Electric cylinders ESBF, with spindle drive - Festo
Electric cylinders ESBF, with spindle drive
q/w
Festo core product range Covers 80% of your automation tasks
Worldwide: Superb: Easy:
Always in stock Festo quality at an attractive price Reduces procurement and storing complexity
qReady for dispatch from the Festo factory in 24 hours Held in stock in 13 service centres worldwide More than 2200 products wReady for dispatch in 5 days maximum from stock Assembled for you in 4 service centres worldwide Up to 6 x 1012 variants per product series
Look for the star!
Electric cylinders ESBF, with spindle drive Key features At a glance The electric cylinder ESBF is a mech anical linear drive unit with piston rod. The driving component consists of an electrically actuated spindle that converts the rotary motion of the motor into a linear motion of the piston rod.
The electric cylinder is based on the ISO 15552 standard. The mechanical interfaces are largely compatible with the standards-based cylinder DSBF.
Two spindle types to choose from: Size 32 … 50: – Ball screw (BS) – Lead screw (LS) Size 63 … 100: – Ball screw (BS)
Complete system consisting of electric cylinder, motor and motor mounting kit Electric cylinder
Options: High corrosion protection Degree of protection IP65 Piston rod extension NSF-H1 lubricant for food & beverage applications Wide range of accessories
è page 4
è page 25
Motor
-H-
Note
A range of specially adapted complete solutions is available for the electric cylinder ESBF and the motors. Motor mounting kit Axial kit
è page 25 Parallel kit Complete kits are available for both parallel and axial motor mounting.
è page 38
Protective bellows kit EADB for use in dusty environments The protective bellows kit is a leakfree system. To prevent unwanted media from being drawn in, the supply and exhaust air for the kit must be ducted via a pressure compensation hole in the connection part 1. The kit protects the piston rod, seal
1
2
è Internet: www.festo.com/catalogue/...
and bearings against a wide variety of media, for example: Dust Chippings Oil Grease Petrol
Subject to change – 2017/03
Electric cylinders ESBF, with spindle drive Features and type codes è page 24
Degree of protection IP65 (feature S1) for use in wet environments The electric cylinder to IP65 fulfils the specifications to IEC 60 529. Air is exchanged between the interior of the cylinder and the environment via a pressure compensation hole 1. This prevents negative pressure or excess pressure arising in the interior of the cylinder.
1
It also prevents unwanted media being drawn in. Sealing air can also be applied to the pressure compensation hole if needed (e.g. during a cleaning process).
NSF-H1 lubricant for food & beverage applications (feature F1) The electric cylinder is of limited suitability for the food industry. Can only be selected in combination with the ball screw (BS) drive system.
NSF-H1 lubricant for piston rod, screw spindle and other parts.
Further information on materials www.festo.com/sp è technical hotline
Type codes ESBF
—
BS
—
63
—
100
—
5P
—
F
Type ESBF
Electric cylinder
Drive system BS LS
Ball screw Lead screw
Size Stroke [mm] Spindle pitch [mm/rev] Variant F S1 R3 F1 …E
Female thread Degree of protection IP65 High corrosion protection Suitable for use in the food industry as per extended information on materials Piston rod extension
2017/03 – Subject to change
è Internet: www.festo.com/catalogue/...
3
Electric cylinders ESBF, with spindle drive Peripherals overview
1 8
2
aJ 9
3
aA
4
7 5
9 aB
6
bD
bD
bF
bE
bH
7
cJ bI
bG
8
aF bB
aG aH
aI
aC
bC
bJ aD bA
aA
-H-
Note
The maximum load carrying ability of the mounting parts must be greater than the maximum occurring load. The weight of the cylinder including the motor must be factored in. aE Mounting components and accessories Description 1 2 3 4 5
1)
4
Swivel flange DAMS Foot mounting HNC/CRHNC Trunnion flange ZNCF/CRZNG Swivel flange SNC Swivel flange SNCS/CRSNCS/SNCS-…-R3
With parallel motor mounting, for spherical bearing For mounting the cylinder. The foot mounting can only be secured at the rear, on the parallel kit For spherical bearing With parallel motor mounting With parallel motor mounting
Suitable for high forces1) n – – – –
è Page/Internet 49 44 46 50 51
Shows which accessories can be used within the entire force range. For restricted force ranges see the relevant accessory part, from page 44.
è Internet: www.festo.com/catalogue/...
Subject to change – 2017/03
Electric cylinders ESBF, with spindle drive Peripherals overview Mounting components and accessories Description 6 7 8 9 aJ aA aB aC aD aE aF
aG aH aI bJ bA bB bC
bD bE bF bG bH bI cJ
1)
Swivel flange SNCL Swivel flange SNCB/SNCB-…-R3 Trunnion support LNZG/CRLNZG Clevis foot LSNG Clevis foot LSNSG Clevis foot LBG/LBG-…-R3 Clevis foot LNG/CRLNG Right-angle clevis foot LQG Rod clevis SGA Guide unit EAGF Protective bellows kit EADB
Rod eye SGS/CRSGS Coupling piece KSZ Rod clevis SG/CRSG Self-aligning rod coupler FK/CRFK Flange mounting EAHH Trunnion mounting kit DAMT Profile mounting EAHF-…-P Proximity sensor SMT/CRSMT-8 Mounting kit CRSMB Sensor rail SAMH Blanking screw DAMD-PS Parallel kit EAMM-U Axial kit EAMM-A Mounting kit SMB-8-FENG
Suitable for high forces1)
With parallel motor mounting
–
With parallel motor mounting, for spherical bearing For cylinders with trunnion mounting
– –
With parallel motor mounting, with spherical bearing With parallel motor mounting, weld-on, with spherical bearing With parallel motor mounting, for spherical bearing With parallel motor mounting
– – – –
For rod eye SGS
–
è Page/Internet 52 53 47 55 55 55 55 55
For swivel mounting of cylinders
n
56
– For protecting electric cylinders against rotation at high torque loads – Cannot be used in combination with protective bellows kit EADB – Protects the cylinder (piston rod, seal and bearings) against a wide range of media and thus prevents premature wear – The kit can only be used in combination with an extended piston rod (…E) With spherical bearing
n
57
To compensate for radial deviations
38 n
n –
Permits a swivel motion of the cylinder in one plane For compensating radial and angular misalignments
n –
56 56 56 56
– On the bearing cap – Cannot be used in combination with protective bellows kit EADB For mounting anywhere along the cylinder profile barrel. Cannot be mounted in the vicinity of the motor with parallel motor mounting – For mounting the electric cylinder via the profile – Cannot be mounted in combination with the parallel kit EAMM-U with some combinations (in the vicinity of the motor) For position sensing
n
n
59
For proximity sensor with T-slot
n
58
For proximity sensor with T-slot
n
58
For covering unused mounting threads
n
59
For parallel motor mounting
n
34
For axial motor mounting
n
25
For proximity sensor with T-slot
n
58
–
45 54 43
n
Shows which accessories can be used within the entire force range. For restricted force ranges see the relevant accessory part, from page 44.
2017/03 – Subject to change
è Internet: www.festo.com/catalogue/...
5
Electric cylinders ESBF, with spindle drive Technical data
-N-
Function
-T-W-
Size 32 … 100 Stroke length 30 … 1500 mm www.festo.com
General technical data Size
32
Based on standard Design Piston rod thread Male thread Female thread Working stroke Protection against torsion/guide Duty cycle Position sensing Type of mounting Mounting position
[mm] [%]
32 [mm/rev] 5
Spindle diameter Max. force of the cylinder1) Max. driving torque Max. radial force2) Max. speed Max. rotational speed Max. acceleration Max. angle of rotation at the piston rod3) Reversing backlash3) Repetition accuracy No-load driving torque4)
[mm] [kN] [Nm] [N] [m/s] [rpm] [m/s2] [°] [mm] [mm] [Nm]
Size Spindle pitch
63 [mm/rev] 5
Spindle diameter Max. force of the cylinder1) Max. driving torque Max. radial force2) Max. speed Max. rotational speed Max. acceleration Max. angle of rotation at the piston rod3) Reversing backlash3) Repetition accuracy No-load driving torque4)
[mm] [kN] [Nm] [N] [m/s] [rpm] [m/s2] [°] [mm] [mm] [Nm]
6
50
M10x1.25 M12x1.25 M6 M8 30 … 800 30 … 800 With plain-bearing guide 100 For proximity sensor With female thread/accessories Any
Mechanical data – Ball screw Size Spindle pitch
1) 2) 3) 4)
40
63
ISO 15552 Electric cylinder with ball screw or lead screw
12 1 1.1 115 0.55 6600 5 ±0.25 0.03 ±0.01 0.1
25 7 7 700 0.27 3250 5 ±0.4 0.03 ±0.015 0.4
16 3 3 130 0.4 4800 5 ±0.2 0.03
1 2 1.1 6600 15 0.04
100
Electric cylinder with ball screw
M16x1.5 M10 30 … 1000
40 5
10
80
M16x1.5 M10 30 … 1200
M20x1.5 M12 30 … 1500
50 5
10
16
3 5.6
2.6 7.7
0.8 4800 15
1.2 4500 25
0.03
0.04
0.2
20 5 4.8 300 0.3 3600 5 ±0.15 0.03
M20x1.5 M12 30 … 1500
10
20
5 9.2
4.5 16.3
0.6 3600 15
1.2 3600 25
0.03
0.04
20
40
17 63.7
14.5 102.6
0.67 2010 15
1.34 2010 25
0.03
0.04
0.9
1.0
0.3 80 5
10
25
7 13.1
6 26.5
0.53 3220 15
1.35 3260 25
0.03 ±0.01 0.45
0.04
32 12 11.9 1100 0.21 2530 5 ±0.5 0.03
0.5
0.5
100 5
15
32
12 33.7
10 56.6
0.62 2515 15
1.34 2515 25
0.03
0.04
40 17 16.9 1100 0.16 2010 5 ±0.5 0.03
0.6
0.65
0.7
The pressure force is dependent on the stroke and has an effect on the service life è 10 On the drive shaft In new condition At a spindle speed of 200 rpm
è Internet: www.festo.com/catalogue/...
Subject to change – 2017/03
Electric cylinders ESBF, with spindle drive Technical data Mechanical data – Lead screw Size Spindle pitch
32 [mm/rev] 2.5
40 3
50 4
Spindle diameter Max. force of the cylinder1) Max. driving torque Max. radial force2) Max. speed Max. rotational speed Max. acceleration Max. angle of rotation at the piston rod Reversing backlash3) Repetition accuracy No-load driving torque4)
[mm] [kN] [Nm] [N] [m/s] [rpm] [m/s2] [°] [mm] [mm] [Nm]
16 1 2.4 130 0.05 1000 2.5 ±0.2 0.1
20 1.6 4.8 300 0.05 750 2.5 ±0.15 0.1
0.2
0.3
1) 2) 3) 4)
12 0.6 1.1 115 0.05 1200 2.5 ±0.25 0.1 ±0.05 0.1
Electric cylinder with lead screw can be operated with maximum force over the entire stroke range. On the drive shaft In new condition At a spindle speed of 200 rpm
Weight [g] – Ball screw Size
32
40
50
63
80
100
Basic weight m0 at 0 mm stroke Additional weight m10 per 10 mm stroke Moving mass mb0 at 0 mm stroke Moving mass mb10 per 10 mm stroke
781 33 281 9
1237 47 467 26
1982 65 793 35
3165 87 1831 52
7393 155 5300 103
11123 193 8786 132
Weight [g] – Lead screw Size
32
40
50
Basic weight m0 at 0 mm stroke Additional weight m10 per 10 mm stroke Moving mass mb0 at 0 mm stroke Moving mass mb10 per 10 mm stroke
667 34 198 9
1079 48 317 11
1716 67 532 13
Total weight mges.: mges. + m0 ) m10
Total moving mass mbges.: stroke 10
2017/03 – Subject to change
mbges. + mb0 ) mb10
stroke 10
è Internet: www.festo.com/catalogue/...
7
Electric cylinders ESBF, with spindle drive Technical data Operating and environmental conditions Ambient temperature1) [°C] Storage temperature [°C] Degree of protection to IEC 60529 ESBF-… ESBF-…-S1 Relative air humidity [%] Duty cycle [%] Suitable for use in the food industry with ESBF-…-F12) Corrosion resistance class CRC3) ESBF-… ESBF-…-R3 1) 2) 3)
0 … +60 –20 … +60 IP40 IP65 0 … 95 (non-condensing) 100 è extended information on materials 2 3
Note operating range of proximity sensors and motors Extended information on materials on request è technical hotline Only in combination with ESBF-BS-… (ball screw) Corrosion resistance class CRC 2 to Festo standard FN 940070 Moderate corrosion stress. Indoor applications in which condensation may occur. External visible parts with primarily decorative requirements for the surface and which are in direct contact with the ambient atmo sphere typical for industrial applications. Corrosion resistance class CRC 3 to Festo standard FN 940070 High corrosion stress. Outdoor exposure under moderate corrosive conditions. External visible parts with primarily functional requirements for the surface and which are in direct contact with a normal industrial environment.
Mass moment of inertia – Ball screw Size Spindle pitch
32 5
10
40 5
10
16
50 5
10
20
[kg cm2/m] [kg cm2/kg]
0.023 0.122 0.006
0.036 0.139 0.025
0.050 0.46 0.006
0.078 0.48 0.025
0.125 0.523 0.065
0.145 1.019 0.006
0.187 1.043 0.025
0.329 1.139 0.101
Size Spindle pitch
[mm/rev]
63 5
10
25
80 5
15
32
100 5
20
40
J0 at 0 mm stroke JH per meter stroke JL per kg payload
[kg cm2] [kg cm2/m] [kg cm2/kg]
0.491 2.832 0.006
0.486 2.859 0.025
0.65 3.053 0.158
1.529 7.699 0.006
1.648 7.815 0.057
2.119 8.277 0.259
4.696 18.978 0.006
5.050 19.31 0.101
6.71 20.372 0.405
Mass moment of inertia – Lead screw Size Spindle pitch
[mm/rev]
32 2.5
40 3
50 4
J0 at 0 mm stroke JH per meter stroke JL per kg payload
[kg cm2] [kg cm2/m] [kg cm2/kg]
0.016 0.161 0.002
0.045 0.508 0.002
0.141 1.238 0.004
J0 at 0 mm stroke JH per meter stroke JL per kg payload
The mass moment of inertia JA of the electric cylinder is calculated as follows:
8
[mm/rev] [kg cm2]
JA = J0 + jH x working stroke [m] + jL x mpayload [kg]
è Internet: www.festo.com/catalogue/...
Subject to change – 2017/03
Electric cylinders ESBF, with spindle drive Technical data Materials Sectional view 1
2
3
Size 1 2 3 4 5 6 –
Bearing cap Cylinder barrel Piston rod Spindle Spindle nut Drive cover Note on materials
4
5
6
32 … 50
63 … 100
Coated wrought aluminium alloy Smooth anodised wrought aluminium alloy High-alloy stainless steel Rolled steel Rolled steel Coated wrought aluminium alloy RoHS compliant Contains paint-wetting impairment substances
Coated gravity die-cast aluminium
Coated gravity die-cast aluminium
Lateral force Fq as a function of stroke length l Fq
l
ESBF-32 ESBF-40 ESBF-50, 63 ESBF-80, 100
2017/03 – Subject to change
è Internet: www.festo.com/catalogue/...
9
Electric cylinders ESBF, with spindle drive Technical data Max. pressure force F dependent on piston rod length l (I = stroke + optional piston rod extension) F
Due to possible buckling, the pressure force must be limited dependent on the stroke.
For ball screw ESBF-BS-32-…
ESBF-BS-40-…
ESBF-BS-32-…-5P/10P
ESBF-BS-40-…-5P/10P ESBF-BS-40-…-16P
ESBF-BS-50-…
ESBF-BS-63-…
ESBF-BS-50-…-5P/10P ESBF-BS-50-…-20P
10
The tensile force is not affected by this.
ESBF-BS-63-…-5P/10P ESBF-BS-63-…-25P
è Internet: www.festo.com/catalogue/...
Subject to change – 2017/03
Electric cylinders ESBF, with spindle drive Technical data Max. pressure force F dependent on piston rod length l (I = stroke + optional piston rod extension) F
For ball screw ESBF-BS-80-…
ESBF-BS-80-...-5P/15P ESBF-BS-80-...-32P
Due to possible buckling, the pressure force must be limited dependent on the stroke.
The tensile force is not affected by this.
ESBF-BS-100-…
ESBF-BS-100-...-5P/20P ESBF-BS-100-...-40P
For lead screw ESBF-LS-…
ESBF-LS-32 ESBF-LS-40 ESBF-LS-50
2017/03 – Subject to change
è Internet: www.festo.com/catalogue/...
11
Electric cylinders ESBF, with spindle drive Technical data Max. feed speed v as a function of stroke length l For ball screw ESBF-BS-32-…
ESBF-BS-32-…-5P ESBF-BS-32-…-10P
ESBF-BS-40-…-5P ESBF-BS-40-…-10P ESBF-BS-40-…-16P
ESBF-BS-50-…
ESBF-BS-63-…
ESBF-BS-50-…-5P ESBF-BS-50-…-10P ESBF-BS-50-…-20P
ESBF-BS-63-…-5P ESBF-BS-63-…-10P ESBF-BS-63-…-25P
ESBF-BS-80-…
ESBF-BS-100-…
ESBF-BS-80-…-5P ESBF-BS-80-…-15P ESBF-BS-80-…-32P
12
ESBF-BS-40-…
ESBF-BS-100-…-5P ESBF-BS-100-…-20P ESBF-BS-100-…-40P
è Internet: www.festo.com/catalogue/...
Subject to change – 2017/03
Electric cylinders ESBF, with spindle drive Technical data Maximum feed force F dependent on the feed speed v For ball screw ESBF-BS-32-…
ESBF-32-…-5P ESBF-32-…-10P
ESBF-BS-50-…
ESBF-50-…-5P ESBF-50-…-10P ESBF-50-…-20P ESBF-BS-80-…
ESBF-BS-80-…-5P ESBF-BS-80-…-15P ESBF-BS-80-…-32P
2017/03 – Subject to change
ESBF-BS-40-…
ESBF-40-…-5P ESBF-40-…-10P ESBF-40-…-16P ESBF-BS-63-…
ESBF-BS-63-…-5P ESBF-BS-63-…-10P ESBF-BS-63-…-25P ESBF-BS-100-…
ESBF-BS-100-…-5P ESBF-BS-100-…-20P ESBF-BS-100-…-40P
è Internet: www.festo.com/catalogue/...
13
Electric cylinders ESBF, with spindle drive Technical data Maximum feed force F dependent on the feed speed v For lead screw ESBF-LS-…
ESBF-LS-32 ESBF-LS-40 ESBF-LS-50 Service life The service life of the electric cylin der depends largely on that of the lead screw. The operating coeffi cient plays a considerable role in determining the possible service life and it can be determined with the help of the table (è 15)
The operating coefficient for the variant ESBF-…-F1 (NSF-H1 lubricant for food & beverage applications) matches that for the standard type
The service life ends when the maximum number of switching cycles or maximum running performance has been reached: – ESBFBS: 10 million – ESBFLS: è 15 (below) The distance between the foremost and rearmost positions must be at least 2.5 times the spindle pitch per travel cycle.
The specifications for running performance are based on experimentally determined and theoretically calculated data (at room temperature). The running performance that can be achieved in practice can deviate considerably from the specified curves under different parameters
Calculation of the mean feed force Fxm with ball screw (ESBF-BS)
Ǹ
F x1
3
s 1 ) AAA ) F n s1 ) AAA ) sn
3
Fx1
sn
Fxmax Fx3
Fxm = Mean feed force Fx1/n = Feed force of section s1/n = Share of movement cycle that is travel
Fx [N]
F xm +3
Fxm
Fx2
s1
s2 s [100%]
s3
Mean feed force Fxm as a function of running performance L, with an operating coefficient fB of 1.0 at room temperature For ball screw ESBF-BS-32-… ESBF-BS-40-…
ESBF-32-…-5P ESBF-32-…-10P
14
ESBF-40-…-5P ESBF-40-…-10P ESBF-40-…-16P
è Internet: www.festo.com/catalogue/...
Subject to change – 2017/03
Electric cylinders ESBF, with spindle drive Technical data Service life Mean feed force Fxm as a function of running performance L, with an operating coefficient fB of 1.0 at room temperature For ball screw ESBF-BS-50-… ESBF-BS-63-…
ESBF-50-…-5P ESBF-50-…-10P ESBF-50-…-20P
ESBF-BS-63-…-5P ESBF-BS-63-…-10P ESBF-BS-63-…-25P
ESBF-BS-80-…
ESBF-BS-100-…
ESBF-BS-80-…-5P ESBF-BS-80-…-15P ESBF-BS-80-…-32P
ESBF-BS-100-…-5P ESBF-BS-100-…-20P ESBF-BS-100-…-40P
Life cycle taking into account the operating coefficient List + L3 fB List L
= Actual service life = Target service life (è graphs) = Operating coefficient
fB
Load1)
Operating coefficient fB
Sample application
None Lightweight Medium High
1.0 … 1.2 1.2 … 1.4 1.4 … 1.6 1.6 … 2.0
Measuring machine Handling, robot technology Press-in operations Construction, agriculture
1)
This refers to loads caused by impacts, temperatures, contamination, shock and vibrations that affect the cylinder or piston rod.
Reference values for lead screw (ESBF-LS) Size Running performance L Stress cycles L1) Switching cycles L2) 1) 2)
[km] [million] [million]
32
40
50
200 1.0 0.5
250 1.2 0.6
300 1.4 0.7
Movement from position A to B with acceleration and deceleration to stop. Two stress cycles to get back to the starting point.
2017/03 – Subject to change
è Internet: www.festo.com/catalogue/...
15
Electric cylinders ESBF, with spindle drive Technical data Friction losses and driving torque Friction losses The friction losses comprise the no-load driving torque and the speeddependent friction losses.
Mreib + Mleerlauf ) MV
Mreib = Friction torque Mleerlauf = No-load driving torque MV = Friction torque dependent on the feed speed
Mantrieb + Mreib ) Mnutz
Mantrieb = Required driving torque Mreib = Friction torque Mnutz = Effective torque
Driving torque The driving torque required for the cylinder comprises the friction torque and the effective torque. No-load driving torque – Ball screw1) Size Spindle pitch
32 [mm/rev] 5
10
40 5
10
16
50 5
10
20
No-load driving torque Mleerlauf
[Nm]
0.1
0.2
0.2
0.2
0.3
0.3
0.3
Size Spindle pitch
63 [mm/rev] 5
10
25
80 5
15
32
100 5
20
40
No-load driving torque Mleerlauf
[Nm]
0.45
0.5
0.5
0.6
0.65
0.7
0.9
1.0
No-load driving torque – Lead screw1) Size Spindle pitch
32 [mm/rev] 2.5
40 3
50 4
No-load driving torque Mleerlauf
[Nm]
0.2
0.3
1)
16
0.1
0.4
0.1
Corresponds to the required driving torque without load, at a spindle speed of 200 rpm.
è Internet: www.festo.com/catalogue/...
Subject to change – 2017/03
Electric cylinders ESBF, with spindle drive Technical data Friction torque MV as a function of feed speed v For ball screw ESBF-BS-32-…
ESBF-BS-32-…-5P ESBF-BS-32-…-5P
ESBF-BS-50-…
ESBF-BS-50-…-5P ESBF-BS-50-…-10P ESBF-BS-50-…-20P ESBF-BS-80-…
ESBF-BS-80-…-5P ESBF-BS-80-…-15P ESBF-BS-80-…-32P
2017/03 – Subject to change
ESBF-BS-40-…
ESBF-BS-40-…-5P ESBF-BS-40-…-10P ESBF-BS-40-…-16P ESBF-BS-63-…
ESBF-BS-63-…-5P ESBF-BS-63-…-10P ESBF-BS-63-…-25P ESBF-BS-100-…
ESBF-BS-100-…-5P ESBF-BS-100-…-20P ESBF-BS-100-…-40P
è Internet: www.festo.com/catalogue/...
17
Electric cylinders ESBF, with spindle drive Technical data Friction torque MV as a function of feed speed v For lead screw ESBF-LS-…
ESBF-LS-32 ESBF-LS-40 ESBF-LS-50
Effective torque Mnutz as a function of feed force F For ball screw ESBF-BS-32-…
ESBF-BS-32-…-5P ESBF-BS-32-…-10P
ESBF-BS-40-…-5P ESBF-BS-40-…-10P ESBF-BS-40-…-16P
ESBF-BS-50-…
ESBF-BS-63-…
ESBF-BS-50-…-5P ESBF-BS-50-…-10P ESBF-BS-50-…-20P
18
ESBF-BS-40-…
ESBF-BS-63-…-5P ESBF-BS-63-…-10P ESBF-BS-63-…-25P
è Internet: www.festo.com/catalogue/...
Subject to change – 2017/03
Electric cylinders ESBF, with spindle drive Technical data Effective torque Mnutz as a function of feed force F For ball screw ESBF-BS-80-…
ESBF-BS-80-…-5P ESBF-BS-80-…-15P ESBF-BS-80-…-32P
ESBF-BS-100-…
ESBF-BS-100-…-5P ESBF-BS-100-…-20P ESBF-BS-100-…-40P
For lead screw ESBF-LS-…
ESBF-LS-32 ESBF-LS-40 ESBF-LS-50
2017/03 – Subject to change
è Internet: www.festo.com/catalogue/...
19
Electric cylinders ESBF, with spindle drive Technical data Download CAD data è www.festo.com
Dimensions
+
= plus stroke length
Size
AM –0.5
B d11
[mm] 32 40 50 63 80 100
22 24 32 32 40 40
34 39 45 52 60 70
Size
G1
25.5–0.1 30–0.1 34–0.1 330.1 390.1 390.1
BG
D2 H6
D3 f7
E
G
Min.
D1 H9
16 16 17 17 17 17
20 24 28 32 40 50
6 8 12 12 19 24
32 40 50 60 80 100
45+0.5 54+0.5 64+0.5 75+0.5/–0.1 93+0.5/–0.1 110 +0.5/–0.1
25.5–0.1 30–0.1 30–0.1 330.1 390.1 390.1
L1
L2
L3
L4
L5
KK
0.2
Min.
MM –0.1
12+0.2 14+0.2 20+0.2 21–0.5 28–0.5 33–0.5
122.5 +0.2/–1.4 144 +0.2/–1.4 163 +0.2/–1.4 171 +0.7/–1.2 204 +0.7/–1.2 224 +0.7/–1.2
15.9+0.8/–0.3 18.4+0.8/–0.3 27+0.8/–0.3 23.50.5 33.50.5 39.50.5
8 14 17 17 26 30
4 4 5 5 25.9 25.9
M10x1.25 M12x1.25 M16x1.5 M16x1.5 M20x1.5 M20x1.5
14 16 20 20 25 25
[mm] 32 40 50 63 80 100 Size
RT
TG
VA
VD
WH
ZJ
ß1
ß2
ß3
M6 M6 M8 M8 M10 M10
32.5 38 46.5 56.50.5 720.5 890.5
7–0.2 7–0.2 9–0.2 90.2 100.2 120.2
80.1 90.1 11.50.1 150.2 180.2 200.2
25.5+1.9/–0.8 29.5+1.9/–0.8 36.5+1.9/–0.8 37+1.8/–1.7 46+1.8/–1.7 51+1.8/–1.7
148 +2.1/–1.1 173.5 +2.1/–1.1 199.5 +2.1/–1.1 208 250 275
10 13 17 17 22 22
17 19 24 24 30 30
6 6 8 8 6 6
[mm] 32 40 50 63 80 100
20
è Internet: www.festo.com/catalogue/...
Subject to change – 2017/03
Electric cylinders ESBF, with spindle drive Technical data Download CAD data è www.festo.com
Dimensions Variants …E – Piston rod extension
F – Female thread
S1 – Protection class IP65/F1 – for the food industry ESBF-32 … 50
ESBF-63 … 100
Size
A2
[mm]
Max.
32 40 50 63 80 100
200 200 200 200 200 200
2017/03 – Subject to change
D4
EE
L5
L6
K1
0.2 6.4+0.2 8.4+0.2 10.5+0.2 10.5+0.1 13+0.1 13+0.1
M7 M7 M7 Gx Gx Gx
2.6 3.3 4.7 4.7 6.1 6.1
KT
WH
Min. 19.5 24 28 48.5 57.5 68.5
M6 M8 M10 M10 M12 M12
è Internet: www.festo.com/catalogue/...
12 12 16 16 20 20
25.5+1.9/–0.8 29.5+1.9/–0.8 36.5+1.9/–0.8 37+1.8/–1.7 46+1.8/–1.7 51+1.8/–1.7
21
Electric cylinders ESBF, with spindle drive Technical data Ordering data – Standard design – Ball screw Spindle pitch Stroke Part No. [mm/rev] [mm] ESBF-32 5
100 200 300 400 100 200 300 400
10
w8022562 w2215384 w8022563 w8022564 w8022565 w8022566 w8022567 w8022568
Type
ESBF-BS-32-100-5P ESBF-BS-32-200-5P ESBF-BS-32-300-5P ESBF-BS-32-400-5P ESBF-BS-32-100-10P ESBF-BS-32-200-10P ESBF-BS-32-300-10P ESBF-BS-32-400-10P
Spindle pitch [mm/rev] ESBF-50 5
10
20
ESBF-40 5
100 200 300 400 100 200 300 400 100 200 300 400
10
16
-H-
w8022574 w2215385 w8022575 w8022576 w8022577 w8022578 w8022579 w8022580 w8022581 w8022582 w8022583 w8022584
ESBF-BS-40-100-5P ESBF-BS-40-200-5P ESBF-BS-40-300-5P ESBF-BS-40-400-5P ESBF-BS-40-100-10P ESBF-BS-40-200-10P ESBF-BS-40-300-10P ESBF-BS-40-400-10P ESBF-BS-40-100-16P ESBF-BS-40-200-16P ESBF-BS-40-300-16P ESBF-BS-40-400-16P
ESBF-63 5
10
25
Stroke [mm]
Part No.
