Electrical Brochure (Page 2)
Goto to Main PDF Menu
NUTS/HANGERS NUTS Part Number
Thread WT. Size Lbs/C
P10061420 P1007 P1008 P1009 P1010
1/4" 5/16" 3/8" 7/16" 1/2"
Part Number
P40061420 P4007 P4008 P4009 P4010
20 7 18 6 16 10 14 9 13 12
P1012S 5/8" 11 21 P1023S 3/4" 10 21 P1024S 7/8" 9 21
Thread Size
1/4" 5/16" 3/8" 7/16" 1/2"
Part Number
WT. Lbs/C
20 18 16 14 13
7 6 9 9 8
P4012S 5/8" 11 P4023S 3/4" 10
11 11
P30160632 0832 1024 1420
#6 #8 #10 1/4"
WT. Lbs/C
32 32 24 20
2 2 4 4
for P3300, P4000 & P5000 channels Part Thread WT. Number Size Lbs/C
P55061420 1/4" P5507 5/16" P5508 3/8" P5509 7/16" P5510 1/2"
for P3300, P4000 channels
for P1000, P1100, P2000 & P3000 channels
Thread Size
20 18 16 14 13
1 6 10 10 12
for P5500 channel
FLUORESCENT FIXTURE HANGERS P2537 P5537
1
⁄4" X 1" RHMS and
Sq. Nut Included
Part Use With Number Channel
P2537 A
1 5⁄8" (41.3) 9
⁄32" (7.1) Dia. Hole
Hanger provides more than 1/2" (12.7) space between channel and fixtures. Design Load Material: 18 gage (1.2) 120 Lbs. (.5 kN)
P1000 P1100 P2000 P3000
In
“A” mm
Weight/C Lbs kg
2 7/16
61.9
19
8.6
P5537
P5500
3 1/4
82.6
22 10.0
P2539
P1000 P1100 P2000
1 3/4
44.5
17
P3539
P3000
1 1/2
38.1
15
6.8
P5539
P5500
2 9/16
65.1
18
8.2
1 ⁄4" X 1" RHMS and Sq. Nut Included
P2539 P3539 P5539
A
5
Design Load 120 Lbs. (.5 kN)
1 ⁄8" (41.3)
7.7
1
⁄4" X 3⁄4"
Carriage Bolt and Sq. Nut Included
Hanger provides more than 1/8" (3.2) space between channel and fixtures. Material: 18 gage (1.2)
RACEWAY HANGERS P2755 P2756 P2757
A
Part Number
4 1⁄4" (108.0)
Design Load 120 Lbs. (.5 kN)
Use with channels: P1001, P1101, P2001, P5000 and P5500. Material: 14 gage (1.9)
9
⁄32" (7.1) Sq. Hole
“A” mm
Weight/C Lbs kg
P2755 9/16 P2756 7/8 P2757 13/32
14.3 22.2 10.3
44 44 44
20 20 20
P2855 9/16 P2856 7/8 P2857 13/32
14.3 22.2 10.3
32 32 32
14.5 14.5 14.5
In
P2855 P2856 P2867
A
2 3⁄4" (69.9)
9
⁄32" (7.1) Sq. Hole
Design Load 120 Lbs. (.5 kN)
Use with channels: P1000, P1100, P2000, P3000, P3300, P4000, P4001, P4100 and P4101. Material: 14 gage (1.9)
FINISHES Pregalvanized channel is coated with zinc by hot-dipped process prior to roll forming of press operations. The zinc weight coating is 0.45 oz./side per square foot of material conforming to ASTM specification A-653. Electro-galvanized parts, screws and nuts are coated with zinc electrolytically to commercial standards. (Federal Specification No. QQ-Z-325A.) Hot-dipped galvanized material is coated with zinc after being roll formed or after all manufacturing operations are completed. The zinc weight is 2 oz. per square foot of surface conforming to ASTM specifications Nos. A-123 and/or A-153. Nuts, bolts and pipe clamps are electro-galvanized. (Alternate finishes may be specified, such as pregalvanized finish and hot-dipped galvanized finish for various parts of the metal framing system. Refer to Unistrut General Engineering Catalog #12 and supplementary bulletins for the availability and appropriateness of the finish for various parts.)
