right F
A
Side Dividers (1/1)
Side Panels (1/1)
Organize and Play Storage Cabinet Model# ELR-17256
A1
WARNING:
A2
F1
F2
B
Top Panel (1) G
Shelf Bar(6)
C
Anchor Bar (1) H
Back Panel (3)
D
Middle Shelf (2) I
Hex Screws (34)
Adult Assembly Required. Two adults recommended. - Contains small parts, sharp points and edges. - Do not stand, sit, kneel, climb, lean or pull on unit for support. - Never leave children unattended. - Do not place unit near high heat or moisture. - Adult supervision recommended. Children climbing on furniture can lead to death or serious injury due to tipping secure unit to wall using appropriate hardware
TOOLS INCLUDED Hex Tool (1)
TOOLS NEEDED Phillips Screwdriver
Use the Hex Tool
Cam Posts & Cam Locks (4/4)
J E
Bottom Shelf (1)
Drill Driver + Drill Bits
J1
J2 Use a Phillips Screwdriver
K
Batch ID Sticker located on underside
Wall Mount (1)
Must be drilled to mount to wall per individual installation application
1
Install Shelves to the Dividers
Align the slits on the Left and RIght Dividers (F) with the slits on Middle Shelves (D) as shown and slide together until seated. Place two Cam Locks (J2) into the recessed holes on the Left & Right Dividers (F), with the arrow facing the closest edge.
3
Connect Lower Shelf to Lower DIviders
Place three Cam Locks (J2) into the recessed holes on the Anchor Bar (C). Install three Cam Posts (J1) into the threaded plastic inserts on the underside of Top Panel (B) with a Phillips screwdriver. Reminder: Do not overtighten, as the plastic threads can be stripped. Insert the Top Shelf (B) Cam Posts into the holes on the top edge of the Anchor Bar (C). Turn the Cam Locks (J2) clockwise with a Phillips screwdriver to lock the Anchor Bar (C) onto the posts.
Note: Each divider side with six holes should face outward.
Install Bottom Shelf to Dividers
Install the Bottom Shelf (E) on to the Left and Right Dividers (F) with four Hex Screws (I) using the Hex Tool. Tip: Groove for back panels should align with shelves.
4
Connect Top Panel to Upper Dividers
Install four Cam Posts (J1) into the threaded plastic inserts on the underside of Top Panel (B) with a Phillips screwdriver. Reminder: Do not overtighten, as the plastic threads can be stripped. Insert the Top Panel (B) Cam Posts into the holes on the top edge of the Left & Right Dividers (F).
ght pri
Turn the Cam Locks (J2) clockwise with a Phillips screwdriver to lock the Left & Right Dividers (F) onto the posts. lly Rotate U efu
Ca r
2
Two Adults Recommended: Carefully rotate unit upright.
See Next Page
5
Install Shelf Bars
Align pre-installed dowels on six Shelf Bars (G) with holes on Left & Right Dividers (F) and push into place. Secure in place with six Hex Screws (I) using the hex tool.
7
Insert the Back Panels
Slide the Back Panels (H) into the grooves on the Top Panel (B), Middle Shelves (D) & Bottom Shelf (E) as shown, until fully seated into the groove on the inside of the Left Side Panel (A1). Tip: If the Back Panels do not slide in easily, wiggle the panels while pushing into place.
6
Install Left Side Panel
Install the Left Side Panel (A1) on to the Top Panel and anchor Bar (B,C), Middle Shelves and Shelf Bars (D,G) & Bottom Shelf (E) with thirteen Hex Screws (I) using the Hex Tool.
8
Install Right Side Panel
Install the Right Side Panel (A2) on to the Top Panel and anchor Bar (B,C), Middle Shelves and Shelf Bars (D,G) & Bottom Shelf (E) with thirteen Hex Screws (I) using the Hex Tool.
9
Install the Wall Mount
Consult a professional Handyman, Carpenter or Maintenance person to install the wall mount. They can determine suitable wall mounting hardware, available from your local home improvement store, for your particular application. The Wall Mount (K) should be secured in a minimum of two locations, preferably into wall studs. We appreciate your purchase of the Organize and Play Storage Cabinet. ECR4KIDS has made every effort to supply a quality product that with proper use and care, will provide many years of trouble-free use. If you experience any difficulties with this product, please email us at [email protected] or call toll-free at (855) ECR-4KIDS (Monday - Friday, 7:00am - 4:00pm Pacific Standard Time) Please do not return to place of purchase as ECR4KIDS will replace defective part(s) and/or product. Warranty: Visit our website for product specific warranty information at: www.ecr4kids.com To prevent a tip-over tragedy: Buy and install low-cost anchoring devices that can prevent TVs, dressers, bookcases and other furniture from tipping. For more information please visit www.ecr4kids.com/resources
Care and Cleaning Clean wood with a damp cloth or sponge using warm water and mild soap. Wipe dry.
Record the manufacture date here. Information is located on the Batch ID sticker and on the shipping carton. Save this sheet in an accessible place.
Do not place near heat, moisture or vaporizer which may cause wood to warp and peel.
Model Number: ELR-17256
Check for loose or worn parts periodically and tighten or replace as necessary.