Type
100 200 300 400 100 200 300 400 100 200 300 400
w8022590 w2215386 w8022591 w8022592 w8022593 w8022594 w8022595 w8022596 w8022597 w8022598 w8022599 w8022600
ESBF-BS-50-100-5P ESBF-BS-50-200-5P ESBF-BS-50-300-5P ESBF-BS-50-400-5P ESBF-BS-50-100-10P ESBF-BS-50-200-10P ESBF-BS-50-300-10P ESBF-BS-50-400-10P ESBF-BS-50-100-20P ESBF-BS-50-200-20P ESBF-BS-50-300-20P ESBF-BS-50-400-20P
100 200 300 400 100 200 300 400 100 200 300 400
w574093 w1347390 w574094 w574095 w574096 w574097 w574098 w574099 w574100 w574101 w574102 w574103
ESBF-BS-63-100-5P ESBF-BS-63-200-5P ESBF-BS-63-300-5P ESBF-BS-63-400-5P ESBF-BS-63-100-10P ESBF-BS-63-200-10P ESBF-BS-63-300-10P ESBF-BS-63-400-10P ESBF-BS-63-100-25P ESBF-BS-63-200-25P ESBF-BS-63-300-25P ESBF-BS-63-400-25P
Note
Order variable strokes and variants via the modular product system è page 24
22
è Internet: www.festo.com/catalogue/...
Subject to change – 2017/03
Electric cylinders ESBF, with spindle drive Technical data Ordering data – Standard design – Ball screw Spindle pitch Stroke Part No. [mm/rev] [mm] ESBF-80 5
100 200 300 400 100 200 300 400 100 200 300 400
15
32
574104 1347391 574105 574106 574107 574108 574109 574110 574111 574112 574113 574114
Ordering data – Standard design – Lead screw Spindle pitch Stroke Part No. [mm/rev] [mm] ESBF-32 2.5
ESBF-40 3
ESBF-50 4
-H-
Type
ESBF-BS-80-100-5P ESBF-BS-80-200-5P ESBF-BS-80-300-5P ESBF-BS-80-400-5P ESBF-BS-80-100-15P ESBF-BS-80-200-15P ESBF-BS-80-300-15P ESBF-BS-80-400-15P ESBF-BS-80-100-32P ESBF-BS-80-200-32P ESBF-BS-80-300-32P ESBF-BS-80-400-32P
Spindle pitch [mm/rev] ESBF-100 5
20
40
Stroke [mm]
Part No.
Type
100 200 300 400 100 200 300 400 100 200 300 400
574115 1347393 574116 574117 574118 574119 574120 574121 574122 574123 574124 574125
ESBF-BS-100-100-5P ESBF-BS-100-200-5P ESBF-BS-100-300-5P ESBF-BS-100-400-5P ESBF-BS-100-100-20P ESBF-BS-100-200-20P ESBF-BS-100-300-20P ESBF-BS-100-400-20P ESBF-BS-100-100-40P ESBF-BS-100-200-40P ESBF-BS-100-300-40P ESBF-BS-100-400-40P
Type
100 200 300 400
8022570 2295381 8022571 8022572
ESBF-LS-32-100-2.5P ESBF-LS-32-200-2.5P ESBF-LS-32-300-2.5P ESBF-LS-32-400-2.5P
100 200 300 400
8022586 2295382 8022587 8022588
ESBF-LS-40-100-3P ESBF-LS-40-200-3P ESBF-LS-40-300-3P ESBF-LS-40-400-3P
100 200 300 400
8022602 2295383 8022603 8022604
ESBF-LS-50-100-4P ESBF-LS-50-200-4P ESBF-LS-50-300-4P ESBF-LS-50-400-4P
Note
Order variable strokes and variants via the modular product system è page 24
2017/03 – Subject to change
è Internet: www.festo.com/catalogue/...
23
Electric cylinders ESBF, with spindle drive Ordering data – Modular products Ordering table Size
32
0 M Module no. Function Drive system
40
8022569 8022585 Electric cylinder Ball screw Lead screw 32 40 [mm] 100 200 300 400 30 … 800 30 … 800 [mm] 2.5 – – 3 – – 5 5 10 10 – – – 16 – – – – – – – –
Size Stroke
Spindle pitch
0 O Piston rod thread type Degree of protection for electrics Corrosion protection Additional features Piston rod extension
50
63
80
100
8022601
574090
574091
574092 1 2
50
– 63
80
100
30 … 1000 – – 4 5 10 – – 20 – – –
30 … 1200 – – – 5 10 – – – 25 – –
30 … 1500 – – – 5 – 15 – – – 32 –
30 … 1500 – – – 5 – – – 20 – – 40
Male thread Female thread Standard IP65 Standard High corrosion protection None Suitable for use in the food industry as per extended information on materials None 1 … 200
1
BS
Only with spindle pitch 5P, 10P, 15P, 16P, 20P, 25P, 32P, 40P
2
LS
Only with spindle pitch 2.5P, 3P, 4P
3
R3
Only with S1
4
F1
Only with R3
Conditions
Code
Entry code
ESBF -BS -LS -… -…
ESBF
-…P
-F -S1 3
-R3
4
-F1 -…E
Not with LS
M O
Mandatory data Options
Transfer order code ESBF
24
–
–
–
–
è Internet: www.festo.com/catalogue/...
–
–
–
–
–
–
Subject to change – 2017/03
Electric cylinders ESBF, with spindle drive Accessories
-H-
Note
Depending on the combination of motor and drive, it may not be possible to reach the maximum feed force of the drive.
When using parallel kits, the no-load driving torque of the respective kit must be taking into consideration.
Technical data è Internet: eamm-a
Permissible axis/motor combinations with axial kit Motor/gear unit1) Axial kit
Type ESBF-32 With servo motor EMME-AS-40-… EMMS-AS-40-… EMMS-AS-55-… EMME-AS-60-… With servo motor and gear unit EMME-AS-40-… EMGA-40-P-G…-EAS-40 EMMS-AS-40-… EMGA-40-P-G…-SAS-40 EMMS-AS-55-… EMGA-60-P-G…-SAS-55 EMME-AS-60-… EMGA-60-P-G…-EAS-60 EMMS-AS-70-… EMGA-60-P-G…-SAS-70 With stepper motor EMMS-ST-42-… EMMS-ST-57-… With stepper motor and gear unit EMMS-ST-42-… EMGA-40-P-G…-SST-42 EMMS-ST-57-… EMGA-60-P-G…-SST-57 With integrated drive EMCA-EC-67-…
1) 2)
Part No.
Type
w1976465 2207372 543147 1322178 550979 1322180 w1956054 2234020
EAMM-A-D32-40P EAMM-A-D32-40P-S12) EAMM-A-D32-40A EAMM-A-D32-40A-S12) EAMM-A-D32-55A EAMM-A-D32-55A-S12) EAMM-A-D32-60P EAMM-A-D32-60P-S12)
1454238 2256396 1454238 2256396 2946758 2946759 2946760 2946761 2946758 2946759
EAMM-A-D32-40G EAMM-A-D32-40G-S12) EAMM-A-D32-40G EAMM-A-D32-40G-S12) EAMM-A-D32-60G EAMM-A-D32-60G-S12) EAMM-A-D32-60H EAMM-A-D32-60H-S12) EAMM-A-D32-60G EAMM-A-D32-60G-S12)
w543148 1322179 w550980 1322181
EAMM-A-D32-42A EAMM-A-D32-42A-S12) EAMM-A-D32-57A EAMM-A-D32-57A-S12)
1454238 2256396 2946758 2946759
EAMM-A-D32-40G EAMM-A-D32-40G-S12) EAMM-A-D32-60G EAMM-A-D32-60G-S12)
1454239 2256397
EAMM-A-D32-67A EAMM-A-D32-67A-S12)
The input torque must not exceed the maximum permissible transferable torque of the axial kit. With degree of protection IP65
Festo core product range
2017/03 – Subject to change
qReady for dispatch from the Festo factory in 24 hours wReady for dispatch in 5 days maximum from stock è Internet: www.festo.com/catalogue/...
25
Electric cylinders ESBF, with spindle drive Accessories Technical data è Internet: eamm-a
Permissible axis/motor combinations with axial kit Motor1) Axial kit
Type ESBF-32 With integrated drive and gear unit EMCA-EC-67-… EMGC-40-… EMCA-EC-67-… EMGC-60-… ESBF-40 With servo motor EMMS-AS-55-… EMME-AS-60-… EMMS-AS-70-… With servo motor and gear unit EMME-AS-40-… EMGA-40-P-G…-EAS-40 EMMS-AS-40-… EMGA-40-P-G…-SAS-40 EMMS-AS-55-… EMGA-60-P-G…-SAS-55 EMME-AS-60-… EMGA-60-P-G…-EAS-60 EMMS-AS-70-… EMGA-60-P-G…-SAS-70 With stepper motor EMMS-ST-57-… EMMS-ST-87-… With stepper motor and gear unit EMMS-ST-42-… EMGA-40-P-G…-SST-42 EMMS-ST-57-… EMGA-60-P-G…-SST-57 With integrated drive EMCA-EC-67-… With integrated drive and gear unit EMCA-EC-67-… EMGC-40-… EMCA-EC-67-… EMGC-60-… 1) 2)
Type
1454238 2256396 2946760 2946761
EAMM-A-D32-40G EAMM-A-D32-40G-S12) EAMM-A-D32-60H EAMM-A-D32-60H-S12)
543153 1322182 w1977000 2151519 550981 1322185
EAMM-A-D40-55A EAMM-A-D40-55A-S12) EAMM-A-D40-60P EAMM-A-D40-60P-S12) EAMM-A-D40-70A EAMM-A-D40-70A-S12)
2256398 2256399 2256398 2256399 2256400 2256409 1454242 2256401 2256400 2256409
EAMM-A-D40-40G-G2 EAMM-A-D40-40G-S12) EAMM-A-D40-40G-G2 EAMM-A-D40-40G-S12) EAMM-A-D40-60G EAMM-A-D40-60G-S12) EAMM-A-D40-60H EAMM-A-D40-60H-S12) EAMM-A-D40-60G EAMM-A-D40-60G-S12)
w543154 1322183 w550982 1322186
EAMM-A-D40-57A EAMM-A-D40-57A-S12) EAMM-A-D40-87A EAMM-A-D40-87A-S12)
2256398 2256399 2256400 2256409
EAMM-A-D40-40G-G2 EAMM-A-D40-40G-S12) EAMM-A-D40-60G EAMM-A-D40-60G-S12)
1454243 2256695
EAMM-A-D40-67A EAMM-A-D40-67A-S12)
2256398 2256399 1454242 2256401
EAMM-A-D40-40G-G2 EAMM-A-D40-40G-S12) EAMM-A-D40-60H EAMM-A-D40-60H-S12)
The input torque must not exceed the maximum permissible transferable torque of the axial kit. With degree of protection IP65
Festo core product range
26
Part No.
qReady for dispatch from the Festo factory in 24 hours wReady for dispatch in 5 days maximum from stock è Internet: www.festo.com/catalogue/...
Subject to change – 2017/03
Electric cylinders ESBF, with spindle drive Accessories Technical data è Internet: eamm-a
Permissible axis/motor combinations with axial kit Motor1) Axial kit
Type
Part No.
ESBF-50 With servo motor EMMS-AS-70-… EMME-AS-80-… EMME-AS-100-… EMMS-AS-100-… With servo motor and gear unit EMMS-AS-55-… EMGA-60-P-G…-SAS-55 EMME-AS-60-… EMGA-60-P-G…-EAS-60 EMMS-AS-70-… EMGA-60-P-G…-SAS-70 EMMS-AS-70-… EMGA-80-P-G…-SAS-70 EMME-AS-80-… EMGA-80-P-G…-EAS-80 EMME-AS-100-… EMGA-80-P-G…-SAS-100 EMMS-AS-100-… EMGA-80-P-G…-SAS-100 With stepper motor EMMS-ST-87-… With stepper motor and gear unit EMMS-ST-57-… EMGA-60-P-G…-SST-57 EMMS-ST-87-… EMGA-80-P-G…-SST-87 With integrated drive and gear unit EMCA-EC-67-… EMGC-60-… 1) 2)
2733783 2734287 w2733785 2734289 w2733784 2734288 w2733784 2734288
Type
EAMM-A-D50-70A EAMM-A-D50-70A-S12) EAMM-A-D50-80P EAMM-A-D50-80P-S12) EAMM-A-D50-100A EAMM-A-D50-100A-S12) EAMM-A-D50-100A EAMM-A-D50-100A-S12)
2733786 2734290 2733796 2907418 2733786 2734290 2733787 2734291 2733787 2734291 2733787 2734291 2733787 2734291
EAMM-A-D50-60G EAMM-A-D50-60G-S12) EAMM-A-D50-60H EAMM-A-D50-60H-S12) EAMM-A-D50-60G EAMM-A-D50-60G-S12) EAMM-A-D50-80G EAMM-A-D50-80G-S12) EAMM-A-D50-80G EAMM-A-D50-80G-S12) EAMM-A-D50-80G EAMM-A-D50-80G-S12) EAMM-A-D50-80G EAMM-A-D50-80G-S12)
w2733781 2734286
EAMM-A-D50-87A EAMM-A-D50-87A-S12)
2733786 2734290 2733787 2734291
EAMM-A-D50-60G EAMM-A-D50-60G-S12) EAMM-A-D50-80G EAMM-A-D50-80G-S12)
2733796 2907418
EAMM-A-D50-60H EAMM-A-D50-60H-S12)
The input torque must not exceed the maximum permissible transferable torque of the axial kit. With degree of protection IP65
-H-
Note
The axial kit (without “S1” in the type code) can be retrofitted with a seal
Festo core product range
2017/03 – Subject to change
set EADS-F to change the degree of protection from IP40 to IP65.
Additional information è eamm-a
qReady for dispatch from the Festo factory in 24 hours wReady for dispatch in 5 days maximum from stock è Internet: www.festo.com/catalogue/...
27
Electric cylinders ESBF, with spindle drive Accessories Technical data è Internet: eamm-a
Permissible axis/motor combinations with axial kit Motor1) Axial kit
Type ESBF-63 With servo motor EMMS-AS-70-… EMME-AS-80-… EMME-AS-100-… EMMS-AS-100-… With servo motor and gear unit EMMS-AS-55-… EMGA-60-P-G…-SAS-55 EMME-AS-60-… EMGA-60-P-G…-EAS-60 EMMS-AS-70-… EMGA-60-P-G…-SAS-70 EMMS-AS-70-… EMGA-80-P-G…-SAS-70 EMME-AS-80-… EMGA-80-P-G…-EAS-80 EMME-AS-100-… EMGA-80-P-G…-SAS-100 EMMS-AS-100-… EMGA-80-P-G…-SAS-100 With stepper motor EMMS-ST-87-… With stepper motor and gear unit EMMS-ST-57-… EMGA-60-P-G…-SST-57 EMMS-ST-87-… EMGA-80-P-G…-SST-87 With integrated drive and gear unit EMCA-EC-67-… EMGC-60-… 1) 2)
543161 2256699 w1977073 2218564 550983 2256700 w550983 2256700
Type
EAMM-A-D60-70A EAMM-A-D60-70A-S12) EAMM-A-D60-80P EAMM-A-D60-80P-S12) EAMM-A-D60-100A EAMM-A-D60-100A-S12) EAMM-A-D60-100A EAMM-A-D60-100A-S12)
2256696 2256698 1454245 2256697 2256696 2256698 1499402 2946762 1499402 2946762 1499402 2946762 1499402 2946762
EAMM-A-D60-60G-G2 EAMM-A-D60-60G-S12) EAMM-A-D60-60H EAMM-A-D60-60H-S12) EAMM-A-D60-60G-G2 EAMM-A-D60-60G-S12) EAMM-A-D60-80G EAMM-A-D60-80G-S12) EAMM-A-D60-80G EAMM-A-D60-80G-S12) EAMM-A-D60-80G EAMM-A-D60-80G-S12) EAMM-A-D60-80G EAMM-A-D60-80G-S12)
w543162 1322188
EAMM-A-D60-87A EAMM-A-D60-87A-S12)
2256696 2256698 1499402 2946762
EAMM-A-D60-60G-G2 EAMM-A-D60-60G-S12) EAMM-A-D60-80G EAMM-A-D60-80G-S12)
1454245 2256697
EAMM-A-D60-60H EAMM-A-D60-60H-S12)
The input torque must not exceed the maximum permissible transferable torque of the axial kit. With degree of protection IP65
Festo core product range
28
Part No.
qReady for dispatch from the Festo factory in 24 hours wReady for dispatch in 5 days maximum from stock è Internet: www.festo.com/catalogue/...
Subject to change – 2017/03
Electric cylinders ESBF, with spindle drive Accessories Technical data è Internet: eamm-a
Permissible axis/motor combinations with axial kit Motor1) Axial kit
Type ESBF-80 With servo motor EMME-AS-100 EMMS-AS-100-… EMMS-AS-140-… With servo motor and gear unit EMMS-AS-70-… EMGA-80-P-G…-SAS-70 EMME-AS-80-… EMGA-80-P-G…-EAS-80 EMME-AS-100-… EMGA-80-P-G…-SAS-100 EMMS-AS-100-… EMGA-80-P-G…-SAS-100 With stepper motor and gear unit EMMS-ST-87-… EMGA-80-P-G…-SST-87 ESBF-100 With servo motor EMME-AS-100 EMMS-AS-100-… EMMS-AS-140-… With servo motor and gear unit EMME-AS-100-… EMGA-120-P-G…-SAS-100 EMMS-AS-100-… EMGA-120-P-G…-SAS-100 EMMS-AS-140-… EMGA-120-P-G…-SAS-140 1) 2)
Part No.
Type
1589665 1600673 1589665 1600673 1588299 1600674
EAMM-A-D80-100A EAMM-A-D80-100A-S12) EAMM-A-D80-100A EAMM-A-D80-100A-S12) EAMM-A-D80-140A EAMM-A-D80-140A-S12)
2946763 2946764 2946763 2946764 2946763 2946764 2946763 2946764
EAMM-A-D80-80G EAMM-A-D80-80G-S12) EAMM-A-D80-80G EAMM-A-D80-80G-S12) EAMM-A-D80-80G EAMM-A-D80-80G-S12) EAMM-A-D80-80G EAMM-A-D80-80G-S12)
2946763 2946764
EAMM-A-D80-80G EAMM-A-D80-80G-S12)
3356796 3356931 3356796 3356931 1588349 1600675
EAMM-A-D100-100A EAMM-A-D100-100A-S1 2) EAMM-A-D100-100A EAMM-A-D100-100A-S1 2) EAMM-A-D100-140A EAMM-A-D100-140A-S1 2)
2449341 2946765 2449341 2946765 2449341 2946765
EAMM-A-D100-120G EAMM-A-D100-120G-S1 2) EAMM-A-D100-120G EAMM-A-D100-120G-S1 2) EAMM-A-D100-120G EAMM-A-D100-120G-S1 2)
The input torque must not exceed the maximum permissible transferable torque of the axial kit. With degree of protection IP65
-H-
Note
The axial kit (without “S1” in the type code) can be retrofitted with a seal
2017/03 – Subject to change
set EADS-F to change the degree of protection from IP40 to IP65.
Additional information è eamm-a
è Internet: www.festo.com/catalogue/...
29
Electric cylinders ESBF, with spindle drive Accessories Part components of the axial kit Axial kit Comprises: Motor flange
Part No. Type ESBF-32 543147 EAMM-A-D32-40A 1322178 EAMM-A-D32-40A-S11) 1454238 EAMM-A-D32-40G 2256396 EAMM-A-D32-40G-S11) w1976465 EAMM-A-D32-40P 2207372 EAMM-A-D32-40P-S11) w543148 EAMM-A-D32-42A 1322179 EAMM-A-D32-42A-S11) 550979 EAMM-A-D32-55A 1322180 EAMM-A-D32-55A-S11) w550980 EAMM-A-D32-57A 1322181 EAMM-A-D32-57A-S11) 2946758 EAMM-A-D32-60G 2946759 EAMM-A-D32-60G-S11) 2946760 EAMM-A-D32-60H 2946761 EAMM-A-D32-60H-S11) w1956054 EAMM-A-D32-60P 2234020 EAMM-A-D32-60P-S11) 1454239 EAMM-A-D32-67A 2256397 EAMM-A-D32-67A-S11) 1)
Coupling housing
Seal set
Part No. Type
Part No. Type
Part No. Type
Part No. Type
552163 EAMF-A-28B-40A
543420 EAMC-16-20-6-6
552155 EAMK-A-D32-28B
–
1460095 EAMF-A-44C-40G-S1
1976704 EAMF-A-28B-40P
552164 EAMF-A-28B-42A
529942 EAMF-A-44A/B-55A
530081 EAMF-A-44A/B-57A
1460105 EAMF-A-44C-60G/H-S1
1460105 EAMF-A-44C-60G/H-S1
1956846 EAMF-A-44C-60P
1476305 EAMF-A-44A/B/C-67A-S1
562681 EAMC-30-32-6-10
1232854 EAMC-16-20-6-8
543419 EAMC-16-20-5-6
551003 EAMC-30-32-6-9
551002 EAMC-30-32-6-6.35
3187577 EAMC-30-32-6-11
1233256 EAMC-30-32-6-14
1233256 EAMC-30-32-6-14
551003 EAMC-30-32-6-9
551006 EAMK-A-D32-44A/C
552155 EAMK-A-D32-28B
552155 EAMK-A-D32-28B
551006 EAMK-A-D32-44A/C
551006 EAMK-A-D32-44A/C
551006 EAMK-A-D32-44A/C
551006 EAMK-A-D32-44A/C
551006 EAMK-A-D32-44A/C
551006 EAMK-A-D32-44A/C
1561526 EADS-F-D32-40A – 2253500 EADS-F-D32-40G – 2207219 EADS-F-D32-40P – 1561527 EADS-F-D32-42A – 1561528 EADS-F-D32-55A – 1561529 EADS-F-D32-57A – 8022150 EADS-F-D32-60G/H – 8022150 EADS-F-D32-60G/H – 2234012 EADS-F-D32-60P – 2253501 EADS-F-D32-67A
With degree of protection IP65
Festo core product range
30
Coupling
qReady for dispatch from the Festo factory in 24 hours wReady for dispatch in 5 days maximum from stock è Internet: www.festo.com/catalogue/...
Subject to change – 2017/03
Electric cylinders ESBF, with spindle drive Accessories Part components of the axial kit Axial kit Comprises: Motor flange
Part No. Type ESBF-40 2256398 EAMM-A-D40-40G-G2 2256399 EAMM-A-D40-40G-S11) 543153 EAMM-A-D40-55A 1322182 EAMM-A-D40-55A-S11) w543154 EAMM-A-D40-57A 1322183 EAMM-A-D40-57A-S11) 2256400 EAMM-A-D40-60G 2256409 EAMM-A-D40-60G-S11) 1454242 EAMM-A-D40-60H 2256401 EAMM-A-D40-60H-S11) w1977000 EAMM-A-D40-60P 2151519 EAMM-A-D40-60P-S11) 1454243 EAMM-A-D40-67A 2256695 EAMM-A-D40-67A-S11) 550981 EAMM-A-D40-70A 1322185 EAMM-A-D40-70A-S11) w550982 EAMM-A-D40-87A 1322186 EAMM-A-D40-87A-S11) 1)
Coupling
Coupling housing
Seal set
Part No. Type
Part No. Type
Part No. Type
Part No. Type
1460095 EAMF-A-44C-40G-S1
558029 EAMC-30-32-8-10
552157 EAMK-A-D40-44A/C
–
529942 EAMF-A-44A/B-55A
530081 EAMF-A-44A/B-57A
1460105 EAMF-A-44C-60G/H-S1
1460105 EAMF-A-44C-60G/H-S1
1956846 EAMF-A-44C-60P
1476305 EAMF-A-44A/B/C-67A-S1
529943 EAMF-A-44A/B-70A
530082 EAMF-A-44A/B-87A
543423 EAMC-30-32-8-9
543421 EAMC-30-32-6.35-8
551004 EAMC-30-32-8-11
562682 EAMC-30-32-8-14
562682 EAMC-30-32-8-14
543423 EAMC-30-32-8-9
551004 EAMC-30-32-8-11
551004 EAMC-30-32-8-11
552157 EAMK-A-D40-44A/C
552157 EAMK-A-D40-44A/C
552157 EAMK-A-D40-44A/C
552157 EAMK-A-D40-44A/C
552157 EAMK-A-D40-44A/C
551006 EAMK-A-D32-44A/C
552157 EAMK-A-D40-44A/C
552157 EAMK-A-D40-44A/C
2253502 EADS-F-D40-40G – 1561530 EADS-F-D40-55A – 1561531 EADS-F-D40-57A – 2253503 EADS-F-D40-60G/H – 2253503 EADS-F-D40-60G/H – 2151545 EADS-F-D40-60P – 2253501 EADS-F-D32-67A – 1561532 EADS-F-D40-70A – 1561533 EADS-F-D40-87A
With degree of protection IP65
Festo core product range
2017/03 – Subject to change
qReady for dispatch from the Festo factory in 24 hours wReady for dispatch in 5 days maximum from stock è Internet: www.festo.com/catalogue/...
31
Electric cylinders ESBF, with spindle drive Accessories Part components of the axial kit Axial kit Comprises: Motor flange
Part No. Type ESBF-50 2733786 EAMM-A-D50-60G 2734290 EAMM-A-D50-60G-S11) 2733796 EAMM-A-D50-60H 2907418 EAMM-A-D50-60H-S11) 2733783 EAMM-A-D50-70A 2734287 EAMM-A-D50-70A-S11) 2733787 EAMM-A-D50-80G 2734291 EAMM-A-D50-80G-S11) w2733785 EAMM-A-D50-80P 2734289 EAMM-A-D50-80P-S11) w2733781 EAMM-A-D50-87A 2734286 EAMM-A-D50-87A-S11) w2733784 EAMM-A-D50-100A 2734288 EAMM-A-D50-100A-S11) ESBF-63 2256696 EAMM-A-D60-60G-G2 2256698 EAMM-A-D60-60G-S11) 1454245 EAMM-A-D60-60H 2256697 EAMM-A-D60-60H-S11) 543161 EAMM-A-D60-70A 2256699 EAMM-A-D60-70A-S11) 1)
Coupling housing
Seal set
Part No. Type
Part No. Type
Part No. Type
Part No. Type
2256289 EAMF-A-64B-60G/H-S1
543424 EAMC-42-50-11-12
2733780 EAMK-A-D50-64B
–
2256289 EAMF-A-64B-60G/H-S1
529945 EAMF-A-64A/B-70A
2843290 EAMF-A-64C-80G-S1
1977113 EAMF-A-64A/C-80P
533140 EAMF-A-64A/B-87A
529947 EAMF-A-64A/C/D-100A
1455671 EAMC-42-50-12-14
543424 EAMC-42-50-11-12
2138701 EAMC-42-50-12-20
551005 EAMC-42-50-12-19
543424 EAMC-42-50-11-12
551005 EAMC-42-50-12-19
2733780 EAMK-A-D50-64B
2733780 EAMK-A-D50-64B
2836865 EAMK-A-D50-64C
2836865 EAMK-A-D50-64C
2733780 EAMK-A-D50-64B
2836865 EAMK-A-D50-64C
2733792 EADS-F-D50-60G/H – 2733792 EADS-F-D50-60G/H – 2733789 EADS-F-D50-70A – 2733793 EADS-F-D50-80G – 2733791 EADS-F-D50-80P – 2733788 EADS-F-D50-87A – 2733790 EADS-F-D50-100A
2256289 EAMF-A-64B-60G/H-S1
2256289 EAMF-A-64B-60G/H-S1
529945 EAMF-A-64A/B-70A
543424 EAMC-42-50-11-12
1455671 EAMC-42-50-12-14
543424 EAMC-42-50-11-12
552160 EAMK-A-D60-64B
552160 EAMK-A-D60-64B
552160 EAMK-A-D60-64B
– 2253505 EADS-F-D60-60G/H – 2253505 EADS-F-D60-60G/H – 8022145 EADS-F-D60-70A
With degree of protection IP65
Festo core product range
32
Coupling
qReady for dispatch from the Festo factory in 24 hours wReady for dispatch in 5 days maximum from stock è Internet: www.festo.com/catalogue/...