7
Goto to Main PDF Menu
GENERAL FITTINGS
Electrical Fittings
Pipe/Conduit Supports
General Fittings
Nuts & Hardware
1 5/8" Channels
FOR 15⁄8" (41 MM) WIDTH SERIES CHANNEL
Page Flat Plate Fittings
82
Ninety Degree Fittings
86
Angular Fittings
93
“Z” Shape Fittings
94
“U” Shape Fittings
96
Wing Shape Fittings
101
Post Bases Brackets and Braces Beam Clamps Trolleys Special Application Fittings
Index
Spec. Metals & Fiberglass
13⁄16"
Framing System
11⁄4" Framing System
Concrete Inserts
End Caps Partition and Display Fittings
105 106 112 122 124 126 127
MATERIAL Fittings, unless noted, are made from hot-rolled, pickled and oiled steel plates, strip or coil, and conform to ASTM specifications A575, A576, A635, or A36. The fitting steel also meets the physical requirements of ASTM A570 GR 33. The pickling of the steel produces a smooth surface free from scale. Many fittings are also available in stainless steel, aluminum and fiberglass. Consult factory for ordering information. FINISHES Fittings are available in: PermaGreen II (GR), electro-galvanized
(EG), conforming to ASTM B633 Type III SC1; Hot-dipped galvanized (HG), conforming to ASTM A123 or A153 and plain (PL). APPLICATION All parts drawings illustrate only one application of each fitting. In most cases many other applications are possible. The channels shown in the illustrations are P1000, 15⁄8" square, except where noted otherwise. All 9⁄16" diameter holes use 1 ⁄2" x 15⁄16" hex head cap screws and 1⁄2" nuts – P1010, P4010 or P5510 – depending on the channel used. Nuts and bolts are not included with the fitting and must be ordered separately.
DESIGN BOLT TORQUE BOLT SIZE FOOT LBS. N.m
1⁄4" 20
5
⁄8"
5⁄16" 18
3⁄8" 16
1⁄2" 13
11
3⁄4" 10
6
11
19
50
100
125
8
15
25
70
135
170
DIMENSIONS Imperial dimensions are illustrated in inches. Metric dimensions are shown in parenthesis or as noted. Unless noted, all metric dimensions are in millimeters and rounded to one decimal place. DESIGN LOAD Design load data, where shown, is based on the ultimate strength of the connection with a safety factor of 2.5, unless otherwise noted.
80
Return to #12 TOC
NUTS/HANGERS NUTS Part Number
Thread WT. Size Lbs/C
P10061420 P1007 P1008 P1009 P1010
1/4" 5/16" 3/8" 7/16" 1/2"
Part Number
P40061420 P4007 P4008 P4009 P4010
20 7 18 6 16 10 14 9 13 12
P1012S 5/8" 11 21 P1023S 3/4" 10 21 P1024S 7/8" 9 21
Thread Size
1/4" 5/16" 3/8" 7/16" 1/2"
Part Number
WT. Lbs/C
20 18 16 14 13
7 6 9 9 8
P4012S 5/8" 11 P4023S 3/4" 10
11 11
P30160632 0832 1024 1420
#6 #8 #10 1/4"
WT. Lbs/C
32 32 24 20
2 2 4 4
for P3300, P4000 & P5000 channels Part Thread WT. Number Size Lbs/C
P55061420 1/4" P5507 5/16" P5508 3/8" P5509 7/16" P5510 1/2"
for P3300, P4000 channels
for P1000, P1100, P2000 & P3000 channels
Thread Size
20 18 16 14 13
1 6 10 10 12
for P5500 channel
FLUORESCENT FIXTURE HANGERS P2537 P5537
1
⁄4" X 1" RHMS and
Sq. Nut Included
Part Use With Number Channel
P2537 A
1 5⁄8" (41.3) 9
⁄32" (7.1) Dia. Hole
Hanger provides more than 1/2" (12.7) space between channel and fixtures. Design Load Material: 18 gage (1.2) 120 Lbs. (.5 kN)
P1000 P1100 P2000 P3000
In
“A” mm
Weight/C Lbs kg
2 7/16
61.9
19
8.6
P5537
P5500
3 1/4
82.6
22 10.0
P2539
P1000 P1100 P2000
1 3/4
44.5
17
P3539
P3000
1 1/2
38.1
15
6.8
P5539
P5500
2 9/16
65.1
18
8.2
1 ⁄4" X 1" RHMS and Sq. Nut Included
P2539 P3539 P5539
A
5
Design Load 120 Lbs. (.5 kN)
1 ⁄8" (41.3)
7.7
1
⁄4" X 3⁄4"
Carriage Bolt and Sq. Nut Included
Hanger provides more than 1/8" (3.2) space between channel and fixtures. Material: 18 gage (1.2)
RACEWAY HANGERS P2755 P2756 P2757
A
Part Number