Manufacture Date:
©2016 ECR4KIDS, LP
Factory Code:
EP
Batch ID Number: ECR2016-1184 (Located on Part #)
Version: ELR-17256_2016.04.20
BEFORE ASSEMBLING, MAKE SURE YOU HAVE ALL THE PARTS Left &Right Left & Right F
A
Side Dividers (1/1)
Side Panels (1/1)
Organize and Play Storage Cabinet Model# ELR-17256
A1
WARNING:
A2
F1
F2
B
Top Panel (1) G
Shelf Bar(6)
C
Anchor Bar (1) H
Back Panel (3)
D
Middle Shelf (2) I
Hex Screws (34)
Adult Assembly Required. Two adults recommended. - Contains small parts, sharp points and edges. - Do not stand, sit, kneel, climb, lean or pull on unit for support. - Never leave children unattended. - Do not place unit near high heat or moisture. - Adult supervision recommended. Children climbing on furniture can lead to death or serious injury due to tipping secure unit to wall using appropriate hardware
TOOLS INCLUDED Hex Tool (1)
TOOLS NEEDED Phillips Screwdriver
Use the Hex Tool
Cam Posts & Cam Locks (4/4)
J E
Bottom Shelf (1)
Drill Driver + Drill Bits
J1
J2 Use a Phillips Screwdriver
K
Batch ID Sticker located on underside
Wall Mount (1)
Must be drilled to mount to wall per individual installation application
1
Install Shelves to the Dividers
Align the slits on the Left and RIght Dividers (F) with the slits on Middle Shelves (D) as shown and slide together until seated. Place two Cam Locks (J2) into the recessed holes on the Left & Right Dividers (F), with the arrow facing the closest edge.
3
Connect Lower Shelf to Lower DIviders
Place three Cam Locks (J2) into the recessed holes on the Anchor Bar (C). Install three Cam Posts (J1) into the threaded plastic inserts on the underside of Top Panel (B) with a Phillips screwdriver. Reminder: Do not overtighten, as the plastic threads can be stripped. Insert the Top Shelf (B) Cam Posts into the holes on the top edge of the Anchor Bar (C). Turn the Cam Locks (J2) clockwise with a Phillips screwdriver to lock the Anchor Bar (C) onto the posts.
Note: Each divider side with six holes should face outward.
Install Bottom Shelf to Dividers
Install the Bottom Shelf (E) on to the Left and Right Dividers (F) with four Hex Screws (I) using the Hex Tool. Tip: Groove for back panels should align with shelves.
4
Connect Top Panel to Upper Dividers
Install four Cam Posts (J1) into the threaded plastic inserts on the underside of Top Panel (B) with a Phillips screwdriver. Reminder: Do not overtighten, as the plastic threads can be stripped. Insert the Top Panel (B) Cam Posts into the holes on the top edge of the Left & Right Dividers (F).
ght pri
Turn the Cam Locks (J2) clockwise with a Phillips screwdriver to lock the Left & Right Dividers (F) onto the posts. lly Rotate U efu
Ca r
2
Two Adults Recommended: Carefully rotate unit upright.
See Next Page
5
Install Shelf Bars
Align pre-installed dowels on six Shelf Bars (G) with holes on Left & Right Dividers (F) and push into place. Secure in place with six Hex Screws (I) using the hex tool.
7
Insert the Back Panels
Slide the Back Panels (H) into the grooves on the Top Panel (B), Middle Shelves (D) & Bottom Shelf (E) as shown, until fully seated into the groove on the inside of the Left Side Panel (A1). Tip: If the Back Panels do not slide in easily, wiggle the panels while pushing into place.
6
Install Left Side Panel
Install the Left Side Panel (A1) on to the Top Panel and anchor Bar (B,C), Middle Shelves and Shelf Bars (D,G) & Bottom Shelf (E) with thirteen Hex Screws (I) using the Hex Tool.
8
Install Right Side Panel
Install the Right Side Panel (A2) on to the Top Panel and anchor Bar (B,C), Middle Shelves and Shelf Bars (D,G) & Bottom Shelf (E) with thirteen Hex Screws (I) using the Hex Tool.
9
Install the Wall Mount
Consult a professional Handyman, Carpenter or Maintenance person to install the wall mount. They can determine suitable wall mounting hardware, available from your local home improvement store, for your particular application. The Wall Mount (K) should be secured in a minimum of two locations, preferably into wall studs. We appreciate your purchase of the Organize and Play Storage Cabinet. ECR4KIDS has made every effort to supply a quality product that with proper use and care, will provide many years of trouble-free use. If you experience any difficulties with this product, please email us at [email protected] or call toll-free at (855) ECR-4KIDS (Monday - Friday, 7:00am - 4:00pm Pacific Standard Time) Please do not return to place of purchase as ECR4KIDS will replace defective part(s) and/or product. Warranty: Visit our website for product specific warranty information at: www.ecr4kids.com To prevent a tip-over tragedy: Buy and install low-cost anchoring devices that can prevent TVs, dressers, bookcases and other furniture from tipping. For more information please visit www.ecr4kids.com/resources
Care and Cleaning Clean wood with a damp cloth or sponge using warm water and mild soap. Wipe dry.
Record the manufacture date here. Information is located on the Batch ID sticker and on the shipping carton. Save this sheet in an accessible place.
Do not place near heat, moisture or vaporizer which may cause wood to warp and peel.
Model Number: ELR-17256
Check for loose or worn parts periodically and tighten or replace as necessary.
Manufacture Date:
©2016 ECR4KIDS, LP
Factory Code:
EP
Batch ID Number: ECR2016-1184 (Located on Part #)
Version: ELR-17256_2016.04.20