Subject to change – 2017/03
Electric cylinders ESBF, with spindle drive Accessories Part components of the axial kit Axial kit Comprises: Motor flange
Part No. Type ESBF-63 1499402 EAMM-A-D60-80G 2946762 EAMM-A-D60-80G-S11) w1977073 EAMM-A-D60-80P 2218564 EAMM-A-D60-80P-S11) w543162 EAMM-A-D60-87A 1322188 EAMM-A-D60-87A-S11) w550983 EAMM-A-D60-100A 2256700 EAMM-A-D60-100A-S11) ESBF-80 2946763 EAMM-A-D80-80G 2946764 EAMM-A-D80-80G-S11) 1589665 EAMM-A-D80-100A 1600673 EAMM-A-D80-100A-S11) 1588299 EAMM-A-D80-140A 1600674 EAMM-A-D80-140A-S11) ESBF-100 1588349 EAMM-A-D100-140A 1600675 EAMM-A-D100-140A-S1 1) 3356796 EAMM-A-D100-100A 3356931 EAMM-A-D100-100A-S1 1) 2449341 EAMM-A-D100-120G 2946765 EAMM-A-D100-120G-S1 1) 1)
Coupling
Coupling housing
Seal set
Part No. Type
Part No. Type
Part No. Type
Part No. Type
2843290 EAMF-A-64C-80G-S1
2138701 EAMC-42-50-12-20
551007 EAMK-A-D60-64C
–
1977113 EAMF-A-64A/C-80P
533140 EAMF-A-64A/B-87A
529947 EAMF-A-64A/C/D-100A
551005 EAMC-42-50-12-19
543424 EAMC-42-50-11-12
551005 EAMC-42-50-12-19
551007 EAMK-A-D60-64C
552160 EAMK-A-D60-64B
551007 EAMK-A-D60-64C
8022146 EADS-F-D60-80G – 2218523 EADS-F-D60-80P – 1561536 EADS-F-D60-87A – 2253507 EADS-F-D60-100A
2933286 EAMF-A-77A-80G-S1
1593628 EAMF-A-77A-100A
1593636 EAMF-A-77A-140A
3181801 EAMC-56-58-19-20
1485673 EAMC-56-58-19-19
1485674 EAMC-56-58-19-24
1593627 EAMK-A-D80-77A
1593627 EAMK-A-D80-77A
1593627 EAMK-A-D80-77A
– 8022147 EADS-F-D80-80G – 1593617 EADS-F-D80-100A – 1593671 EADS-F-D80-140A
1593636 EAMF-A-77A-140A
1593628 EAMF-A-77A-100A
2449380 EAMF-A-77B-120G-S1
1451407 EAMC-67-62-24-24
1485674 EAMC-56-58-19-24
3187895 EAMC-67-62-24-25
1593914 EAMK-A-D100-77A/B
1593914 EAMK-A-D100-77A/B
1593914 EAMK-A-D100-77A/B
– 1593991 EADS-F-D100-140A – 3356966 EADS-F-D100-100A – 8022148 EADS-F-D100-120G
With degree of protection IP65
Festo core product range
2017/03 – Subject to change
qReady for dispatch from the Festo factory in 24 hours wReady for dispatch in 5 days maximum from stock è Internet: www.festo.com/catalogue/...
33
Electric cylinders ESBF, with spindle drive Accessories Technical data è Internet: eamm-u
Permissible axis/motor combinations with parallel kit Motor/gear unit1) Parallel kit
Components can be mounted to the kit facing any direction Optionally with degree of protection IP65 Use in combination with third-party motors on request
Type ESBF-32 With servo motor EMME-AS-40-… EMMS-AS-40-… EMMS-AS-55-… EMME-AS-60-… EMMS-AS-70-… With stepper motor EMMS-ST-42-… EMMS-ST-57-… With gear unit EMGA-40-P-…, EMGC-40-P-… EMGA-60-P-…-SAS/SST3) EMGA-60-P-…-EAS, EMGC-60-P-…3) With motor unit4) MTR-DCI-32S-… MTR-DCI-42S-… MTR-DCI-52S-… ESBF-40 With servo motor EMMS-AS-55-… EMME-AS-60-… EMMS-AS-70-… EMMS-AS-70-… EMME-AS-80-…
1) 2) 3) 4)
Type
w2153283 2154009 1201591 1202302 1210126 1210450 w2619586 2619688 2755565 2781711
EAMM-U-50-D32-40P-78 EAMM-U-50-D32-40P-78-S1 2) EAMM-U-50-D32-40A-78 EAMM-U-50-D32-40A-78-S1 2) EAMM-U-60-D32-55A-91 EAMM-U-60-D32-55A-91-S1 2) EAMM-U-70-D32-60P-96 EAMM-U-70-D32-60P-96-S1 2) EAMM-U-70-D32-70A-96 EAMM-U-70-D32-70A-96-S1 2)
w1201607 1202312 w1210419 1210453
EAMM-U-50-D32-42A-78 EAMM-U-50-D32-42A-78-S1 2) EAMM-U-60-D32-57A-91 EAMM-U-60-D32-57A-91-S1 2)
1577358 1577346 2748181 2778302 2778393 2781450
EAMM-U-60-D32-40G-91 EAMM-U-60-D32-40G-91-S1 2) EAMM-U-70-D32-60G-96 EAMM-U-70-D32-60G-96-S1 2) EAMM-U-70-D32-60H-96 EAMM-U-70-D32-60H-96-S1 2)
1570862 1577393 2755890
EAMM-U-50-D32-32B-78 EAMM-U-60-D32-42B/C-91 EAMM-U-70-D32-52B/C-96
1210438 1210458 w2617488 2546123 2786204 2786316 1212826 1212854 w2802441 2802656
EAMM-U-60-D40-55A-91 EAMM-U-60-D40-55A-91-S1 2) EAMM-U-70-D40-60P-96 EAMM-U-70-D40-60P-96-S1 2) EAMM-U-70-D40-70A-96 EAMM-U-70-D40-70A-96-S1 2) EAMM-U-86-D40-70A-102 EAMM-U-86-D40-70A-102-S1 2) EAMM-U-86-D40-80P-102 EAMM-U-86-D40-80P-102-S1 2)
The input torque must not exceed the maximum permissible transferable torque of the parallel kit. With degree of protection IP65 Gear unit drive shaft diameter: EMGA-60-P-…-SAS/-SST11 mm; EMGA-60-P-…-EAS, EMGC-60-P14 mm Only in combination with ESBF-LS-…
Festo core product range
34
Part No.
qReady for dispatch from the Festo factory in 24 hours wReady for dispatch in 5 days maximum from stock è Internet: www.festo.com/catalogue/...
Subject to change – 2017/03
Electric cylinders ESBF, with spindle drive Accessories Technical data è Internet: eamm-u
Permissible axis/motor combinations with parallel kit Motor/gear unit1) Parallel kit
Components can be mounted to the kit facing any direction Optionally with degree of protection IP65 Use in combination with third-party motors on request
Type
Part No.
ESBF-40 With stepper motor EMMS-ST-57-… EMMS-ST-87-… With gear unit EMGA-40-P-…, EMGC-40-P-… EMGA-60-P-…-SAS/SST3 EMGA-60-P-…-EAS, EMGC-60-P-…3) EMGA-60-P-…-SAS/SST3 EMGA-60-P-…-EAS, EMGC-60-P-…3) With motor unit4) MTR-DCI-42S-… MTR-DCI-52S-… MTR-DCI-52S-… ESBF-50 With servo motor EMMS-AS-70-… EMME-AS-80-… EMME-AS-100-… EMMS-AS-100-… With stepper motor EMMS-ST-87-…
1) 2) 3) 4)
Type
w1210442 1210462 w1215802 1215814
EAMM-U-60-D40-57A-91 EAMM-U-60-D40-57A-91-S1 2) EAMM-U-86-D40-87A-102 EAMM-U-86-D40-87A-102-S1 2)
1577165 1435968 2785471 2785542 2786101 2786137 1586445 1586429 1586496 1586372
EAMM-U-60-D40-40G-91 EAMM-U-60-D40-40G-91-S1 2) EAMM-U-70-D40-60G-96 EAMM-U-70-D40-60G-96-S1 2) EAMM-U-70-D40-60H-96 EAMM-U-70-D40-60H-96-S1 2) EAMM-U-86-D40-60G-102 EAMM-U-86-D40-60G-102-S1 2) EAMM-U-86-D40-60H-102 EAMM-U-86-D40-60H-102-S1 2)
1570950 2786802 1537046
EAMM-U-60-D40-42B/C-91 EAMM-U-70-D40-52B/C-96 EAMM-U-86-D40-52B/C-102
2786899 2756078 w2803053 2803073 w2799424 2799488 w2799424 2799488
EAMM-U-70-D50-70A-96 EAMM-U-70-D50-70A-96-S1 2) EAMM-U-86-D50-80P-102 EAMM-U-86-D50-80P-102-S1 2) EAMM-U-110-D50-100A-120 EAMM-U-110-D50-100A-120-S1 2) EAMM-U-110-D50-100A-120 EAMM-U-110-D50-100A-120-S1 2)
w2802708 2802742
EAMM-U-86-D50-87A-102 EAMM-U-86-D50-87A-102-S1 2)
The input torque must not exceed the maximum permissible transferable torque of the parallel kit. With degree of protection IP65 Gear unit drive shaft diameter: EMGA-60-P-…-SAS/-SST11 mm; EMGA-60-P-…-EAS, EMGC-60-P14 mm Only in combination with ESBF-LS-…
-H-
Note
The clamping component EADT is required to adjust the toothed belt pretension with EAMM-U-110.
The motor and/or axis shaft can optionally be supported with a counter bearing EAMG.
Festo core product range
qReady for dispatch from the Festo factory in 24 hours wReady for dispatch in 5 days maximum from stock
2017/03 – Subject to change
Additional information è eamm-u
è Internet: www.festo.com/catalogue/...
35
Electric cylinders ESBF, with spindle drive Accessories Technical data è Internet: eamm-u
Permissible axis/motor combinations with parallel kit Motor/gear unit1) Parallel kit
Components can be mounted to the kit facing any direction Optionally with degree of protection IP65 Use in combination with third-party motors on request
Type ESBF-50 With gear unit EMGA-60-P-…-SAS/SST3) EMGA-60-P-…-EAS, EMGC-60-P-…3) EMGA-60-P-…-SAS/SST3) EMGA-60-P-…-EAS, EMGC-60-P-…3) EMGA-80-P-…
ESBF-63 With servo motor EMMS-AS-70-… EMME-AS-80-… EMME-AS-100-… EMMS-AS-100-… With stepper motor EMMS-ST-87-… With gear unit EMGA-60-P-…-SAS/SST3 EMGA-60-P-…-EAS, EMGC-60-P-…3) EMGA-60-P-…-SAS/SST3 EMGA-60-P-…-EAS, EMGC-60-P-…3) EMGA-80-P-…
1) 2) 3)
Part No.
Type
2803125 2803197 2803326 2803325 2797368 2798665 2798760 2799150 2799196 2799281
EAMM-U-86-D50-60G-102 EAMM-U-86-D50-60G-102-S1 2) EAMM-U-86-D50-60H-102 EAMM-U-86-D50-60H-102-S1 2) EAMM-U-110-D50-60G-120 EAMM-U-110-D50-60G-120-S1 2) EAMM-U-110-D50-60H-120 EAMM-U-110-D50-60H-120-S1 2) EAMM-U-110-D50-80G-120 EAMM-U-110-D50-80G-120-S1 2)
1212477 1212835 w2155875 2156527 w1202436 1203112 w1202436 1203112
EAMM-U-86-D60-70A-102 EAMM-U-86-D60-70A-102-S1 2) EAMM-U-86-D60-80P-102 EAMM-U-86-D60-80P-102-S1 2) EAMM-U-110-D60-100A-120 EAMM-U-110-D60-100A-120-S1 2) EAMM-U-110-D60-100A-120 EAMM-U-110-D60-100A-120-S1 2)
w1215784 1215810
EAMM-U-86-D60-87A-102 EAMM-U-86-D60-87A-102-S1 2)
1586347 1437163 1586276 1530837 1543240 1436183 1542264 1530621 1532949 1530875
EAMM-U-86-D60-60G-102 EAMM-U-86-D60-60G-102-S1 2) EAMM-U-86-D60-60H-102 EAMM-U-86-D60-60H-102-S1 2) EAMM-U-110-D60-60G-120 EAMM-U-110-D60-60G-120-S1 2) EAMM-U-110-D60-60H-120 EAMM-U-110-D60-60H-120-S1 2) EAMM-U-110-D60-80G-120 EAMM-U-110-D60-80G-120-S1 2)
The input torque must not exceed the maximum permissible transferable torque of the parallel kit. With degree of protection IP65 Gear unit drive shaft diameter: EMGA-60-P-…-SAS/-SST11 mm; EMGA-60-P-…-EAS, EMGC-60-P14 mm
-H-
Note
The clamping component EADT is required to adjust the toothed belt pretension with EAMM-U-110.
The motor and/or axis shaft can optionally be supported with a counter bearing EAMG.
Festo core product range
qReady for dispatch from the Festo factory in 24 hours wReady for dispatch in 5 days maximum from stock
36
è Internet: www.festo.com/catalogue/...
Additional information è eamm-u
Subject to change – 2017/03
Electric cylinders ESBF, with spindle drive Accessories Technical data è Internet: eamm-u
Permissible axis/motor combinations with parallel kit Motor/gear unit1) Parallel kit
Components can be mounted to the kit facing any direction Optionally with degree of protection IP65 Use in combination with third-party motors on request
Type ESBF-80 With servo motor EMME-AS-100-… EMMS-AS-100-… EMMS-AS-140-… With gear unit EMGA-80-P-…
ESBF-100 With servo motor EMMS-AS-140-… With gear unit EMGA-120-P-…
1) 2)
Part No.
Type
1465438 1433650 1465438 1433650 1465530 1433709
EAMM-U-110-D80-100A-120 EAMM-U-110-D80-100A-120-S1 2) EAMM-U-110-D80-100A-120 EAMM-U-110-D80-100A-120-S1 2) EAMM-U-145-D80-140A-188 EAMM-U-145-D80-140A-188-S1 2)
1589614 1589706
EAMM-U-110-D80-80G-120 EAMM-U-110-D80-80G-120-S1 2)
1465541 1433852
EAMM-U-145-D100-140A-188 EAMM-U-145-D100-140A-188-S1 2)
2803620 2803622
EAMM-U-145-D100-120G-188 EAMM-U-145-D100-120G-188-S1 2)
The input torque must not exceed the maximum permissible transferable torque of the parallel kit. With degree of protection IP65
-H-
Note
The clamping component EADT is required to adjust the toothed belt pretension with EAMM-U-110.
2017/03 – Subject to change
The motor and/or axis shaft can optionally be supported with a counter bearing EAMG.
Additional information è eamm-u
è Internet: www.festo.com/catalogue/...
37
Electric cylinders ESBF, with spindle drive Accessories Protective bellows kit EADB
General technical data Type EADB-V2-
32
Max. stroke range of cylinder1) Type of mounting
[mm]
Mounting position Resistance to media Ambient temperature2) Degree of protection to IEC 60529 Corrosion resistance class CRC3) 1) 2) 3)
[°C]
40
50
63
30 … 500 30 … 500 30 … 500 30 … 500 Push-on Via threaded pin Any Dust, chippings, oil, grease, petrol (è Internet: Resistance to media) –10 … +80 IP65 3
80 30 … 500
In combination with the protective bellows kit EADB Note operating range of proximity sensors and cylinder Corrosion resistance class CRC 3 to Festo standard FN 940070 High corrosion stress. Outdoor exposure under moderate corrosive conditions. External visible parts with primarily functional requirements for the surface and which are in direct contact with a normal industrial environment.
Materials Sectional view 1
2
3
4
Bellows 1 2 3 4 –
Weight [g] Type EADB-V2Stroke [mm]
Connection Adapter Bellows End piece O-ring Note on materials
Anodised wrought aluminium alloy Polyamide NBR Anodised wrought aluminium alloy NBR Free of copper and PTFE RoHS compliant
32
40
50
63
80
Product weight 10 … 100 101 … 200 201 … 300 301 … 400 401 … 500
116 155 173 212 233
109 146 164 201 222
190 261 306 377 402
203 265 307 370 391
269 327 365 423 444
Moving mass 10 … 100 101 … 200 201 … 300 301 … 400 401 … 500
46 85 104 143 163
44 82 99 137 157
93 164 209 280 305
79 142 183 246 267
72 130 168 226 247
38
è Internet: www.festo.com/catalogue/...
Subject to change – 2017/03
Electric cylinders ESBF, with spindle drive Accessories Travel speed v as a function of tubing length l The protective bellows kit is a leakfree system. To prevent unwanted media from being drawn in, the supply and exhaust air for the kit must be ducted
1
For size 32
via a pressure compensation hole in the connection part 1. The pressure generated in the protect ive bellows kit by the positioning mo tion is primarily defined by the travel
speed and tubing length. The recom mended tubing length based on the travel speed of the drive can be read from the graph.
For size 40
with QS-G1/4-12, QSH-16-12, PUN-16x2,5 with QS-G1/4-12, PUN-12x2 with QS-G1/4-10, PUN-10x1,5 For size 50
with QS-G1/4-12, QSH-16-12, PUN-16x2,5 with QS-G1/4-10, PUN-10x1,5
For size 63
with QS-G1/4-12, QSH-16-12, PUN-16x2,5
with QS-G1/4-12, PUN-12x2 with QS-G1/4-12, QSH-16-12, PUN-16x2,5
For size 80
with QS-G1/4-12, PUN-12x2 with QS-G1/4-12, QSH-16-12, PUN-16x2,5
2017/03 – Subject to change
è Internet: www.festo.com/catalogue/...
39
Electric cylinders ESBF, with spindle drive Accessories Tubing size and push-in fitting for pressure compensation hole The push-in fittings in the following table must be used for the pressure compensation hole.
Silencers can be used as an altern ative. This reduces the travel speed slightly.
[mm]
Tubing O.D. [mm]
Push-in fitting Part No. Type
32, 40, 50, 63, 80 32, 63, 80 32, 40
16
q186350
QS-G¼-12
12 10
q186350 q186101
QS-G¼-12 QS-G¼-10
Push-in sleeve Part No. Type 153261
Plastic tubing Type
QSH-16-12
PUN-16x2,5
– –
PUN-12x2 PUN-10x1,5
Download CAD data è www.festo.com
Dimensions
+ Stroke [mm]
A21)
10 … 100 101 … 200 201 … 300 301 … 400 401 … 500
52 81 92 121 139
Stroke [mm]
A21)
10 … 100 101 … 200 201 … 300 301 … 400 401 … 500
50 79 90 119 137
1)
D2
32 EE
L1
L2
WH+A2
57
17
G¼
15
23.3
77.5 106.5 117.5 146.5 164.5
D1 Max.
D2
40 EE
L1
L2
WH+A2
23.3
79.5 108.5 119.5 148.5 166.5
57
17
G¼
15
The dimension corresponds to the E value (piston rod extension) of the cylinder
Festo core product range
40
D1 Max.
= plus stroke length
qReady for dispatch from the Festo factory in 24 hours wReady for dispatch in 5 days maximum from stock è Internet: www.festo.com/catalogue/...
Subject to change – 2017/03
Electric cylinders ESBF, with spindle drive Accessories Stroke [mm]
A21)
10 … 100 101 … 200 201 … 300 301 … 400 401 … 500
46 70 82 107 119
Stroke [mm]
A21)
10 … 100 101 … 200 201 … 300 301 … 400 401 … 500
45 70 82 106 119
Stroke [mm]
A21)
10 … 100 101 … 200 201 … 300 301 … 400 401 … 500
48 73 85 109 122
1)
D1 Max.
D2
50 EE
L1
L2
WH+A2
93
17
G¼
21
29.4
82.5 106.5 118.5 143.5 155.5
D1 Max.
D2
63 EE
L1
L2
WH+A2
93
17
G¼
25
33.9
82 107 119 143 156
D1 Max.
D2
80 EE
L1
L2
WH+A2
42.9
94 119 131 155 168
93
17
G¼
31
The dimension corresponds to the E value (piston rod extension) of the cylinder
2017/03 – Subject to change
è Internet: www.festo.com/catalogue/...
41
Electric cylinders ESBF, with spindle drive Accessories Ordering data – Protective bellows kit An extended piston rod (order code …E) è page 24 is absolutely essen tial if a protective bellows kit is to be used.
The necessary dimensions for …E as a function of cylinder size and stroke as well as the corresponding protective bellows kit are indicated in the follow ing table:
Order example: Selected electric cylinder: ESBF-BS-63-250-5P-…E The dimension for the corresponding E value (see table): 82 mm Complete type code for electric cylinder: ESBF-BS-63-250-5P-82E The corresponding protective bellows kit: EADB-V2-63-S201-300
Cylinder data
Stroke
[mm]
[mm]
Dimension for …E [mm]
32
10 … 100 101 … 200 201 … 300 301 … 400 401 … 500
52 81 92 121 139
2828829 2828830 2828831 2828832 2828833
EADB-V2-32-S10-100 EADB-V2-32-S101-200 EADB-V2-32-S201-300 EADB-V2-32-S301-400 EADB-V2-32-S401-500
40
10 … 100 101 … 200 201 … 300 301 … 400 401 … 500
50 79 90 119 137
2828834 2828835 2828836 2828837 2828838
EADB-V2-40-S10-100 EADB-V2-40-S101-200 EADB-V2-40-S201-300 EADB-V2-40-S301-400 EADB-V2-40-S401-500
50
10 … 100 101 … 200 201 … 300 301 … 400 401 … 500
46 70 82 107 119
2828839 2828840 2828841 2828842 2828843
EADB-V2-50-S10-100 EADB-V2-50-S101-200 EADB-V2-50-S201-300 EADB-V2-50-S301-400 EADB-V2-50-S401-500
63
10 … 100 101 … 200 201 … 300 301 … 400 401 … 500
45 70 82 106 119
1488361 1488362 1488363 1488364 1488365
EADB-V2-63-S10-100 EADB-V2-63-S101-200 EADB-V2-63-S201-300 EADB-V2-63-S301-400 EADB-V2-63-S401-500
80
10 … 100 101 … 200 201 … 300 301 … 400 401 … 500
48 73 85 109 122
1489406 1489407 1489408 1489409 1489410
EADB-V2-80-S10-100 EADB-V2-80-S101-200 EADB-V2-80-S201-300 EADB-V2-80-S301-400 EADB-V2-80-S401-500
42
Protective bellows kit Part No. Type
è Internet: www.festo.com/catalogue/...
Subject to change – 2017/03
Electric cylinders ESBF, with spindle drive Accessories Materials: Plate: Anodised aluminium Clamping piece: Coated steel
Profile mounting EAHF
RoHS compliant
Fx
Dimensions and ordering data For size AH
B1
B2
B4
D1
H1
H2
L1
L2
L3
76 84.5 94 105 130 147
60 68 81 92 110 127
26 26 30 30 38 38
9 9 9 9 11 11
16 16 22.8 22.8 28.1 28.1
23.6 23.6 30.4 30.4 42.5 42.5
80 80 80 80 84 84
60 60 60 60 64 64
34 34 41 41 44 44
[mm] 32 40 50 63 80 100
32 36 44.5 50 62.5 71
For size
Transferable axial force Fx
[mm]
[kN]
32, 40 50, 63 80, 100
1.6 3.6 4.0
1)
CRC1)
Weight
Part No.
Type
[g] 3 3 3
218 340 570
w2838839 w1547781 1547780
EAHF-V2-32/40-P EAHF-V2-50/63-P EAHF-V2-80/100-P
Corrosion resistance class CRC 3 to Festo standard FN 940070 High corrosion stress. Outdoor exposure under moderate corrosive conditions. External visible parts with primarily functional requirements for the surface and which are in direct contact with a normal industrial environment.
Festo core product range
2017/03 – Subject to change
qReady for dispatch from the Festo factory in 24 hours wReady for dispatch in 5 days maximum from stock è Internet: www.festo.com/catalogue/...
43
Electric cylinders ESBF, with spindle drive Accessories Materials: HNC: Galvanised steel
Foot mounting HNC/CRHNC, for parallel motor attachment
CRHNC: High-alloy steel Free of copper and PTFE
-H-
2 Electric cylinder ESBF 3 Parallel kit EAMM-U 4 Motor EMME-AS/EMMS-AS
Dimensions and ordering data For size AB [mm] 32 40 50 63 80 100
AH
7 10 10 10 12 14.5
[mm]
EAMM-U-50
EAMM-U-60
32 40 50 63 80 100
217 – – – – –
228 257.5 – – – – ESBF-… CRC1)
[mm]
Max. load carry ing ability [kN]
32 40 50 63 80 100
0.9 1.5 2.5 4 6 9
2 2 2 2 2 2
1)
Weight [g] 144 193 353 436 829 1009
4 4 5 5 6 6
Part No. q174369 q174370 q174371 q174372 q174373 174374
= plus stroke length
AU
TR
±0.2
JS14
24 28 32 32 41 41
32 36 45 50 63 75
45–0.5 54–0.6 64–0.6 75–0.6 93–0.8 110 –0.8
EAMM-U-110
EAMM-U-145
– – 313.5 322 373 –
– – – – 390.5 415.5
XA With parallel kit EAMM-U-70 EAMM-U-86 236.5 266 298 – – –
+
– 270.5 302.5 311 – –
US
Type
ESBF-…-R3 CRC1) Weight [g]
Part No.
Type
HNC-32 HNC-40 HNC-50 HNC-63 HNC-80 HNC-100
4 4 4 4 4 4
176937 176938 176939 176940 176941 176942
CRHNC-32 CRHNC-40 CRHNC-50 CRHNC-63 CRHNC-80 CRHNC-100
139 188 341 424 809 990
Corrosion resistance class CRC 2 to Festo standard FN 940070 Moderate corrosion stress. Indoor applications in which condensation may occur. External visible parts with primarily decorative requirements for the surface and which are in direct contact with the ambient atmo sphere typical for industrial applications. Corrosion resistance class CRC 4 to Festo standard FN 940070 Particularly high corrosion stress. Outdoor exposure under extreme corrosive conditions. Parts exposed to aggressive media, for instance in the chemical or food industries. These applications may need to be suppor ted by special tests (è also FN 940082) using appropriate media.
Festo core product range
44
AT
6.5 9 9.5 12.5 15 17.5
For size
For size
The foot mounting can only be secured at the rear, on the parallel kit.
AO
32 36 45 50 63 71
Note
qReady for dispatch from the Festo factory in 24 hours wReady for dispatch in 5 days maximum from stock è Internet: www.festo.com/catalogue/...
Subject to change – 2017/03
Electric cylinders ESBF, with spindle drive Accessories Materials: High-alloy stainless steel
Flange mounting EAHH
RoHS compliant Free of copper and PTFE
2 Electric cylinder ESBF Dimensions and ordering data For size E [mm] 32 40 50 63 80 100
45 54 64 75 93 110
For size
Max. load carrying ability
[mm]
[kN]
32 40 50 63 80 100
1 3 5 7 12 17
1)
FB H13
js14
7 9 9 9 12 14
10 10 12 12 16 16
ESBF-…-R3 CRC1) 4 4 4 4 4 4
MF
R
TF
UF
W
1 32 36 45 50 63 75
Weight [g] 206 275 496 633 1360 1880
64 72 90 100 126 150
Part No. w2827587 w2827588 w2827589 w1502305 1502306 1502307
80 90 110 120 150 175
15.5 19.5 24.5 25 30 35
Type EAHH-V2-32-R1 EAHH-V2-40-R1 EAHH-V2-50-R1 EAHH-V2-63-R1 EAHH-V2-80-R1 EAHH-V2-100-R1
Corrosion resistance class CRC 4 to Festo standard FN 940070 Particularly high corrosion stress. Outdoor exposure under extreme corrosive conditions. Parts exposed to aggressive media, for instance in the chemical or food industries. These applications may need to be suppor ted by special tests (è also FN 940082) using appropriate media.
2017/03 – Subject to change
è Internet: www.festo.com/catalogue/...
45
Electric cylinders ESBF, with spindle drive Accessories Materials: ZNCF: Stainless steel casting CRZNG: Electropolished stainless steel casting
Trunnion flange ZNCF/CRZNG
2 Electric cylinder ESBF 3 Parallel kit EAMM-U Dimensions and ordering data For size C2
4 Motor EMME-AS/EMMS-AS + = plus stroke length
C3
TD e9
TL
86 105 117 136 156 189
12 16 16 20 20 25
12h14 16h14 16h14 20+0.5/–0.7 19.5+0.5/–0.7 24.5+0.5/–0.7
[mm] 32 40 50 63 80 100
71 87 99 116 136 164
For size [mm]
EAMM-U-50
EAMM-U-60
32 40 50 63 80 100
201 – – – – –
212 239.5 – – – –
For size
ESBF-… CRC1)
[mm]
Max. load carrying ability [kN]
32 40 50 63 80 100
0.9 1.5 2.5 4 6 9
2 2 2 2 2 2
1)
46
Free of copper and PTFE
TM H14
XL With parallel kit EAMM-U-70 EAMM-U-86 220.5 248 278 – – –
US
– 252.5 282.5 291 – –
50 63 75 90 110 132
45 54 64 75 93 110
EAMM-U-110
EAMM-U-145
– – 293.5 302 346 –
– – – – 363.5 393.5
Weight [g]
Part No.
Type
ESBF-…-R3 CRC1) Weight [g]
Part No.