4 1⁄4" (108.0)
Design Load 120 Lbs. (.5 kN)
Use with channels: P1001, P1101, P2001, P5000 and P5500. Material: 14 gage (1.9)
9
⁄32" (7.1) Sq. Hole
“A” mm
Weight/C Lbs kg
P2755 9/16 P2756 7/8 P2757 13/32
14.3 22.2 10.3
44 44 44
20 20 20
P2855 9/16 P2856 7/8 P2857 13/32
14.3 22.2 10.3
32 32 32
14.5 14.5 14.5
In
P2855 P2856 P2867
A
2 3⁄4" (69.9)
9
⁄32" (7.1) Sq. Hole
Design Load 120 Lbs. (.5 kN)
Use with channels: P1000, P1100, P2000, P3000, P3300, P4000, P4001, P4100 and P4101. Material: 14 gage (1.9)
FINISHES Pregalvanized channel is coated with zinc by hot-dipped process prior to roll forming of press operations. The zinc weight coating is 0.45 oz./side per square foot of material conforming to ASTM specification A-653. Electro-galvanized parts, screws and nuts are coated with zinc electrolytically to commercial standards. (Federal Specification No. QQ-Z-325A.) Hot-dipped galvanized material is coated with zinc after being roll formed or after all manufacturing operations are completed. The zinc weight is 2 oz. per square foot of surface conforming to ASTM specifications Nos. A-123 and/or A-153. Nuts, bolts and pipe clamps are electro-galvanized. (Alternate finishes may be specified, such as pregalvanized finish and hot-dipped galvanized finish for various parts of the metal framing system. Refer to Unistrut General Engineering Catalog #12 and supplementary bulletins for the availability and appropriateness of the finish for various parts.)
7
Goto to Main PDF Menu
GENERAL FITTINGS
Electrical Fittings
Pipe/Conduit Supports
General Fittings
Nuts & Hardware
1 5/8" Channels
FOR 15⁄8" (41 MM) WIDTH SERIES CHANNEL
Page Flat Plate Fittings
82
Ninety Degree Fittings
86
Angular Fittings
93
“Z” Shape Fittings
94
“U” Shape Fittings
96
Wing Shape Fittings
101
Post Bases Brackets and Braces Beam Clamps Trolleys Special Application Fittings
Index
Spec. Metals & Fiberglass
13⁄16"
Framing System
11⁄4" Framing System
Concrete Inserts
End Caps Partition and Display Fittings
105 106 112 122 124 126 127
MATERIAL Fittings, unless noted, are made from hot-rolled, pickled and oiled steel plates, strip or coil, and conform to ASTM specifications A575, A576, A635, or A36. The fitting steel also meets the physical requirements of ASTM A570 GR 33. The pickling of the steel produces a smooth surface free from scale. Many fittings are also available in stainless steel, aluminum and fiberglass. Consult factory for ordering information. FINISHES Fittings are available in: PermaGreen II (GR), electro-galvanized
(EG), conforming to ASTM B633 Type III SC1; Hot-dipped galvanized (HG), conforming to ASTM A123 or A153 and plain (PL). APPLICATION All parts drawings illustrate only one application of each fitting. In most cases many other applications are possible. The channels shown in the illustrations are P1000, 15⁄8" square, except where noted otherwise. All 9⁄16" diameter holes use 1 ⁄2" x 15⁄16" hex head cap screws and 1⁄2" nuts – P1010, P4010 or P5510 – depending on the channel used. Nuts and bolts are not included with the fitting and must be ordered separately.
DESIGN BOLT TORQUE BOLT SIZE FOOT LBS. N.m
1⁄4" 20
5
⁄8"
5⁄16" 18
3⁄8" 16
1⁄2" 13
11
3⁄4" 10
6
11
19
50
100
125
8
15
25
70
135
170
DIMENSIONS Imperial dimensions are illustrated in inches. Metric dimensions are shown in parenthesis or as noted. Unless noted, all metric dimensions are in millimeters and rounded to one decimal place. DESIGN LOAD Design load data, where shown, is based on the ultimate strength of the connection with a safety factor of 2.5, unless otherwise noted.
80
Return to #12 TOC
