ELA RTT
Catalog Number Notes
FEATURES & SPECIFICATIONS
Type
INTENDED USE
Hand-held Indura® remote test transmitter used to initiate a 30-second test for emergency lighting equipment that has been ordered with the remote test receiver (RT option).
Unit Accessories
CONSTRUCTION
ELA RTT
Constructed of lightweight polycarbonate. 3" long, 1.75" wide, .775" deep. Operation: Pressing the remote transmitter button activates a 30-second test from up to 35 feet away on each unit equipped with the remote test receiver (RT option). Utilizes radio frequency technology of 315MHZ, which minimizes interference of obstructions that can sometimes be experienced with infrared technology.
Remote Test Transmitter
Eliminates crucial time spent climbing ladders or riding lifts. Ideal for high mounting heights or applications where accessibility to fixture is limited, making performance of a monthly 30-second test required by the Life Safety Code labor intensive. A minimum of one per job location is required for units ordered with the remote test receiver (RT option) FCC compliant. Battery: Utilizes A23 alkaline 12-volt battery with an expected 60 hours of service at 70°F. Note: Specifications subject to change without notice. Actual performance may differ as a result of end-user environment and application. Specifications Shipping Weight : 1 lb (0.45 kg)
ORDERING INFORMATION
Lead times will vary depending on options selected. Consult with your sales representative.
Example: ELA RTT
ELA RTT Series ELA RTT
Remote test transmitter
EMERGENCY
ELA-RTT-BS
ELA RTT-BS Unit Accessories Catalog Number Notes
FEATURES & SPECIFICATIONS
Type
INTENDED USE
Mounting accessory banding strap to clamp Indura® mounting bracket to poles, columns or I-beams.
Unit Accessories
CONSTRUCTION Contains one 1/2" wide, 8-1/2' long, 100% stainless steel band. Includes three fasteners and one extender to make up a total of three worm-drive clamps. INSTALLATION To determine lengths to cut, multiply diameter in inches by p (3.1416), minus 4.5" for the adjustable fastener end, or determine circumference by measurement, minus 4.5" for the adjustable fastener end.
ELA BS
Note: Specifications subject to change without notice.
Banding Strap
Actual performance may differ as a result of end-user environment and application.
1/2" wide stainless steel banding
1/2" wide stainless steel fastener and housing assemblies
5/16" stainless steel attached hex-head screw
Specifications Shipping Weight : 1 lb (0.45 kg)
ORDERING INFORMATION
Lead times will vary depending on options selected. Consult with your sales representative.
Example: ELA BS
ELA BS Series ELA BS Banding strap
ELA-RTT-BS-
EMERGENCY One Lithonia Way Conyers, GA 30012
Phone: 800-334-8694
Fax: 770-981-8141 www.lithonia.com
©2000-2012 Acuity Brands Lighting, Inc. All rights reserved.
Rev. 08/23/12
FEATURES & SPECIFICATIONS
Type
INTENDED USE
Hand-held Indura® remote test transmitter used to initiate a 30-second test for emergency lighting equipment that has been ordered with the remote test receiver (RT option).
Unit Accessories
CONSTRUCTION
ELA RTT
Constructed of lightweight polycarbonate. 3" long, 1.75" wide, .775" deep. Operation: Pressing the remote transmitter button activates a 30-second test from up to 35 feet away on each unit equipped with the remote test receiver (RT option). Utilizes radio frequency technology of 315MHZ, which minimizes interference of obstructions that can sometimes be experienced with infrared technology.
Remote Test Transmitter
Eliminates crucial time spent climbing ladders or riding lifts. Ideal for high mounting heights or applications where accessibility to fixture is limited, making performance of a monthly 30-second test required by the Life Safety Code labor intensive. A minimum of one per job location is required for units ordered with the remote test receiver (RT option) FCC compliant. Battery: Utilizes A23 alkaline 12-volt battery with an expected 60 hours of service at 70°F. Note: Specifications subject to change without notice. Actual performance may differ as a result of end-user environment and application. Specifications Shipping Weight : 1 lb (0.45 kg)
ORDERING INFORMATION
Lead times will vary depending on options selected. Consult with your sales representative.
Example: ELA RTT
ELA RTT Series ELA RTT
Remote test transmitter
EMERGENCY
ELA-RTT-BS
ELA RTT-BS Unit Accessories Catalog Number Notes
FEATURES & SPECIFICATIONS
Type
INTENDED USE
Mounting accessory banding strap to clamp Indura® mounting bracket to poles, columns or I-beams.
Unit Accessories
CONSTRUCTION Contains one 1/2" wide, 8-1/2' long, 100% stainless steel band. Includes three fasteners and one extender to make up a total of three worm-drive clamps. INSTALLATION To determine lengths to cut, multiply diameter in inches by p (3.1416), minus 4.5" for the adjustable fastener end, or determine circumference by measurement, minus 4.5" for the adjustable fastener end.
ELA BS
Note: Specifications subject to change without notice.
Banding Strap
Actual performance may differ as a result of end-user environment and application.
1/2" wide stainless steel banding
1/2" wide stainless steel fastener and housing assemblies
5/16" stainless steel attached hex-head screw
Specifications Shipping Weight : 1 lb (0.45 kg)
ORDERING INFORMATION
Lead times will vary depending on options selected. Consult with your sales representative.
Example: ELA BS
ELA BS Series ELA BS Banding strap
ELA-RTT-BS-
EMERGENCY One Lithonia Way Conyers, GA 30012
Phone: 800-334-8694
Fax: 770-981-8141 www.lithonia.com
©2000-2012 Acuity Brands Lighting, Inc. All rights reserved.
Rev. 08/23/12