Type
150 285 473 687 1296 2254
174411 174412 174413 174414 174415 174416
ZNCF-32 ZNCF-40 ZNCF-50 ZNCF-63 ZNCF-80 ZNCF-100
4 4 4 4 4 4
161852 161853 161854 161855 161856 161857
CRZNG-32 CRZNG-40 CRZNG-50 CRZNG-63 CRZNG-80 CRZNG-100
150 285 473 687 1296 2254
Corrosion resistance class CRC 2 to Festo standard FN 940070 Moderate corrosion stress. Indoor applications in which condensation may occur. External visible parts with primarily decorative requirements for the surface and which are in direct contact with the ambient atmo sphere typical for industrial applications. Corrosion resistance class CRC 4 to Festo standard FN 940070 Particularly high corrosion stress. Outdoor exposure under extreme corrosive conditions. Parts exposed to aggressive media, for instance in the chemical or food industries. These applications may need to be suppor ted by special tests (è also FN 940082) using appropriate media.
è Internet: www.festo.com/catalogue/...
Subject to change – 2017/03
Electric cylinders ESBF, with spindle drive Accessories Trunnion support LNZG Materials: Trunnion support: Anodised aluminium Plain bearing: Plastic Free of copper and PTFE
Dimensions and ordering data For size Max. load carrying ability [mm] [kN]
CR D11
DA H13
±0.1
32 40, 50 63, 80 100
12 16 20 25
11 15 18 20
15 18 20 25
TH
UL
For size
0.9 2.5 6 9 KE
NH
[mm] 32 40, 50 63, 80 100 1)
FK
CRC1)
±0.2 6.8 9 11 13
18 21 23 28.5
32 36 42 50
FN
FS
H1
HB H13
30 36 40 50
10.5 12 13 16
15 18 20 24.5
6.6 9 11 14
Weight
Part No.
Type
32959 32960 32961 32962
LNZG-32 LNZG-40/50 LNZG-63/80 LNZG-100/125
[g] 46 55 65 75
2 2 2 2
83 129 178 306
Corrosion resistance class CRC 2 to Festo standard FN 940070 Moderate corrosion stress. Indoor applications in which condensation may occur. External visible parts with primarily decorative requirements for the surface and which are in direct contact with the ambient atmo sphere typical for industrial applications.
2017/03 – Subject to change
è Internet: www.festo.com/catalogue/...
47
Electric cylinders ESBF, with spindle drive Accessories Trunnion support CRLNZG Materials: High-alloy steel Free of copper and PTFE
Dimensions and ordering data For size Max. load carrying ability [mm] [kN]
CR D11
±0.1
32 40/50 63, 80 100
12 16 20 25
15 18 20 25
For size
0.9 2.5 6 9 NH
[mm] 32 40/50 63, 80 100 1)
48
TH
FK
UL
CRC1)
±0.2 18 21 23 28.5
32 36 42 50
FN
FS
H1
HB H13
30 36 40 50
10.5 12 13 16
15 18 20 24.5
6.6 9 11 14
Weight
Part No.
Type
161874 161875 161876 161877
CRLNZG-32 CRLNZG-40/50 CRLNZG-63/80 CRLNZG-100/125
[g] 46 55 65 75
4 4 4 4
205 323 435 739
Corrosion resistance class CRC 4 to Festo standard FN 940070 Particularly high corrosion stress. Outdoor exposure under extreme corrosive conditions. Parts exposed to aggressive media, for instance in the chemical or food industries. These applications may need to be suppor ted by special tests (è also FN 940082) using appropriate media.
è Internet: www.festo.com/catalogue/...
Subject to change – 2017/03
Electric cylinders ESBF, with spindle drive Accessories Materials: Aluminium
Swivel flange DAMS
RoHS compliant Free of copper and PTFE
2 Electric cylinder ESBF 3 Parallel kit EAMM-U Dimensions and ordering data For size DB [mm] 40 50 63 80 100
6.5 8.5 8.5 10.5 10.5
4 Motor EMME-AS/EMMS-AS + = plus stroke length
E
FB
FL
TG
W Max. [°]
63 73 83 103 127
52 60 70 90 110
25 27 32 36 41
38 46.5 56.5 72 89
32 45 42 31 36
For size [mm]
EAMM-U-60
EAMM-U-70
XC With parallel kit EAMM-U-86
40 50 63 80 100
254.5 – – – –
263 293 – – –
267.5 297.5 311 – –
For size
Max. load carrying ability
[mm]
[kN]
40 50 63 80 100
3 5 7 12 17
1)
CRC1)
Weight
EAMM-U-110
EAMM-U-145
– 308.5 322 368 –
– – – 385.5 415.5
Part No.
Type
2787470 2787651 1555443 1556588 1560237
DAMS-K-V1-40-V-R3 DAMS-K-V1-50-V-R3 DAMS-K-V1-63-V-R3 DAMS-K-V1-80-V-R3 DAMS-K-V1-100-V-R3
[g] 3 3 3 3 3
258 451 657 1240 1940
Corrosion resistance class CRC 3 to Festo standard FN 940070 High corrosion stress. Outdoor exposure under moderate corrosive conditions. External visible parts with primarily functional requirements for the surface and which are in direct contact with a normal industrial environment.
-H-
Note
The swivel flange SNCS or SNCB (max. load carrying ability of 1 kN) can be used for size 32.
2017/03 – Subject to change
è Internet: www.festo.com/catalogue/...
49
Electric cylinders ESBF, with spindle drive Accessories Materials: Die-cast aluminium
Swivel flange SNC
Free of copper and PTFE RoHS compliant
1 The king pin is protected against rotation with a spring pin Dimensions and ordering data For size CG
CP
[mm]
H14
H14
32 40 50 63 80 100
14 16 21 21 25 25
34 40 45 51 65 75
E
EK H9
±0.2
45+0.2/–0.5 54–0.5 64–0.6 75–0.6 93–0.8 110 +0.3/–0.8
10 12 16 16 20 20
22 25 27 32 36 41
For size [mm]
EAMM-U-50
EAMM-U-60
32 40 50 63 80 100
215 – – – – –
226 254.5 – – – –
For size
Max. load carrying ability
[mm]
[kN]
32 40 50 63 80 100
0.9 1.5 2.5 4 6 9
1)
FL
XC With parallel kit EAMM-U-70 EAMM-U-86 234.5 263 293 – – –
CRC1)
Weight
+
= plus stroke length
L
SR
TG
13 16 16 21 22 27
10 12 12 16 16 20
32.5 38 46.5 56.5 72 89
EAMM-U-110
EAMM-U-145
– – 308.5 322 368 –
– – – 385.5 415.5
– 267.5 297.5 311 – – Part No.
Type
[g] 2 2 2 2 2 2
93 140 234 331 618 865
q174383 q174384 q174385 q174386 q174387 174388
SNC-32 SNC-40 SNC-50 SNC-63 SNC-80 SNC-100
Corrosion resistance class CRC 2 to Festo standard FN 940070 Moderate corrosion stress. Indoor applications in which condensation may occur. External visible parts with primarily decorative requirements for the surface and which are in direct contact with the ambient atmo sphere typical for industrial applications.
Festo core product range
50
2 Electric cylinder ESBF 3 Parallel kit EAMM-U 4 Motor EMME-AS/EMMS-AS
qReady for dispatch from the Festo factory in 24 hours wReady for dispatch in 5 days maximum from stock è Internet: www.festo.com/catalogue/...
Subject to change – 2017/03
Electric cylinders ESBF, with spindle drive Accessories CRSNCS 63 … 80: Stainless steel casting SNCS-…-R3 100: Wrought aluminium alloy with protective coating RoHS-compliant
Material: SNCS 63 … 80: Die-cast aluminium SNCS 100: Wrought aluminium alloy
Swivel flange SNCS/CRSNCS/SNCS-…-R3
2 Electric cylinder ESBF 3 Parallel kit EAMM-U Dimensions and ordering data For size CN [mm] ESBF-… ESBF-…-R3 32 40 50 63 80 100
10+0.013 12+0.015 16+0.015 16+0.015 20+0.018 20+0.018
For size
10+0.015/–0.04 12+0.018/–0.04 16+0.018/–0.04 16+0.018/–0.04 20+0.021/–0.04 20+0.021/–0.04
E ESBF-… 45+0.2/–0.5 54–0.5 64–0.6 75–0.6 93–0.8 109 +1/–0.7
RA +1 ESBF-…
ESBF-…-R3
32 40 50 63 80 100
14.5 17.5 18.5 23 25 95
14.5 17.5 19 23 25 100
32.5 38 46.5 56.5 72 89
[mm]
Max. load SNCS… carrying ability CRC1) [kN]
Weight [g]
32 40 50 63 80 100
1 1.5 2.5 4 6 9
86 122 216 281 557 683
1)
EP ESBF-…-R3 45+0.2/–0.5 54–0.5 64–0.6 75–0.6 93–0.6 109 –0.8
EX
10.5 12 15 15 18 18
14 16 21 21 25 25
2 2 2 2 2 2
EAMM-U-50
EAMM-U-60
215 – – – – –
226 254.5 – – – –
Part No. q174397 q174398 q174399 q174400 q174401 174402
FL
±0.2
TG
[mm]
For size
4 Motor EMME-AS/EMMS-AS + = plus stroke length
LT
±0.2
ESBF-…
ESBF-…-R3
22 25 27 32 36 41
15+0.5
15+0.5 17+0.5 20+0.5 22+0.5 27+0.5 30±0.5
13 16 16 21 22 27
XC With parallel kit EAMM-U-70 EAMM-U-86 234.5 263 293 – – –
MS
– 267.5 297.5 311 – –
17+0.5 20+0.5 23–0.5 28–0.5 30±0.5
EAMM-U-110
EAMM-U-145
– – 308.5 322 368 –
– – – – 385.5 415.5
Type
High corrosion protection CRC1) Weight [g]
Part No.
Type
SNCS-32 SNCS-40 SNCS-50 SNCS-63 SNCS-80 SNCS-100
4 4 4 4 4 3
2895920 2895921 2895922 2895923 2895924 2895925
CRSNCS-32 CRSNCS-40 CRSNCS-50 CRSNCS-63 CRSNCS-80 SNCS-100-R3
161 239 403 576 1173 684
Corrosion resistance class CRC 2 to Festo standard FN 940070 Moderate corrosion stress. Indoor applications in which condensation may occur. External visible parts with primarily decorative requirements for the surface and which are in direct contact with the ambient atmo sphere typical for industrial applications.
Festo core product range
2017/03 – Subject to change
qReady for dispatch from the Festo factory in 24 hours wReady for dispatch in 5 days maximum from stock è Internet: www.festo.com/catalogue/...
51
Electric cylinders ESBF, with spindle drive Accessories Materials: Die-cast aluminium
Swivel flange SNCL
Free of copper and PTFE RoHS compliant
2 Electric cylinder ESBF 3 Parallel kit EAMM-U Dimensions and ordering data For size CD [mm] H9 32 40 50 63 80 100
10 12 12 16 16 20
E
45+0.2/–0.5 54–0.5 64–0.6 75–0.6 93–0.8 110+0.3/–0.8
For size [mm]
EAMM-U-50
EAMM-U-60
32 40 50 63 80 100
215 – – – – –
226 254.5 – – – –
For size
Max. load carrying ability
[mm]
[kN]
32 40 50 63 80 100
0.9 1.5 2.5 4 6 9
1)
EW
FL
–0.2/–0.6
±0.2
26 28 32 40 50 60
22 25 27 32 36 41 XC With parallel kit EAMM-U-70 EAMM-U-86 234.5 263 293 – – –
CRC1)
Weight
L
MR
TG
13 16 16 21 22 27
10 12 12 16 16 20
32.5 38 46.5 56.5 72 89
EAMM-U-110
EAMM-U-145
– – 308.5 322 368 –
– – – 385.5 415.5
– 267.5 297.5 311 – – Part No.
Type
[g] 2 2 2 2 2 2
71 95 158 225 436 606
q174404 q174405 q174406 q174407 q174408 174409
SNCL-32 SNCL-40 SNCL-50 SNCL-63 SNCL-80 SNCL-100
Corrosion resistance class CRC 2 to Festo standard FN 940070 Moderate corrosion stress. Indoor applications in which condensation may occur. External visible parts with primarily decorative requirements for the surface and which are in direct contact with the ambient atmo sphere typical for industrial applications.
Festo core product range
52
4 Motor EMME-AS/EMMS-AS + = plus stroke length
qReady for dispatch from the Festo factory in 24 hours wReady for dispatch in 5 days maximum from stock è Internet: www.festo.com/catalogue/...
Subject to change – 2017/03
Electric cylinders ESBF, with spindle drive Accessories Materials: SNCB: Die-cast aluminium SNCB-…-R3: Die-cast aluminium with protective coating, high corrosion protection
Swivel flange SNCB/SNCB-…-R3
Free of copper and PTFE RoHS compliant
2 Electric cylinder ESBF 3 Parallel kit EAMM-U Dimensions and ordering data For size CB [mm]
H14
32 40 50 63 80 100
26 28 32 40 50 60
E
EK e8
±0.2
45+0.2/–0.5 54–0.5 64–0.6 75–0.6 93–0.8 110+0.3/–0.8
10 12 12 16 16 20
22 25 27 32 36 41
For size [mm]
EAMM-U-50
EAMM-U-60
32 40 50 63 80 100
215 – – – – –
226 254.5 – – – –
For size
ESBF-… CRC1)
[mm]
Max. load carrying ability [kN]
32 40 50 63 80 100
1 1.5 2.5 4 6 9
2 2 2 2 2 2
1)
4 Motor EMME-AS/EMMS-AS + = plus stroke length
Weight [g] 103 155 232 375 636 1035
FL
L
MR
q174390 q174391 q174392 q174393 q174394 174395
H14
8.5 12 12 16 16 20
XC With parallel kit EAMM-U-70 EAMM-U-86
Part No.
UB
–0.5 13 16 16 21 22 27
234.5 263 293 – – –
TG
32.5 38 46.5 56.5 72 89
45 52 60 70 90 110
EAMM-U-110
EAMM-U-145
– – 308.5 322 368 –
– – – – 385.5 415.5
– 267.5 297.5 311 – –
Type
ESBF-…-R3 CRC1) Weight [g]
Part No.
Type
SNCB-32 SNCB-40 SNCB-50 SNCB-63 SNCB-80 SNCB-100
3 3 3 3 3 3
176944 176945 176946 176947 176948 176949
SNCB-32-R3 SNCB-40-R3 SNCB-50-R3 SNCB-63-R3 SNCB-80-R3 SNCB-100-R3
100 151 228 371 632 986
Corrosion resistance class CRC 2 to Festo standard FN 940070 Moderate corrosion stress. Indoor applications in which condensation may occur. External visible parts with primarily decorative requirements for the surface and which are in direct contact with the ambient atmo sphere typical for industrial applications. Corrosion resistance class CRC 3 to Festo standard FN 940070 High corrosion stress. Outdoor exposure under moderate corrosive conditions. External visible parts with primarily functional requirements for the surface and which are in direct contact with a normal industrial environment.
Festo core product range
2017/03 – Subject to change
qReady for dispatch from the Festo factory in 24 hours wReady for dispatch in 5 days maximum from stock è Internet: www.festo.com/catalogue/...
53
Electric cylinders ESBF, with spindle drive Accessories Trunnion mounting kit DAMT
Materials: Galvanised steel
The kit can be mounted at any posi tion along the cylinder profile barrel. The trunnion mounting kit cannot be
mounted in the vicinity of the motor when used in combination with the parallel kit EAMM-U.
Free of copper and PTFE RoHS compliant
1 Max. tightening torque 2 Electric cylinder ESBF Dimensions and ordering data For size B1
C3
TD e9
TL
TM
UW
XG
86 105 117 136 156 189
12 16 16 20 20 25
12 16 16 20 20 25
50 63 75 90 110 132
65 75 95 105 130 145
66 75.5 83.5 90.5 107 114
32 40 50 63 80 100
30 32 34 41 44 48
71 87 99 116 136 164
For size
XJ
XV
107.5 127.5 152.5 154.5 189 212
86.8 101.5 118 122.5 148 163
[mm]
1)
Max. tightening torque [Nm]
Max. load carrying ability [kN]
CRC1)
4+1 8+1 8+2 18+2 28+2 28+2
0.9 1.5 2.5 4 6 9
1 1 1 1 1 1
Weight
Part No.
Type
[g] 212.7 387.5 607.6 910.5 1493.7 2094.8
q2213233 q2214899 q2214909 q2214971 q163529 163530
DAMT-V1-32-A DAMT-V1-40-A DAMT-V1-50-A DAMT-V1-63-A DAMT-V1-80-A DAMT-V1-100-A
Corrosion resistance class CRC 1 to Festo standard FN 940070 Low corrosion stress. For dry indoor applications or transport and storage protection. Also applies to parts behind covers, in the non-visible interior area, and parts which are covered in the application (e.g. drive trunnions).
Festo core product range
54
+ = plus stroke length +½ = plus stroke length
C2
[mm]
32 40 50 63 80 100
3 Axial kit EAMM-A
qReady for dispatch from the Festo factory in 24 hours wReady for dispatch in 5 days maximum from stock è Internet: www.festo.com/catalogue/...
Subject to change – 2017/03
Electric cylinders ESBF, with spindle drive Accessories Ordering data – Mounting attachments Designation For size Max. load carrying ability [kN]
Part No.
Type
Clevis foot LNG
Designation
For size
Technical data è Internet: clevis foot Max. load Part No. Type carrying ability [kN]
Clevis foot LSN 32 40 50 63 80 100
0.9 1.5 2.5 4 6 9
q33890 q33891 q33892 q33893 q33894 33895
32 40 50 63 80 100
0.9 1.5 2.5 4 6 9
31740 31741 31742 31743 31744 31745
32 40 50 63 80 100
0.9 1.5 2.5 4 6 9
31761 31762 31763 31764 31765 31766
32 40 50 63 80 100
0.9 1.5 2.5 4 6 9
5561 5562 5563 5564 5565 5566
LSN-32 LSN-40 LSN-50 LSN-63 LSN-80 LSN-100
LSNG-32 LSNG-40 LSNG-50 LSNG-63 LSNG-80 LSNG-100
Clevis foot LSNSG 32 40 50 63 80 100
0.9 1.5 2.5 4 6 9
31747 31748 31749 31750 31751 31752
LSNSG-32 LSNSG-40 LSNSG-50 LSNSG-63 LSNSG-80 LSNSG-100
LBG-32 LBG-40 LBG-50 LBG-63 LBG-80 LBG-100
Right-angle clevis foot LQG 32 40 50 63 80 100
0.9 1.5 2.5 4 6 9
31768 31769 31770 31771 31772 31773
LQG-32 LQG-40 LQG-50 LQG-63 LQG-80 LQG-100
LNG-32 LNG-40 LNG-50 LNG-63 LNG-80 LNG-100
Clevis foot LSNG
Clevis foot LBG
Ordering data – Mounting attachments, corrosion-resistant Designation For size Clevis foot CRLNG 32 40 50 63 80 100
Max. load carrying ability [kN] 0.9 1.5 2.5 4 6 9
Technical data è Internet: clevis foot Part No. Type
161840 161841 161842 161843 161844 161845
Ordering data – Mounting attachments, high corrosion protection Designation For size Max. load carrying ability [kN]
CRLNG-32 CRLNG-40 CRLNG-50 CRLNG-63 CRLNG-80 CRLNG-100
Technical data è Internet: clevis foot Part No. Type
Clevis foot LBG 32 40 50 63 80 100
Festo core product range
2017/03 – Subject to change
0.9 1.5 2.5 4 6 9
2078790 2078792 2078794 2078795 2078797 2078799
LBG-32-R3 LBG-40-R3 LBG-50-R3 LBG-63-R3 LBG-80-R3 LBG-100-R3
qReady for dispatch from the Festo factory in 24 hours wReady for dispatch in 5 days maximum from stock è Internet: www.festo.com/catalogue/...
55
Electric cylinders ESBF, with spindle drive Accessories Ordering data – Piston-rod attachments Designation For size Max. load carrying ability [kN]
Part No.
Type
Rod eye SGS
For size
Technical data è Internet: piston-rod attachment Max. load Part No. Type carrying ability [kN]
Rod clevis SGA 32 40 50, 63 80, 100
0.9 1.5 4 9
q9261 q9262 q9263 q9264
SGS-M10x1,25 SGS-M12x1,25 SGS-M16x1,5 SGS-M20x1,5
32 40 50, 63 80, 100
0.9 1.5 4 9
q6144 q6145 q6146 q6147
SG-M10x1,25 SG-M12x1,25 SG-M16x1,5 SG-M20x1,5
Coupling piece KSZ 32 40 50, 63 80, 100
0.9 1.5 4 9
Rod clevis SG
36125 36126 36127 36128
32 40 50, 63 80, 100
0.9 1.5 4 9
Self-aligning rod coupler FK 32 0.9 40 1.5 50, 63 4 80, 100 9
32954 10767 10768 10769
q6140 q6141 q6142 q6143
SGA-M10x1,25 SGA-M12x1,25 SGA-M16x1,5 SGA-M20x1,5
FK-M10x1,25 FK-M12x1,25 FK-M16x1,5 FK-M20x1,5
KSZ-M10x1,25 KSZ-M12x1,25 KSZ-M16x1,5 KSZ-M20x1,5
Ordering data – Piston-rod attachments, corrosion-resistant Designation For size Max. load Part No. Type carrying ability [kN] Rod eye CRSGS
Designation
For size
Technical data è Internet: piston-rod attachment Max. load Part No. Type carrying ability [kN]
Rod clevis CRSG 32 40 50, 63 80, 100
0.9 1.5 4 9
Self-aligning rod coupler CRFK 32 0.9 40 1.5 50, 63 4 80.10 9
Festo core product range
56
Designation
195582 195583 195584 195585
CRSGS-M10x1,25 CRSGS-M12x1,25 CRSGS-M16x1,5 CRSGS-M20x1,5
2305778 2305779 2490673 2545677
CRFK-M10x1,25 CRFK-M12x1,25 CRFK-M16x1,5 CRFK-M20x1,5
32 40 50, 63 80, 100
0.9 1.5 4 9
13569 13570 13571 13572
CRSG-M10x1,25 CRSG-M12x1,25 CRSG-M16x1,5 CRSG-M20x1,5
qReady for dispatch from the Festo factory in 24 hours wReady for dispatch in 5 days maximum from stock è Internet: www.festo.com/catalogue/...
Subject to change – 2017/03
Electric cylinders ESBF, with spindle drive Accessories Ordering data – Guide units Stroke [mm]
-H-
Technical data è Internet: eagf Part No.
Type
Stroke [mm]
Part No.
Type
For size 32 10 … 100 10 … 200 10 … 320 10 … 400 1 … 500
w2782679 w2782818 w2782885 w2782923 w3038083
EAGF-V2-KF-32-100 EAGF-V2-KF-32-200 EAGF-V2-KF-32-320 EAGF-V2-KF-32-400 EAGF-V2-KF-32-
For size 40 10 … 100 10 … 200 10 … 320 10 … 400 1 … 500
w2782939 w2782976 w2783047 w2783080 w3038089
EAGF-V2-KF-40-100 EAGF-V2-KF-40-200 EAGF-V2-KF-40-320 EAGF-V2-KF-40-400 EAGF-V2-KF-40-
For size 50 10 … 100 10 … 200 10 … 320 10 … 400 1 … 500
w2783639 w2784152 w2784164 w2784184 w3038094
EAGF-V2-KF-50-100 EAGF-V2-KF-50-200 EAGF-V2-KF-50-320 EAGF-V2-KF-50-400 EAGF-V2-KF-50-
For size 63 10 … 100 10 … 200 10 … 320 10 … 400 1 … 500
w1725842 w1725843 w1725844 w1725845 w2608521
EAGF-V2-KF-63-100 EAGF-V2-KF-63-200 EAGF-V2-KF-63-320 EAGF-V2-KF-63-400 EAGF-V2-KF-63-
For size 80 10 … 100 10 … 200 10 … 320 10 … 400 1 … 500
1725846 1725847 1725848 1725849 2608528
EAGF-V2-KF-80-100 EAGF-V2-KF-80-200 EAGF-V2-KF-80-320 EAGF-V2-KF-80-400 EAGF-V2-KF-80-
For size 100 10 … 100 10 … 200 10 … 320 10 … 400 1 … 500
1725850 1725851 1725852 1725853 2608532
EAGF-V2-KF-100-100 EAGF-V2-KF-100-200 EAGF-V2-KF-100-320 EAGF-V2-KF-100-400 EAGF-V2-KF-100-
Note
The length of the guide unit must be correspondingly longer for cylinders with piston rod extensions.
Festo core product range
2017/03 – Subject to change
qReady for dispatch from the Festo factory in 24 hours wReady for dispatch in 5 days maximum from stock è Internet: www.festo.com/catalogue/...
57
Electric cylinders ESBF, with spindle drive Accessories Sensor mounting The sensor mountings can only be attached within the highlighted area due to the asymmetry of the internal magnets.
The proximity sensors may not switch reliably if they are mounted outside of this area.
L3
Size
L1
L2
L3
32 40 50 63 80 100
26 30 30 33 39 39
48 65 84 99 132 151
22.3 26.5 31.5 37 46 54.5
Ordering data – Sensor mounting for T-slot For Description
Length [mm]
Part No.
Type
50 100
1600093 1600118
SAMH-N8-SR-50 SAMH-N8-SR-100
Sensor rail 32 … 100
For proximity sensor SMT/CRSMT-8 The sensor rail is glued onto the cylinder
32 … 100
For proximity sensor SMT/CRSMT-8 35 The overall length corresponds to the length of the sens ing range plus an adjustment range of approx. 10 mm for the proximity sensors The kit is glued onto the cylinder
525565
CRSMB-8-32/100
32, 40 50, 63 80, 100
For proximity sensor SMT/CRSMT-8 The kit is fastened to the profile by means of two screws
175705 175706 175707
SMB-8-FENG-32/40 SMB-8-FENG-50/63 SMB-8-FENG-80/100
Mounting kit
Mounting kit
58
è Internet: www.festo.com/catalogue/...
27
Subject to change – 2017/03
Electric cylinders ESBF, with spindle drive Accessories Technical data è Internet: smt
Ordering data – Proximity sensor for T-slot, magneto-resistive Type of mounting Switching Electrical connection output
Cable length [m]
Part No.
Type
N/O contact Insertable in the slot from PNP above, flush with the mounting kit, short design NPN
Cable, 3-wire Plug M8x1, 3-pin Plug M12x1, 3-pin Cable, 3-wire Plug M8x1, 3-pin
2.5 0.3 0.3 2.5 0.3
q574335 q574334 q574337 q574338 q574339
SMT-8M-A-PS-24V-E-2,5-OE SMT-8M-A-PS-24V-E-0,3-M8D SMT-8M-A-PS-24V-E-0,3-M12 SMT-8M-A-NS-24V-E-2,5-OE SMT-8M-A-NS-24V-E-0,3-M8D
Insertable in the slot from PNP above, flush with the mounting kit, short design
Cable, 3-wire
7.5
q574340
SMT-8M-A-PO-24V-E-7,5-OE
N/C contact
Cable length [m]
Part No.
Technical data è Internet: crsmt Type
5 0.3 0.3
574380 574382 574383
CRSMT-8M-PS-24V-K-5,0-OE CRSMT-8M-PS-24V-K-0,3-M12 CRSMT-8M-PS-24V-K-0,3-M8D
Electrical connection, right
Cable length [m]
Part No.
Technical data è Internet: nebu Type
Straight socket, M8x1, 3-pin
Cable, open end, 3-wire
Straight socket, M12x1, 5-pin
Cable, open end, 3-wire
Angled socket, M8x1, 3-pin
Cable, open end, 3-wire
Angled socket, M12x1, 5-pin
Cable, open end, 3-wire
2.5 5 2.5 5 2.5 5 2.5 5
Ordering data – Proximity sensor for T-slot, magneto-resistive, corrosion resistant Type of mounting Switching Electrical connection output N/O contact Insertable in the slot from above, flush with the mounting kit
PNP
Ordering data – Connecting cables Electrical connection, left
Ordering data – Blanking screws, corrosion-resistant For Material
Cable, 3-wire Plug connector M12x1, 3-pin Plug connector M8x1, 3-pin
CRC1)
Weight
q541333 q541334 q541363 q541364 q541338 q541341 541367 541370
NEBU-M8G3-K-2.5-LE3 NEBU-M8G3-K-5-LE3 NEBU-M12G5-K-2.5-LE3 NEBU-M12G5-K-5-LE3 NEBU-M8W3-K-2.5-LE3 NEBU-M8W3-K-5-LE3 NEBU-M12W5-K-2.5-LE3 NEBU-M12W5-K-5-LE3
Part No.
Type
PU2)
1355016 650121 1355026
DAMD-PS-M6-12-R1 DAMD-PS-M8-16-R1 DAMD-PS-M10-16-R1
4
[g] 32, 40 50, 63 80, 100 1)
2)
High-alloy steel
3 3 3
6.5 17.5 23
Corrosion resistance class CRC 3 to Festo standard FN 940070 High corrosion stress. Outdoor exposure under moderate corrosive conditions. External visible parts with primarily functional requirements for the surface and which are in direct contact with a normal industrial environment. Packaging unit
Festo core product range
2017/03 – Subject to change
qReady for dispatch from the Festo factory in 24 hours wReady for dispatch in 5 days maximum from stock è Internet: www.festo.com/catalogue/...
59
q/w
Festo core product range Covers 80% of your automation tasks
Worldwide: Superb: Easy:
Always in stock Festo quality at an attractive price Reduces procurement and storing complexity
qReady for dispatch from the Festo factory in 24 hours Held in stock in 13 service centres worldwide More than 2200 products wReady for dispatch in 5 days maximum from stock Assembled for you in 4 service centres worldwide Up to 6 x 1012 variants per product series
Look for the star!
Electric cylinders ESBF, with spindle drive Key features At a glance The electric cylinder ESBF is a mech anical linear drive unit with piston rod. The driving component consists of an electrically actuated spindle that converts the rotary motion of the motor into a linear motion of the piston rod.
The electric cylinder is based on the ISO 15552 standard. The mechanical interfaces are largely compatible with the standards-based cylinder DSBF.
Two spindle types to choose from: Size 32 … 50: – Ball screw (BS) – Lead screw (LS) Size 63 … 100: – Ball screw (BS)
Complete system consisting of electric cylinder, motor and motor mounting kit Electric cylinder
Options: High corrosion protection Degree of protection IP65 Piston rod extension NSF-H1 lubricant for food & beverage applications Wide range of accessories
è page 4
è page 25
Motor
-H-
Note
A range of specially adapted complete solutions is available for the electric cylinder ESBF and the motors. Motor mounting kit Axial kit
è page 25 Parallel kit Complete kits are available for both parallel and axial motor mounting.
è page 38
Protective bellows kit EADB for use in dusty environments The protective bellows kit is a leakfree system. To prevent unwanted media from being drawn in, the supply and exhaust air for the kit must be ducted via a pressure compensation hole in the connection part 1. The kit protects the piston rod, seal
1
2
è Internet: www.festo.com/catalogue/...
and bearings against a wide variety of media, for example: Dust Chippings Oil Grease Petrol
Subject to change – 2017/03
Electric cylinders ESBF, with spindle drive Features and type codes è page 24
Degree of protection IP65 (feature S1) for use in wet environments The electric cylinder to IP65 fulfils the specifications to IEC 60 529. Air is exchanged between the interior of the cylinder and the environment via a pressure compensation hole 1. This prevents negative pressure or excess pressure arising in the interior of the cylinder.
1
It also prevents unwanted media being drawn in. Sealing air can also be applied to the pressure compensation hole if needed (e.g. during a cleaning process).
NSF-H1 lubricant for food & beverage applications (feature F1) The electric cylinder is of limited suitability for the food industry. Can only be selected in combination with the ball screw (BS) drive system.
NSF-H1 lubricant for piston rod, screw spindle and other parts.
Further information on materials www.festo.com/sp è technical hotline
Type codes ESBF
—
BS
—
63
—
100
—
5P
—
F
Type ESBF
Electric cylinder
Drive system BS LS
Ball screw Lead screw
Size Stroke [mm] Spindle pitch [mm/rev] Variant F S1 R3 F1 …E
Female thread Degree of protection IP65 High corrosion protection Suitable for use in the food industry as per extended information on materials Piston rod extension
2017/03 – Subject to change
è Internet: www.festo.com/catalogue/...
3
Electric cylinders ESBF, with spindle drive Peripherals overview
1 8
2
aJ 9
3
aA
4
7 5
9 aB
6
bD
bD
bF
bE
bH
7
cJ bI
bG
8
aF bB
aG aH
aI
aC
bC
bJ aD bA
aA
-H-
Note
The maximum load carrying ability of the mounting parts must be greater than the maximum occurring load. The weight of the cylinder including the motor must be factored in. aE Mounting components and accessories Description 1 2 3 4 5
1)
4
Swivel flange DAMS Foot mounting HNC/CRHNC Trunnion flange ZNCF/CRZNG Swivel flange SNC Swivel flange SNCS/CRSNCS/SNCS-…-R3
With parallel motor mounting, for spherical bearing For mounting the cylinder. The foot mounting can only be secured at the rear, on the parallel kit For spherical bearing With parallel motor mounting With parallel motor mounting
Suitable for high forces1) n – – – –
è Page/Internet 49 44 46 50 51
Shows which accessories can be used within the entire force range. For restricted force ranges see the relevant accessory part, from page 44.
è Internet: www.festo.com/catalogue/...
Subject to change – 2017/03
Electric cylinders ESBF, with spindle drive Peripherals overview Mounting components and accessories Description 6 7 8 9 aJ aA aB aC aD aE aF
aG aH aI bJ bA bB bC
bD bE bF bG bH bI cJ
1)
Swivel flange SNCL Swivel flange SNCB/SNCB-…-R3 Trunnion support LNZG/CRLNZG Clevis foot LSNG Clevis foot LSNSG Clevis foot LBG/LBG-…-R3 Clevis foot LNG/CRLNG Right-angle clevis foot LQG Rod clevis SGA Guide unit EAGF Protective bellows kit EADB
Rod eye SGS/CRSGS Coupling piece KSZ Rod clevis SG/CRSG Self-aligning rod coupler FK/CRFK Flange mounting EAHH Trunnion mounting kit DAMT Profile mounting EAHF-…-P Proximity sensor SMT/CRSMT-8 Mounting kit CRSMB Sensor rail SAMH Blanking screw DAMD-PS Parallel kit EAMM-U Axial kit EAMM-A Mounting kit SMB-8-FENG
Suitable for high forces1)
With parallel motor mounting
–
With parallel motor mounting, for spherical bearing For cylinders with trunnion mounting
– –
With parallel motor mounting, with spherical bearing With parallel motor mounting, weld-on, with spherical bearing With parallel motor mounting, for spherical bearing With parallel motor mounting
– – – –
For rod eye SGS
–
è Page/Internet 52 53 47 55 55 55 55 55
For swivel mounting of cylinders
n
56
– For protecting electric cylinders against rotation at high torque loads – Cannot be used in combination with protective bellows kit EADB – Protects the cylinder (piston rod, seal and bearings) against a wide range of media and thus prevents premature wear – The kit can only be used in combination with an extended piston rod (…E) With spherical bearing
n
57
To compensate for radial deviations
38 n
n –
Permits a swivel motion of the cylinder in one plane For compensating radial and angular misalignments
n –
56 56 56 56
– On the bearing cap – Cannot be used in combination with protective bellows kit EADB For mounting anywhere along the cylinder profile barrel. Cannot be mounted in the vicinity of the motor with parallel motor mounting – For mounting the electric cylinder via the profile – Cannot be mounted in combination with the parallel kit EAMM-U with some combinations (in the vicinity of the motor) For position sensing
n
n
59
For proximity sensor with T-slot
n
58
For proximity sensor with T-slot
n
58
For covering unused mounting threads
n
59
For parallel motor mounting
n
34
For axial motor mounting
n
25
For proximity sensor with T-slot
n
58
–
45 54 43
n
Shows which accessories can be used within the entire force range. For restricted force ranges see the relevant accessory part, from page 44.
2017/03 – Subject to change
è Internet: www.festo.com/catalogue/...
5
Electric cylinders ESBF, with spindle drive Technical data
-N-
Function
-T-W-
Size 32 … 100 Stroke length 30 … 1500 mm www.festo.com
General technical data Size
32
Based on standard Design Piston rod thread Male thread Female thread Working stroke Protection against torsion/guide Duty cycle Position sensing Type of mounting Mounting position
[mm] [%]
32 [mm/rev] 5
Spindle diameter Max. force of the cylinder1) Max. driving torque Max. radial force2) Max. speed Max. rotational speed Max. acceleration Max. angle of rotation at the piston rod3) Reversing backlash3) Repetition accuracy No-load driving torque4)
[mm] [kN] [Nm] [N] [m/s] [rpm] [m/s2] [°] [mm] [mm] [Nm]
Size Spindle pitch
63 [mm/rev] 5
Spindle diameter Max. force of the cylinder1) Max. driving torque Max. radial force2) Max. speed Max. rotational speed Max. acceleration Max. angle of rotation at the piston rod3) Reversing backlash3) Repetition accuracy No-load driving torque4)
[mm] [kN] [Nm] [N] [m/s] [rpm] [m/s2] [°] [mm] [mm] [Nm]
6
50
M10x1.25 M12x1.25 M6 M8 30 … 800 30 … 800 With plain-bearing guide 100 For proximity sensor With female thread/accessories Any
Mechanical data – Ball screw Size Spindle pitch
1) 2) 3) 4)
40
63
ISO 15552 Electric cylinder with ball screw or lead screw
12 1 1.1 115 0.55 6600 5 ±0.25 0.03 ±0.01 0.1
25 7 7 700 0.27 3250 5 ±0.4 0.03 ±0.015 0.4
16 3 3 130 0.4 4800 5 ±0.2 0.03
1 2 1.1 6600 15 0.04
100
Electric cylinder with ball screw
M16x1.5 M10 30 … 1000
40 5
10
80
M16x1.5 M10 30 … 1200
M20x1.5 M12 30 … 1500
50 5
10
16
3 5.6
2.6 7.7
0.8 4800 15
1.2 4500 25
0.03
0.04
0.2
20 5 4.8 300 0.3 3600 5 ±0.15 0.03
M20x1.5 M12 30 … 1500
10
20
5 9.2
4.5 16.3
0.6 3600 15
1.2 3600 25
0.03
0.04
20
40
17 63.7
14.5 102.6
0.67 2010 15
1.34 2010 25
0.03
0.04
0.9
1.0
0.3 80 5
10
25
7 13.1
6 26.5
0.53 3220 15
1.35 3260 25
0.03 ±0.01 0.45
0.04
32 12 11.9 1100 0.21 2530 5 ±0.5 0.03
0.5
0.5
100 5
15
32
12 33.7
10 56.6
0.62 2515 15
1.34 2515 25
0.03
0.04
40 17 16.9 1100 0.16 2010 5 ±0.5 0.03
0.6
0.65
0.7
The pressure force is dependent on the stroke and has an effect on the service life è 10 On the drive shaft In new condition At a spindle speed of 200 rpm
è Internet: www.festo.com/catalogue/...
Subject to change – 2017/03
Electric cylinders ESBF, with spindle drive Technical data Mechanical data – Lead screw Size Spindle pitch
32 [mm/rev] 2.5
40 3
50 4
Spindle diameter Max. force of the cylinder1) Max. driving torque Max. radial force2) Max. speed Max. rotational speed Max. acceleration Max. angle of rotation at the piston rod Reversing backlash3) Repetition accuracy No-load driving torque4)
[mm] [kN] [Nm] [N] [m/s] [rpm] [m/s2] [°] [mm] [mm] [Nm]
16 1 2.4 130 0.05 1000 2.5 ±0.2 0.1
20 1.6 4.8 300 0.05 750 2.5 ±0.15 0.1
0.2
0.3
1) 2) 3) 4)
12 0.6 1.1 115 0.05 1200 2.5 ±0.25 0.1 ±0.05 0.1
Electric cylinder with lead screw can be operated with maximum force over the entire stroke range. On the drive shaft In new condition At a spindle speed of 200 rpm
Weight [g] – Ball screw Size
32
40
50
63
80
100
Basic weight m0 at 0 mm stroke Additional weight m10 per 10 mm stroke Moving mass mb0 at 0 mm stroke Moving mass mb10 per 10 mm stroke
781 33 281 9
1237 47 467 26
1982 65 793 35
3165 87 1831 52
7393 155 5300 103
11123 193 8786 132
Weight [g] – Lead screw Size
32
40
50
Basic weight m0 at 0 mm stroke Additional weight m10 per 10 mm stroke Moving mass mb0 at 0 mm stroke Moving mass mb10 per 10 mm stroke
667 34 198 9
1079 48 317 11
1716 67 532 13
Total weight mges.: mges. + m0 ) m10
Total moving mass mbges.: stroke 10
2017/03 – Subject to change
mbges. + mb0 ) mb10
stroke 10
è Internet: www.festo.com/catalogue/...
7
Electric cylinders ESBF, with spindle drive Technical data Operating and environmental conditions Ambient temperature1) [°C] Storage temperature [°C] Degree of protection to IEC 60529 ESBF-… ESBF-…-S1 Relative air humidity [%] Duty cycle [%] Suitable for use in the food industry with ESBF-…-F12) Corrosion resistance class CRC3) ESBF-… ESBF-…-R3 1) 2) 3)
0 … +60 –20 … +60 IP40 IP65 0 … 95 (non-condensing) 100 è extended information on materials 2 3
Note operating range of proximity sensors and motors Extended information on materials on request è technical hotline Only in combination with ESBF-BS-… (ball screw) Corrosion resistance class CRC 2 to Festo standard FN 940070 Moderate corrosion stress. Indoor applications in which condensation may occur. External visible parts with primarily decorative requirements for the surface and which are in direct contact with the ambient atmo sphere typical for industrial applications. Corrosion resistance class CRC 3 to Festo standard FN 940070 High corrosion stress. Outdoor exposure under moderate corrosive conditions. External visible parts with primarily functional requirements for the surface and which are in direct contact with a normal industrial environment.
Mass moment of inertia – Ball screw Size Spindle pitch
32 5
10
40 5
10
16
50 5
10
20
[kg cm2/m] [kg cm2/kg]
0.023 0.122 0.006
0.036 0.139 0.025
0.050 0.46 0.006
0.078 0.48 0.025
0.125 0.523 0.065
0.145 1.019 0.006
0.187 1.043 0.025
0.329 1.139 0.101
Size Spindle pitch
[mm/rev]
63 5
10
25
80 5
15
32
100 5
20
40
J0 at 0 mm stroke JH per meter stroke JL per kg payload
[kg cm2] [kg cm2/m] [kg cm2/kg]
0.491 2.832 0.006
0.486 2.859 0.025
0.65 3.053 0.158
1.529 7.699 0.006
1.648 7.815 0.057
2.119 8.277 0.259
4.696 18.978 0.006
5.050 19.31 0.101
6.71 20.372 0.405
Mass moment of inertia – Lead screw Size Spindle pitch
[mm/rev]
32 2.5
40 3
50 4
J0 at 0 mm stroke JH per meter stroke JL per kg payload
[kg cm2] [kg cm2/m] [kg cm2/kg]
0.016 0.161 0.002
0.045 0.508 0.002
0.141 1.238 0.004
J0 at 0 mm stroke JH per meter stroke JL per kg payload
The mass moment of inertia JA of the electric cylinder is calculated as follows:
8
[mm/rev] [kg cm2]
JA = J0 + jH x working stroke [m] + jL x mpayload [kg]
è Internet: www.festo.com/catalogue/...
Subject to change – 2017/03
Electric cylinders ESBF, with spindle drive Technical data Materials Sectional view 1
2
3
Size 1 2 3 4 5 6 –
Bearing cap Cylinder barrel Piston rod Spindle Spindle nut Drive cover Note on materials
4
5
6
32 … 50
63 … 100
Coated wrought aluminium alloy Smooth anodised wrought aluminium alloy High-alloy stainless steel Rolled steel Rolled steel Coated wrought aluminium alloy RoHS compliant Contains paint-wetting impairment substances
Coated gravity die-cast aluminium
Coated gravity die-cast aluminium
Lateral force Fq as a function of stroke length l Fq
l
ESBF-32 ESBF-40 ESBF-50, 63 ESBF-80, 100
2017/03 – Subject to change
è Internet: www.festo.com/catalogue/...
9
Electric cylinders ESBF, with spindle drive Technical data Max. pressure force F dependent on piston rod length l (I = stroke + optional piston rod extension) F
Due to possible buckling, the pressure force must be limited dependent on the stroke.
For ball screw ESBF-BS-32-…
ESBF-BS-40-…
ESBF-BS-32-…-5P/10P
ESBF-BS-40-…-5P/10P ESBF-BS-40-…-16P
ESBF-BS-50-…
ESBF-BS-63-…
ESBF-BS-50-…-5P/10P ESBF-BS-50-…-20P
10
The tensile force is not affected by this.
ESBF-BS-63-…-5P/10P ESBF-BS-63-…-25P
è Internet: www.festo.com/catalogue/...
Subject to change – 2017/03
Electric cylinders ESBF, with spindle drive Technical data Max. pressure force F dependent on piston rod length l (I = stroke + optional piston rod extension) F
For ball screw ESBF-BS-80-…
ESBF-BS-80-...-5P/15P ESBF-BS-80-...-32P
Due to possible buckling, the pressure force must be limited dependent on the stroke.
The tensile force is not affected by this.
ESBF-BS-100-…
ESBF-BS-100-...-5P/20P ESBF-BS-100-...-40P
For lead screw ESBF-LS-…
ESBF-LS-32 ESBF-LS-40 ESBF-LS-50
2017/03 – Subject to change
è Internet: www.festo.com/catalogue/...
11
Electric cylinders ESBF, with spindle drive Technical data Max. feed speed v as a function of stroke length l For ball screw ESBF-BS-32-…
ESBF-BS-32-…-5P ESBF-BS-32-…-10P
ESBF-BS-40-…-5P ESBF-BS-40-…-10P ESBF-BS-40-…-16P
ESBF-BS-50-…
ESBF-BS-63-…
ESBF-BS-50-…-5P ESBF-BS-50-…-10P ESBF-BS-50-…-20P
ESBF-BS-63-…-5P ESBF-BS-63-…-10P ESBF-BS-63-…-25P
ESBF-BS-80-…
ESBF-BS-100-…
ESBF-BS-80-…-5P ESBF-BS-80-…-15P ESBF-BS-80-…-32P
12
ESBF-BS-40-…
ESBF-BS-100-…-5P ESBF-BS-100-…-20P ESBF-BS-100-…-40P
è Internet: www.festo.com/catalogue/...
Subject to change – 2017/03
Electric cylinders ESBF, with spindle drive Technical data Maximum feed force F dependent on the feed speed v For ball screw ESBF-BS-32-…
ESBF-32-…-5P ESBF-32-…-10P
ESBF-BS-50-…
ESBF-50-…-5P ESBF-50-…-10P ESBF-50-…-20P ESBF-BS-80-…
ESBF-BS-80-…-5P ESBF-BS-80-…-15P ESBF-BS-80-…-32P
2017/03 – Subject to change
ESBF-BS-40-…
ESBF-40-…-5P ESBF-40-…-10P ESBF-40-…-16P ESBF-BS-63-…
ESBF-BS-63-…-5P ESBF-BS-63-…-10P ESBF-BS-63-…-25P ESBF-BS-100-…
ESBF-BS-100-…-5P ESBF-BS-100-…-20P ESBF-BS-100-…-40P
è Internet: www.festo.com/catalogue/...
13
Electric cylinders ESBF, with spindle drive Technical data Maximum feed force F dependent on the feed speed v For lead screw ESBF-LS-…
ESBF-LS-32 ESBF-LS-40 ESBF-LS-50 Service life The service life of the electric cylin der depends largely on that of the lead screw. The operating coeffi cient plays a considerable role in determining the possible service life and it can be determined with the help of the table (è 15)
The operating coefficient for the variant ESBF-…-F1 (NSF-H1 lubricant for food & beverage applications) matches that for the standard type
The service life ends when the maximum number of switching cycles or maximum running performance has been reached: – ESBFBS: 10 million – ESBFLS: è 15 (below) The distance between the foremost and rearmost positions must be at least 2.5 times the spindle pitch per travel cycle.
The specifications for running performance are based on experimentally determined and theoretically calculated data (at room temperature). The running performance that can be achieved in practice can deviate considerably from the specified curves under different parameters
Calculation of the mean feed force Fxm with ball screw (ESBF-BS)
Ǹ
F x1
3
s 1 ) AAA ) F n s1 ) AAA ) sn
3
Fx1
sn
Fxmax Fx3
Fxm = Mean feed force Fx1/n = Feed force of section s1/n = Share of movement cycle that is travel
Fx [N]
F xm +3
Fxm
Fx2
s1
s2 s [100%]
s3
Mean feed force Fxm as a function of running performance L, with an operating coefficient fB of 1.0 at room temperature For ball screw ESBF-BS-32-… ESBF-BS-40-…
ESBF-32-…-5P ESBF-32-…-10P
14
ESBF-40-…-5P ESBF-40-…-10P ESBF-40-…-16P
è Internet: www.festo.com/catalogue/...
Subject to change – 2017/03
Electric cylinders ESBF, with spindle drive Technical data Service life Mean feed force Fxm as a function of running performance L, with an operating coefficient fB of 1.0 at room temperature For ball screw ESBF-BS-50-… ESBF-BS-63-…
ESBF-50-…-5P ESBF-50-…-10P ESBF-50-…-20P
ESBF-BS-63-…-5P ESBF-BS-63-…-10P ESBF-BS-63-…-25P
ESBF-BS-80-…
ESBF-BS-100-…
ESBF-BS-80-…-5P ESBF-BS-80-…-15P ESBF-BS-80-…-32P
ESBF-BS-100-…-5P ESBF-BS-100-…-20P ESBF-BS-100-…-40P
Life cycle taking into account the operating coefficient List + L3 fB List L
= Actual service life = Target service life (è graphs) = Operating coefficient
fB
Load1)
Operating coefficient fB
Sample application
None Lightweight Medium High
1.0 … 1.2 1.2 … 1.4 1.4 … 1.6 1.6 … 2.0
Measuring machine Handling, robot technology Press-in operations Construction, agriculture
1)
This refers to loads caused by impacts, temperatures, contamination, shock and vibrations that affect the cylinder or piston rod.
Reference values for lead screw (ESBF-LS) Size Running performance L Stress cycles L1) Switching cycles L2) 1) 2)
[km] [million] [million]
32
40
50
200 1.0 0.5
250 1.2 0.6
300 1.4 0.7
Movement from position A to B with acceleration and deceleration to stop. Two stress cycles to get back to the starting point.
2017/03 – Subject to change
è Internet: www.festo.com/catalogue/...
15
Electric cylinders ESBF, with spindle drive Technical data Friction losses and driving torque Friction losses The friction losses comprise the no-load driving torque and the speeddependent friction losses.
Mreib + Mleerlauf ) MV
Mreib = Friction torque Mleerlauf = No-load driving torque MV = Friction torque dependent on the feed speed
Mantrieb + Mreib ) Mnutz
Mantrieb = Required driving torque Mreib = Friction torque Mnutz = Effective torque
Driving torque The driving torque required for the cylinder comprises the friction torque and the effective torque. No-load driving torque – Ball screw1) Size Spindle pitch
32 [mm/rev] 5
10
40 5
10
16
50 5
10
20
No-load driving torque Mleerlauf
[Nm]
0.1
0.2
0.2
0.2
0.3
0.3
0.3
Size Spindle pitch
63 [mm/rev] 5
10
25
80 5
15
32
100 5
20
40
No-load driving torque Mleerlauf
[Nm]
0.45
0.5
0.5
0.6
0.65
0.7
0.9
1.0
No-load driving torque – Lead screw1) Size Spindle pitch
32 [mm/rev] 2.5
40 3
50 4
No-load driving torque Mleerlauf
[Nm]
0.2
0.3
1)
16
0.1
0.4
0.1
Corresponds to the required driving torque without load, at a spindle speed of 200 rpm.
è Internet: www.festo.com/catalogue/...
Subject to change – 2017/03
Electric cylinders ESBF, with spindle drive Technical data Friction torque MV as a function of feed speed v For ball screw ESBF-BS-32-…
ESBF-BS-32-…-5P ESBF-BS-32-…-5P
ESBF-BS-50-…
ESBF-BS-50-…-5P ESBF-BS-50-…-10P ESBF-BS-50-…-20P ESBF-BS-80-…
ESBF-BS-80-…-5P ESBF-BS-80-…-15P ESBF-BS-80-…-32P
2017/03 – Subject to change
ESBF-BS-40-…
ESBF-BS-40-…-5P ESBF-BS-40-…-10P ESBF-BS-40-…-16P ESBF-BS-63-…
ESBF-BS-63-…-5P ESBF-BS-63-…-10P ESBF-BS-63-…-25P ESBF-BS-100-…
ESBF-BS-100-…-5P ESBF-BS-100-…-20P ESBF-BS-100-…-40P
è Internet: www.festo.com/catalogue/...
17
Electric cylinders ESBF, with spindle drive Technical data Friction torque MV as a function of feed speed v For lead screw ESBF-LS-…
ESBF-LS-32 ESBF-LS-40 ESBF-LS-50
Effective torque Mnutz as a function of feed force F For ball screw ESBF-BS-32-…
ESBF-BS-32-…-5P ESBF-BS-32-…-10P
ESBF-BS-40-…-5P ESBF-BS-40-…-10P ESBF-BS-40-…-16P
ESBF-BS-50-…
ESBF-BS-63-…
ESBF-BS-50-…-5P ESBF-BS-50-…-10P ESBF-BS-50-…-20P
18
ESBF-BS-40-…
ESBF-BS-63-…-5P ESBF-BS-63-…-10P ESBF-BS-63-…-25P
è Internet: www.festo.com/catalogue/...
Subject to change – 2017/03
Electric cylinders ESBF, with spindle drive Technical data Effective torque Mnutz as a function of feed force F For ball screw ESBF-BS-80-…
ESBF-BS-80-…-5P ESBF-BS-80-…-15P ESBF-BS-80-…-32P
ESBF-BS-100-…
ESBF-BS-100-…-5P ESBF-BS-100-…-20P ESBF-BS-100-…-40P
For lead screw ESBF-LS-…
ESBF-LS-32 ESBF-LS-40 ESBF-LS-50
2017/03 – Subject to change
è Internet: www.festo.com/catalogue/...
19
Electric cylinders ESBF, with spindle drive Technical data Download CAD data è www.festo.com
Dimensions
+
= plus stroke length
Size
AM –0.5
B d11
[mm] 32 40 50 63 80 100
22 24 32 32 40 40
34 39 45 52 60 70
Size
G1
25.5–0.1 30–0.1 34–0.1 330.1 390.1 390.1
BG
D2 H6
D3 f7
E
G
Min.
D1 H9
16 16 17 17 17 17
20 24 28 32 40 50
6 8 12 12 19 24
32 40 50 60 80 100
45+0.5 54+0.5 64+0.5 75+0.5/–0.1 93+0.5/–0.1 110 +0.5/–0.1
25.5–0.1 30–0.1 30–0.1 330.1 390.1 390.1
L1
L2
L3
L4
L5
KK
0.2
Min.
MM –0.1
12+0.2 14+0.2 20+0.2 21–0.5 28–0.5 33–0.5
122.5 +0.2/–1.4 144 +0.2/–1.4 163 +0.2/–1.4 171 +0.7/–1.2 204 +0.7/–1.2 224 +0.7/–1.2
15.9+0.8/–0.3 18.4+0.8/–0.3 27+0.8/–0.3 23.50.5 33.50.5 39.50.5
8 14 17 17 26 30
4 4 5 5 25.9 25.9
M10x1.25 M12x1.25 M16x1.5 M16x1.5 M20x1.5 M20x1.5
14 16 20 20 25 25
[mm] 32 40 50 63 80 100 Size
RT
TG
VA
VD
WH
ZJ
ß1
ß2
ß3
M6 M6 M8 M8 M10 M10
32.5 38 46.5 56.50.5 720.5 890.5
7–0.2 7–0.2 9–0.2 90.2 100.2 120.2
80.1 90.1 11.50.1 150.2 180.2 200.2
25.5+1.9/–0.8 29.5+1.9/–0.8 36.5+1.9/–0.8 37+1.8/–1.7 46+1.8/–1.7 51+1.8/–1.7
148 +2.1/–1.1 173.5 +2.1/–1.1 199.5 +2.1/–1.1 208 250 275
10 13 17 17 22 22
17 19 24 24 30 30
6 6 8 8 6 6
[mm] 32 40 50 63 80 100
20
è Internet: www.festo.com/catalogue/...
Subject to change – 2017/03
Electric cylinders ESBF, with spindle drive Technical data Download CAD data è www.festo.com
Dimensions Variants …E – Piston rod extension
F – Female thread
S1 – Protection class IP65/F1 – for the food industry ESBF-32 … 50
ESBF-63 … 100
Size
A2
[mm]
Max.
32 40 50 63 80 100
200 200 200 200 200 200
2017/03 – Subject to change
D4
EE
L5
L6
K1
0.2 6.4+0.2 8.4+0.2 10.5+0.2 10.5+0.1 13+0.1 13+0.1
M7 M7 M7 Gx Gx Gx
2.6 3.3 4.7 4.7 6.1 6.1
KT
WH
Min. 19.5 24 28 48.5 57.5 68.5
M6 M8 M10 M10 M12 M12
è Internet: www.festo.com/catalogue/...
12 12 16 16 20 20
25.5+1.9/–0.8 29.5+1.9/–0.8 36.5+1.9/–0.8 37+1.8/–1.7 46+1.8/–1.7 51+1.8/–1.7
21
Electric cylinders ESBF, with spindle drive Technical data Ordering data – Standard design – Ball screw Spindle pitch Stroke Part No. [mm/rev] [mm] ESBF-32 5
100 200 300 400 100 200 300 400
10
w8022562 w2215384 w8022563 w8022564 w8022565 w8022566 w8022567 w8022568
Type
ESBF-BS-32-100-5P ESBF-BS-32-200-5P ESBF-BS-32-300-5P ESBF-BS-32-400-5P ESBF-BS-32-100-10P ESBF-BS-32-200-10P ESBF-BS-32-300-10P ESBF-BS-32-400-10P
Spindle pitch [mm/rev] ESBF-50 5
10
20
ESBF-40 5
100 200 300 400 100 200 300 400 100 200 300 400
10
16
-H-
w8022574 w2215385 w8022575 w8022576 w8022577 w8022578 w8022579 w8022580 w8022581 w8022582 w8022583 w8022584
ESBF-BS-40-100-5P ESBF-BS-40-200-5P ESBF-BS-40-300-5P ESBF-BS-40-400-5P ESBF-BS-40-100-10P ESBF-BS-40-200-10P ESBF-BS-40-300-10P ESBF-BS-40-400-10P ESBF-BS-40-100-16P ESBF-BS-40-200-16P ESBF-BS-40-300-16P ESBF-BS-40-400-16P
ESBF-63 5
10
25
Stroke [mm]
Part No.
Type
100 200 300 400 100 200 300 400 100 200 300 400
w8022590 w2215386 w8022591 w8022592 w8022593 w8022594 w8022595 w8022596 w8022597 w8022598 w8022599 w8022600
ESBF-BS-50-100-5P ESBF-BS-50-200-5P ESBF-BS-50-300-5P ESBF-BS-50-400-5P ESBF-BS-50-100-10P ESBF-BS-50-200-10P ESBF-BS-50-300-10P ESBF-BS-50-400-10P ESBF-BS-50-100-20P ESBF-BS-50-200-20P ESBF-BS-50-300-20P ESBF-BS-50-400-20P
100 200 300 400 100 200 300 400 100 200 300 400
w574093 w1347390 w574094 w574095 w574096 w574097 w574098 w574099 w574100 w574101 w574102 w574103
ESBF-BS-63-100-5P ESBF-BS-63-200-5P ESBF-BS-63-300-5P ESBF-BS-63-400-5P ESBF-BS-63-100-10P ESBF-BS-63-200-10P ESBF-BS-63-300-10P ESBF-BS-63-400-10P ESBF-BS-63-100-25P ESBF-BS-63-200-25P ESBF-BS-63-300-25P ESBF-BS-63-400-25P
Note
Order variable strokes and variants via the modular product system è page 24
22
è Internet: www.festo.com/catalogue/...
Subject to change – 2017/03
Electric cylinders ESBF, with spindle drive Technical data Ordering data – Standard design – Ball screw Spindle pitch Stroke Part No. [mm/rev] [mm] ESBF-80 5
100 200 300 400 100 200 300 400 100 200 300 400
15
32
574104 1347391 574105 574106 574107 574108 574109 574110 574111 574112 574113 574114
Ordering data – Standard design – Lead screw Spindle pitch Stroke Part No. [mm/rev] [mm] ESBF-32 2.5
ESBF-40 3
ESBF-50 4
-H-
Type
ESBF-BS-80-100-5P ESBF-BS-80-200-5P ESBF-BS-80-300-5P ESBF-BS-80-400-5P ESBF-BS-80-100-15P ESBF-BS-80-200-15P ESBF-BS-80-300-15P ESBF-BS-80-400-15P ESBF-BS-80-100-32P ESBF-BS-80-200-32P ESBF-BS-80-300-32P ESBF-BS-80-400-32P
Spindle pitch [mm/rev] ESBF-100 5
20
40
Stroke [mm]
Part No.
Type
100 200 300 400 100 200 300 400 100 200 300 400
574115 1347393 574116 574117 574118 574119 574120 574121 574122 574123 574124 574125
ESBF-BS-100-100-5P ESBF-BS-100-200-5P ESBF-BS-100-300-5P ESBF-BS-100-400-5P ESBF-BS-100-100-20P ESBF-BS-100-200-20P ESBF-BS-100-300-20P ESBF-BS-100-400-20P ESBF-BS-100-100-40P ESBF-BS-100-200-40P ESBF-BS-100-300-40P ESBF-BS-100-400-40P
Type
100 200 300 400
8022570 2295381 8022571 8022572
ESBF-LS-32-100-2.5P ESBF-LS-32-200-2.5P ESBF-LS-32-300-2.5P ESBF-LS-32-400-2.5P
100 200 300 400
8022586 2295382 8022587 8022588
ESBF-LS-40-100-3P ESBF-LS-40-200-3P ESBF-LS-40-300-3P ESBF-LS-40-400-3P
100 200 300 400
8022602 2295383 8022603 8022604
ESBF-LS-50-100-4P ESBF-LS-50-200-4P ESBF-LS-50-300-4P ESBF-LS-50-400-4P
Note
Order variable strokes and variants via the modular product system è page 24
2017/03 – Subject to change
è Internet: www.festo.com/catalogue/...
23
Electric cylinders ESBF, with spindle drive Ordering data – Modular products Ordering table Size
32
0 M Module no. Function Drive system
40
8022569 8022585 Electric cylinder Ball screw Lead screw 32 40 [mm] 100 200 300 400 30 … 800 30 … 800 [mm] 2.5 – – 3 – – 5 5 10 10 – – – 16 – – – – – – – –
Size Stroke
Spindle pitch
0 O Piston rod thread type Degree of protection for electrics Corrosion protection Additional features Piston rod extension
50
63
80
100
8022601
574090
574091
574092 1 2
50
– 63
80
100
30 … 1000 – – 4 5 10 – – 20 – – –
30 … 1200 – – – 5 10 – – – 25 – –
30 … 1500 – – – 5 – 15 – – – 32 –
30 … 1500 – – – 5 – – – 20 – – 40
Male thread Female thread Standard IP65 Standard High corrosion protection None Suitable for use in the food industry as per extended information on materials None 1 … 200
1
BS
Only with spindle pitch 5P, 10P, 15P, 16P, 20P, 25P, 32P, 40P
2
LS
Only with spindle pitch 2.5P, 3P, 4P
3
R3
Only with S1
4
F1
Only with R3
Conditions
Code
Entry code
ESBF -BS -LS -… -…
ESBF
-…P
-F -S1 3
-R3
4
-F1 -…E
Not with LS
M O
Mandatory data Options
Transfer order code ESBF
24
–
–
–
–
è Internet: www.festo.com/catalogue/...
–
–
–
–
–
–
Subject to change – 2017/03
Electric cylinders ESBF, with spindle drive Accessories
-H-
Note
Depending on the combination of motor and drive, it may not be possible to reach the maximum feed force of the drive.
When using parallel kits, the no-load driving torque of the respective kit must be taking into consideration.
Technical data è Internet: eamm-a
Permissible axis/motor combinations with axial kit Motor/gear unit1) Axial kit
Type ESBF-32 With servo motor EMME-AS-40-… EMMS-AS-40-… EMMS-AS-55-… EMME-AS-60-… With servo motor and gear unit EMME-AS-40-… EMGA-40-P-G…-EAS-40 EMMS-AS-40-… EMGA-40-P-G…-SAS-40 EMMS-AS-55-… EMGA-60-P-G…-SAS-55 EMME-AS-60-… EMGA-60-P-G…-EAS-60 EMMS-AS-70-… EMGA-60-P-G…-SAS-70 With stepper motor EMMS-ST-42-… EMMS-ST-57-… With stepper motor and gear unit EMMS-ST-42-… EMGA-40-P-G…-SST-42 EMMS-ST-57-… EMGA-60-P-G…-SST-57 With integrated drive EMCA-EC-67-…
1) 2)
Part No.
Type
w1976465 2207372 543147 1322178 550979 1322180 w1956054 2234020
EAMM-A-D32-40P EAMM-A-D32-40P-S12) EAMM-A-D32-40A EAMM-A-D32-40A-S12) EAMM-A-D32-55A EAMM-A-D32-55A-S12) EAMM-A-D32-60P EAMM-A-D32-60P-S12)
1454238 2256396 1454238 2256396 2946758 2946759 2946760 2946761 2946758 2946759
EAMM-A-D32-40G EAMM-A-D32-40G-S12) EAMM-A-D32-40G EAMM-A-D32-40G-S12) EAMM-A-D32-60G EAMM-A-D32-60G-S12) EAMM-A-D32-60H EAMM-A-D32-60H-S12) EAMM-A-D32-60G EAMM-A-D32-60G-S12)
w543148 1322179 w550980 1322181
EAMM-A-D32-42A EAMM-A-D32-42A-S12) EAMM-A-D32-57A EAMM-A-D32-57A-S12)
1454238 2256396 2946758 2946759
EAMM-A-D32-40G EAMM-A-D32-40G-S12) EAMM-A-D32-60G EAMM-A-D32-60G-S12)
1454239 2256397
EAMM-A-D32-67A EAMM-A-D32-67A-S12)
The input torque must not exceed the maximum permissible transferable torque of the axial kit. With degree of protection IP65
Festo core product range
2017/03 – Subject to change
qReady for dispatch from the Festo factory in 24 hours wReady for dispatch in 5 days maximum from stock è Internet: www.festo.com/catalogue/...
25
Electric cylinders ESBF, with spindle drive Accessories Technical data è Internet: eamm-a
Permissible axis/motor combinations with axial kit Motor1) Axial kit
Type ESBF-32 With integrated drive and gear unit EMCA-EC-67-… EMGC-40-… EMCA-EC-67-… EMGC-60-… ESBF-40 With servo motor EMMS-AS-55-… EMME-AS-60-… EMMS-AS-70-… With servo motor and gear unit EMME-AS-40-… EMGA-40-P-G…-EAS-40 EMMS-AS-40-… EMGA-40-P-G…-SAS-40 EMMS-AS-55-… EMGA-60-P-G…-SAS-55 EMME-AS-60-… EMGA-60-P-G…-EAS-60 EMMS-AS-70-… EMGA-60-P-G…-SAS-70 With stepper motor EMMS-ST-57-… EMMS-ST-87-… With stepper motor and gear unit EMMS-ST-42-… EMGA-40-P-G…-SST-42 EMMS-ST-57-… EMGA-60-P-G…-SST-57 With integrated drive EMCA-EC-67-… With integrated drive and gear unit EMCA-EC-67-… EMGC-40-… EMCA-EC-67-… EMGC-60-… 1) 2)
Type
1454238 2256396 2946760 2946761
EAMM-A-D32-40G EAMM-A-D32-40G-S12) EAMM-A-D32-60H EAMM-A-D32-60H-S12)
543153 1322182 w1977000 2151519 550981 1322185
EAMM-A-D40-55A EAMM-A-D40-55A-S12) EAMM-A-D40-60P EAMM-A-D40-60P-S12) EAMM-A-D40-70A EAMM-A-D40-70A-S12)
2256398 2256399 2256398 2256399 2256400 2256409 1454242 2256401 2256400 2256409
EAMM-A-D40-40G-G2 EAMM-A-D40-40G-S12) EAMM-A-D40-40G-G2 EAMM-A-D40-40G-S12) EAMM-A-D40-60G EAMM-A-D40-60G-S12) EAMM-A-D40-60H EAMM-A-D40-60H-S12) EAMM-A-D40-60G EAMM-A-D40-60G-S12)
w543154 1322183 w550982 1322186
EAMM-A-D40-57A EAMM-A-D40-57A-S12) EAMM-A-D40-87A EAMM-A-D40-87A-S12)
2256398 2256399 2256400 2256409
EAMM-A-D40-40G-G2 EAMM-A-D40-40G-S12) EAMM-A-D40-60G EAMM-A-D40-60G-S12)
1454243 2256695
EAMM-A-D40-67A EAMM-A-D40-67A-S12)
2256398 2256399 1454242 2256401
EAMM-A-D40-40G-G2 EAMM-A-D40-40G-S12) EAMM-A-D40-60H EAMM-A-D40-60H-S12)
The input torque must not exceed the maximum permissible transferable torque of the axial kit. With degree of protection IP65
Festo core product range
26
Part No.
qReady for dispatch from the Festo factory in 24 hours wReady for dispatch in 5 days maximum from stock è Internet: www.festo.com/catalogue/...
Subject to change – 2017/03
Electric cylinders ESBF, with spindle drive Accessories Technical data è Internet: eamm-a
Permissible axis/motor combinations with axial kit Motor1) Axial kit
Type
Part No.
ESBF-50 With servo motor EMMS-AS-70-… EMME-AS-80-… EMME-AS-100-… EMMS-AS-100-… With servo motor and gear unit EMMS-AS-55-… EMGA-60-P-G…-SAS-55 EMME-AS-60-… EMGA-60-P-G…-EAS-60 EMMS-AS-70-… EMGA-60-P-G…-SAS-70 EMMS-AS-70-… EMGA-80-P-G…-SAS-70 EMME-AS-80-… EMGA-80-P-G…-EAS-80 EMME-AS-100-… EMGA-80-P-G…-SAS-100 EMMS-AS-100-… EMGA-80-P-G…-SAS-100 With stepper motor EMMS-ST-87-… With stepper motor and gear unit EMMS-ST-57-… EMGA-60-P-G…-SST-57 EMMS-ST-87-… EMGA-80-P-G…-SST-87 With integrated drive and gear unit EMCA-EC-67-… EMGC-60-… 1) 2)
2733783 2734287 w2733785 2734289 w2733784 2734288 w2733784 2734288
Type
EAMM-A-D50-70A EAMM-A-D50-70A-S12) EAMM-A-D50-80P EAMM-A-D50-80P-S12) EAMM-A-D50-100A EAMM-A-D50-100A-S12) EAMM-A-D50-100A EAMM-A-D50-100A-S12)
2733786 2734290 2733796 2907418 2733786 2734290 2733787 2734291 2733787 2734291 2733787 2734291 2733787 2734291
EAMM-A-D50-60G EAMM-A-D50-60G-S12) EAMM-A-D50-60H EAMM-A-D50-60H-S12) EAMM-A-D50-60G EAMM-A-D50-60G-S12) EAMM-A-D50-80G EAMM-A-D50-80G-S12) EAMM-A-D50-80G EAMM-A-D50-80G-S12) EAMM-A-D50-80G EAMM-A-D50-80G-S12) EAMM-A-D50-80G EAMM-A-D50-80G-S12)
w2733781 2734286
EAMM-A-D50-87A EAMM-A-D50-87A-S12)
2733786 2734290 2733787 2734291
EAMM-A-D50-60G EAMM-A-D50-60G-S12) EAMM-A-D50-80G EAMM-A-D50-80G-S12)
2733796 2907418
EAMM-A-D50-60H EAMM-A-D50-60H-S12)
The input torque must not exceed the maximum permissible transferable torque of the axial kit. With degree of protection IP65
-H-
Note
The axial kit (without “S1” in the type code) can be retrofitted with a seal
Festo core product range
2017/03 – Subject to change
set EADS-F to change the degree of protection from IP40 to IP65.
Additional information è eamm-a
qReady for dispatch from the Festo factory in 24 hours wReady for dispatch in 5 days maximum from stock è Internet: www.festo.com/catalogue/...
27
Electric cylinders ESBF, with spindle drive Accessories Technical data è Internet: eamm-a
Permissible axis/motor combinations with axial kit Motor1) Axial kit
Type ESBF-63 With servo motor EMMS-AS-70-… EMME-AS-80-… EMME-AS-100-… EMMS-AS-100-… With servo motor and gear unit EMMS-AS-55-… EMGA-60-P-G…-SAS-55 EMME-AS-60-… EMGA-60-P-G…-EAS-60 EMMS-AS-70-… EMGA-60-P-G…-SAS-70 EMMS-AS-70-… EMGA-80-P-G…-SAS-70 EMME-AS-80-… EMGA-80-P-G…-EAS-80 EMME-AS-100-… EMGA-80-P-G…-SAS-100 EMMS-AS-100-… EMGA-80-P-G…-SAS-100 With stepper motor EMMS-ST-87-… With stepper motor and gear unit EMMS-ST-57-… EMGA-60-P-G…-SST-57 EMMS-ST-87-… EMGA-80-P-G…-SST-87 With integrated drive and gear unit EMCA-EC-67-… EMGC-60-… 1) 2)
543161 2256699 w1977073 2218564 550983 2256700 w550983 2256700
Type
EAMM-A-D60-70A EAMM-A-D60-70A-S12) EAMM-A-D60-80P EAMM-A-D60-80P-S12) EAMM-A-D60-100A EAMM-A-D60-100A-S12) EAMM-A-D60-100A EAMM-A-D60-100A-S12)
2256696 2256698 1454245 2256697 2256696 2256698 1499402 2946762 1499402 2946762 1499402 2946762 1499402 2946762
EAMM-A-D60-60G-G2 EAMM-A-D60-60G-S12) EAMM-A-D60-60H EAMM-A-D60-60H-S12) EAMM-A-D60-60G-G2 EAMM-A-D60-60G-S12) EAMM-A-D60-80G EAMM-A-D60-80G-S12) EAMM-A-D60-80G EAMM-A-D60-80G-S12) EAMM-A-D60-80G EAMM-A-D60-80G-S12) EAMM-A-D60-80G EAMM-A-D60-80G-S12)
w543162 1322188
EAMM-A-D60-87A EAMM-A-D60-87A-S12)
2256696 2256698 1499402 2946762
EAMM-A-D60-60G-G2 EAMM-A-D60-60G-S12) EAMM-A-D60-80G EAMM-A-D60-80G-S12)
1454245 2256697
EAMM-A-D60-60H EAMM-A-D60-60H-S12)
The input torque must not exceed the maximum permissible transferable torque of the axial kit. With degree of protection IP65
Festo core product range
28
Part No.
qReady for dispatch from the Festo factory in 24 hours wReady for dispatch in 5 days maximum from stock è Internet: www.festo.com/catalogue/...
Subject to change – 2017/03
Electric cylinders ESBF, with spindle drive Accessories Technical data è Internet: eamm-a
Permissible axis/motor combinations with axial kit Motor1) Axial kit
Type ESBF-80 With servo motor EMME-AS-100 EMMS-AS-100-… EMMS-AS-140-… With servo motor and gear unit EMMS-AS-70-… EMGA-80-P-G…-SAS-70 EMME-AS-80-… EMGA-80-P-G…-EAS-80 EMME-AS-100-… EMGA-80-P-G…-SAS-100 EMMS-AS-100-… EMGA-80-P-G…-SAS-100 With stepper motor and gear unit EMMS-ST-87-… EMGA-80-P-G…-SST-87 ESBF-100 With servo motor EMME-AS-100 EMMS-AS-100-… EMMS-AS-140-… With servo motor and gear unit EMME-AS-100-… EMGA-120-P-G…-SAS-100 EMMS-AS-100-… EMGA-120-P-G…-SAS-100 EMMS-AS-140-… EMGA-120-P-G…-SAS-140 1) 2)
Part No.
Type
1589665 1600673 1589665 1600673 1588299 1600674
EAMM-A-D80-100A EAMM-A-D80-100A-S12) EAMM-A-D80-100A EAMM-A-D80-100A-S12) EAMM-A-D80-140A EAMM-A-D80-140A-S12)
2946763 2946764 2946763 2946764 2946763 2946764 2946763 2946764
EAMM-A-D80-80G EAMM-A-D80-80G-S12) EAMM-A-D80-80G EAMM-A-D80-80G-S12) EAMM-A-D80-80G EAMM-A-D80-80G-S12) EAMM-A-D80-80G EAMM-A-D80-80G-S12)
2946763 2946764
EAMM-A-D80-80G EAMM-A-D80-80G-S12)
3356796 3356931 3356796 3356931 1588349 1600675
EAMM-A-D100-100A EAMM-A-D100-100A-S1 2) EAMM-A-D100-100A EAMM-A-D100-100A-S1 2) EAMM-A-D100-140A EAMM-A-D100-140A-S1 2)
2449341 2946765 2449341 2946765 2449341 2946765
EAMM-A-D100-120G EAMM-A-D100-120G-S1 2) EAMM-A-D100-120G EAMM-A-D100-120G-S1 2) EAMM-A-D100-120G EAMM-A-D100-120G-S1 2)
The input torque must not exceed the maximum permissible transferable torque of the axial kit. With degree of protection IP65
-H-
Note
The axial kit (without “S1” in the type code) can be retrofitted with a seal
2017/03 – Subject to change
set EADS-F to change the degree of protection from IP40 to IP65.
Additional information è eamm-a
è Internet: www.festo.com/catalogue/...
29
Electric cylinders ESBF, with spindle drive Accessories Part components of the axial kit Axial kit Comprises: Motor flange
Part No. Type ESBF-32 543147 EAMM-A-D32-40A 1322178 EAMM-A-D32-40A-S11) 1454238 EAMM-A-D32-40G 2256396 EAMM-A-D32-40G-S11) w1976465 EAMM-A-D32-40P 2207372 EAMM-A-D32-40P-S11) w543148 EAMM-A-D32-42A 1322179 EAMM-A-D32-42A-S11) 550979 EAMM-A-D32-55A 1322180 EAMM-A-D32-55A-S11) w550980 EAMM-A-D32-57A 1322181 EAMM-A-D32-57A-S11) 2946758 EAMM-A-D32-60G 2946759 EAMM-A-D32-60G-S11) 2946760 EAMM-A-D32-60H 2946761 EAMM-A-D32-60H-S11) w1956054 EAMM-A-D32-60P 2234020 EAMM-A-D32-60P-S11) 1454239 EAMM-A-D32-67A 2256397 EAMM-A-D32-67A-S11) 1)
Coupling housing
Seal set
Part No. Type
Part No. Type
Part No. Type
Part No. Type
552163 EAMF-A-28B-40A
543420 EAMC-16-20-6-6
552155 EAMK-A-D32-28B
–
1460095 EAMF-A-44C-40G-S1
1976704 EAMF-A-28B-40P
552164 EAMF-A-28B-42A
529942 EAMF-A-44A/B-55A
530081 EAMF-A-44A/B-57A
1460105 EAMF-A-44C-60G/H-S1
1460105 EAMF-A-44C-60G/H-S1
1956846 EAMF-A-44C-60P
1476305 EAMF-A-44A/B/C-67A-S1
562681 EAMC-30-32-6-10
1232854 EAMC-16-20-6-8
543419 EAMC-16-20-5-6
551003 EAMC-30-32-6-9
551002 EAMC-30-32-6-6.35
3187577 EAMC-30-32-6-11
1233256 EAMC-30-32-6-14
1233256 EAMC-30-32-6-14
551003 EAMC-30-32-6-9
551006 EAMK-A-D32-44A/C
552155 EAMK-A-D32-28B
552155 EAMK-A-D32-28B
551006 EAMK-A-D32-44A/C
551006 EAMK-A-D32-44A/C
551006 EAMK-A-D32-44A/C
551006 EAMK-A-D32-44A/C
551006 EAMK-A-D32-44A/C
551006 EAMK-A-D32-44A/C
1561526 EADS-F-D32-40A – 2253500 EADS-F-D32-40G – 2207219 EADS-F-D32-40P – 1561527 EADS-F-D32-42A – 1561528 EADS-F-D32-55A – 1561529 EADS-F-D32-57A – 8022150 EADS-F-D32-60G/H – 8022150 EADS-F-D32-60G/H – 2234012 EADS-F-D32-60P – 2253501 EADS-F-D32-67A
With degree of protection IP65
Festo core product range
30
Coupling
qReady for dispatch from the Festo factory in 24 hours wReady for dispatch in 5 days maximum from stock è Internet: www.festo.com/catalogue/...
Subject to change – 2017/03
Electric cylinders ESBF, with spindle drive Accessories Part components of the axial kit Axial kit Comprises: Motor flange
Part No. Type ESBF-40 2256398 EAMM-A-D40-40G-G2 2256399 EAMM-A-D40-40G-S11) 543153 EAMM-A-D40-55A 1322182 EAMM-A-D40-55A-S11) w543154 EAMM-A-D40-57A 1322183 EAMM-A-D40-57A-S11) 2256400 EAMM-A-D40-60G 2256409 EAMM-A-D40-60G-S11) 1454242 EAMM-A-D40-60H 2256401 EAMM-A-D40-60H-S11) w1977000 EAMM-A-D40-60P 2151519 EAMM-A-D40-60P-S11) 1454243 EAMM-A-D40-67A 2256695 EAMM-A-D40-67A-S11) 550981 EAMM-A-D40-70A 1322185 EAMM-A-D40-70A-S11) w550982 EAMM-A-D40-87A 1322186 EAMM-A-D40-87A-S11) 1)
Coupling
Coupling housing
Seal set
Part No. Type
Part No. Type
Part No. Type
Part No. Type
1460095 EAMF-A-44C-40G-S1
558029 EAMC-30-32-8-10
552157 EAMK-A-D40-44A/C
–
529942 EAMF-A-44A/B-55A
530081 EAMF-A-44A/B-57A
1460105 EAMF-A-44C-60G/H-S1
1460105 EAMF-A-44C-60G/H-S1
1956846 EAMF-A-44C-60P
1476305 EAMF-A-44A/B/C-67A-S1
529943 EAMF-A-44A/B-70A
530082 EAMF-A-44A/B-87A
543423 EAMC-30-32-8-9
543421 EAMC-30-32-6.35-8
551004 EAMC-30-32-8-11
562682 EAMC-30-32-8-14
562682 EAMC-30-32-8-14
543423 EAMC-30-32-8-9
551004 EAMC-30-32-8-11
551004 EAMC-30-32-8-11
552157 EAMK-A-D40-44A/C
552157 EAMK-A-D40-44A/C
552157 EAMK-A-D40-44A/C
552157 EAMK-A-D40-44A/C
552157 EAMK-A-D40-44A/C
551006 EAMK-A-D32-44A/C
552157 EAMK-A-D40-44A/C
552157 EAMK-A-D40-44A/C
2253502 EADS-F-D40-40G – 1561530 EADS-F-D40-55A – 1561531 EADS-F-D40-57A – 2253503 EADS-F-D40-60G/H – 2253503 EADS-F-D40-60G/H – 2151545 EADS-F-D40-60P – 2253501 EADS-F-D32-67A – 1561532 EADS-F-D40-70A – 1561533 EADS-F-D40-87A
With degree of protection IP65
Festo core product range
2017/03 – Subject to change
qReady for dispatch from the Festo factory in 24 hours wReady for dispatch in 5 days maximum from stock è Internet: www.festo.com/catalogue/...
31
Electric cylinders ESBF, with spindle drive Accessories Part components of the axial kit Axial kit Comprises: Motor flange
Part No. Type ESBF-50 2733786 EAMM-A-D50-60G 2734290 EAMM-A-D50-60G-S11) 2733796 EAMM-A-D50-60H 2907418 EAMM-A-D50-60H-S11) 2733783 EAMM-A-D50-70A 2734287 EAMM-A-D50-70A-S11) 2733787 EAMM-A-D50-80G 2734291 EAMM-A-D50-80G-S11) w2733785 EAMM-A-D50-80P 2734289 EAMM-A-D50-80P-S11) w2733781 EAMM-A-D50-87A 2734286 EAMM-A-D50-87A-S11) w2733784 EAMM-A-D50-100A 2734288 EAMM-A-D50-100A-S11) ESBF-63 2256696 EAMM-A-D60-60G-G2 2256698 EAMM-A-D60-60G-S11) 1454245 EAMM-A-D60-60H 2256697 EAMM-A-D60-60H-S11) 543161 EAMM-A-D60-70A 2256699 EAMM-A-D60-70A-S11) 1)
Coupling housing
Seal set
Part No. Type
Part No. Type
Part No. Type
Part No. Type
2256289 EAMF-A-64B-60G/H-S1
543424 EAMC-42-50-11-12
2733780 EAMK-A-D50-64B
–
2256289 EAMF-A-64B-60G/H-S1
529945 EAMF-A-64A/B-70A
2843290 EAMF-A-64C-80G-S1
1977113 EAMF-A-64A/C-80P
533140 EAMF-A-64A/B-87A
529947 EAMF-A-64A/C/D-100A
1455671 EAMC-42-50-12-14
543424 EAMC-42-50-11-12
2138701 EAMC-42-50-12-20
551005 EAMC-42-50-12-19
543424 EAMC-42-50-11-12
551005 EAMC-42-50-12-19
2733780 EAMK-A-D50-64B
2733780 EAMK-A-D50-64B
2836865 EAMK-A-D50-64C
2836865 EAMK-A-D50-64C
2733780 EAMK-A-D50-64B
2836865 EAMK-A-D50-64C
2733792 EADS-F-D50-60G/H – 2733792 EADS-F-D50-60G/H – 2733789 EADS-F-D50-70A – 2733793 EADS-F-D50-80G – 2733791 EADS-F-D50-80P – 2733788 EADS-F-D50-87A – 2733790 EADS-F-D50-100A
2256289 EAMF-A-64B-60G/H-S1
2256289 EAMF-A-64B-60G/H-S1
529945 EAMF-A-64A/B-70A
543424 EAMC-42-50-11-12
1455671 EAMC-42-50-12-14
543424 EAMC-42-50-11-12
552160 EAMK-A-D60-64B
552160 EAMK-A-D60-64B
552160 EAMK-A-D60-64B
– 2253505 EADS-F-D60-60G/H – 2253505 EADS-F-D60-60G/H – 8022145 EADS-F-D60-70A
With degree of protection IP65
Festo core product range
32
Coupling
qReady for dispatch from the Festo factory in 24 hours wReady for dispatch in 5 days maximum from stock è Internet: www.festo.com/catalogue/...
Subject to change – 2017/03
Electric cylinders ESBF, with spindle drive Accessories Part components of the axial kit Axial kit Comprises: Motor flange
Part No. Type ESBF-63 1499402 EAMM-A-D60-80G 2946762 EAMM-A-D60-80G-S11) w1977073 EAMM-A-D60-80P 2218564 EAMM-A-D60-80P-S11) w543162 EAMM-A-D60-87A 1322188 EAMM-A-D60-87A-S11) w550983 EAMM-A-D60-100A 2256700 EAMM-A-D60-100A-S11) ESBF-80 2946763 EAMM-A-D80-80G 2946764 EAMM-A-D80-80G-S11) 1589665 EAMM-A-D80-100A 1600673 EAMM-A-D80-100A-S11) 1588299 EAMM-A-D80-140A 1600674 EAMM-A-D80-140A-S11) ESBF-100 1588349 EAMM-A-D100-140A 1600675 EAMM-A-D100-140A-S1 1) 3356796 EAMM-A-D100-100A 3356931 EAMM-A-D100-100A-S1 1) 2449341 EAMM-A-D100-120G 2946765 EAMM-A-D100-120G-S1 1) 1)
Coupling
Coupling housing
Seal set
Part No. Type
Part No. Type
Part No. Type
Part No. Type
2843290 EAMF-A-64C-80G-S1
2138701 EAMC-42-50-12-20
551007 EAMK-A-D60-64C
–
1977113 EAMF-A-64A/C-80P
533140 EAMF-A-64A/B-87A
529947 EAMF-A-64A/C/D-100A
551005 EAMC-42-50-12-19
543424 EAMC-42-50-11-12
551005 EAMC-42-50-12-19
551007 EAMK-A-D60-64C
552160 EAMK-A-D60-64B
551007 EAMK-A-D60-64C
8022146 EADS-F-D60-80G – 2218523 EADS-F-D60-80P – 1561536 EADS-F-D60-87A – 2253507 EADS-F-D60-100A
2933286 EAMF-A-77A-80G-S1
1593628 EAMF-A-77A-100A
1593636 EAMF-A-77A-140A
3181801 EAMC-56-58-19-20
1485673 EAMC-56-58-19-19
1485674 EAMC-56-58-19-24
1593627 EAMK-A-D80-77A
1593627 EAMK-A-D80-77A
1593627 EAMK-A-D80-77A
– 8022147 EADS-F-D80-80G – 1593617 EADS-F-D80-100A – 1593671 EADS-F-D80-140A
1593636 EAMF-A-77A-140A
1593628 EAMF-A-77A-100A
2449380 EAMF-A-77B-120G-S1
1451407 EAMC-67-62-24-24
1485674 EAMC-56-58-19-24
3187895 EAMC-67-62-24-25
1593914 EAMK-A-D100-77A/B
1593914 EAMK-A-D100-77A/B
1593914 EAMK-A-D100-77A/B
– 1593991 EADS-F-D100-140A – 3356966 EADS-F-D100-100A – 8022148 EADS-F-D100-120G
With degree of protection IP65
Festo core product range
2017/03 – Subject to change
qReady for dispatch from the Festo factory in 24 hours wReady for dispatch in 5 days maximum from stock è Internet: www.festo.com/catalogue/...
33
Electric cylinders ESBF, with spindle drive Accessories Technical data è Internet: eamm-u
Permissible axis/motor combinations with parallel kit Motor/gear unit1) Parallel kit
Components can be mounted to the kit facing any direction Optionally with degree of protection IP65 Use in combination with third-party motors on request
Type ESBF-32 With servo motor EMME-AS-40-… EMMS-AS-40-… EMMS-AS-55-… EMME-AS-60-… EMMS-AS-70-… With stepper motor EMMS-ST-42-… EMMS-ST-57-… With gear unit EMGA-40-P-…, EMGC-40-P-… EMGA-60-P-…-SAS/SST3) EMGA-60-P-…-EAS, EMGC-60-P-…3) With motor unit4) MTR-DCI-32S-… MTR-DCI-42S-… MTR-DCI-52S-… ESBF-40 With servo motor EMMS-AS-55-… EMME-AS-60-… EMMS-AS-70-… EMMS-AS-70-… EMME-AS-80-…
1) 2) 3) 4)
Type
w2153283 2154009 1201591 1202302 1210126 1210450 w2619586 2619688 2755565 2781711
EAMM-U-50-D32-40P-78 EAMM-U-50-D32-40P-78-S1 2) EAMM-U-50-D32-40A-78 EAMM-U-50-D32-40A-78-S1 2) EAMM-U-60-D32-55A-91 EAMM-U-60-D32-55A-91-S1 2) EAMM-U-70-D32-60P-96 EAMM-U-70-D32-60P-96-S1 2) EAMM-U-70-D32-70A-96 EAMM-U-70-D32-70A-96-S1 2)
w1201607 1202312 w1210419 1210453
EAMM-U-50-D32-42A-78 EAMM-U-50-D32-42A-78-S1 2) EAMM-U-60-D32-57A-91 EAMM-U-60-D32-57A-91-S1 2)
1577358 1577346 2748181 2778302 2778393 2781450
EAMM-U-60-D32-40G-91 EAMM-U-60-D32-40G-91-S1 2) EAMM-U-70-D32-60G-96 EAMM-U-70-D32-60G-96-S1 2) EAMM-U-70-D32-60H-96 EAMM-U-70-D32-60H-96-S1 2)
1570862 1577393 2755890
EAMM-U-50-D32-32B-78 EAMM-U-60-D32-42B/C-91 EAMM-U-70-D32-52B/C-96
1210438 1210458 w2617488 2546123 2786204 2786316 1212826 1212854 w2802441 2802656
EAMM-U-60-D40-55A-91 EAMM-U-60-D40-55A-91-S1 2) EAMM-U-70-D40-60P-96 EAMM-U-70-D40-60P-96-S1 2) EAMM-U-70-D40-70A-96 EAMM-U-70-D40-70A-96-S1 2) EAMM-U-86-D40-70A-102 EAMM-U-86-D40-70A-102-S1 2) EAMM-U-86-D40-80P-102 EAMM-U-86-D40-80P-102-S1 2)
The input torque must not exceed the maximum permissible transferable torque of the parallel kit. With degree of protection IP65 Gear unit drive shaft diameter: EMGA-60-P-…-SAS/-SST11 mm; EMGA-60-P-…-EAS, EMGC-60-P14 mm Only in combination with ESBF-LS-…
Festo core product range
34
Part No.
qReady for dispatch from the Festo factory in 24 hours wReady for dispatch in 5 days maximum from stock è Internet: www.festo.com/catalogue/...
Subject to change – 2017/03
Electric cylinders ESBF, with spindle drive Accessories Technical data è Internet: eamm-u
Permissible axis/motor combinations with parallel kit Motor/gear unit1) Parallel kit
Components can be mounted to the kit facing any direction Optionally with degree of protection IP65 Use in combination with third-party motors on request
Type
Part No.
ESBF-40 With stepper motor EMMS-ST-57-… EMMS-ST-87-… With gear unit EMGA-40-P-…, EMGC-40-P-… EMGA-60-P-…-SAS/SST3 EMGA-60-P-…-EAS, EMGC-60-P-…3) EMGA-60-P-…-SAS/SST3 EMGA-60-P-…-EAS, EMGC-60-P-…3) With motor unit4) MTR-DCI-42S-… MTR-DCI-52S-… MTR-DCI-52S-… ESBF-50 With servo motor EMMS-AS-70-… EMME-AS-80-… EMME-AS-100-… EMMS-AS-100-… With stepper motor EMMS-ST-87-…
1) 2) 3) 4)
Type
w1210442 1210462 w1215802 1215814
EAMM-U-60-D40-57A-91 EAMM-U-60-D40-57A-91-S1 2) EAMM-U-86-D40-87A-102 EAMM-U-86-D40-87A-102-S1 2)
1577165 1435968 2785471 2785542 2786101 2786137 1586445 1586429 1586496 1586372
EAMM-U-60-D40-40G-91 EAMM-U-60-D40-40G-91-S1 2) EAMM-U-70-D40-60G-96 EAMM-U-70-D40-60G-96-S1 2) EAMM-U-70-D40-60H-96 EAMM-U-70-D40-60H-96-S1 2) EAMM-U-86-D40-60G-102 EAMM-U-86-D40-60G-102-S1 2) EAMM-U-86-D40-60H-102 EAMM-U-86-D40-60H-102-S1 2)
1570950 2786802 1537046
EAMM-U-60-D40-42B/C-91 EAMM-U-70-D40-52B/C-96 EAMM-U-86-D40-52B/C-102
2786899 2756078 w2803053 2803073 w2799424 2799488 w2799424 2799488
EAMM-U-70-D50-70A-96 EAMM-U-70-D50-70A-96-S1 2) EAMM-U-86-D50-80P-102 EAMM-U-86-D50-80P-102-S1 2) EAMM-U-110-D50-100A-120 EAMM-U-110-D50-100A-120-S1 2) EAMM-U-110-D50-100A-120 EAMM-U-110-D50-100A-120-S1 2)
w2802708 2802742
EAMM-U-86-D50-87A-102 EAMM-U-86-D50-87A-102-S1 2)
The input torque must not exceed the maximum permissible transferable torque of the parallel kit. With degree of protection IP65 Gear unit drive shaft diameter: EMGA-60-P-…-SAS/-SST11 mm; EMGA-60-P-…-EAS, EMGC-60-P14 mm Only in combination with ESBF-LS-…
-H-
Note
The clamping component EADT is required to adjust the toothed belt pretension with EAMM-U-110.
The motor and/or axis shaft can optionally be supported with a counter bearing EAMG.
Festo core product range
qReady for dispatch from the Festo factory in 24 hours wReady for dispatch in 5 days maximum from stock
2017/03 – Subject to change
Additional information è eamm-u
è Internet: www.festo.com/catalogue/...
35
Electric cylinders ESBF, with spindle drive Accessories Technical data è Internet: eamm-u
Permissible axis/motor combinations with parallel kit Motor/gear unit1) Parallel kit
Components can be mounted to the kit facing any direction Optionally with degree of protection IP65 Use in combination with third-party motors on request
Type ESBF-50 With gear unit EMGA-60-P-…-SAS/SST3) EMGA-60-P-…-EAS, EMGC-60-P-…3) EMGA-60-P-…-SAS/SST3) EMGA-60-P-…-EAS, EMGC-60-P-…3) EMGA-80-P-…
ESBF-63 With servo motor EMMS-AS-70-… EMME-AS-80-… EMME-AS-100-… EMMS-AS-100-… With stepper motor EMMS-ST-87-… With gear unit EMGA-60-P-…-SAS/SST3 EMGA-60-P-…-EAS, EMGC-60-P-…3) EMGA-60-P-…-SAS/SST3 EMGA-60-P-…-EAS, EMGC-60-P-…3) EMGA-80-P-…
1) 2) 3)
Part No.
Type
2803125 2803197 2803326 2803325 2797368 2798665 2798760 2799150 2799196 2799281
EAMM-U-86-D50-60G-102 EAMM-U-86-D50-60G-102-S1 2) EAMM-U-86-D50-60H-102 EAMM-U-86-D50-60H-102-S1 2) EAMM-U-110-D50-60G-120 EAMM-U-110-D50-60G-120-S1 2) EAMM-U-110-D50-60H-120 EAMM-U-110-D50-60H-120-S1 2) EAMM-U-110-D50-80G-120 EAMM-U-110-D50-80G-120-S1 2)
1212477 1212835 w2155875 2156527 w1202436 1203112 w1202436 1203112
EAMM-U-86-D60-70A-102 EAMM-U-86-D60-70A-102-S1 2) EAMM-U-86-D60-80P-102 EAMM-U-86-D60-80P-102-S1 2) EAMM-U-110-D60-100A-120 EAMM-U-110-D60-100A-120-S1 2) EAMM-U-110-D60-100A-120 EAMM-U-110-D60-100A-120-S1 2)
w1215784 1215810
EAMM-U-86-D60-87A-102 EAMM-U-86-D60-87A-102-S1 2)
1586347 1437163 1586276 1530837 1543240 1436183 1542264 1530621 1532949 1530875
EAMM-U-86-D60-60G-102 EAMM-U-86-D60-60G-102-S1 2) EAMM-U-86-D60-60H-102 EAMM-U-86-D60-60H-102-S1 2) EAMM-U-110-D60-60G-120 EAMM-U-110-D60-60G-120-S1 2) EAMM-U-110-D60-60H-120 EAMM-U-110-D60-60H-120-S1 2) EAMM-U-110-D60-80G-120 EAMM-U-110-D60-80G-120-S1 2)
The input torque must not exceed the maximum permissible transferable torque of the parallel kit. With degree of protection IP65 Gear unit drive shaft diameter: EMGA-60-P-…-SAS/-SST11 mm; EMGA-60-P-…-EAS, EMGC-60-P14 mm
-H-
Note
The clamping component EADT is required to adjust the toothed belt pretension with EAMM-U-110.
The motor and/or axis shaft can optionally be supported with a counter bearing EAMG.
Festo core product range
qReady for dispatch from the Festo factory in 24 hours wReady for dispatch in 5 days maximum from stock
36
è Internet: www.festo.com/catalogue/...
Additional information è eamm-u
Subject to change – 2017/03
Electric cylinders ESBF, with spindle drive Accessories Technical data è Internet: eamm-u
Permissible axis/motor combinations with parallel kit Motor/gear unit1) Parallel kit
Components can be mounted to the kit facing any direction Optionally with degree of protection IP65 Use in combination with third-party motors on request
Type ESBF-80 With servo motor EMME-AS-100-… EMMS-AS-100-… EMMS-AS-140-… With gear unit EMGA-80-P-…
ESBF-100 With servo motor EMMS-AS-140-… With gear unit EMGA-120-P-…
1) 2)
Part No.
Type
1465438 1433650 1465438 1433650 1465530 1433709
EAMM-U-110-D80-100A-120 EAMM-U-110-D80-100A-120-S1 2) EAMM-U-110-D80-100A-120 EAMM-U-110-D80-100A-120-S1 2) EAMM-U-145-D80-140A-188 EAMM-U-145-D80-140A-188-S1 2)
1589614 1589706
EAMM-U-110-D80-80G-120 EAMM-U-110-D80-80G-120-S1 2)
1465541 1433852
EAMM-U-145-D100-140A-188 EAMM-U-145-D100-140A-188-S1 2)
2803620 2803622
EAMM-U-145-D100-120G-188 EAMM-U-145-D100-120G-188-S1 2)
The input torque must not exceed the maximum permissible transferable torque of the parallel kit. With degree of protection IP65
-H-
Note
The clamping component EADT is required to adjust the toothed belt pretension with EAMM-U-110.
2017/03 – Subject to change
The motor and/or axis shaft can optionally be supported with a counter bearing EAMG.
Additional information è eamm-u
è Internet: www.festo.com/catalogue/...
37
Electric cylinders ESBF, with spindle drive Accessories Protective bellows kit EADB
General technical data Type EADB-V2-
32
Max. stroke range of cylinder1) Type of mounting
[mm]
Mounting position Resistance to media Ambient temperature2) Degree of protection to IEC 60529 Corrosion resistance class CRC3) 1) 2) 3)
[°C]
40
50
63
30 … 500 30 … 500 30 … 500 30 … 500 Push-on Via threaded pin Any Dust, chippings, oil, grease, petrol (è Internet: Resistance to media) –10 … +80 IP65 3
80 30 … 500
In combination with the protective bellows kit EADB Note operating range of proximity sensors and cylinder Corrosion resistance class CRC 3 to Festo standard FN 940070 High corrosion stress. Outdoor exposure under moderate corrosive conditions. External visible parts with primarily functional requirements for the surface and which are in direct contact with a normal industrial environment.
Materials Sectional view 1
2
3
4
Bellows 1 2 3 4 –
Weight [g] Type EADB-V2Stroke [mm]
Connection Adapter Bellows End piece O-ring Note on materials
Anodised wrought aluminium alloy Polyamide NBR Anodised wrought aluminium alloy NBR Free of copper and PTFE RoHS compliant
32
40
50
63
80
Product weight 10 … 100 101 … 200 201 … 300 301 … 400 401 … 500
116 155 173 212 233
109 146 164 201 222
190 261 306 377 402
203 265 307 370 391
269 327 365 423 444
Moving mass 10 … 100 101 … 200 201 … 300 301 … 400 401 … 500
46 85 104 143 163
44 82 99 137 157
93 164 209 280 305
79 142 183 246 267
72 130 168 226 247
38
è Internet: www.festo.com/catalogue/...
Subject to change – 2017/03
Electric cylinders ESBF, with spindle drive Accessories Travel speed v as a function of tubing length l The protective bellows kit is a leakfree system. To prevent unwanted media from being drawn in, the supply and exhaust air for the kit must be ducted
1
For size 32
via a pressure compensation hole in the connection part 1. The pressure generated in the protect ive bellows kit by the positioning mo tion is primarily defined by the travel
speed and tubing length. The recom mended tubing length based on the travel speed of the drive can be read from the graph.
For size 40
with QS-G1/4-12, QSH-16-12, PUN-16x2,5 with QS-G1/4-12, PUN-12x2 with QS-G1/4-10, PUN-10x1,5 For size 50
with QS-G1/4-12, QSH-16-12, PUN-16x2,5 with QS-G1/4-10, PUN-10x1,5
For size 63
with QS-G1/4-12, QSH-16-12, PUN-16x2,5
with QS-G1/4-12, PUN-12x2 with QS-G1/4-12, QSH-16-12, PUN-16x2,5
For size 80
with QS-G1/4-12, PUN-12x2 with QS-G1/4-12, QSH-16-12, PUN-16x2,5
2017/03 – Subject to change
è Internet: www.festo.com/catalogue/...
39
Electric cylinders ESBF, with spindle drive Accessories Tubing size and push-in fitting for pressure compensation hole The push-in fittings in the following table must be used for the pressure compensation hole.
Silencers can be used as an altern ative. This reduces the travel speed slightly.
[mm]
Tubing O.D. [mm]
Push-in fitting Part No. Type
32, 40, 50, 63, 80 32, 63, 80 32, 40
16
q186350
QS-G¼-12
12 10
q186350 q186101
QS-G¼-12 QS-G¼-10
Push-in sleeve Part No. Type 153261
Plastic tubing Type
QSH-16-12
PUN-16x2,5
– –
PUN-12x2 PUN-10x1,5
Download CAD data è www.festo.com
Dimensions
+ Stroke [mm]
A21)
10 … 100 101 … 200 201 … 300 301 … 400 401 … 500
52 81 92 121 139
Stroke [mm]
A21)
10 … 100 101 … 200 201 … 300 301 … 400 401 … 500
50 79 90 119 137
1)
D2
32 EE
L1
L2
WH+A2
57
17
G¼
15
23.3
77.5 106.5 117.5 146.5 164.5
D1 Max.
D2
40 EE
L1
L2
WH+A2
23.3
79.5 108.5 119.5 148.5 166.5
57
17
G¼
15
The dimension corresponds to the E value (piston rod extension) of the cylinder
Festo core product range
40
D1 Max.
= plus stroke length
qReady for dispatch from the Festo factory in 24 hours wReady for dispatch in 5 days maximum from stock è Internet: www.festo.com/catalogue/...
Subject to change – 2017/03
Electric cylinders ESBF, with spindle drive Accessories Stroke [mm]
A21)
10 … 100 101 … 200 201 … 300 301 … 400 401 … 500
46 70 82 107 119
Stroke [mm]
A21)
10 … 100 101 … 200 201 … 300 301 … 400 401 … 500
45 70 82 106 119
Stroke [mm]
A21)
10 … 100 101 … 200 201 … 300 301 … 400 401 … 500
48 73 85 109 122
1)
D1 Max.
D2
50 EE
L1
L2
WH+A2
93
17
G¼
21
29.4
82.5 106.5 118.5 143.5 155.5
D1 Max.
D2
63 EE
L1
L2
WH+A2
93
17
G¼
25
33.9
82 107 119 143 156
D1 Max.
D2
80 EE
L1
L2
WH+A2
42.9
94 119 131 155 168
93
17
G¼
31
The dimension corresponds to the E value (piston rod extension) of the cylinder
2017/03 – Subject to change
è Internet: www.festo.com/catalogue/...
41
Electric cylinders ESBF, with spindle drive Accessories Ordering data – Protective bellows kit An extended piston rod (order code …E) è page 24 is absolutely essen tial if a protective bellows kit is to be used.
The necessary dimensions for …E as a function of cylinder size and stroke as well as the corresponding protective bellows kit are indicated in the follow ing table:
Order example: Selected electric cylinder: ESBF-BS-63-250-5P-…E The dimension for the corresponding E value (see table): 82 mm Complete type code for electric cylinder: ESBF-BS-63-250-5P-82E The corresponding protective bellows kit: EADB-V2-63-S201-300
Cylinder data
Stroke
[mm]
[mm]
Dimension for …E [mm]
32
10 … 100 101 … 200 201 … 300 301 … 400 401 … 500
52 81 92 121 139
2828829 2828830 2828831 2828832 2828833
EADB-V2-32-S10-100 EADB-V2-32-S101-200 EADB-V2-32-S201-300 EADB-V2-32-S301-400 EADB-V2-32-S401-500
40
10 … 100 101 … 200 201 … 300 301 … 400 401 … 500
50 79 90 119 137
2828834 2828835 2828836 2828837 2828838
EADB-V2-40-S10-100 EADB-V2-40-S101-200 EADB-V2-40-S201-300 EADB-V2-40-S301-400 EADB-V2-40-S401-500
50
10 … 100 101 … 200 201 … 300 301 … 400 401 … 500
46 70 82 107 119
2828839 2828840 2828841 2828842 2828843
EADB-V2-50-S10-100 EADB-V2-50-S101-200 EADB-V2-50-S201-300 EADB-V2-50-S301-400 EADB-V2-50-S401-500
63
10 … 100 101 … 200 201 … 300 301 … 400 401 … 500
45 70 82 106 119
1488361 1488362 1488363 1488364 1488365
EADB-V2-63-S10-100 EADB-V2-63-S101-200 EADB-V2-63-S201-300 EADB-V2-63-S301-400 EADB-V2-63-S401-500
80
10 … 100 101 … 200 201 … 300 301 … 400 401 … 500
48 73 85 109 122
1489406 1489407 1489408 1489409 1489410
EADB-V2-80-S10-100 EADB-V2-80-S101-200 EADB-V2-80-S201-300 EADB-V2-80-S301-400 EADB-V2-80-S401-500
42
Protective bellows kit Part No. Type
è Internet: www.festo.com/catalogue/...
Subject to change – 2017/03
Electric cylinders ESBF, with spindle drive Accessories Materials: Plate: Anodised aluminium Clamping piece: Coated steel
Profile mounting EAHF
RoHS compliant
Fx
Dimensions and ordering data For size AH
B1
B2
B4
D1
H1
H2
L1
L2
L3
76 84.5 94 105 130 147
60 68 81 92 110 127
26 26 30 30 38 38
9 9 9 9 11 11
16 16 22.8 22.8 28.1 28.1
23.6 23.6 30.4 30.4 42.5 42.5
80 80 80 80 84 84
60 60 60 60 64 64
34 34 41 41 44 44
[mm] 32 40 50 63 80 100
32 36 44.5 50 62.5 71
For size
Transferable axial force Fx
[mm]
[kN]
32, 40 50, 63 80, 100
1.6 3.6 4.0
1)
CRC1)
Weight
Part No.
Type
[g] 3 3 3
218 340 570
w2838839 w1547781 1547780
EAHF-V2-32/40-P EAHF-V2-50/63-P EAHF-V2-80/100-P
Corrosion resistance class CRC 3 to Festo standard FN 940070 High corrosion stress. Outdoor exposure under moderate corrosive conditions. External visible parts with primarily functional requirements for the surface and which are in direct contact with a normal industrial environment.
Festo core product range
2017/03 – Subject to change
qReady for dispatch from the Festo factory in 24 hours wReady for dispatch in 5 days maximum from stock è Internet: www.festo.com/catalogue/...
43
Electric cylinders ESBF, with spindle drive Accessories Materials: HNC: Galvanised steel
Foot mounting HNC/CRHNC, for parallel motor attachment
CRHNC: High-alloy steel Free of copper and PTFE
-H-
2 Electric cylinder ESBF 3 Parallel kit EAMM-U 4 Motor EMME-AS/EMMS-AS
Dimensions and ordering data For size AB [mm] 32 40 50 63 80 100
AH
7 10 10 10 12 14.5
[mm]
EAMM-U-50
EAMM-U-60
32 40 50 63 80 100
217 – – – – –
228 257.5 – – – – ESBF-… CRC1)
[mm]
Max. load carry ing ability [kN]
32 40 50 63 80 100
0.9 1.5 2.5 4 6 9
2 2 2 2 2 2
1)
Weight [g] 144 193 353 436 829 1009
4 4 5 5 6 6
Part No. q174369 q174370 q174371 q174372 q174373 174374
= plus stroke length
AU
TR
±0.2
JS14
24 28 32 32 41 41
32 36 45 50 63 75
45–0.5 54–0.6 64–0.6 75–0.6 93–0.8 110 –0.8
EAMM-U-110
EAMM-U-145
– – 313.5 322 373 –
– – – – 390.5 415.5
XA With parallel kit EAMM-U-70 EAMM-U-86 236.5 266 298 – – –
+
– 270.5 302.5 311 – –
US
Type
ESBF-…-R3 CRC1) Weight [g]
Part No.
Type
HNC-32 HNC-40 HNC-50 HNC-63 HNC-80 HNC-100
4 4 4 4 4 4
176937 176938 176939 176940 176941 176942
CRHNC-32 CRHNC-40 CRHNC-50 CRHNC-63 CRHNC-80 CRHNC-100
139 188 341 424 809 990
Corrosion resistance class CRC 2 to Festo standard FN 940070 Moderate corrosion stress. Indoor applications in which condensation may occur. External visible parts with primarily decorative requirements for the surface and which are in direct contact with the ambient atmo sphere typical for industrial applications. Corrosion resistance class CRC 4 to Festo standard FN 940070 Particularly high corrosion stress. Outdoor exposure under extreme corrosive conditions. Parts exposed to aggressive media, for instance in the chemical or food industries. These applications may need to be suppor ted by special tests (è also FN 940082) using appropriate media.
Festo core product range
44
AT
6.5 9 9.5 12.5 15 17.5
For size
For size
The foot mounting can only be secured at the rear, on the parallel kit.
AO
32 36 45 50 63 71
Note
qReady for dispatch from the Festo factory in 24 hours wReady for dispatch in 5 days maximum from stock è Internet: www.festo.com/catalogue/...
Subject to change – 2017/03
Electric cylinders ESBF, with spindle drive Accessories Materials: High-alloy stainless steel
Flange mounting EAHH
RoHS compliant Free of copper and PTFE
2 Electric cylinder ESBF Dimensions and ordering data For size E [mm] 32 40 50 63 80 100
45 54 64 75 93 110
For size
Max. load carrying ability
[mm]
[kN]
32 40 50 63 80 100
1 3 5 7 12 17
1)
FB H13
js14
7 9 9 9 12 14
10 10 12 12 16 16
ESBF-…-R3 CRC1) 4 4 4 4 4 4
MF
R
TF
UF
W
1 32 36 45 50 63 75
Weight [g] 206 275 496 633 1360 1880
64 72 90 100 126 150
Part No. w2827587 w2827588 w2827589 w1502305 1502306 1502307
80 90 110 120 150 175
15.5 19.5 24.5 25 30 35
Type EAHH-V2-32-R1 EAHH-V2-40-R1 EAHH-V2-50-R1 EAHH-V2-63-R1 EAHH-V2-80-R1 EAHH-V2-100-R1
Corrosion resistance class CRC 4 to Festo standard FN 940070 Particularly high corrosion stress. Outdoor exposure under extreme corrosive conditions. Parts exposed to aggressive media, for instance in the chemical or food industries. These applications may need to be suppor ted by special tests (è also FN 940082) using appropriate media.
2017/03 – Subject to change
è Internet: www.festo.com/catalogue/...
45
Electric cylinders ESBF, with spindle drive Accessories Materials: ZNCF: Stainless steel casting CRZNG: Electropolished stainless steel casting
Trunnion flange ZNCF/CRZNG
2 Electric cylinder ESBF 3 Parallel kit EAMM-U Dimensions and ordering data For size C2
4 Motor EMME-AS/EMMS-AS + = plus stroke length
C3
TD e9
TL
86 105 117 136 156 189
12 16 16 20 20 25
12h14 16h14 16h14 20+0.5/–0.7 19.5+0.5/–0.7 24.5+0.5/–0.7
[mm] 32 40 50 63 80 100
71 87 99 116 136 164
For size [mm]
EAMM-U-50
EAMM-U-60
32 40 50 63 80 100
201 – – – – –
212 239.5 – – – –
For size
ESBF-… CRC1)
[mm]
Max. load carrying ability [kN]
32 40 50 63 80 100
0.9 1.5 2.5 4 6 9
2 2 2 2 2 2
1)
46
Free of copper and PTFE
TM H14
XL With parallel kit EAMM-U-70 EAMM-U-86 220.5 248 278 – – –
US
– 252.5 282.5 291 – –
50 63 75 90 110 132
45 54 64 75 93 110
EAMM-U-110
EAMM-U-145
– – 293.5 302 346 –
– – – – 363.5 393.5
Weight [g]
Part No.
Type
ESBF-…-R3 CRC1) Weight [g]
Part No.
Type
150 285 473 687 1296 2254
174411 174412 174413 174414 174415 174416
ZNCF-32 ZNCF-40 ZNCF-50 ZNCF-63 ZNCF-80 ZNCF-100
4 4 4 4 4 4
161852 161853 161854 161855 161856 161857
CRZNG-32 CRZNG-40 CRZNG-50 CRZNG-63 CRZNG-80 CRZNG-100
150 285 473 687 1296 2254
Corrosion resistance class CRC 2 to Festo standard FN 940070 Moderate corrosion stress. Indoor applications in which condensation may occur. External visible parts with primarily decorative requirements for the surface and which are in direct contact with the ambient atmo sphere typical for industrial applications. Corrosion resistance class CRC 4 to Festo standard FN 940070 Particularly high corrosion stress. Outdoor exposure under extreme corrosive conditions. Parts exposed to aggressive media, for instance in the chemical or food industries. These applications may need to be suppor ted by special tests (è also FN 940082) using appropriate media.
è Internet: www.festo.com/catalogue/...
Subject to change – 2017/03
Electric cylinders ESBF, with spindle drive Accessories Trunnion support LNZG Materials: Trunnion support: Anodised aluminium Plain bearing: Plastic Free of copper and PTFE
Dimensions and ordering data For size Max. load carrying ability [mm] [kN]
CR D11
DA H13
±0.1
32 40, 50 63, 80 100
12 16 20 25
11 15 18 20
15 18 20 25
TH
UL
For size
0.9 2.5 6 9 KE
NH
[mm] 32 40, 50 63, 80 100 1)
FK
CRC1)
±0.2 6.8 9 11 13
18 21 23 28.5
32 36 42 50
FN
FS
H1
HB H13
30 36 40 50
10.5 12 13 16
15 18 20 24.5
6.6 9 11 14
Weight
Part No.
Type
32959 32960 32961 32962
LNZG-32 LNZG-40/50 LNZG-63/80 LNZG-100/125
[g] 46 55 65 75
2 2 2 2
83 129 178 306
Corrosion resistance class CRC 2 to Festo standard FN 940070 Moderate corrosion stress. Indoor applications in which condensation may occur. External visible parts with primarily decorative requirements for the surface and which are in direct contact with the ambient atmo sphere typical for industrial applications.
2017/03 – Subject to change
è Internet: www.festo.com/catalogue/...
47
Electric cylinders ESBF, with spindle drive Accessories Trunnion support CRLNZG Materials: High-alloy steel Free of copper and PTFE
Dimensions and ordering data For size Max. load carrying ability [mm] [kN]
CR D11
±0.1
32 40/50 63, 80 100
12 16 20 25
15 18 20 25
For size
0.9 2.5 6 9 NH
[mm] 32 40/50 63, 80 100 1)
48
TH
FK
UL
CRC1)
±0.2 18 21 23 28.5
32 36 42 50
FN
FS
H1
HB H13
30 36 40 50
10.5 12 13 16
15 18 20 24.5
6.6 9 11 14
Weight
Part No.
Type
161874 161875 161876 161877
CRLNZG-32 CRLNZG-40/50 CRLNZG-63/80 CRLNZG-100/125
[g] 46 55 65 75
4 4 4 4
205 323 435 739
Corrosion resistance class CRC 4 to Festo standard FN 940070 Particularly high corrosion stress. Outdoor exposure under extreme corrosive conditions. Parts exposed to aggressive media, for instance in the chemical or food industries. These applications may need to be suppor ted by special tests (è also FN 940082) using appropriate media.
è Internet: www.festo.com/catalogue/...
Subject to change – 2017/03
Electric cylinders ESBF, with spindle drive Accessories Materials: Aluminium
Swivel flange DAMS
RoHS compliant Free of copper and PTFE
2 Electric cylinder ESBF 3 Parallel kit EAMM-U Dimensions and ordering data For size DB [mm] 40 50 63 80 100
6.5 8.5 8.5 10.5 10.5
4 Motor EMME-AS/EMMS-AS + = plus stroke length
E
FB
FL
TG
W Max. [°]
63 73 83 103 127
52 60 70 90 110
25 27 32 36 41
38 46.5 56.5 72 89
32 45 42 31 36
For size [mm]
EAMM-U-60
EAMM-U-70
XC With parallel kit EAMM-U-86
40 50 63 80 100
254.5 – – – –
263 293 – – –
267.5 297.5 311 – –
For size
Max. load carrying ability
[mm]
[kN]
40 50 63 80 100
3 5 7 12 17
1)
CRC1)
Weight
EAMM-U-110
EAMM-U-145
– 308.5 322 368 –
– – – 385.5 415.5
Part No.
Type
2787470 2787651 1555443 1556588 1560237
DAMS-K-V1-40-V-R3 DAMS-K-V1-50-V-R3 DAMS-K-V1-63-V-R3 DAMS-K-V1-80-V-R3 DAMS-K-V1-100-V-R3
[g] 3 3 3 3 3
258 451 657 1240 1940
Corrosion resistance class CRC 3 to Festo standard FN 940070 High corrosion stress. Outdoor exposure under moderate corrosive conditions. External visible parts with primarily functional requirements for the surface and which are in direct contact with a normal industrial environment.
-H-
Note
The swivel flange SNCS or SNCB (max. load carrying ability of 1 kN) can be used for size 32.
2017/03 – Subject to change
è Internet: www.festo.com/catalogue/...
49
Electric cylinders ESBF, with spindle drive Accessories Materials: Die-cast aluminium
Swivel flange SNC
Free of copper and PTFE RoHS compliant
1 The king pin is protected against rotation with a spring pin Dimensions and ordering data For size CG
CP
[mm]
H14
H14
32 40 50 63 80 100
14 16 21 21 25 25
34 40 45 51 65 75
E
EK H9
±0.2
45+0.2/–0.5 54–0.5 64–0.6 75–0.6 93–0.8 110 +0.3/–0.8
10 12 16 16 20 20
22 25 27 32 36 41
For size [mm]
EAMM-U-50
EAMM-U-60
32 40 50 63 80 100
215 – – – – –
226 254.5 – – – –
For size
Max. load carrying ability
[mm]
[kN]
32 40 50 63 80 100
0.9 1.5 2.5 4 6 9
1)
FL
XC With parallel kit EAMM-U-70 EAMM-U-86 234.5 263 293 – – –
CRC1)
Weight
+
= plus stroke length
L
SR
TG
13 16 16 21 22 27
10 12 12 16 16 20
32.5 38 46.5 56.5 72 89
EAMM-U-110
EAMM-U-145
– – 308.5 322 368 –
– – – 385.5 415.5
– 267.5 297.5 311 – – Part No.
Type
[g] 2 2 2 2 2 2
93 140 234 331 618 865
q174383 q174384 q174385 q174386 q174387 174388
SNC-32 SNC-40 SNC-50 SNC-63 SNC-80 SNC-100
Corrosion resistance class CRC 2 to Festo standard FN 940070 Moderate corrosion stress. Indoor applications in which condensation may occur. External visible parts with primarily decorative requirements for the surface and which are in direct contact with the ambient atmo sphere typical for industrial applications.
Festo core product range
50
2 Electric cylinder ESBF 3 Parallel kit EAMM-U 4 Motor EMME-AS/EMMS-AS
qReady for dispatch from the Festo factory in 24 hours wReady for dispatch in 5 days maximum from stock è Internet: www.festo.com/catalogue/...
Subject to change – 2017/03
Electric cylinders ESBF, with spindle drive Accessories CRSNCS 63 … 80: Stainless steel casting SNCS-…-R3 100: Wrought aluminium alloy with protective coating RoHS-compliant
Material: SNCS 63 … 80: Die-cast aluminium SNCS 100: Wrought aluminium alloy
Swivel flange SNCS/CRSNCS/SNCS-…-R3
2 Electric cylinder ESBF 3 Parallel kit EAMM-U Dimensions and ordering data For size CN [mm] ESBF-… ESBF-…-R3 32 40 50 63 80 100
10+0.013 12+0.015 16+0.015 16+0.015 20+0.018 20+0.018
For size
10+0.015/–0.04 12+0.018/–0.04 16+0.018/–0.04 16+0.018/–0.04 20+0.021/–0.04 20+0.021/–0.04
E ESBF-… 45+0.2/–0.5 54–0.5 64–0.6 75–0.6 93–0.8 109 +1/–0.7
RA +1 ESBF-…
ESBF-…-R3
32 40 50 63 80 100
14.5 17.5 18.5 23 25 95
14.5 17.5 19 23 25 100
32.5 38 46.5 56.5 72 89
[mm]
Max. load SNCS… carrying ability CRC1) [kN]
Weight [g]
32 40 50 63 80 100
1 1.5 2.5 4 6 9
86 122 216 281 557 683
1)
EP ESBF-…-R3 45+0.2/–0.5 54–0.5 64–0.6 75–0.6 93–0.6 109 –0.8
EX
10.5 12 15 15 18 18
14 16 21 21 25 25
2 2 2 2 2 2
EAMM-U-50
EAMM-U-60
215 – – – – –
226 254.5 – – – –
Part No. q174397 q174398 q174399 q174400 q174401 174402
FL
±0.2
TG
[mm]
For size
4 Motor EMME-AS/EMMS-AS + = plus stroke length
LT
±0.2
ESBF-…
ESBF-…-R3
22 25 27 32 36 41
15+0.5
15+0.5 17+0.5 20+0.5 22+0.5 27+0.5 30±0.5
13 16 16 21 22 27
XC With parallel kit EAMM-U-70 EAMM-U-86 234.5 263 293 – – –
MS
– 267.5 297.5 311 – –
17+0.5 20+0.5 23–0.5 28–0.5 30±0.5
EAMM-U-110
EAMM-U-145
– – 308.5 322 368 –
– – – – 385.5 415.5
Type
High corrosion protection CRC1) Weight [g]
Part No.
Type
SNCS-32 SNCS-40 SNCS-50 SNCS-63 SNCS-80 SNCS-100
4 4 4 4 4 3
2895920 2895921 2895922 2895923 2895924 2895925
CRSNCS-32 CRSNCS-40 CRSNCS-50 CRSNCS-63 CRSNCS-80 SNCS-100-R3
161 239 403 576 1173 684
Corrosion resistance class CRC 2 to Festo standard FN 940070 Moderate corrosion stress. Indoor applications in which condensation may occur. External visible parts with primarily decorative requirements for the surface and which are in direct contact with the ambient atmo sphere typical for industrial applications.
Festo core product range
2017/03 – Subject to change
qReady for dispatch from the Festo factory in 24 hours wReady for dispatch in 5 days maximum from stock è Internet: www.festo.com/catalogue/...
51
Electric cylinders ESBF, with spindle drive Accessories Materials: Die-cast aluminium
Swivel flange SNCL
Free of copper and PTFE RoHS compliant
2 Electric cylinder ESBF 3 Parallel kit EAMM-U Dimensions and ordering data For size CD [mm] H9 32 40 50 63 80 100
10 12 12 16 16 20
E
45+0.2/–0.5 54–0.5 64–0.6 75–0.6 93–0.8 110+0.3/–0.8
For size [mm]
EAMM-U-50
EAMM-U-60
32 40 50 63 80 100
215 – – – – –
226 254.5 – – – –
For size
Max. load carrying ability
[mm]
[kN]
32 40 50 63 80 100
0.9 1.5 2.5 4 6 9
1)
EW
FL
–0.2/–0.6
±0.2
26 28 32 40 50 60
22 25 27 32 36 41 XC With parallel kit EAMM-U-70 EAMM-U-86 234.5 263 293 – – –
CRC1)
Weight
L
MR
TG
13 16 16 21 22 27
10 12 12 16 16 20
32.5 38 46.5 56.5 72 89
EAMM-U-110
EAMM-U-145
– – 308.5 322 368 –
– – – 385.5 415.5
– 267.5 297.5 311 – – Part No.
Type
[g] 2 2 2 2 2 2
71 95 158 225 436 606
q174404 q174405 q174406 q174407 q174408 174409
SNCL-32 SNCL-40 SNCL-50 SNCL-63 SNCL-80 SNCL-100
Corrosion resistance class CRC 2 to Festo standard FN 940070 Moderate corrosion stress. Indoor applications in which condensation may occur. External visible parts with primarily decorative requirements for the surface and which are in direct contact with the ambient atmo sphere typical for industrial applications.
Festo core product range
52
4 Motor EMME-AS/EMMS-AS + = plus stroke length
qReady for dispatch from the Festo factory in 24 hours wReady for dispatch in 5 days maximum from stock è Internet: www.festo.com/catalogue/...
Subject to change – 2017/03
Electric cylinders ESBF, with spindle drive Accessories Materials: SNCB: Die-cast aluminium SNCB-…-R3: Die-cast aluminium with protective coating, high corrosion protection
Swivel flange SNCB/SNCB-…-R3
Free of copper and PTFE RoHS compliant
2 Electric cylinder ESBF 3 Parallel kit EAMM-U Dimensions and ordering data For size CB [mm]
H14
32 40 50 63 80 100
26 28 32 40 50 60
E
EK e8
±0.2
45+0.2/–0.5 54–0.5 64–0.6 75–0.6 93–0.8 110+0.3/–0.8
10 12 12 16 16 20
22 25 27 32 36 41
For size [mm]
EAMM-U-50
EAMM-U-60
32 40 50 63 80 100
215 – – – – –
226 254.5 – – – –
For size
ESBF-… CRC1)
[mm]
Max. load carrying ability [kN]
32 40 50 63 80 100
1 1.5 2.5 4 6 9
2 2 2 2 2 2
1)
4 Motor EMME-AS/EMMS-AS + = plus stroke length
Weight [g] 103 155 232 375 636 1035
FL
L
MR
q174390 q174391 q174392 q174393 q174394 174395
H14
8.5 12 12 16 16 20
XC With parallel kit EAMM-U-70 EAMM-U-86
Part No.
UB
–0.5 13 16 16 21 22 27
234.5 263 293 – – –
TG
32.5 38 46.5 56.5 72 89
45 52 60 70 90 110
EAMM-U-110
EAMM-U-145
– – 308.5 322 368 –
– – – – 385.5 415.5
– 267.5 297.5 311 – –
Type
ESBF-…-R3 CRC1) Weight [g]
Part No.
Type
SNCB-32 SNCB-40 SNCB-50 SNCB-63 SNCB-80 SNCB-100
3 3 3 3 3 3
176944 176945 176946 176947 176948 176949
SNCB-32-R3 SNCB-40-R3 SNCB-50-R3 SNCB-63-R3 SNCB-80-R3 SNCB-100-R3
100 151 228 371 632 986
Corrosion resistance class CRC 2 to Festo standard FN 940070 Moderate corrosion stress. Indoor applications in which condensation may occur. External visible parts with primarily decorative requirements for the surface and which are in direct contact with the ambient atmo sphere typical for industrial applications. Corrosion resistance class CRC 3 to Festo standard FN 940070 High corrosion stress. Outdoor exposure under moderate corrosive conditions. External visible parts with primarily functional requirements for the surface and which are in direct contact with a normal industrial environment.
Festo core product range
2017/03 – Subject to change
qReady for dispatch from the Festo factory in 24 hours wReady for dispatch in 5 days maximum from stock è Internet: www.festo.com/catalogue/...
53
Electric cylinders ESBF, with spindle drive Accessories Trunnion mounting kit DAMT
Materials: Galvanised steel
The kit can be mounted at any posi tion along the cylinder profile barrel. The trunnion mounting kit cannot be
mounted in the vicinity of the motor when used in combination with the parallel kit EAMM-U.
Free of copper and PTFE RoHS compliant
1 Max. tightening torque 2 Electric cylinder ESBF Dimensions and ordering data For size B1
C3
TD e9
TL
TM
UW
XG
86 105 117 136 156 189
12 16 16 20 20 25
12 16 16 20 20 25
50 63 75 90 110 132
65 75 95 105 130 145
66 75.5 83.5 90.5 107 114
32 40 50 63 80 100
30 32 34 41 44 48
71 87 99 116 136 164
For size
XJ
XV
107.5 127.5 152.5 154.5 189 212
86.8 101.5 118 122.5 148 163
[mm]
1)
Max. tightening torque [Nm]
Max. load carrying ability [kN]
CRC1)
4+1 8+1 8+2 18+2 28+2 28+2
0.9 1.5 2.5 4 6 9
1 1 1 1 1 1
Weight
Part No.
Type
[g] 212.7 387.5 607.6 910.5 1493.7 2094.8
q2213233 q2214899 q2214909 q2214971 q163529 163530
DAMT-V1-32-A DAMT-V1-40-A DAMT-V1-50-A DAMT-V1-63-A DAMT-V1-80-A DAMT-V1-100-A
Corrosion resistance class CRC 1 to Festo standard FN 940070 Low corrosion stress. For dry indoor applications or transport and storage protection. Also applies to parts behind covers, in the non-visible interior area, and parts which are covered in the application (e.g. drive trunnions).
Festo core product range
54
+ = plus stroke length +½ = plus stroke length
C2
[mm]
32 40 50 63 80 100
3 Axial kit EAMM-A
qReady for dispatch from the Festo factory in 24 hours wReady for dispatch in 5 days maximum from stock è Internet: www.festo.com/catalogue/...
Subject to change – 2017/03
Electric cylinders ESBF, with spindle drive Accessories Ordering data – Mounting attachments Designation For size Max. load carrying ability [kN]
Part No.
Type
Clevis foot LNG
Designation
For size
Technical data è Internet: clevis foot Max. load Part No. Type carrying ability [kN]
Clevis foot LSN 32 40 50 63 80 100
0.9 1.5 2.5 4 6 9
q33890 q33891 q33892 q33893 q33894 33895
32 40 50 63 80 100
0.9 1.5 2.5 4 6 9
31740 31741 31742 31743 31744 31745
32 40 50 63 80 100
0.9 1.5 2.5 4 6 9
31761 31762 31763 31764 31765 31766
32 40 50 63 80 100
0.9 1.5 2.5 4 6 9
5561 5562 5563 5564 5565 5566
LSN-32 LSN-40 LSN-50 LSN-63 LSN-80 LSN-100
LSNG-32 LSNG-40 LSNG-50 LSNG-63 LSNG-80 LSNG-100
Clevis foot LSNSG 32 40 50 63 80 100
0.9 1.5 2.5 4 6 9
31747 31748 31749 31750 31751 31752
LSNSG-32 LSNSG-40 LSNSG-50 LSNSG-63 LSNSG-80 LSNSG-100
LBG-32 LBG-40 LBG-50 LBG-63 LBG-80 LBG-100
Right-angle clevis foot LQG 32 40 50 63 80 100
0.9 1.5 2.5 4 6 9
31768 31769 31770 31771 31772 31773
LQG-32 LQG-40 LQG-50 LQG-63 LQG-80 LQG-100
LNG-32 LNG-40 LNG-50 LNG-63 LNG-80 LNG-100
Clevis foot LSNG
Clevis foot LBG
Ordering data – Mounting attachments, corrosion-resistant Designation For size Clevis foot CRLNG 32 40 50 63 80 100
Max. load carrying ability [kN] 0.9 1.5 2.5 4 6 9
Technical data è Internet: clevis foot Part No. Type
161840 161841 161842 161843 161844 161845
Ordering data – Mounting attachments, high corrosion protection Designation For size Max. load carrying ability [kN]
CRLNG-32 CRLNG-40 CRLNG-50 CRLNG-63 CRLNG-80 CRLNG-100
Technical data è Internet: clevis foot Part No. Type
Clevis foot LBG 32 40 50 63 80 100
Festo core product range
2017/03 – Subject to change
0.9 1.5 2.5 4 6 9
2078790 2078792 2078794 2078795 2078797 2078799
LBG-32-R3 LBG-40-R3 LBG-50-R3 LBG-63-R3 LBG-80-R3 LBG-100-R3
qReady for dispatch from the Festo factory in 24 hours wReady for dispatch in 5 days maximum from stock è Internet: www.festo.com/catalogue/...
55
Electric cylinders ESBF, with spindle drive Accessories Ordering data – Piston-rod attachments Designation For size Max. load carrying ability [kN]
Part No.
Type
Rod eye SGS
For size
Technical data è Internet: piston-rod attachment Max. load Part No. Type carrying ability [kN]
Rod clevis SGA 32 40 50, 63 80, 100
0.9 1.5 4 9
q9261 q9262 q9263 q9264
SGS-M10x1,25 SGS-M12x1,25 SGS-M16x1,5 SGS-M20x1,5
32 40 50, 63 80, 100
0.9 1.5 4 9
q6144 q6145 q6146 q6147
SG-M10x1,25 SG-M12x1,25 SG-M16x1,5 SG-M20x1,5
Coupling piece KSZ 32 40 50, 63 80, 100
0.9 1.5 4 9
Rod clevis SG
36125 36126 36127 36128
32 40 50, 63 80, 100
0.9 1.5 4 9
Self-aligning rod coupler FK 32 0.9 40 1.5 50, 63 4 80, 100 9
32954 10767 10768 10769
q6140 q6141 q6142 q6143
SGA-M10x1,25 SGA-M12x1,25 SGA-M16x1,5 SGA-M20x1,5
FK-M10x1,25 FK-M12x1,25 FK-M16x1,5 FK-M20x1,5
KSZ-M10x1,25 KSZ-M12x1,25 KSZ-M16x1,5 KSZ-M20x1,5
Ordering data – Piston-rod attachments, corrosion-resistant Designation For size Max. load Part No. Type carrying ability [kN] Rod eye CRSGS
Designation
For size
Technical data è Internet: piston-rod attachment Max. load Part No. Type carrying ability [kN]
Rod clevis CRSG 32 40 50, 63 80, 100
0.9 1.5 4 9
Self-aligning rod coupler CRFK 32 0.9 40 1.5 50, 63 4 80.10 9
Festo core product range
56
Designation
195582 195583 195584 195585
CRSGS-M10x1,25 CRSGS-M12x1,25 CRSGS-M16x1,5 CRSGS-M20x1,5
2305778 2305779 2490673 2545677
CRFK-M10x1,25 CRFK-M12x1,25 CRFK-M16x1,5 CRFK-M20x1,5
32 40 50, 63 80, 100
0.9 1.5 4 9
13569 13570 13571 13572
CRSG-M10x1,25 CRSG-M12x1,25 CRSG-M16x1,5 CRSG-M20x1,5
qReady for dispatch from the Festo factory in 24 hours wReady for dispatch in 5 days maximum from stock è Internet: www.festo.com/catalogue/...
Subject to change – 2017/03
Electric cylinders ESBF, with spindle drive Accessories Ordering data – Guide units Stroke [mm]
-H-
Technical data è Internet: eagf Part No.
Type
Stroke [mm]
Part No.
Type
For size 32 10 … 100 10 … 200 10 … 320 10 … 400 1 … 500
w2782679 w2782818 w2782885 w2782923 w3038083
EAGF-V2-KF-32-100 EAGF-V2-KF-32-200 EAGF-V2-KF-32-320 EAGF-V2-KF-32-400 EAGF-V2-KF-32-
For size 40 10 … 100 10 … 200 10 … 320 10 … 400 1 … 500
w2782939 w2782976 w2783047 w2783080 w3038089
EAGF-V2-KF-40-100 EAGF-V2-KF-40-200 EAGF-V2-KF-40-320 EAGF-V2-KF-40-400 EAGF-V2-KF-40-
For size 50 10 … 100 10 … 200 10 … 320 10 … 400 1 … 500
w2783639 w2784152 w2784164 w2784184 w3038094
EAGF-V2-KF-50-100 EAGF-V2-KF-50-200 EAGF-V2-KF-50-320 EAGF-V2-KF-50-400 EAGF-V2-KF-50-
For size 63 10 … 100 10 … 200 10 … 320 10 … 400 1 … 500
w1725842 w1725843 w1725844 w1725845 w2608521
EAGF-V2-KF-63-100 EAGF-V2-KF-63-200 EAGF-V2-KF-63-320 EAGF-V2-KF-63-400 EAGF-V2-KF-63-
For size 80 10 … 100 10 … 200 10 … 320 10 … 400 1 … 500
1725846 1725847 1725848 1725849 2608528
EAGF-V2-KF-80-100 EAGF-V2-KF-80-200 EAGF-V2-KF-80-320 EAGF-V2-KF-80-400 EAGF-V2-KF-80-
For size 100 10 … 100 10 … 200 10 … 320 10 … 400 1 … 500
1725850 1725851 1725852 1725853 2608532
EAGF-V2-KF-100-100 EAGF-V2-KF-100-200 EAGF-V2-KF-100-320 EAGF-V2-KF-100-400 EAGF-V2-KF-100-
Note
The length of the guide unit must be correspondingly longer for cylinders with piston rod extensions.
Festo core product range
2017/03 – Subject to change
qReady for dispatch from the Festo factory in 24 hours wReady for dispatch in 5 days maximum from stock è Internet: www.festo.com/catalogue/...
57
Electric cylinders ESBF, with spindle drive Accessories Sensor mounting The sensor mountings can only be attached within the highlighted area due to the asymmetry of the internal magnets.
The proximity sensors may not switch reliably if they are mounted outside of this area.
L3
Size
L1
L2
L3
32 40 50 63 80 100
26 30 30 33 39 39
48 65 84 99 132 151
22.3 26.5 31.5 37 46 54.5
Ordering data – Sensor mounting for T-slot For Description
Length [mm]
Part No.
Type
50 100
1600093 1600118
SAMH-N8-SR-50 SAMH-N8-SR-100
Sensor rail 32 … 100
For proximity sensor SMT/CRSMT-8 The sensor rail is glued onto the cylinder
32 … 100
For proximity sensor SMT/CRSMT-8 35 The overall length corresponds to the length of the sens ing range plus an adjustment range of approx. 10 mm for the proximity sensors The kit is glued onto the cylinder
525565
CRSMB-8-32/100
32, 40 50, 63 80, 100
For proximity sensor SMT/CRSMT-8 The kit is fastened to the profile by means of two screws
175705 175706 175707
SMB-8-FENG-32/40 SMB-8-FENG-50/63 SMB-8-FENG-80/100
Mounting kit
Mounting kit
58
è Internet: www.festo.com/catalogue/...
27
Subject to change – 2017/03
Electric cylinders ESBF, with spindle drive Accessories Technical data è Internet: smt
Ordering data – Proximity sensor for T-slot, magneto-resistive Type of mounting Switching Electrical connection output
Cable length [m]
Part No.
Type
N/O contact Insertable in the slot from PNP above, flush with the mounting kit, short design NPN
Cable, 3-wire Plug M8x1, 3-pin Plug M12x1, 3-pin Cable, 3-wire Plug M8x1, 3-pin
2.5 0.3 0.3 2.5 0.3
q574335 q574334 q574337 q574338 q574339
SMT-8M-A-PS-24V-E-2,5-OE SMT-8M-A-PS-24V-E-0,3-M8D SMT-8M-A-PS-24V-E-0,3-M12 SMT-8M-A-NS-24V-E-2,5-OE SMT-8M-A-NS-24V-E-0,3-M8D
Insertable in the slot from PNP above, flush with the mounting kit, short design
Cable, 3-wire
7.5
q574340
SMT-8M-A-PO-24V-E-7,5-OE
N/C contact
Cable length [m]
Part No.
Technical data è Internet: crsmt Type
5 0.3 0.3
574380 574382 574383
CRSMT-8M-PS-24V-K-5,0-OE CRSMT-8M-PS-24V-K-0,3-M12 CRSMT-8M-PS-24V-K-0,3-M8D
Electrical connection, right
Cable length [m]
Part No.
Technical data è Internet: nebu Type
Straight socket, M8x1, 3-pin
Cable, open end, 3-wire
Straight socket, M12x1, 5-pin
Cable, open end, 3-wire
Angled socket, M8x1, 3-pin
Cable, open end, 3-wire
Angled socket, M12x1, 5-pin
Cable, open end, 3-wire
2.5 5 2.5 5 2.5 5 2.5 5
Ordering data – Proximity sensor for T-slot, magneto-resistive, corrosion resistant Type of mounting Switching Electrical connection output N/O contact Insertable in the slot from above, flush with the mounting kit
PNP
Ordering data – Connecting cables Electrical connection, left
Ordering data – Blanking screws, corrosion-resistant For Material
Cable, 3-wire Plug connector M12x1, 3-pin Plug connector M8x1, 3-pin
CRC1)
Weight
q541333 q541334 q541363 q541364 q541338 q541341 541367 541370
NEBU-M8G3-K-2.5-LE3 NEBU-M8G3-K-5-LE3 NEBU-M12G5-K-2.5-LE3 NEBU-M12G5-K-5-LE3 NEBU-M8W3-K-2.5-LE3 NEBU-M8W3-K-5-LE3 NEBU-M12W5-K-2.5-LE3 NEBU-M12W5-K-5-LE3
Part No.
Type
PU2)
1355016 650121 1355026
DAMD-PS-M6-12-R1 DAMD-PS-M8-16-R1 DAMD-PS-M10-16-R1
4
[g] 32, 40 50, 63 80, 100 1)
2)
High-alloy steel
3 3 3
6.5 17.5 23
Corrosion resistance class CRC 3 to Festo standard FN 940070 High corrosion stress. Outdoor exposure under moderate corrosive conditions. External visible parts with primarily functional requirements for the surface and which are in direct contact with a normal industrial environment. Packaging unit
Festo core product range
2017/03 – Subject to change
qReady for dispatch from the Festo factory in 24 hours wReady for dispatch in 5 days maximum from stock è Internet: www.festo.com/catalogue/...
59
